Yeah, that is my point as well. Even weirder, he hammered it down to a ball shape, but even then there would be gaps and aluminium yield would be much smaller.
In order to have a mostly perfect cast aluminium ball, make the sprue and riser holes on the side of the mould and pour in them, attaching them to the mould by a dug gate.
И вообще, неужели не нашлось алюминиевого лома кроме как полноценный рулон пищевой фольги? Отдал бы мне этот рулон, я б кучу всякого в обмен отдал. Варвар, блин!
@@xtondakonf r/conficendlyincorrect... Really how dumb you are? Rules are simple. Use foil, hammer and and polish it. This guy used not just the foil because he would need several rolls to get this much. Not mentioning he fucking melted it making it no longer aluminum foil(surprise. It has a plastic film which keeps it from tearing.)
Done right there would be no pits in the metal or necessitate that much aluminum lol, but having a solid ball of aluminum would be extremely satisfying to make
you can also do this using a microwave, put the original foil ball in and leave it in for 10 minutes, it'll melt the surface of it to smooth it out and make it more solid if you leave it for longer it melts the inside too which makes it a solid aluminum ball
You should see the molten aluminum dribble art! It's fabulous! This guy at an Art Fair made a cavern with a dragon inside holding a wizard hostage! I was very impressed with it. Very attractive and creative! I've been wanting to try it myself.
Разве он похож на здорового? Доктор Дью бы сказал что очень не здорового. Я не силён в металлургии,но чисто физически не могу понять зачем автор танцевал с молотком возле наковальни,когда надо было просто нашинковать в тигель рулон и фсё. Наверно сил т времени некуда девать?
Instructions: 1. Get foil 2. Make a large enough ball 3. If there’s parts that are falling off add a little tape 4 . Don’t hammer or sand just put it in your dryer with your clothes 5. Now sand it 6. Enjoy your perfect foil ball I just did one last week Fact: after you do step 4 you can’t add more foil to make it bigger. WARNING ⚠️ don’t use a washing machine instead use a dryer and it actually helps dry your clothes better! But it might take a few days 😊✅ Hope this helps! 🤞 👇💅✨
![แม่กลองสองใจ - ซีแกรม โตเกียว มิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/GSQfVjcr_f4/mqdefault.jpg)
Lol this feels like cheating
More like winning 😂
Фольга бы не расплавилась а просто сгорела бы наверное
@@kuza9257 да, я думаю, он уже расплавил алюминий в печи.
Work smart not harder 😏
@@chalajabsdk5783 th re n why he make foil boll lol lull
If you had to melt it then what is the reason for wasting 1 day in hammering 😂
😂😂🤣🤣🤣🤣good
Same 🤣🤣🤣🤣
exactly 🤣
She try shortcut,then he realise that finishing not come on spheres
Потому что это стеб над теми, кто делает полированые шары из фольги!)
No way he got a whole solid ball of aluminum from that sheet of aluminum
i mean it looked like there were holes in the ball, like air bubbles
Yeah, that is my point as well. Even weirder, he hammered it down to a ball shape, but even then there would be gaps and aluminium yield would be much smaller.
@@xZeroOffical he might added more aluminium many things are to be done off camera 📸
When he put the ball in the crucible there was already some type of metal in it
Right
He hammers it for fun. Who don’t go an extra mile on they’re favorite track 💪
I , I dont go an extra inch even if its my fav track.
their
I love how you end up with more aluminium after melting it, outstanding.
Probably more than 80 times the amount. It's just a random steel ball at the end 😂
The funny thing is
you think steel and
aluminum foil or the same metal
@@JemSquash94 no no no even funnier that you think Molten Steel looks like that
The video clearly showed the guy adding the ball to metal that was already in the crucible.
Heat expansion.
He's a bit confused, but he got the spirit
Waste of people’s time actually
I'd actually call it ingenuity, he got the tools for the job.
He did it for TH-cam. It's gotta have the flare
Next week on Business Insider: Why Japanese Aluminum Foil is So Expensive.
на заводе по металлу уже ищут тебя, им нужен такой экономист по металлу
😅😅😅😂😂😂😂
I'm like number 100
Ага литейщики уже ищют чтобы сломать все десять пальцев
@@WithoutAnAccount❤
@@user-jn4iz7ol4n🎉
when you want to do the foil ball challenge but you're a perfectionist:
I dunno... That ball was pitted something fierce.
Oh the porosity ...
Not even close to a perfect one, i saw some with much less impurities on the surface
Great for dodge ball
😂😂😂
I tried that once I can't reccomend
@@c-kingdodo ....was it effective though? Weather or not the consequence of said actions is recommendable is not in my interests as of now...
