SO Many HARLEYS Too MUCH Motorcycle DRAMA Update / Ironhead Shovelhead Evo Softail Sportster Chopper
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- Just an update on what's happening in the garage. It's seems having so many Harleys can add up to too much drama of maintenance and repairs for an ironhead, shovelhead, evos, sportsters, softail, and choppers.
Patreon: / saddletramptv
Instagram: / saddletrmp
Facebook: www.facebook.c...
That Shovel is guilty of Contributing to the Deliquency of a Sportster
Lol 😂
That’s funny 😆
Try asking pacific Mike about the shovel. Mike has always responded to me and the man really knows his bikes. His daily rider "road bike" is a 79 flh.
With those solid lifters you will want to add STP oil additive only because it has a Very high zinc content, I use it for breaking in engines but with the solids you NEED a higher zinc engine oil, try that I bet it shuts it up some, my 91 evo I changed the entire top end with all S&S components but the pushrods I got, not really too happy with, they're revtecs, they're ok, but once they're adjusted I have the same problem with movement
Thanks for the info!
I know it's been a while now but I'm so glad to see you got that garage up I love how you never give up on a bike you always figure it out very inspiring have a great day brother
If you've never heard the Bob Dylan song 'Everything's broken' you owe yourself a listen.... LOL Good luck getting them all back to service!
Hi Corey, looks like you have more then enough to keep you wrenching... We just serviced the bike and getting ready to head north for Sturgis!
Nice! Have fun
Yes Corey, I too, feel your pain, the whole family sucks but we can’t help but to enable them by keep ‘em on the road. Love hurts 🏍️
Back in the day, I was having carb issues and all I did to fix was; check the float valve adjustment with the bowl off. Just slowly lift the float, and see what level the float is at when the float valve starts to lift off the seat hole. You know! (Float adjustment tab too low - it'll starve the engine!
Too high - it'll flood it.)
Hope that helps!
I nowadays own a fuel injected TC-88 on an 05 Road King Custom and a fuel injected 1200,
08 Sportster Nightster!
But those F.I. bikes fuel delivery cannot be adjusted without a Dyno
or unless I buy an electronic fuel management system, for them. But they run great, so I just leave them alone in my senior age and just ride!
Happened to me also! Same scenario!
I'll have to do that
Good to see you man. Nicole says say hell to the missus.
And same to her!’
Just another day in the life of a Harley owner, and we love every bit of it.
I'm telling ya man get a HRS40 for your sporty and a 42 for your big twins that need carbs. Buy a aem air/fuel meter weld a O2 bung in the front pipe 18" from the engine. and rear your air fuel by the gauge. Stsrt with wide open throttle (main jet) then cruise (needle highth) Lastly off idel and low speed (mixture screw and pilot jet) You want your idle screw to be turned out about 2 to 2.5 turns If it is under 2 go one jet smaller over 3 go one piolet jet larger. Do the rest by air fuel reading. I've probably tuned 35 or more bikes this way over the last 20 years with no complaints as well as my onw street and race bikes with great results
Man, that old Ironhead is how I found your channel!
Very cool!
This might sound weird. But check your timing on the ironhead. That happened to me years ago. It took me almost a month to figure it out (long before internet..lol)
Cory thank you for sharing what’s going on in your neck of the woods. Man I miss having to wrench on my 73 Sportster. You are so blessed man
I have got to the point that i just replace the intake seals every couple of years just to get in front of it
I run solid lifters in my shovelhead, be way to help with noise. Is keep the fuel tank full. It's echos the noise when there isn't much gas in the tank, the nature of the beast they will tick
I feel your pain because I know the struggle. On your Shovelhead lifters check to make sure the lifter blocks were not plugged. Some guys will put a set screw in the oil galley to block flow off when running solid lifters. On the Ironhead, maybe try putting a little more advance on the timing or check to make sure your advance weights are working properly.
Thanks, Will. I'll take a look.
Don't advance the timing.
I broke 3 Bendix gears by taking that advice, back in the day.
I've been running solid lifters in my 91ci Shovelhead for 43 years....you do know hydraulic lifters require a different cam than the solids....check with Andrews/ check a parts catalog example Andrews B grind(485. lift) solid lifters BH = hydraulic lifters....I have an original cam from Tom Sifton 485 lift it's for solid lifters....the B grind is a good choice for street use...
Thanks for the update Cory, best of luck on getting all of them back to the way that you want them.
You bet
Corey, thanks for the update. I hope by the fact that you're surrounded by "slmost running" motorcycles that your happy and having a good time. I hope that is the case. You be good to yourself (I like that closing line.) and we'll see you either out on the road or on the next video. Thanks for Sharing!
