Honda CRF450R Shock Pivot Bearing Replacement | Honda CRF450-R Rebuild Part 10 | Partzilla.com
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- CRF450 shock bearing kit: www.partzilla....
See a shock bearing replacement on a CRF450R in this video from Partzilla.com. This is part of a larger rebuild project where rebuilding this dirt bike from the ground up. See more of the rebuild here: • Honda CRF 450R Repairs
We’ve replaced the linkage bearings and the swingarm bearings, so now we’ll turn our attention to the shock. John will show you how to replace the shock bearings on a dirt bike, and in this case, a 2005 Honda CRF450R.
This is a fairly straightforward job, and you can see how to remove the shock in the playlist above. Here, we’ll start with the shock removed and we’ll remove the seals and press the old bearings out. There is a stopper ring you’ll need to remove to allow you to pull the bearing through.
This Motion Pro shock bearing puller is a real help with this job: www.partzilla....
See the rear shock diagram here: www.partzilla....
Read how to do this job step by step: www.partzilla....
Watch us remove the engine on our Honda CFR450 here: • Honda CRF450 Engine Re...
See the CRF450 engine teardown here: • Honda CRF450 Engine Te...
VIDEO HIGHLIGHTS:
Removing the seals and bearings - 1:40
Using the Motion Pro shock bearing removal tool - 2:40
Installing new bearings - 6:08
Shop for OEM Honda motorcycle parts here: www.partzilla....
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2005 Honda CRF450R, but you may have similar steps for your Honda dirt bike. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.
Спасибо за видео, очень полезно.
Watch me cave man it old guy😂
This is it?
This is the basic of the most basic you could show us.
Doesn't justify a video on it's own.
When are you shipping to Europe again?
I have a 2003 raptor and it won’t start when I got the start button it just whines is it the starter or the batterie
Why pull with a force? Jusr apply a little heat using a heat gun an it will be much easier to change it.
There’s a reason the shock comes with a warning on it to not apply heat.