turn cheap bike into programable powerful ebike using "FLIPSKY Mini FSESC4.20 SMART"

แชร์
ฝัง

ความคิดเห็น • 249

  • @jonasmeier417
    @jonasmeier417 2 ปีที่แล้ว +25

    First of all you need to have creativity, imagination and good ideas. Secondly must do it, give it a try. While others break their heads, draw something, have sleepless nights etc., you just do it. You actually really work on things. And this is extremely great! Of course sometimes it needs improvements, but your work and builds are amazing! You are a great inspiration!

    • @EmonWBKstudios
      @EmonWBKstudios 2 ปีที่แล้ว +5

      No, first you need to have money to afford the tools, materials, and time to even start a project like this because we live in a broken world where we must weigh our dreams against our survival.

    • @CARandDRONE
      @CARandDRONE ปีที่แล้ว

      @@EmonWBKstudios maker space.

    • @DArk-qx3du
      @DArk-qx3du ปีที่แล้ว

      Just because it all in a few minute video does not mean it didn't take days and days to make or that there was no drawing, sleepless nights, re-dos of things that didn't work etc. That is the magic of video editing. But to me all that work and determination we don't see makes it even more impressive, not less.

  • @odduser1634
    @odduser1634 3 ปีที่แล้ว +16

    Love how he reused each part, and never made a mistake.

  • @benc8386
    @benc8386 3 ปีที่แล้ว +7

    Amazing work with very basic tools, scrap metal and old bikes. 👏👏

  • @suhassasuke7435
    @suhassasuke7435 3 ปีที่แล้ว +12

    one of the best DIY ebike build i have seen @Albert. Thanks for this video. Motivated to build my own DIY ebike.

    • @berntsrensen1217
      @berntsrensen1217 2 ปีที่แล้ว +1

      Well it's one of the badest i have seen, you shuld search some more befor you start

  • @bronzebackanglerharden3482
    @bronzebackanglerharden3482 2 ปีที่แล้ว +5

    Love it!! Nothing fancy about it!! Vice grip drill and an angle grinder is all this dude uses and is very crafty!!!

  • @smudgiebear6451
    @smudgiebear6451 3 ปีที่แล้ว +63

    I'd be surprised if that rear frame lasts, it needs more that one fixing point, not counting the shock, it will just twist under the pressure

    • @RiderBlitz1.0
      @RiderBlitz1.0 3 ปีที่แล้ว +3

      Maybe, maybe not

    • @amitsoni5234
      @amitsoni5234 3 ปีที่แล้ว

      L
      ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

    • @jasonhache389
      @jasonhache389 3 ปีที่แล้ว +6

      that thing is a death trap

    • @michaelmahoney1205
      @michaelmahoney1205 2 ปีที่แล้ว +4

      Yep the rear end looks a little rinky dink. And that's a lot of steel I wonder what the bike weighs?

    • @murph1414
      @murph1414 2 ปีที่แล้ว +3

      When you know just enough to get yourself in trouble - Darwin.

  • @SadSadDeadM
    @SadSadDeadM 3 ปีที่แล้ว +79

    That's not far away from literally building a bike from scratch

    • @anikhalder7734
      @anikhalder7734 3 ปีที่แล้ว +1

      অংশ অগা না অথচ াোঅঅাাঅাাাাা

    • @skaybaltimore
      @skaybaltimore 3 ปีที่แล้ว +2

      I was going to say...why even bother with that cheap bike to begin with. He basically (skillfully) destroyed it anyway.

    • @archietheproto7706
      @archietheproto7706 3 ปีที่แล้ว +3

      @@skaybaltimore because he used the frame, which isn't very easy to build exactly right

    • @skaybaltimore
      @skaybaltimore 3 ปีที่แล้ว

      @@archietheproto7706 OK. Fair enough.

    • @vazorrush4333
      @vazorrush4333 3 ปีที่แล้ว +2

      @@skaybaltimore well maybe because cheap bikes are made of steel, not aluminum or carbon. you can weld steel but not aluminum or alot of other more expensive metals

  • @sicat2345
    @sicat2345 3 ปีที่แล้ว +2

    WAW! Congrats! New version ng fsesc4.20 smart mukhang solid. Sana walang issue.

  • @stanislavvasyliev3899
    @stanislavvasyliev3899 3 ปีที่แล้ว +6

    Wooow man! You have a golden hands!!!
    Be inspired!))