Its like having a lot of kids the more you have the more problems you will have LOLOL. Great to see you buddy. It all will keep you busy for a while. Stay safe friend.
Tell me about it
Crack on. Rotherhithe it happens to all of us sometimes you will work through it and enjoy the road afterwards all the best from the UK fellow iron head lover
Man you got a lot going on hang in there you'll get them all sorted out
I was going through that a couple of months ago too damn many bikes sold them all kept my Springer and I'm done
Check your plugs man cutting out first thing to go to. I know crazy but start a simple first or you cause yourself a lot of work. But you know that right
Keep on trucking, you'll get there😊
Corey, after rewatching this video, I wonder if you may have some water in your gas with the Iron Head and The Tramp suddenly having the same type problems when they were running well before. I wonder if your most used gas station has underground fuel tanks, which can leak water into the tanks. When I was a kid, we had a local store that had to go to above ground tanks because their tanks had accumulated so much water over the years that people quit buying gas from them. My neighbor was burning leaves and filled his gas can gas cap full of gas and when we threw the "gas" on his smoldering fire, it literally put the fire out! Lot of hammer-yammering to say maybe buy a gas can full of gas somewhere different with above ground ethanol free tanks and drain the tanks on one of them, maybe the Tramp, since you think you might have intake seal problems and see if the "good" gas will solve your troubles. Also, try a gas cap from one of your scoots that runs smooth on the Tramp and see if it is a venting issue. One more thing to check is the petcock. I almost pulled my hair out with that awful vacuum petcock. Sometimes it worked great, sometimes it choked my motor to death. I would think the Softail has a too-high float level or a bad needle and seat. You probably have thought of some or all of these things, so don't take this un-asked for advice the wrong way.......This is the only good advice that I can give you, from personal experience. My advice is pick the easiest one and work on that one and don't touch another bike until you are happy as a clam with THAT bike. That will get your spirits boosted up and you will feel a sense of accomplishment. Then pick the NEXT easiest problem and don't work on anything else until you feel all warm and fuzzy... Before you know it, you will just be down to maintenance instead of repair... And maintaining that whole shop-full of goodness will ALWAYS keep you busy... in a good, non hair-pulling -out way. And don't forget to ask Him for guidance and a calm spirit while you're working on your stable of scooters. Take care, Tramp and The Missus! :)
I'll have to consider trying a different gas station then. Thanks Tommy
Too many irons in the fire, go ride😎
gas cap not breathing . just a few thoughts, A defective carburetor, coil getting hot , bad battery, loosen the retaining nut and turn the rod until it bottoms out the spring on the hydraulic piston. Then mark your flats and turn it out 3.5 times, or whatever the spec is. Its is a zeroing point. don't get mad at me if you hve already check these , just tryin to help out. Rock on brother man.
www.vtwinmfg.com/Instructions/16/16-0993.pdf
Thanks for the video Tramp. Miss seeing you brother.😎
Sure thing!
You know you jinx yourself with the bagger. Never say something doesn't have an issue. Know you'll get all the other sorted out in due time.
On the Shvel, some cams are made for solids only,
i know what your going through Corey as you know i have a few bikes myself that i'm dealing with. good luck with them 👍
Try loosening your gas cap on the sportster when it feels like its losing power. If the bike starts to pick up power, replace the gas cap. That is a common problem on old bikes. The gas caps vents get clogged and reduce power.
👍🇺🇲👍🇺🇲👍🇺🇲
I have trouble enough working on one bike let alone that many. But I get it. Good Luck Tramp...
Keep on Keeping on. Thanks for sharing.
You bet
If you adjust sold lifters properly you won't need to re-adjust. I have them in my 79 and have not had to adjust in years!
Man I just subscribed and was stoked to see all the content you have. I've got a shelf full of super e and super b carbs, manifolds and clamps if you need anything hit me up I'll just send you one. I mostly only do the older stuff, shovel, pan and ironhead stuff. Anyway thanks for the comment the other day on my channel
Hey, man. Thanks for the visit. I could use an S&S super e backing plate for an ironhead application. Thinking of pulling the one off of one bike to put on the 76 sportster.
I believe I have one, I'll look after work. I know I have a few for shovelheads. If I've got one I'll send it to the address on your page. Love the content man
On your shovel check the bottom of the lifter blocks where the oil hole is. Sometimes guys would tap that oil hole and throw a plug in there if they were running solids.
I'll take a look... Thanks
More bikes, mean more projects, I’m guilty of that. 😂
Me too
The Max Headroom edits are interesting.
