Simple, neat and effective - The Slip D Wafter Rig! We hope this video will help you guys fish either our Cork Dust Wafters, Pastel Barrel Wafters or Balanced Wafters easily and catch a few more carp! Good luck this autumn everyone!
@@masonrees1903 yes it can, you will probably need a larger piece of putty or a split shot to counter balance the pop-up but otherwise the set-up is the same.
Thanks John, your rig videos are some of the best and easiest to follow. As a new angler I've learned a lot from them. Keep 'em coming. Might be too simple for the main audience, but I'd love an overview video for different bait types, base mixes etc. I've found it a bit overwhelming to know which to try and why.
Another rig to add to armoury, good vid dude as always, when is the subscriber guest fishing trips coming lol would sure be a dream for average Joe to join you guys on a trip, although would take some planning, much love keep up good content.
Blimey, nice video and its funny to think i was using that same hook link 30 odd years ago, odviously different coated braid but it was the same rig none the less. 👍
What are you using to construct the rig? A braided hook link is what’s needed with the coating stripped back making the material very thin but still super strong … 👍🏼
What I don’t agree with the wafters is the hook size they’re set up to balance with. 12mm= size 8, 15mm=size 6, 18mm= size 4. Should be 10, 8, 6 imo. Don’t need massive hooks
Serait t'il possible de faire de temps en temps des vidéos en français svp, je pense que la communauté francophone qui vous suivent ou achètent vos produits serai fortement intéressé, au moins sous titré vos vidéos !
Slip D? It's in the name, sport to pick holes but this is a D rig. Where is the slip? You whipped the wrong end to the hook. You whip the tag end, the shrink tube will hold everything in place so it does not in ravel, you can then adjust the loop size to as you need, plus when hooking a fish the knot slips. It's no the name. LMAO.
Such a good rig been using it for 2 years a simple rig as well I could tie it when I was ten the second type of rig I tied after a hair rig and it has done my pb the second biggest fish in the lake the armidillo fully at 29 pounds and my first twenty on a link cork dust wafter with some fish smart liquid on it also has served me many upper doubles 👍👍
Just add a micro shot? Putty and all that over fuss, I think carp anglers are using this stuff and forgetting the basics, if you wana get over the top then just learn to make a fishing fly..... 😂
Really nice rig!! imho you can go further : I would recommend very similar multi rig: looking and working almost indentical but you can change hook in a second. Instead of tying knotless knot just make loop using 8loop knot, pull loop throught hook eye, attach microring swivel and over hook, rest same ( kicker, putty, antitangle slevee).
Oh you responded! to be precise i would name rig I described: slip-D multi. Question: I can tie 2 versions of it: with „D” section with coat or without coat (Like in your Video). What would be the difference if any?
@@antoniosgwozdz2945 Its a lot about personal preference really - so for a pop-up I'd prefer the coating on to create more of a D rig, but with a Wafter I'd take the coating away for a softer presentation of the hookbait so it can easily be taken when the hook is laying flat and so the hookbait can slid.
Hi Alex, its really best with a coated braid - although you could tie the hook/slip D section with a soft braid and then tie to fluorocarbon using an Albright Knot. So a slip D combi rig.
You also can use some fluorocarbon to attach a wafter mostly I make 5 same rigs with a wafter already on switching is easy and quick and you can attach a new wafter when you wait for a fish
It would be the first with the hook laying flat on the lakebed, although there are times when you can want that bit more bouyancy and the hook up on the point, like if fish are not mouthing the hookbait and feed aggressively or if lakebed debris is a concern.
Confidence is everything and if that lies with a different rig I'd keep to that. Perhaps then tie a couple of these and test on a 'easy' water to gain some confidence and have another presentation in the locker for when you may need it.
@@jordanlayfield8975 Yes, although it will sink a little quicker - if you wanted more buoyancy you could add a Topper as seen in the video or use a 18mm Balanced Wafter and trim it slightly so the rig sinks nice and slow and only just balances on the lakebed.
Simple, neat and effective - The Slip D Wafter Rig! We hope this video will help you guys fish either our Cork Dust Wafters, Pastel Barrel Wafters or Balanced Wafters easily and catch a few more carp! Good luck this autumn everyone!
www.mainline-baits.com/carp-product/match-luncheon-meat-137/ a big chunk of the one of these on the hair; Activ-8 or Halibut.
Can this rig be used with a pop up
@@masonrees1903 yes it can, you will probably need a larger piece of putty or a split shot to counter balance the pop-up but otherwise the set-up is the same.
@@MainlineBaitsCarpFishingTV okay thank you
@@masonrees1903 No worries!
Best video on TH-cam thank you
Thanks John, your rig videos are some of the best and easiest to follow. As a new angler I've learned a lot from them. Keep 'em coming. Might be too simple for the main audience, but I'd love an overview video for different bait types, base mixes etc. I've found it a bit overwhelming to know which to try and why.
