How To Install Home Assistant on Windows in 3 minutes
ฝัง
- เผยแพร่เมื่อ 15 เม.ย. 2022
- UPDATED!!!! Windows 11? Check out my updated video here: • UPDATED: How to insta...
In this video, we cover how to install Home Assistant and Virtualbox on Windows 10... FAST!
If you'd like to support the channel, you can do so by becoming a Patron at / fasthowto
Home Assistant VM for Virtualbox download: www.home-assistant.io/install...
Virtualbox installation download: www.virtualbox.org/wiki/Downl...
Some of my favorite home automation things:
Aqara temperature and humidity sensor (zigbee): amzn.to/3X2ubr3
Aqara water leak sensor (zigbee): amzn.to/3JkWH3P
Aqara door & window sensor (zigbee): amzn.to/3Ril7N7
Aqara mini switch (zigbee): amzn.to/3HlmmGK
Aqara motion sensor (zigbee): amzn.to/3kV2eDS
Conbee II Zigbee stick: amzn.to/40pORfx
Zigbee and Zwave combo stick: amzn.to/3yuqPTG
USB extension for Zigbee/Zwave sticks: amzn.to/3ySQGVL
Intel Nuc: amzn.to/3JcVivA
KASA outdoor outlet (wifi): amzn.to/3XOLoFl
KASA indoor outlet HS103 (wifi): amzn.to/3XOLVai
KASA single pole dimmer HS220 (wifi): amzn.to/3HgOaft
KASA single pole switch HS200 (wifi): amzn.to/3HHNEsC
KASA three way switch HS210(wifi): amzn.to/3kSZ0ks
KASA three way dimmer KS230 (wifi): amzn.to/3kQm2s8
Shelly 2.5 relay switch (wifi): amzn.to/40drGon
Honeywell T9 thermostat (wifi, homekit): amzn.to/3WOVvsD
Honeywell T9 remote zone sensor: amzn.to/3jfr5Sw
Sonoff S31 Lite smart plug (zigbee): amzn.to/3HDsb3U
Sonoff S31 smart plug with power monitoring (wifi): amzn.to/40fkvMk
Sengled bulbs (zigbee): amzn.to/3JH95vl
August 4th generation WiFi smart lock: amzn.to/3ksXZj3
Motorola MoCA Adapters: amzn.to/41h9LxI
Tripp Lite UPS: amzn.to/3M6sHJu
Tripp Lite extended runtime battery expansion: amzn.to/46DJiwC
Zooz Titan water shutoff valve: amzn.to/3slCB3v
My studio gear:
Cameras & equipment:
Canon 90D (primary and secondary cameras): amzn.to/3WOvmKz
Canon EF 24mm f/1.4 L II USM (primary lens): amzn.to/448iD8Q
Canon EF 24-105mm f/4 L IS USM: amzn.to/3QVqCBR
Canon EF 28mm f/1.8 USM: amzn.to/3DkPvAH
Canon EF 50mm f/1.4 USM: amzn.to/3jinlQk
Canon EF-S 17-55 f/2.8 IS USM: amzn.to/3kRZgQK
Canon AC adapter: amzn.to/3RgogNC
Canon DC coupler: amzn.to/3HcmTuK
Lexar Pro 128GB SDXC cards: amzn.to/3Drg7jA
ProGrade SD card reader: amzn.to/3HmPRYQ
Lowepro ProTactic 450 camera bag: amzn.to/3DoJras
Manfrotto 055 CX Pro tripod: amzn.to/3XOaMei
Manfrotto 055LC leveling center column: amzn.to/40aYm1R
Manfrotto MVH502AH fluid head: amzn.to/40eyOkw
Manfrotto 055 PRO3 aluminum tripod: amzn.to/3uu9pYT
Mics & Audio:
Rode NTG-3B (primary mic): amzn.to/3kGEbIL
Rode SM4-R shockmount: amzn.to/3Y8zo1m
Rode Videomic NTG (on-camera mic): amzn.to/3S9heNg
Shure SM7B (desk mic): amzn.to/3wEnX5H
Zoom H4n pro 4-track digital recorder: amzn.to/3Y365x6
Zoom F6 digital field recorder: amzn.to/3ZWxjHa
Cloudlifter for Shure SM7B: amzn.to/3Z31tqO
TASCAM DR-10 lav recorder: amzn.to/3kRvGLb
Rode lav mic: amzn.to/46ZFUM2
Windjammer for lav mics: amzn.to/3HFPDNM
Neewer boom arm mic stand: amzn.to/3WH8YCI
Rode PSA1+ boom arm for SM7B: amzn.to/3ODqM0l
Adam A7V studio monitors: amzn.to/48f1Pzp
Focusrite Scarlett 4i4 audio interface: amzn.to/49aFIva
Pig Hog 1/4" TRS to XLR: amzn.to/3OEhD7O
GLS XLR cables: amzn.to/3kXb97K
Lighting:
Aputure Amaran 100x lights: amzn.to/40dJqQp
Aputure Light Dome SE: amzn.to/40dJBex
Light stands: amzn.to/3Rethq2
Green screen: amzn.to/3jcOjJ3
Hair light: amzn.to/3RkyzQW