  • @RiderBlitz1.0
    @RiderBlitz1.0 3 ปีที่แล้ว +4

    Amazing just
    Just amazing, love it
    I was stuck at how to make a point for rear suspension, but you helped me, thanks so much 💖💐✌️

  • @Rob337_aka_CancelProof
    @Rob337_aka_CancelProof ปีที่แล้ว +1

    Also I'm curious because I've often wondered about this but I've never seen one before. Have you ever tried to make or seen anyone else make what I guess you could essentially call a skinny trike where the distance between the two rear wheels is only about a foot apart but which I'm speculating would have the stability of a 15 - 18 inch wide rear tire and effectively a very stable platform for a huge DC motor (DIY Deathtrap). Ideally out of 3in wide tire to minimize drag while still maximizing stability

  • @fraaggl
    @fraaggl 3 ปีที่แล้ว +1

    i love how youtube make it look like it's easy to build..... The number oh hours of manwork is incredible !

    • @cameronmurphy7493
      @cameronmurphy7493 3 ปีที่แล้ว +1

      Yeah your right, how about some 4 day long videos

  • @jgjgggjhn
    @jgjgggjhn 5 หลายเดือนก่อน

    Never would've even thought of that idea thanks I will try something like that myself

  • @Rob337_aka_CancelProof
    @Rob337_aka_CancelProof ปีที่แล้ว +1

    You had an excellent vision of what you wanted and set out to accomplish fabricating it but I'm having trouble understanding why it is you started with a fully functional working bicycle when it seems like you could have easily done the same thing with a bike that has been completely destroyed run over or just a handful of bike parts from bikes that no longer worked and no good for any other purpose then taking up space in the landfill or recycling bin rather than what looked to be a brand-new bike.

  • @organicintelligence6431
    @organicintelligence6431 6 หลายเดือนก่อน

    Well done I wish I had a shop to do some nice work like this!

  • @danjay9562
    @danjay9562 2 ปีที่แล้ว +5

    Great work but the changes to the frames integrity seems very dangerous.

  • @kulastripstv6826
    @kulastripstv6826 3 ปีที่แล้ว +1

    Galing mo talaga idol.. Turuan mo na Ko... Great built.. Keep it up!!!

    • @lanzgalang5028
      @lanzgalang5028 3 ปีที่แล้ว

      Madami future yan

    • @Evelyn-z1h7u
      @Evelyn-z1h7u 6 หลายเดือนก่อน

      I wish I had a welder lol

  • @AboxofMonsters
    @AboxofMonsters 3 ปีที่แล้ว +2

    Nicely done!
    I like the extended rear . I have fat 4.6” tires no suspension but the tires take it up.

    • @captaincaveman8532
      @captaincaveman8532 3 ปีที่แล้ว

      Dang I thought my 4" tires were big. Didn't even know they made them in 4.6".

    • @AboxofMonsters
      @AboxofMonsters 3 ปีที่แล้ว

      @@captaincaveman8532 I run high pressure bro 🥳👆 I think I can get 6 inchers if I push it.

  • @vaso4513
    @vaso4513 3 ปีที่แล้ว +11

    where did you by the hub motor ? and what was cost ?

  • @Leafyfpv
    @Leafyfpv 3 ปีที่แล้ว +2

    pretty smart how you modified the frame... Props!!

  • @thebullseye2000
    @thebullseye2000 3 ปีที่แล้ว

    You are a very good metal worker and ebike maker NICE.

  • @Rob337_aka_CancelProof
    @Rob337_aka_CancelProof ปีที่แล้ว

    I'm curious about stability issues because at 40 miles an hour something being just a little off centere or not balanced properly can extrapolate out to be quite a problem and a small vibration at that bikes normal intended speed could make it ride like a bucking bronco you're hard-pressed to stay on for 8 Seconds. I've seen someone warp a motorcycle so badly from welding on it's frame without structurally changing it very much to the point where it was quite unpleasant to ride once it was up to speed and there's quite a difference between a 40 mile an hour bicycle and 200 mile an hour motorcycle but it seems the same problems could easily manifest proportionately speaking when you scale it up.
    Is that why you change the frame so radically to compensate for those type of problems or was that just Whimsy because I was a little confused by that part where you flip the back end over and compressed it vertically with a pivot point just behind the bottom bracket and very different suspension from how it started?
    Also did you purchase the battery pack or fabricate your own because it looks to be a real Beast of a battery filling most of that triangle completely so could you tell me a little more about it, specs price where you bought it or if it's your own creation specs and capabilities and how it's working out for you as far as did it meet your expectations or is there something that in hindsight you would have done differently?

