How To Make Motion Sensor Light Switch using CD4017 & IR sensor at Home

In this 4017 project, I have shown how to make motion sensor light switch using CD4017 & IR sensor for the washroom. I have made the complete motion sensor circuit on a homemade PCB and use this circuit as the automatic washroom light switch. When anyone enters the washroom the IR sensor senses the motion and turns on the light and when he or she exit from the washroom the IR proximity sensor again senses the motion and accordingly turns off the light automatically.
During the tutorial video, I have shared the complete 4017 ic project circuit diagram, so after watching the video, you can easily make this simple motion sensor project using 4017 IC and use it as motion-activated light or motion-activated alarm.
To Download PCB Layout for the CD417 projects please visit the following article
easyelectronicsproject.com/mi...
Required components for the CD4017 project
1) CD4017 IC
2) LM358 IC
3) BC547 Transistor
4) 100uF 25V Capacitor
5) 1000uF 25V Capacitor
6) 220-ohm 0.25watt Resistors - 4 no
7) 10k 0.25watt Resistor
8) 10k Trimmer
9) LED 5mm - 2no
10) IR LED pair (Detector & Emitter)
11) 1N4007 Diode
12) 5V SPDT Relay
13) Connectors & IC Base
14) Acrylic sheet
I have used the 5V mobile charger to supply the circuit. Please take proper safety precautions while working on 110V or 230V AC.
You can also adjust the sensitivity of the motion sensor using the 10k trimmer.
After watching the video, you can easily design this motion sensitive light switch circuit for your home.
If you face any issues please let me know in the comment section.
#motionsensor #4017ic
------------------------------------------------------
Thanks For Watching...
✅ SUBSCRIBE ✅LIKE ✅SHARE ✅ COMMENTS
Website: easyelectronicsproject.com/
Facebook: / techstudycell
Instagram: / techstudycell
Telegram: t.me/techstudycell/
-------------------------------------------------------
Other useful videos:
How To Make Motion Sensor Light switch on the breadboard
• How To Make Motion Sen...
IR Remote Control ON OFF Switch using 4017 IC & Relay
• How to make wireless I...
How to calculate resistor value for LEDs in a circuit for 9V and 12V
• How to select resistor...
How to make Remote Control Switch on the breadboard
• How to make Remote Con...

[@TechStudyCell]

To increase the range, Pls refer to the new video on Motion Sensor Switch: th-cam.com/video/c_dnE6RRMCA/w-d-xo.html

[@deshanpraboda9844]

What device can be bought instead of the 10k trimmer ? It is not available in the market to buy 10k trimmer device ?

[@its_rahul7519]

Hello sir mujhe thodi help chahiye

[@its_rahul7519]

Ye circuit meine banaya hai pr sirf light off ho Rahi hai on nhi ho Rahi hai

[@Esha648]

@@its_rahul7519 ap ny project banaya ha mujhy b bata dy k project kasa bana ha fail tuo ni huwa .ma ny b banana ha ma ny uni my submit karwana ha. or project k part kaha sy buy kiye hy.

[@blackblack9352]

You do not know you are reviewing, but your ideas are beautiful and we hope that they will be clearer and without abbreviation because some people do not have an electronic initiator

[@humbertoleal7683]

Excelente video, muy bien explicado, mil gracias. Saludos desde Bogota - Colombia.

[@TechStudyCell]

thank you

[@NarayananNeelakantan_NN]

Awesome, it would be useful if you also give a link where to buy these components online and how do we package it (I mean how to get a outer box where this pcb will fit in?)

[@ostadu3695]

THANK YOU QUITE A LOT!!! You are A Teacher. So thanks again.

[@TechStudyCell]

You are welcome

[@satishagowda4752]

Aa@@TechStudyCell and a did

[@alphahelix91]

Die hier gezeigte genauere IR - Reflexlichtschranke mit dem Diff OP LM 356 ist hier besonders recht gut konstruiert. mit dem Diff - Infrarotsensor - Eingang.
Besser als die alten IR - Bewegungsmelder. Der CD 4017 ist hier der Red like - reine analog IC Schalter (natürlich ohne Redinductorrelais).
Tolle Schaltung.👍👍👍

[@jitendrasomaiya698]

Best Ever Diagram presentation on Actual Circuit Board
Jai Engineer
Jai Hind

[@mohamedrady6676]

work great ,thanks for this nice project

[@vicenteneto1814]

Parabéns pelo trabalho! Ótima aplicação do circuito.

[@AhmedKhan-li4xd]

So simple way for teaching

[@dhineshd94]

Man thanks for this awesome project u really awesome made this without a pcb with a clear layout ❤️

[@TechStudyCell]

Glad you like it!

[@nitinpatel5447]

Sir ye project kaam nhi karta maine Banaya or comment me bhee bataya hai...?

[@mirzahussain9380]

@@nitinpatel5447 tumhe banana nahi aaata ye kam karta hi maine banaya hi

[@msfreefire7575]

@@mirzahussain9380 did your work properly

[@yashdahibhate7517]

100% Working hai kya??