Rim light: amzn.to/3qlynb7
#homeassistant
#smarthome
#smarthouse
#howto
#tutorial - วิทยาศาสตร์และเทคโนโลยี
This worked perfectly, and let me get a head start on Home Assistant before my HA Yellow showed up. I think you've hit a perfect sweet spot for your channel tutorials of a whole bunch of people that are new to HA trying to figure out how to use it, while all the existing tutorials are using old(er) versions of HA.
That's awesome! I'm glad everything worked for you with no trouble. Thank you for the kind words about the videos and the channel, and thank you so much for watching!
Just playing around with HA at this stage but this was short and sweet, thanks. 👍🏽👍🏽👍🏽
Hello. I’m super new to home assistant but have to say this is one of the greatest videos I’ve seen to easily set up home assistant I’ve found. A little fast paced but I was able to install my first home assistant. Looking forward to watching more of your content to learn about the platform. Thank you.
Thank you so much for the kind words! It was meant to be a bit fast paced for the "in 3 minutes" part, but I figured TH-cam has a pause button if it's needed. :) thank you so much for watching, and if you're new, there are a lot of great videos on how to set up all sorts of cool stuff!
@@fasthowto yes. A 3 minute video took me 20 minutes but as a result of you instructions I was actually able to install a instance of home assistant when other video I was not able to. Thanks again for taking the time to create this video.
You can also set TH-cam ‘play back’ speed to .75x
@@edbouhl3100 thanks. Good tip
Instant subscription here! No fuss, straight to the point video.
Thank you so much for the kind words, and thanks for watching!!
Nice, quick, to the point video. Keep up the good work. Looking forward to seeing what you come up with.
Thank you for the kind words, and thanks for watching!
The "algorithm" showed me one of your videos, and I watched a few more of them. I like the quick and to-the-point feel of them, so I subscribed. I started my Home Assistant fun in April of 2022 and luckily kept the Wife Approval Factor in the positive range. Quick tips from channels like this are always appreciated. Keep up the good work.
That's awesome, I'm so glad to gear that you enjoyed them! Thank you for the kind words, and thanks for the sub & for watching! :)
Not all the secret is to explain very quickly. It is not a contest who speaks faster. INSTEAD OF 3 MINUTES, IT COULD BE 5-6 MINUTES OR EVEN 10 MINUTES OF AN APPRECIABLE QUALITY
@robysargl go make your own videos then, huh?
Keep up the great work. I appreciate the quick format. It also appears we have a similar set up and I can use the assistance getting it all together.
Thank you! The quick format is definitely a challenge with some topics, but I'm working on it. I hope you're able to get all the info you need; it always brings a smile to my face when I hear about people that have been helped by my content. That's what makes it all worthwhile! Thanks for watching!
I just stumbled across one of your videos and liked it. You now have one new subscriber and fan.
Awesome, thank you! :)
Awesome Video, I really like subscribing to and supporting new channels and yours looks like it has a lot of potential.
Thank you so much for the kind words. Please don't hesitate to offer feedback and advice, I'm trying to learn more and get better with each and every video that I make. Thanks for watching!!