This is the one you can throw at the one kid who keeps getting you out for no reason
Well, at 1500 or above they likes to play dodgeball with this ball 💀💀
Melting and pouring into a mold means it is a cast aluminum ball, not a foil one
🤓
Honestly the most offensive part of this video is when you added the drink pouring sound effect.
Wondering how many people now think that’s the sound hot metal being poured sounds like
@@Sketchy_Dood I think none, or just a few 😂
In a few years, Someone will make one on a 3D Printer.
You can order one right now from a printing service
@@Alsry1 take my money!
@@StarshipSmoochers I already took your money. I’ll give it back soon. Need to go out to buy milk for my son now. Be back in 2077.
Few years? Metal 3d printers have been out for more then a few years..
😅😂🙌🔥
"how serious are you about this challenge" "yes"
I literally made this with hands without any equipments and it turned out really nice
Same bro. It took a lot of work and time but it is possible. I've actually made a few of them.
proof?
@@mikehunt5926 don't know how to send you proof but I would. It's not hard. Just time consuming. I made one for each of my kids.
@@One.Disgruntled.American ok i believe you
damn to combine a fake and a fail in one short is impressive
Фантастика! Из фольги получил шарик от подшипника. 🤣
в шарике от подшипника дырок нет
У Шуры шары.Маша рада ,хороши шары у Шуры.
Классика.
Главное зачем❓Мягко говоря...
@@user-lt1gx8iz7m 👍
Причём большие по размеру😂
Bro hammered that foil foil paper for nothing
101% nothing.
Wrong ,He did because it could fit on the pot
had to fit it in the crucible
Duh gotta shape it accordingly. Every has their own ways. Stop scrutinizing
@@XYZyt.lol use your brains than agreeing on pointless comment's
In order to have a mostly perfect cast aluminium ball, make the sprue and riser holes on the side of the mould and pour in them, attaching them to the mould by a dug gate.
That’s unbelievable. I’m very impressed.
Того что было запресованно из фольги и переплавлено в монолит очень мало.
И вообще, неужели не нашлось алюминиевого лома кроме как полноценный рулон пищевой фольги?
Отдал бы мне этот рулон, я б кучу всякого в обмен отдал.
Варвар, блин!
Всё равно, что из колбасы прокрутить фарш, а потом вылепить колбасу
Прикольно когда из алюминиевой фольги получается шар от подшипника 🤦
Да вообще бре какой то...😂
Это как раз тот отполированный шар, того кота которому нех. делать!)))
Wow. Google translate failed you.
@@gruntopolouski5919 yup sure did!
love how he went through the effort of hammering it into a ball only to use a different ball
He takes it very seriously 🤣
dude after 1 hr of hammering was like "fk this sht" and casted it lol
Feels like cheating because it is CHEATING!!!!😂
I mean most other people allready cheat. And for all the work he put in it feels acceptable. A+ for creativity
No, this is doing it properly.
@@xtondakonf r/conficendlyincorrect... Really how dumb you are? Rules are simple. Use foil, hammer and and polish it. This guy used not just the foil because he would need several rolls to get this much. Not mentioning he fucking melted it making it no longer aluminum foil(surprise. It has a plastic film which keeps it from tearing.)
Dang!!!! I wasn't expecting that result! Very neat!
I didn't expect the melted final product to have all the tiny holes on it... Neat!
Now thats....a cannonball
shoot it from a potato cannon
yes.
solid aluminum is heavy like granite.
@@richtomlinson7090 it would hurt, we are wimps
@@commonconservative7551 I'm just saying aluminum is surprisingly heavy, it's actually like heavy as a rock, and not like a soda can or foil.
@@richtomlinson7090 it is surprisingly lighter than air after working in a steel shop, then transfering to alum, fab shops
This is nice. Aluminum melts at low temp. and not toxic like lead, so this could be something I may try.
Done right there would be no pits in the metal or necessitate that much aluminum lol, but having a solid ball of aluminum would be extremely satisfying to make
Do you know what the pits actually are?
And remember this couldn't be done without the magic of my little pony friendship
the ultimate dodgeball
As unreal engine artist, it's
Base Color : White
Metallic : 1
Roughness : 0.1
as a unity dev, it’s
Albedo: (255, 255, 255, 255)
Metallic: 1
Smoothness: 1
Wow, that’s incredible. Who would have thought that could work.
You went straight to hammering the loose foil and I was thinking.. oh lord this can’t be good 😆
Nice job.
"I challenge you to make a polished foil ball!"