[@CihanFratbeykoznette]

Fikrine sağlık kardeş başarıların daim olsun

[@user-og7kd1ie3w]

Your project is very good and admirable. I also want to make your project, but it's not easy to buy parts. I'd appreciate it if you could tell me if there's anything in the set or if it's a purchase site.

[@saralprabidhi1889]

Great video thank you!

[@Exos_Channel]

Thank you very much for the project.

[@TechStudyCell]

Welcome

[@yashdahibhate7517]

101% working hai kya??

[@anokhautomation4453]

Nice useful project.

[@rogeriolatterza9841]

Very Didatic!!
Congratulations from Brasil!!!!!
I subscribed to your channel!!!!

[@TechStudyCell]

Thanks

[@udhayakumar9107]

Nice invention 👍🏻

[@edilsonferreira239]

I really like your videos. Tks

[@TechStudyCell]

Welcome

[@elmahdieljazairielmountada9563]

Amazing project but please I want to know about the kind of 5 volts to use , how many ampers ?? Thank you !

[@melancholyme5708]

Awesome bro 🤜
thanks

[@NewPew]

Great job! Nice channel! 👍👍

[@TechStudyCell]

Thank you

[@PaQassam]

Hi, i like your video. But, how about using "230VAC to 5VDC (3W) Converter/Regulator" to supply our sensor and also the relay instead Phone Charger. Thanks.

[@wilxap]

Hi, friends! I'm from Brazil and i lovely your project. What's software do you to used to designed the schematic? Congratulations, i subscribed.

[@randyjones4044]

nice gives me confidence

[@MegaYuas]

dear sir
thanks alot i was also seraching for thus project and special thanks for the pcb diagram i printed it out and made circuit without any glitch

[@TechStudyCell]

Thanks for the feedback

[@sarthakkumarmishra513]

Contact me for business

[@Believer_268]

I am also trying for the same project but the layout after printing on A4 size paper doesn't come out as the required measurements..😢plz help how have you printed it?

[@WomenFitHealth]

​@@Believer_268 😃

[@vobinhthu5299]

This project is very good!

[@TechStudyCell]

Thanks

[@divyamnair8821]

@@TechStudyCell block diagram?

[@yashdahibhate7517]

101% working hai kya???

[@miyaseelanka6319]

Very good job... High demand

[@carlosdavila4164]

saludos desde colombia excelente trabajo

[@koteswararaoneelapu3432]

Superb sir.....getting person counting

[@astronic4522]

Good job brothers

[@paladin11C40]

Is there anyplace I can find a board already made? I am trying to find a motion activated security light with IR lights instead of visible lights. This will allow my security cameras to see farther when something trips the light, but the thing that trips it wont ever know.
Thanks.

[@movieshub3506]

Behtareen bhai jaan bahot ala

[@basavarajshilwant6650]

Nice thing of energy saving item.

[@TASTYFOODSandEATING]

Very very nice project ❤❤❤❤

[@inspirationalwords6727]

Good project & very easily explained

[@TechStudyCell]

Thanks

[@yashdahibhate7517]

101% working hai kya???

[@mrsaiful7776]

Tqvm sir 👍🏻

[@kathirvelm1213]

Can you inbuilt the 220v to 5v circuit in the same board

[@shivmsoni]

Just amazing ......
👍👍

[@TechStudyCell]

Thanks

[@tirupatirathod7692]

Your projects are save the electricity

[@lsneiva]

Excelente! 🙂👍👏

[@nature740]

Very good project

[@engineer6877]

For this video you deserve a like, subscribe and big thanks

[@prasanthk2478]

Very good
Congratulations

[@Kishore-uu2ym]

Can two sensor can be combined to switch off the lights after climbing the stairs or any other option?

[@sergiomendes3653]

Boa tarde. Eu vou montar esse projeto que você publicou ele e muito bom pra usar no banheiro. Mas eu tenho uma dúvida. As pontas dos terminais dos componentes vai servir pra fazer as ligações elétricas? Obrigado. Brasil.

[@irfanbayram2576]

hi iwas one question the pot raplace 20k and relay is 12v can cahnge any part of project because i make it but relay continue is working how to

[@benzhducs9400]

thank you very much sir for sharing this idea and I'm interested on it. I have only 1 question sir, is it the same materials needed for 220v volts supply? If not kindly update me sir, keep up the good work sir.

[@amulyatb5634]

Sir plz tell me what you have connect for vcc out and gnd we have mini project on this so we decided to make this project there is a small problem we don't know what you have to connect for that

[@bahmannosratollah7017]

Very nice job, 👍👍👍👍👍👍👍👍👍👍

[@rajkumartamang6462]

Can we add LDR so that it only activates during darkness?

[@ferdinandmaglangit3284]

Wow! Amazing...

[@ameenkhan.a7827]

Which component did you put in out, gnd and vcc points? Please reply I almost made the circuit.

[@mahaali89]

can I replace this switch with the main switch? Like i want to install it in my home without wires looking like that. Can I use the wires that already connects to the main switch from inside the wall?

