HID Bulb Replacement with adaptive head-lighting. This covers bulb replacement into headlight assembly, with the assembly already removed from the car.
Mr Carver, thanks so much for making this video, exactly what I needed, it’s a shame the bumper has to come off to take care of replacing the HID bulb! lots of work.
thank you so much for the video . when i saw can burn , shock or kill on the heat sink I was a bit nervous . You made it simple . THANKS !! One question . the small rods with allen head screws that turn are they for headlight adjustment up and down .
Great video...no one else has the steps needed to remove/replace the xenon bulb...good call on the screw size for the bracket...I was trying to twist it out like Austin Powers trying to rip the mask off the old lady..."why won't this come off..."
Kimberley --- Is there a way to fix the driver's side shutter? I read that there has been an issue with the wiring to the solenoid that controls the high beam shutter on the CTS with HID Xeon bulbs. Any informtion or links would be great. Thanks
There might be but some were some play but buy one instead on a junk yard or try to pop yours open and take out you solenoid and try to search for one online
I don't buy the don't touch the bulbs I just put in a hid low beams high beams and fog lights I'm sure my hand touched the bulbs and still working 2months so that within a second idk there are magnetic screwdrivers so you don't loose your screw
I think you should film this through a much narrower slit so the video is less than a quarter inch wide, then you'd be good to go Why people think such a narrow video is a good thing is beyond me
Just getting started today on my 2013 CTS4. Good thing I watched this video before I started. Thank you!
Thank god for you- several folks just skip over this step and install whatever led or other bulb - gracious
Mr Carver, thanks so much for making this video, exactly what I needed, it’s a shame the bumper has to come off to take care of replacing the HID bulb! lots of work.
Great video! Took me forever to find the video on this. Glad I found it, bulb was expensive but I know I saved money not taking it to the dealership.
Thank you so much! This is the only video I could find replacing this bulb!!
Thank you!!!!!! I did this myself ...with your help GOD SEND!!!!!!
Woohoo.thankz just what I was looking for .two screws..I was twisting and turning thank God I didn't break it.thanks a lot for the video!!!!!
Thank You, Thank You...no one else has this video on how to remove this HID Ds1 light bulb !
thank you so much for the video . when i saw can burn , shock or kill on the heat sink I was a bit nervous . You made it simple . THANKS !! One question . the small rods with allen head screws that turn are they for headlight adjustment up and down .
Great video,,thanks for the help it goes a long way!
You’re the man! Exactly what I was looking for, thank you.
Great video...no one else has the steps needed to remove/replace the xenon bulb...good call on the screw size for the bracket...I was trying to twist it out like Austin Powers trying to rip the mask off the old lady..."why won't this come off..."
Thank You!!!!! I've been looking for this video for 2hrs!!
Thanks for the video. It helped out tremendously this afternoon!
Your welcome. If you need any more help just let us know.
Erik Wenrich Your welcome
is there a video on how to remove the headlight itself from the car?
Thank you. Exactly what I was looking for.
Great video. I'm just wondering if you can say precisely where the shock danger comes from?
This video was a lifesaver, the dealership tried charging me $550, I purchased the bulb for $99 and a star tool for $5.50, labor was free.
Wtf were the hell you bought them from search on amazon for d1s hid bulbs and you can find them for $25 dollar for both of them
Yay napa charged me hundred
Where did you purchase you bulbs
@@marcusthomas9289 Auto Zone
Thanks was about to change all my lights gor my 2011 cts coupe looks easy
Yup plenty of videos how to get off. But needed your more
Very helpful. Thank you.
Mr. Carver I have 2008 CTS hid the low beam works but no high beam would it be the ballast?
Thank you, worked for me!
What size are the to little screws on the bulb?
What size are those screws & does anybody know where to find them??? Doing my brothers bulb replacement & they didnt have them on so its not secure.
Is this the light bulb that turns on the long light on the outer side of the headlamp?
Would this be the same for a 2013?
where did you get the bulb, I bought one but it was white and had a yellow tint. I have the xenon and they have a slight purple to it
Use amazon searching d1s hid bulbs
Then look for the ones with 8000k those are the white bright ones
Great Video mate! What size of screw is that? Is it T15?
I was able to get both screws loose using T10.
Kimberley --- Is there a way to fix the driver's side shutter? I read that there has been an issue with the wiring to the solenoid that controls the high beam shutter on the CTS with HID Xeon bulbs. Any informtion or links would be great. Thanks
There might be but some were some play but buy one instead on a junk yard or try to pop yours open and take out you solenoid and try to search for one online
My torx screw is done for how can I get it out
Thank you sir
Very helpful video but I hate the Cadillac cts I have the same model and my bulb went out and as of everything else!
Great job ,, but how u remove headlight ? Did u remove bumper ?
Salman Jan You have to take the bumper off then the headlight. It has I think 10 clips holding it on.
Where's the headlight adjustment screw?
What is the little white bulb called that sits above the emergency lights
Daytime bulb or the turning signal bulb
Does that go for the 2010 cts too?
Yes most probably btw make sure you buy the right bulb
He does remove the headlight from the plastic.
He bought the bulb online from a place in cali.
thx！
Hidnation.com that's where he got the headlights at.
No it was a BLACK 2008 Cadillac cts
Then I guess you got lucky Jackson jones.
I don't buy the don't touch the bulbs I just put in a hid low beams high beams and fog lights I'm sure my hand touched the bulbs and still working 2months so that within a second idk there are magnetic screwdrivers so you don't loose your screw
I think you should film this through a much narrower slit so the video is less than a quarter inch wide, then you'd be good to go
Why people think such a narrow video is a good thing is beyond me
I have an iPhone so this is what it takes.
Scotti perrilloux the driving lights
That headlamp cost 600-900 dollars
Is that where I install my projector demon lights? Because can't figure out how to install my demon lights