Awesome, thank you! Yep we can do that!
Such a really good series of demos John, always watch! 👌👍
Thanks Paul - glad you're enjoying these!
Very easy to tie after watching the video. Thanks. Loving the videos. Keep them coming
Awesome! Thank you!
Best way I’ve seen to do this rig beats all the long loops etc almost as quick as a no knot rig
Glad you liked the video John!
Bang on again folks 👍👍
Thanks Luke - glad you liked it!
I normally use a spinner rig but after watching this im gonna tie some up and give it a go . Thanks mainline 👍🏻👍🏻
No problem 👍
Thank John , I follow your videos .
Glad you like them!
Brilliant video once again. Cant wait to try this rig out!!!!!
Thanks 👍
This is the one ☝🏼
Great video John.
Thanks 👍
Loved this video deffo going to be making this rig for the upcoming weekend
Good luck Jay!
Another good one mate 👍
Thanks Bob!
Огонь.... Спасибо за труды.....
No problem - glad you enjoyed this!
Top Videos well done 👌👌
Thanks Christian 👍
Perfekt rig.
Glad you like it!
Another rig to add to armoury, good vid dude as always, when is the subscriber guest fishing trips coming lol would sure be a dream for average Joe to join you guys on a trip, although would take some planning, much love keep up good content.
Thanks Danny - glad you found this helpful! A Subscriber guest session trip is something we'd like to do at some point for sure!
Great vidos
Thanks Mark!
Hi john great vid but can you use it without the kicker
Do tangles happen regular when casto out just like this?🤔
Quality
Thanks!
Blimey, nice video and its funny to think i was using that same hook link 30 odd years ago, odviously different coated braid but it was the same rig none the less. 👍
It's a great rig, it's my go to rig these days.
Really struggled with getting the line through the eye three times
What are you using to construct the rig? A braided hook link is what’s needed with the coating stripped back making the material very thin but still super strong … 👍🏼
Is this just as effective with a bottom bait ?
Hi guys, am I OK to hook on a small pva mesh bag when using this rig? Without it effecting the rig effectiveness. Thank you.
Hi Dean, yes you can.
Great! When we see some carps?
Soon!
Could listen to john for hours. Calm and clear with every instruction and super relaxing while I practice these rigs.
Wow, thanks!
If the leg bone is connected to the kneebone, what’s the kneebone connected to please?
Your thigh bone of course!
😂😂. Of course! Thanks for the reply, I couldn’t resist.
Would a wide gape hook work here or is curved hook better ?
You could use a wide gape.
Can I use normal boiliees with this as bottom bait.
Yes you could.
Can you just use a simple hair rig with this Wafter or isn’t it effective
Yes you can, just check the balance of the rig in the edge before casting out, just to make sure your hook has enough weight.
Do you always use barbless hooks?
Nearly always use a micro barb hook Chris.
its not actually a slip D is it if the D is fixed with a knot.
Hi, yes as the D can slip down the hook unlike a fixed mono type D arrangement. Without the knot you have the Multi-Rig. Hope that helps fella!
What I don’t agree with the wafters is the hook size they’re set up to balance with. 12mm= size 8, 15mm=size 6, 18mm= size 4. Should be 10, 8, 6 imo. Don’t need massive hooks
😄
7
Serait t'il possible de faire de temps en temps des vidéos en français svp, je pense que la communauté francophone qui vous suivent ou achètent vos produits serai fortement intéressé, au moins sous titré vos vidéos !
Slip D? It's in the name, sport to pick holes but this is a D rig. Where is the slip? You whipped the wrong end to the hook. You whip the tag end, the shrink tube will hold everything in place so it does not in ravel, you can then adjust the loop size to as you need, plus when hooking a fish the knot slips. It's no the name. LMAO.
Agree - this is not my understanding of a slip D as its fixed with a knotless knot . . .a slip D is as per Mark Bryants Ultimate Rig
@@chrisbelcher2561martin Clarke invented this rig an its pretty similar to be fare .
Great video John
Thanks!
I’m going for my first catfish next week have you got any tips
@@chastoplayz9626 pellets and meat would be a good starting point, oh and when you hook one hang on!
Thanks so much
@@chastoplayz9626 No problem!
I've used this rig for many years and it's done me some very good fish!👌🏻
Good to hear!
Such a good rig been using it for 2 years a simple rig as well I could tie it when I was ten the second type of rig I tied after a hair rig and it has done my pb the second biggest fish in the lake the armidillo fully at 29 pounds and my first twenty on a link cork dust wafter with some fish smart liquid on it also has served me many upper doubles 👍👍
Thats a big fully Jacob - well done buddy!