  • @Uwe342
    @Uwe342 9 หลายเดือนก่อน

    Hello, Flipsky 75100 has the erpm setting. What if you don't know the exact erpm of the engine? And is it necessary to provide the exact ERPM value?

  • @FlyingFun.
    @FlyingFun. 3 ปีที่แล้ว +2

    Great work.
    I just bought a full suspension bike and fitted a kit.

  • @seme6445
    @seme6445 3 ปีที่แล้ว

    did he weld steal and Alu togehter ???? seams more like a death trap in my mid but as long as it works.

  • @alexeynastenko5189
    @alexeynastenko5189 3 ปีที่แล้ว +1

    Good evening! I looked at your Master class on creating a bicycle bike - fantastic sticks are great !!!! Please tell me what material is the bicycle frame aluminum or metal, which one? and with what electrode did you weld? Best regards, Alexey Nastenko Kazakhstan

    • @albertnario4877
      @albertnario4877  3 ปีที่แล้ว +1

      depends on your budget.. but for me steel is the best..

  • @21degrees
    @21degrees 3 ปีที่แล้ว +2

    Excellent...We need more 60kph ebikes!

  • @siyamislam5821
    @siyamislam5821 2 ปีที่แล้ว

    OMG neo. You're a genius⚡🔥

  • @Mr_Ravee
    @Mr_Ravee 3 ปีที่แล้ว +1

    Level Up brother..Good job Albero😎

  • @calessom3168
    @calessom3168 3 ปีที่แล้ว

    Well that looks simple enough, I will start mine straight away!!!!!

  • @bill123f2
    @bill123f2 2 ปีที่แล้ว

    You make the battery pack with this small 3,7volt li ion battery ?

  • @Susanoo-Amaterasu
    @Susanoo-Amaterasu 3 ปีที่แล้ว

    Good job 👍 You have golden hands 👍

  • @ahmedmoustafa34
    @ahmedmoustafa34 2 ปีที่แล้ว

    Absolutely fantastic 😊 really good 👍

  • @jathin27
    @jathin27 3 ปีที่แล้ว +2

    I was the one told you to build e onewheel remember?

  • @ELWC-s2y
    @ELWC-s2y 3 หลายเดือนก่อน +1

    Its road legel?

  • @Luisppk2812
    @Luisppk2812 3 ปีที่แล้ว +3

    I really love your work, but in my actual country (Perú), there's a law prohibiting motor bikes likes yours (self-made). It can only be use with warranties from a well-known brand.

    • @albertnario4877
      @albertnario4877  3 ปีที่แล้ว +2

      buy cheap one and make it extreme 😅

    • @georgecarlinn6288
      @georgecarlinn6288 3 ปีที่แล้ว +1

      That is because tested bikes satisfy safety standards which self made bikes don't,

  • @pommelbaer
    @pommelbaer ปีที่แล้ว

    Liked everything about it!

  • @TheDemon-cl2th
    @TheDemon-cl2th 7 หลายเดือนก่อน

    Could u take the peddles off n leave them off

  • @cjcrcr2648
    @cjcrcr2648 3 ปีที่แล้ว

    That's the best idea I've ever seen ill also try this

  • @EboyzLondon
    @EboyzLondon ปีที่แล้ว

    Well done bro, BUILT NOT BOUGHT

  • @TheGrkBoy
    @TheGrkBoy ปีที่แล้ว

    Bici molto bella,e funzionale .Rispondente alle caratteristiche date,arrivata con 20 giorni di anticipo,molto elegante.

  • @RahulSingh-ie6po
    @RahulSingh-ie6po 2 ปีที่แล้ว

    What's electronic equipment installed in this cycle

  • @danielolan9511
    @danielolan9511 2 ปีที่แล้ว

    Saludos desde puerto rico Amigo tremendo video mucho éxitos

  • @AboxofMonsters
    @AboxofMonsters 3 ปีที่แล้ว +4

    Becareful at speeds over 25 mph. Those are not speed rated tires it’s no joke they pop and peel instantly and your on your face in a second and there’s no controlling it I blew one at 30 and bout got killed. Nice build ! You should specialize in utility fat tire bikes for off road lots of hunters buy em.
    They buy trailers to.
    I have a upgraded Pc control I can’t figure how to marry it to by hunt bike( I upgraded to a sine wave unit) I have 5 wires out of like 20. No schematics 😡 no support.