Thanks for posting.
For the Sportster…b4 you mentioned intake leak, that’s what I was thinking. Spray WD-40 from opposite side of carb and watch where it goes. Had the same issue on my shovel. Ole bikes like attention. They feel neglected if your not wrenching on them. 😅
They can at times
The gas "starvation" problem, make sure the petcock isn't clogged. Have had that happen.
My cousin just had to replace his petcock because it was clogged. At road speeds acting up
Good luck...you figure out the iron.
Love my 82 Fxe Shovelhead
I thought I heard something to the effect that if your bike rides better with the air filter off, you're rich on the carburetor being that more air can come in to compensate for the heavier flow of fuel.
I feel every bit of your frustration with the Softail. Gotta put mine in the shop soon. Pilot jet is partially clogged, I believe. I will trust White Beard to figure it out though.
I'll get it... Onward through the fog
Look at the bright side. You don't have to deal with EFI. I've had almost 50 carbureted bikes in my life, and they all run/ran fine. I have a 1989 FXRS Low Rider and a 2002 Sportster 1200, both run great. On the rare occasion when I did have a carburetor issue, it was always very easy to track down and fix. My nearly new EFI Honda has been at the dealer now for six weeks, they have yet to figure out why it won't run. If/when they fix it, I'm probably going to sell it. I can see it being a very expensive nightmare when the warranty runs out.
Good luck buddy
Check your ignition system. Bad plugs or bad coil can run ok until they are under a load. Then they fail.
the FLSTN will be float & or needle & seat...... .& know ya pain my car has causeing me a lot a grief ... cheers mate
I'll have to check it out
Good luck with them all. Still love seeing the 76 iron head my first Harley, mine was blue also. It was only 9 years old when I had it I loved it but I worked on it constantly 😂 best of luck enjoy them 👍
That's part of loving them
i would get new flanges and gaskets for the cv carbs,make sure the gaskets or seals are for that model.the shovel might need rocker arms shimed also make sure the push rods are straight.
My old Honda Bros 650 (Hawk in the US) does a similar thing. It pulls fine until about 5-6K rpm when it starts to stumble. It can keep accelerating but can't seem to rev much past that point. My mechanic reckons I need to put a stock airbox/filter on it. I know the carbs could do with a once over but hey, if it aint broke and all that. Kinda is though
The points on mine cause that. 1 thousandths off one way and no low end 1 thousandths off the other way and no high end. Ended up having to change the mechanical weights. The springs didn't have the right tension anymore. Good luck!
That's on my iron head. Lol
I'll have to look at that next
Question?....Are you running hydraulic lifters on a solid lift cam? A solid lift cam has what they call a quieting ramp. Hydraulic cams don't need it and that might be why it ticks..maybe worth a check with your friend at his shop.
That sounds to me like what's going on with the Shovelhead...you likely know Andrews has their cams lettered to designate the difference between the two...Andrews B and the Andrews BH for hydraulic lifters....
Running an H grind cam with the stock specs
Great update 👍👍
Try new spark plugs but make sure they are properly gapped to specs good luck Tramp
Hey Man, how are Ya? Love the "New Shop" Old Bikes always seem to have their Quricks but I sure do like how they sound. I just got back from VAMM I am working on the series of videos Talking to others that have met you love this community. You say you are not a pro I say you are. Great video
Thanks Kevin. I try.
A question my guitar buddies and I discuss is...would you rather have five $500 guitars or one $2500 guitar? So I'll ask you the same question. Would you rather have the shop full of highly suspect bikes or one awesome bike that is ready to go anywhere anytime? There is no wrong answer. Just food for thought.
One good one with several projects
CV's definitely not an equal. I've started digging in my one, uncap the IMS plug and.... there was 1\2 turn. And it worked just because someone set a crazy idle amount so it was idling on a few transfer ports. XXX Lego)
Love your videos not a doubt you will figure it all out.
Actually I was thinkin I’d buy me an old evo tourin bike to go with my 87 heritage but guess I need something reliable
Evo's are plenty reliable
Different brands of push rods have threads and require different amount of turns !
These were done right and they still suck
Good to see you again bro missed you
Fuel and spark have the same simptoms try a knownmgood coil on the sportster.
Hey I think I'm overwhelmed with two bikes 😮🤪✌️
Tell me about it
Good luck! :)
Looks like we need to start a broken vehicle support group 😂
Yeah really!
