ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Big Brake Kit for EK Civic
ฝัง
- เผยแพร่เมื่อ 29 เม.ย. 2022
- EK Civic gets 5 lug conversion & big brake kit in the front using CRV, RSX & TL Type S parts.
1st Gen CRV Spindle/knuckle
1st Gen CRV Bearings
RSX Base Wheel Hubs
TL Type S 2pc Rotors
TL Type S Brembo Calipers
Music by @skipmade
/ @skipmade8799
Music by Charangos SlyRax
Glad to see you back to making videos !
Did you have to do anything with the brake booster and master cylinder?
Nice 👍...
Did you have any issues with CRV knuckles placing the outer tie-rods in a different location and throwing off the toe setting?
Great use of the Razor Ramon meme 🔥
Do you have or can get the measurement from the center of the hub to the outside of the caliper? Need to get the minimum radius or diameter for the inside barrel of wheels.
Looks very good 👍🏼
Can you fit a 16 inch wheel over this brake setup????
AYOOOO 🔥🔥🔥🔥💯💯
Love it
what year rsx hubs ? what year TL Rotors and calipers and what type of axles your using
Hey Man, first gen rsx base hubs , 04-08 TL type S rotor and caliper , spindle is from a first gen CRV , and stock civic 32mm axles . (if using 36mm axles you want first gen rsx type s hubs)
@@SonsOfAnxiety thank you brotha reall appreciate it
Will this clear 16”
Rims?
Would those 16s still fit with that setup? 🤔
Not sure man i feel like theres a bit of room between the 17 and caliper so i assume 16s will be good. Havent gotten a chance to test fit
comen together!
What is the diameter of your knurl
Would the RSX base hubs fit an Integra knuckles? Or it has to be CRV?
hey bro, highly doubt they would but ive never tried it.
@@SonsOfAnxiety thanks for the reply. I’m asking because I had my DC knuckles chopped and welded for the air bag setup. If I went with a different knuckle, I wouldn’t be able to slammed the front all the way down. Are you going to 5 lug the rear? Thanks for the video it helped out a lot.
What size rotor disc you got on? Thanks
310x25
@@SonsOfAnxiety im in the process of deciding to get a brembo brake kit from a newer type r (fk2) on my ek..would i follow thesame exact steps? Thanks!
@@charvlim5159 I would imagine the sizing of the calipers and rotors are all different unfortunately
Will these crv spindles fit on an eg?
99% sure that first gen crv axles will fit Ek , Eg and Dc2
@@SonsOfAnxiety sweet, definitely saves me some money rather than getting the itr swap
Size rotors?
310mm
@@victormorales3379 tanks