  • @AllLifethingschannelyt
    @AllLifethingschannelyt 3 ปีที่แล้ว +1

    Need one so bad that’s cool 😎

  • @rebbye59
    @rebbye59 3 ปีที่แล้ว +1

    super great , j 'adore et tu fais tout !!! tu as de l'or dans les mains...vraiment, bravo !!!

  • @benjieventura8006
    @benjieventura8006 2 ปีที่แล้ว

    what is the brand of your 1500 watts hub?

  • @DArk-qx3du
    @DArk-qx3du ปีที่แล้ว

    LOL, So all this great work to make what is already available in parts or the whole on the market. What you could have done was rebuild/build it to use Honda C90 wheels and tires and a mid drive motor. That would have made it a uniquely durable, puncture resistant, long lasting, easily maintained and less expensive to own in the long term E-bike. But fun video, Thanks!

  • @goglogoglo5354
    @goglogoglo5354 2 ปีที่แล้ว

    What volt battery? , ampere ?
    Discharge ampere?

  • @africans1968
    @africans1968 3 ปีที่แล้ว

    When you brake, does it do it well?

  • @karunagarankarunagaran6043
    @karunagarankarunagaran6043 3 ปีที่แล้ว

    This hub motor is water proof?

  • @a-aron2276
    @a-aron2276 3 ปีที่แล้ว

    Unreal, but for your welds and lungs, take off the paintwork around the area. Some decent skill you have though👍🏽 that torque arm will help with the spreading but have something that can enclose the axel so it can't drop out. The regen will cause alot of rocking on the axel. Unfortunately I'm speaking from experience on that one 😕

  • @princebanini
    @princebanini 2 ปีที่แล้ว

    Hello, great video. The FLIPSKY Mini FSESC4.20 SMART link doesn't work.

  • @malegasaikiran8192
    @malegasaikiran8192 2 ปีที่แล้ว

    Can you Prepare it for money how much cost you need

  • @Lucas-nh2mk
    @Lucas-nh2mk ปีที่แล้ว +1

    Its 2000 watts?

  • @DALILOMODIY
    @DALILOMODIY 3 ปีที่แล้ว +2

    so cool!

  • @theo2378
    @theo2378 ปีที่แล้ว

    @13:16 61A current draw, that's huge 😱

  • @tulioideias2992
    @tulioideias2992 3 ปีที่แล้ว

    my partner help me tou round skete with a vesc 4.20 mini and 6384 motor with 10s 8p battery and the vesc is getting very hot could you help me??

    • @sicat2345
      @sicat2345 3 ปีที่แล้ว +1

      install big heat sink on the mosfets. Heating is a common issue of all flipsky's "mini" and "plus" esc. Your skate is must be inteded for heavy loads judging from how big you battery and motor, with that you should have used fsesc 6.6 instead of that puny 4.20 mini.

    • @albertnario4877
      @albertnario4877  3 ปีที่แล้ว +1

      vesc mini's MOSFET are positioned in one side, you can put bigger heatsink on it.

    • @tulioideias2992
      @tulioideias2992 3 ปีที่แล้ว

      @@sicat2345 thank you so much

    • @tulioideias2992
      @tulioideias2992 3 ปีที่แล้ว

      @@albertnario4877 thank you so much

    • @tulioideias2992
      @tulioideias2992 3 ปีที่แล้ว

      @@sicat2345 at the moment I have no money to buy 6.6

  • @2strokesandstuff580
    @2strokesandstuff580 3 ปีที่แล้ว +3

    I want to build a electric assistance bike" with a car alternator" I'll peddle the alternator with legs...and iturn power an electric motor! Think it is feasible? Great video man!

    • @Todd_G_FPV
      @Todd_G_FPV 3 ปีที่แล้ว +1

      U can use a brushed motor instead of an alternator to do the same function without the wiring hassle but not sure on how well it'll work

    • @2strokesandstuff580
      @2strokesandstuff580 3 ปีที่แล้ว

      @@Todd_G_FPV cause of the amps right? Car alternators are capable of generating 40to200 amps ... those motors are a bit different aren't they.. kind of a freqency thing...id like to use a washer motor or something like... is there a way to use capacitors for the push? Thanks for your response! 😃

    • @Todd_G_FPV
      @Todd_G_FPV 3 ปีที่แล้ว +1

      @@2strokesandstuff580 I didn't think about the higher amps of the alternator but far as capacitors i have no idea lol

    • @andrewchristiansen8311
      @andrewchristiansen8311 3 หลายเดือนก่อน

      No. Millions has been wasted on the "Digital Drivetrain" for 3 decades. First one made in 1995. It's efficiency now is at 50-60% while a chain gives 95% efficiency. They think by 2030 they can get the efficiency up to 70%. But that still means 30% of the energy you provide is wasted in conversion. You can buy a bike like this from 2012.