[@mirzahussain9380]

Hi I make this project its working good it is very easy to make this project thanq for circuit diagram thanq somuch

[@Believer_268]

Hey bro 🤗
I am making the same project. But the measurement on the print on A4 paper is different than the given...how did you get proper printout? Plz help..😢

[@s.i.rahman4380]

I want to ask you that the lamp and pluck we have to connect each other or separately please tell me. And I have another question that you have taken some yellow color is this a wire or something else.

[@toohsynsyyn3572]

Very good thing sir I like this very much

[@neiljoshuadejuan6321]

Where can we access or get the circuit diagram? that u placed on the acrylic sheet sir?

[@TMCreations]

Truly amazing.....

[@TechStudyCell]

Thanks

[@karbalastatus7270]

Any link for components which are used in this project

[@tsaguelegrand]

Hello ! Thanks a lot for the video but please, can I see the step by step soldering of this circuit ??
Thanks in advance

[@JoseCruz-zr7ew]

Exelente circuito me gusta pero donde compro esas tabletas para comprarme unas grasias por su tiempo

[@alseragiwail]

Very excellent video many thanks

[@TechStudyCell]

Welcome...

[@melplishka5978]

Awesome job

[@ivan1290]

Excelente joven, muy práctico. Si ud m permite lo usaré en una idea.

[@vinitamehta6984]

How did you connected the 5v charger to the circuit

[@ankoprod9821]

Wow, that's super cool! Can you make a wireless one ??

[@vengadeshkumar1558]

Your explanation is simply superb. So i subscribe your chennal. Please upload a video for spot welding machine to weld li-ion battery

[@jairo6001]

No JLCPCB no problem. So creative

[@habtamusium8646]

nice work!

[@md.tarikulislam3695]

nice diagram.

[@mnunez6153]

may i know how much power does the circuit consumes in standby mode?

[@jennhchinchen6002]

謝謝您的分享

[@P-boonchannel]

Hello, Good Idea my friend

[@ThusithaThanthirige]

Great Work

[@TechStudyCell]

Thanks

[@aadarsh8306]

Pretty cool

[@dickybremahaganta8689]

is the IR LED pair the same as a photodiode?

[@dwiindri3491]

Ilmu yang anda. Berikan sangat bermanfaat buat kami terima kasih👍👍👍👍👍👍👍👍👍💯👍💯💯

[@vergelreyes7315]

Hey can i ask a question if CD4017be and CD4047be is same function?

[@damunupolapangnananda7237]

Hi.
Me simbal edala thiyana vidiha ganna puluwan kamayak thiyeda

[@LISTENINGfull]

motion sensor with some light or dark night functioning?

[@seemakhalidseemakhalid352]

Very nice job Sir. Frome Pakistan Muhammad khalid khan Electronic Shope Clifton karachi. Thanks 👍 a lots Respactable Sir

[@study_tent]

Can you make my final year project

[@cyancarlgalanza3664]

Can u use module relay?

[@nizarmohammedhabibhissain5698]

Thanks for eddition

[@ossamamohamed2754]

Thanks is not enogh for this great mind I wish you all the best

[@TechStudyCell]

Thank you too

[@sarkar269]

how can find the elictric diagram do you have link
thankyou

[@nirajdhodia8167]

Which volt lamp you used in this project

[@harshbharti-1772]

Bhai ye apne circuit me out - gnd -vcc ke liy jo terminal nikale h uska kya use h bhai, muje please jaldi se jaldi reply krna.

[@abhijeetmandal2263]

Good job👍👍💯

[@TechStudyCell]

Thanks

[@lp3jakarta72]

hi bro, what if you use 220 volts ?.

[@AnilPatel-qg9qv]

Thank you very much for the project. I need a circuit of pir sensor for outer gate to alert for visitor

[@yashdahibhate7517]

aapne bnaya hai kya ? aur 100% working hai kya??

[@tanveergsaudagar]

Sirji yejo pcb banaya hai aapne ye kitne inch" ka hai
Or ye connector &ic base alag alag pins hai isko electric shop pe kya bolenepar milega

[@jvrao6904]

I really like your videos

[@TechStudyCell]

thanks

[@telugutechgear5932]

Great work bro

[@TechStudyCell]

Thanks

[@yashdahibhate7517]

101% working hai kya???

[@elisabethsoukou1139]

Hi boss i do your projet he work i like it , is very intersting

[@clashleader2012]

Do we use an AC voltage of 220 volts without any problems?

[@monstermsgaming1119]

Does we need to connect to ac supply or 5v DC is enough bro

[@nature740]

Thanks bro

[@veeem3964]

Very nice project and parts payed out well. How can I get a print out of the circuit board you used

[@TechStudyCell]

Check description

[@mazenboureslan8727]

Thank you bro. I am not sure if the same can be used to room light control. Because I may enter the room triggering it ON. But somebody else might come to visit me, in this case he should trigger it OFF again.
Right ?

[@TechStudyCell]

Yes. It can be used for toilet light

[@vinittomar4515]

Use two IR sensor and count +- entry based on the two IR reading( if first sensor turned on and after that 2nd sensor turned on than entry count it as +1 and turned on the lights) we did similar project in colg