Shovel has wore out tapet rollers ironhead needs brass mesh air filter .later Sportster needs power cones at the heads in the exhaust pipes Evo needs back pressure as well. Good luck
The rollers are fine. They're bran new
Just a thought but have you tried a new carburettor straight out of the box, when you are riding along at a decent rate the engine sucks fine dust through the carb at something like the speed of sound thereby wearing out the thing after a few years, good to see you saving these bikes!
Not laughing at you brother Corey,Laughing with you ! Isn't it funny how we choice to drive ourselves insane with these toys !
Yep
Some hydraulic lifters needvspecial pushrods that match them. I remember years ago i had a set
Mikuni carb the best there is in my opinion. Throw the rest away or sell them. To many bikes can stress you out. 2 is the perfect number for me. Evo all the way. A bagger R KING for the Ol lady to ride with me a good Softail for solo riding. I tried the shop full road; it was just too much.
man! seems like plenty of content in that garage lol good to see ya sir 🎉
And then some!
More bikes more problems!! 😁 Divide and conquer!!! 😎👍
You got that right
Only 8 minutes late
Getting better
Iron heads and Shovels were made to run on leaded gasoline not ethanol no lead fuel at gas stations now. yes closing the petcock and running the carb dry is a wise idea before putting it up. I keep my 77 Shovel alive by buying non ethanol unleaded and adding a quart of 110 leaded AV gas to it.
Should have kept that 103 twin cam man....lol
But then life would be boring
Too many Iron(heads) in the fire?? :)
My new 1974 Sportster would die just like that. Always seemed like it was starving for fuel. Didn't figure it out.
2:10 Im hearing the Drums beat Hot for teacher lol it sounded like a Shovel . I had Trouble with Andrews push rods I use S&S or SE screaming eagle . They are getting hard to find . I got a new set in 2018 have not seen no more on ebay
It seems the good stuff is becoming rare. The ones I got were some no name brand that I figured would do. Oh well
@@SaddleTrampTV Rev Tech was ok . Do not hear of them now . S&S has a few nice engines but the price is more then my first new car lol
yeah so those bikes keep you occupied.... well that comes with the territory of high demanding bikes I'd say. My guess would be that the one bike you've got plans with... could it be that this bike is going to be used to support young people...in Florida...?
😄 No reaction is a reaction after all...😄
Ideal S&S main jet on most Sportsters, Ironhead and Evo should be 66-70. If you're going much over a 70, look for other issues. It's getting enough gas.
They’re all machines nothing is infallible.
Yeah really.
Have you tried rocker lockers, the rocker shafts are machined out way to big and like on most twins with similar set up they tick like that. Rocker lockers fixed mine.
Never heard if them. Thanks for the info, Tom.
@@SaddleTrampTV and I bet anything you put in there to scotch the over machined mark on the Rocker shaft would work, I tore down a shovel 4 times over 29 years ago looking for that tick to find it was nothing if consequence but easily fixed. It usually shows up after a rebuild or upgrades . My twin cam started doing it after I put the 110 tire shredder kit on it . Next time I go into the Rocker box I'm gonna put Rocker lockers in it, but not gonna tear down a Rocker box that isn't leaking anywhere .
@@SaddleTrampTV my mistake, I was a Evo I tore down and fixed with the Rocker lockers, not sure but they might work on shovel
I'm curious about the shovelhead.
Are you running the stock oil pump?
I had to get a higher (flowing) oil pump for my 78.
(Not a higher pressure oil pump)
I'm not a expert by any means this what my mechanic advised when mine was done.
It's whatever pump came with the bike when I got it
would u like to buy another sickel !!! HAPPY TRAILS
Nah
Too bad that there is not a Craigs list for serial killers to come & clean out all of the squares on your block !!! Then you could do your thing at all hours !!! Second , the scooter has a harmonious rumble !!!
Where in Mississippi do you live, I'm from Alabama, not too far away. 👍
Gulf coast area
Have you ever considered just going back to that old Honda Shadow?
LoL...now that's fkn funny
@@stevenbonnesen5988 why? I bet that Shadow wouldn't give him all the grief the others have.
No fun in that
Question are those push rods the same for solids ? side play ???
No side play, or up and down lash. But still able to turn them.
Iron head doesn't have a vacuum assist fuel shut off valve does it?
It doesn't
Bad coil in softail maybe not fully igniting fuel? Get me ota work for a week ill ride down n help wrench 🤷
It's kinda what I figure. That, plugs, or something in the ignition.
Sounds like the rocker arm end play needs checked..
Maybe
If everything turns out quickly and from the first time, then life will become boring)))
Looks like you really like working on engines. So there ya go. Way too many Harley’s. Can only ride one at a time.
Ironhead could it be the condenser.
Maybe
🖐😎
n+1= more wrenching on bikes.