  • @canarispottt
    @canarispottt 3 ปีที่แล้ว

    amd regen brake ? wires?

  • @roderickdeguzman9306
    @roderickdeguzman9306 ปีที่แล้ว

    Kamusta n? Tanong ko lang sana Kung pwd gamitin ang flipsky controller sa bafang hub motor

  • @silbernersurfer8264
    @silbernersurfer8264 3 ปีที่แล้ว

    08:24 What is it for?

    • @albertnario4877
      @albertnario4877  3 ปีที่แล้ว

      torque arm, it prevents motor axel to spin in your drop out.

  • @kerwon1988
    @kerwon1988 3 ปีที่แล้ว

    Nice job men!👌🏽

  • @lsoncz0219
    @lsoncz0219 2 ปีที่แล้ว

    Great job 👍👌

  • @sanjeev7821
    @sanjeev7821 3 ปีที่แล้ว

    Nice very build up. Great.

  • @ElmarBon
    @ElmarBon 3 ปีที่แล้ว

    How is that battery 57.6ah? That would be nearly 3 kWh!

    • @albertnario4877
      @albertnario4877  3 ปีที่แล้ว +1

      soon I make another video about this bike

  • @alexeynastenko5189
    @alexeynastenko5189 2 ปีที่แล้ว

    Good day dear friend! Please tell me the size of the rear wheel motor 1500w and if possible the size of the self-motor I have a motor from a fatbike 1000w of the forward stroke I want to choose a rim for knitting. Thank you very much in advance! Sincerely, Alexey Nastenko Atyrau Kazakhstan.

  • @k0k0w
    @k0k0w 3 ปีที่แล้ว +1

    Good din ba for scooters yang Flipsky VESC?

    • @albertnario4877
      @albertnario4877  3 ปีที่แล้ว

      yes, may restore akong scooter gamitan ko ng vesc

    • @k0k0w
      @k0k0w 3 ปีที่แล้ว

      @@albertnario4877 Video naman minsan boss sa Vesc for e scooter use. Nagbabalak akong mag upgrade kung sakali. May paraan kaya magamit yung trigger throttle nito for Vesc?

    • @albertnario4877
      @albertnario4877  3 ปีที่แล้ว +1

      @@k0k0w palit throttle kana tpos cellphone mo nlng ang display mo for speed and other monitoring ng scooter mo..

  • @xarxnart8282
    @xarxnart8282 3 ปีที่แล้ว

    Cycle is be like - " mujhe kharida kyu ; khud hi bana lete "😅

  • @moon_Varcan
    @moon_Varcan 3 ปีที่แล้ว

    When the steel he is using is tousent times better quality than the one ised in modern cars...

  • @peterwolf8953
    @peterwolf8953 3 ปีที่แล้ว

    you could help me make one and if so how much would it cost me?

    • @albertnario4877
      @albertnario4877  3 ปีที่แล้ว +1

      Start at 250usd you can make your own ebike

    • @peterwolf8953
      @peterwolf8953 3 ปีที่แล้ว

      @@albertnario4877 If you like, we can contact through Facebook. If I want to have something like this to transport my work.

  • @John_Smile
    @John_Smile 3 ปีที่แล้ว

    Another bike ?
    Why did you mount such a large engine ?
    I would be satisfied with a 500 W engine.
    It's a bicycle, though !

  • @sunrisesunsetoftheworld1607
    @sunrisesunsetoftheworld1607 3 ปีที่แล้ว

    Great work. 👍

  • @dreamingdust7667
    @dreamingdust7667 2 ปีที่แล้ว

    What a great ebike.

  • @castortoutnu
    @castortoutnu 3 ปีที่แล้ว

    Are you sure 57.6 Ah is enough? I mean you can only run a 250w motor for 11h straight with that. That barely gets you to the grocery store and back if you go easy on the throttle.

    • @albertnario4877
      @albertnario4877  3 ปีที่แล้ว

      yes, I need it on my 70km to 90km travel everytime I need parts on my projects.

    • @marthamryglod291
      @marthamryglod291 2 ปีที่แล้ว

      I was just thinking about that. He might need to get a trailer and bring along another 100 ah battery just in case going for 150 straight miles isn't enough.