Challenge accepted.
you can also do this using a microwave, put the original foil ball in and leave it in for 10 minutes, it'll melt the surface of it to smooth it out and make it more solid
if you leave it for longer it melts the inside too which makes it a solid aluminum ball
Lol so I don’t think this met the “weeks to months of consistent work and dedication of hand smoothing the foil” standard.
That pouring sound effect had me laughing longer than it should. 😁 Very nice short. 🙂
Love it
You should see the molten aluminum dribble art! It's fabulous! This guy at an Art Fair made a cavern with a dragon inside holding a wizard hostage! I was very impressed with it. Very attractive and creative! I've been wanting to try it myself.
All of your creation is perfect i like it 👌
Don't work hard, work smart😎
He just added more aluminium
Oh my gosh I love your videos are so funny😊
I wanna be mad but this is the best end result I've seen so far so as far as I can tell you're winning the challenge
The Japanese guy who spent 10000 hrs polishing it: Excuse me nani tf??
Воот, полированый шарик из фольги здорового человека!
Разве он похож на здорового? Доктор Дью бы сказал что очень не здорового.
Я не силён в металлургии,но чисто физически не могу понять зачем автор танцевал с молотком возле наковальни,когда надо было просто нашинковать в тигель рулон и фсё. Наверно сил т времени некуда девать?
Танец нужен был для того, чтоб из алюминиевой фольги получился стальной шар от подшипника.
🪄🎩🐇Мэджиk
My phobia of the mini holes says no thank you💀
for a second I thought he forgot he had a forge to cast the ball but he did it lol😂
Правила безопасности вышли из чата.
Who was waiting for him to bounce it on floor ??
Wont
Wow.... what a nice work!
Great idea mate ! Well done ! 👍🏴
“If you ain’t cheatin, you ain’t tryin”
Learn about boron and covering your crucible to prevent bubbles
Really enjoying the pouring sound effects
If you had the temperature just right when pouring then it would have been really shiny and not had the sand melted into the surface.
This guy woke up and chose to work smarter not harder
Or just put it in a microwave
it would potentially damage the microwave
@@blitz4493 удивил
Don't do that
So amazingly beautiful!! 😍 ❤️
I'm impressed!
Qazi shorts ka raaz mujhe de de !
Ye to sb raaz hum ko maloom ho gya qazi
Ye raz nai mily ga tmy
Qazi ye shorts bnaanay wala hath mujhy de de
@@justforfn5860 nai mil skta
Cheating.
You do know that it’s physically impossible to make a perfectly smooth ball from foil with out melting it?
@@ivorys-ivy I've never tried. It' still cheating.
@@TheGregEgg it’s not though, the only way to do it is to melt it
It's not. As the other person said its impossible.
@@ArcaellusV427 exactly, if there is absolutely no other way to do it, then it’s not cheating
Impresionante, genial!
Wow....... 😀😍❤️👋👋👋
Literally hammered it no reason at all
When you miss some steps but arrive at the correct answer
溶かしちゃった！😮
Nice ✨️
The unexpected example of "Work Smarter Not Harder"💀
So cool!
Absolutely fascinating 😮
It should've been clearly handmade. This is the essence of traditional polished Japanese balls)
It’s so beautiful
if you were paying attention he put the ball in a crucible that already had molten aluminum in it just adding to the amount
Woooooohhh 😱 increíble 👏👏👏
I see, thanks for the inspiration.
blud wanted to be a perfectionist and take out his rage on some foil
AWSOME!!!! ❤❤❤
MY BRO WHIPPED OUT A WHOLE GODDAMN ANVIL
Bro took the challenge to another level
Nahh bro got a lil too excited in the middle of the video😂😂
I needed someone to do this. The air pockets reduce weight significantly
Great. Now I want one too.
Pure example of Work smarter not harder😂
I think this guy missed the spirit of the challenge
He’s doing it for engagement farming, well played
Very cool!
So satisfying ❤
That's super cool 😎
Кто бы мог подумать!!!👍👍👍😏🤔
I don't know why I expected him to do it the average way lol
He really said “work smarter, not harder.”
Thank you for using all the resources to make a shiny ball
Instructions:
1. Get foil
2. Make a large enough ball
3. If there’s parts that are falling off add a little tape
4 . Don’t hammer or sand just put it in your dryer with your clothes
5. Now sand it
6. Enjoy your perfect foil ball I just did one last week
Fact: after you do step 4 you can’t add more foil to make it bigger. WARNING ⚠️ don’t use a washing machine instead use a dryer and it actually helps dry your clothes better! But it might take a few days 😊✅
Hope this helps! 🤞
👇💅✨
Вот это да!!!! Вот это круто!!!!🎉🎉🎉
Amazing!
Lmao I love the soda pour. 😂