Definitely gonna be trying this one, rigs have always been daunting to me but this series is soo good and makes it look easier than they look. Thanks
No worries Adam - glad they are helping!
Just add a micro shot? Putty and all that over fuss, I think carp anglers are using this stuff and forgetting the basics, if you wana get over the top then just learn to make a fishing fly..... 😂
Seen many demos how to tie slip D,s most use kurc shank,s of some sort without anything behind the hook ie no kicker so is it nessacarry ?
Really nice rig!!
imho you can go further : I would recommend very similar multi rig: looking and working almost indentical but you can change hook in a second.
Instead of tying knotless knot just make loop using 8loop knot, pull loop throught hook eye, attach microring swivel and over hook, rest same ( kicker, putty, antitangle slevee).
Yep the Multi Rig is another good presentation!
Oh you responded! to be precise i would name rig I described: slip-D multi.
Question:
I can tie 2 versions of it: with „D” section with coat or without coat (Like in your Video).
What would be the difference if any?
@@antoniosgwozdz2945 Its a lot about personal preference really - so for a pop-up I'd prefer the coating on to create more of a D rig, but with a Wafter I'd take the coating away for a softer presentation of the hookbait so it can easily be taken when the hook is laying flat and so the hookbait can slid.
Mainline Baits Carp Fishing TV
THANK YOU ! ;)
Thats the way I tie it mate.
Really good rig I've used it a few times before and had fish on it.. Cheers team
Great to hear!
I can make this rog with florocarbon?
Hi Alex, its really best with a coated braid - although you could tie the hook/slip D section with a soft braid and then tie to fluorocarbon using an Albright Knot. So a slip D combi rig.
@@MainlineBaitsCarpFishingTV thx
You also can use some fluorocarbon to attach a wafter mostly I make 5 same rigs with a wafter already on switching is easy and quick and you can attach a new wafter when you wait for a fish
Yep, always good to have a few rigs tied and ready!
What is you favourite presentation from that two in video. Did you notice any difference in numbers of takes ? Regards
It would be the first with the hook laying flat on the lakebed, although there are times when you can want that bit more bouyancy and the hook up on the point, like if fish are not mouthing the hookbait and feed aggressively or if lakebed debris is a concern.
Always professional YOU ARE THE BEST !!
Thanks!
Good rig caught a few on it the only thing I don't do is put a shrink tube or kicker over the eye of the hook
Good to hear Stephen!
Brilliant👌👍
Saturday's lesson learnt and essential IB wafters ready to go.🥂🎣
Excellent!
I like the idea of the slip d but Iv never had real confidence on the presentation
Confidence is everything and if that lies with a different rig I'd keep to that. Perhaps then tie a couple of these and test on a 'easy' water to gain some confidence and have another presentation in the locker for when you may need it.
Great vid ,Great rig ,Great detail ,loved the closeups and easy to do Cheers mate.
No problem Alan 👍
Good series of demos guys
Thanks guys!
Can you use kickers instead of shrink tube thanks
Yes you could.
I was wondering where my black clipper when you stole it 😰🤣 perfect rig tho
Could this be adapted to a non coated hooklink and fished liked a cocked Ronnie rig from a solid pva bag ?
Yes, but I'd probably only use it in a solid bag where there's no risk of tangles.
@@MainlineBaitsCarpFishingTV Thankyou
Great film thanks! Just to be clear, is the coating removed up as far as the putty?
There is around an inch removed from the hook and then the putty is around another inch further back. Glad you enjoyed this!
👍
Very good how to demonstration
Thanks - glad you liked it!
Great video as always John 👍🏻
Thanks Steve 👍
Is this good for pva bags
Inside solid PVA bags it can be yes.
I can confirm this works, 1.5hr caught a 18lb.5 thank you. Also didn't use putty just used a tiny lead shot
Great video as always how much of the stripped off material off the eye of the hook or is it all coated thank you
Thanks Anthony - the D is uncoated and about an inch from the hook eye.
Thank you for the reply
@@anthonyrushton3495 No worries!
Can this rig be used with a bottom bait?
Yes it can.
@@MainlineBaitsCarpFishingTV thank you so much for the response guys!
What is the purpose of the putty ?
It helps the hook turn when picked up by the fish.
@@MainlineBaitsCarpFishingTV ah I see, got my first big carp day tomorrow! Very excited. Thanks for the reply.
Perfekt!
Absolutely!
What size hook is this?
Hi Jordan, the hook is a size 6.
Could a size 4 be used for this?
@@jordanlayfield8975 Yes, although it will sink a little quicker - if you wanted more buoyancy you could add a Topper as seen in the video or use a 18mm Balanced Wafter and trim it slightly so the rig sinks nice and slow and only just balances on the lakebed.
Thank you 👍🏽