  • @RahulSingh-ie6po
    @RahulSingh-ie6po 2 ปีที่แล้ว

    Can you make for me one e cyle ? How much price this e cycle

  • @ramkiramki715
    @ramkiramki715 3 ปีที่แล้ว

    I want to alternate my bicycle how much cost

  • @NKBobcat
    @NKBobcat 3 ปีที่แล้ว

    You are a genius.

  • @shadoworkz
    @shadoworkz 3 ปีที่แล้ว

    -40a regen braking kahit 15a lang nakaset? Tama po ba yun?

  • @chrisgenovese8188
    @chrisgenovese8188 3 ปีที่แล้ว

    Dude, so sick.

  • @janeas2008
    @janeas2008 3 ปีที่แล้ว

    I can reach above 60km/h with a cheap Chinese controller. tell me please what is the reason to buy this expensive controller...
    Thank you!

    • @albertnario4877
      @albertnario4877  3 ปีที่แล้ว +1

      you got
      programmable controller any time via bluetooth
      wire less monitoring off:
      speedometer
      phase current
      battery current
      voltage
      odometer
      motor temperature
      and more

  • @paulbonin.
    @paulbonin. 3 ปีที่แล้ว

    astig chief. parang mas okay magpagawa na lang sau. more power.
    paulboninvargas
    zebianmnl

  • @pmhenrymateo
    @pmhenrymateo 3 ปีที่แล้ว

    HOW MUCH COST IF YOU MAKE MY BIKE JUST LIKE THAT? ARE YOU FROM PHILIPPINES?

  • @vanivanov
    @vanivanov 2 ปีที่แล้ว

    Absolutely admire your idea and on same hand hate execution of your project.
    Definitely you have knowledge but fabrication quality is very poor.
    I hope to see more projects from you, just please pay more attention to details because definitely you got potential to do it way way better.

  • @marlonaguiar7769
    @marlonaguiar7769 3 ปีที่แล้ว

    amazing your work on this project, it was amazing, here in my country only the cost of the battery is the value of a 160cc combustion motorcycle, I have a suite in the united states through a carrier, would it be possible to contact you, would you like to see how much go out to buy there, and send them to the suite to come to Brazil, I thank you for your attention

    • @albertnario4877
      @albertnario4877  3 ปีที่แล้ว

      I'm always looking for local supplier, they sell cheaper because of bulk import. and my country are much near on china. than yours

  • @taureansdiy2132
    @taureansdiy2132 3 ปีที่แล้ว +3

    Huwag mong pansinin mga bashers. Mga ingit lang mga yun. 😅🤣

  • @One_seven_seven
    @One_seven_seven 3 ปีที่แล้ว

    Can you please make a complete DIY bike

  • @jathin27
    @jathin27 3 ปีที่แล้ว +1

    First comment brother 😁

  • @ridgerider7402
    @ridgerider7402 3 ปีที่แล้ว

    Love it 👍

  • @everywherelocal
    @everywherelocal 3 ปีที่แล้ว

    great clip 🤘

  • @megametal9034
    @megametal9034 3 ปีที่แล้ว

    Brasil assistindo seu vídeo Meus parabéns amigo vídeo muito top muito top Beautiful Beautiful wonderful

  • @francescomarchi694
    @francescomarchi694 3 ปีที่แล้ว

    Max speed?

  • @adiefishing
    @adiefishing 3 ปีที่แล้ว +1

    grabe idol umabit ng 63 ang speed

  • @nazimali6128
    @nazimali6128 3 หลายเดือนก่อน

    Is this is street legal

    • @RBB_RH
      @RBB_RH 3 หลายเดือนก่อน

      hell no

  • @alfaworldtv6599
    @alfaworldtv6599 3 ปีที่แล้ว

    Nice job!

  • @terrytwotoes3225
    @terrytwotoes3225 3 ปีที่แล้ว

    You replaced the whole bike so what was the point

  • @RelictaPlay
    @RelictaPlay 3 ปีที่แล้ว

    it was much easier to buy a bike with two shock absorbers initially

  • @marckusdc
    @marckusdc 3 ปีที่แล้ว +1

    Ang husay!

  • @johnscrews4837
    @johnscrews4837 3 ปีที่แล้ว

    bravo love it

  • @guecoliamg3382
    @guecoliamg3382 3 ปีที่แล้ว

    Sir san mo nabili yang maxxis na tire