There videos are straight and to the point. Keep that up!
Thank you for the words of encouragement. It's definitely a challenge to keep them short, especially on some of the more complex topics, but I'm trying!! Thanks for watching!
Excellent tutorial - clear & concise & it worked !!
Thank you, glad you liked it! Thanks for watching!
I never comment but this video was excellent for my extremely low level of computer literacy. It worked! Thankyou
You're welcome! Glad it helped!
Hello! Just wanted to drop by to say thanks! You got a great channel running and I hope you keep it that way! Some of your videos has been really helpful starting my Hassos from scratch since im pretty noob on this. Best wishes for your channel and good luck! PD: Add pig shirts to the giveaway hahaha
Thank you so much for the kind words. I'm glad you've found the videos helpful, that is my goal! :) Thank you for watching!
I didn't know I needed to comment to your very first video to be in the running for one of the prizes. What I should do is comment on all of your videos because I like them all. lol
The giveaways mentioned in the videos that are currently up at this time (as of 3/29/2023) have all concluded. However, there will be more in the future, and rules for them will be given when they are announced. :)
Glad I found your videos. Nice job.
Thank you so much for the kind words, and thanks for watching!
I am want to say a big thank you for this videos. 🙏
You're welcome. Thanks for watching!
Really helpful thanks. subscribed!
You're welcome, and I'm glad you found it helpful. Thanks for watching!
Thank you for making this video!
You're welcome! Thank you for watching!
Thank you this helped me restore my old home OS backup, i thought just dragging and dropping the clone into Oracle VM box would work but I kept getting errors when starting the system, following this guide and using the files from the clone fixed that.
Awesome, I'm glad to hear you found this useful!! Hopefully you enjoy my more recent videos as well - I promise I've gotten better. Lol
Great video. Worked perfectly. Thank you.
Glad to hear it, thanks for watching!
Excellent video. Looking forward to seeing more of your videos
Thank you, and thanks for watching!
This is a really good tutorial, I've just gotten into smartening up my home so everything is new to me (been a while since I've had that feeling with tech). But another thing I've also got into recently, is wanting to add a server to my home (so I don't need to keep my main PC on to access files, also gonna have my plex server on it). While it's not set in stone, I'm thinking I want to use Windows Server, as Windows is what I know the most, would the installation of Home Assistant on Windows Server be the same as in this video? Thanks mate. :)
Edit: Just looked at some of your other videos you have, guess I'm gonna be spending a bit of time watching your videos, great channel you have!
Thank you for the kind words! If you're going to use windows server, I would imagine you'll use hyper-V instead of virtualbox. I've not set that up before, but deploying the vm shouldn't be TOO different than this method, I wouldn't think.
Let me know how things go, and I hope you find the rest of the videos useful! 😊
Thanks for watching!
Like the wifi password automation video! Thought i’d throw my hat in for the 1000 giveaway and i like supporting growing chanels! Keep up the good work! If everyone drank more Bourbon the world might be a better place!
Lol! If everyone drank more bourbon, it would just be that much harder to find! :) thank you for the kind words, and thanks for watching!
Thanks kind Sir you made this so easy
My pleasure. Thank for watching!
Hi I keep getting a line that says failed to start RPC bind and then my VM gets stuck right after the area where I get the observer url. Have any ideas?
Edit: NVM I fixed that issue but now I’m stuck on the prepping home assistant screen for over 30 minutes and when I click the blue dot to see what’s wrong it says that the DNS failed and it had to complete a system autofix. What should I do?
Great video but I get the following error "Could not start the machine Home Assistant because the following physical network interfaces were not found: 450Mbps Dual-Band Wireless N Adapter (adapter 1)" yet this adapter is working and connected to the internet. Any ideas?
Does this start up with the PC on reboot?
Just a quick comment saying great job 👍
Thank you for the kind words, and thanks for watching! :)
Thanks. Tried for months to get this working. Your's is the first to be successful. Question - can I close the Oracle VirtualBox window or will that close the virtual machine?
Unfortunately that will shut down the vm - at least in the default config. There may be a way to change that setting, but I honestly haven't messed with it too much. I only use the VirtualBox instance for my lab/test/videos, so whenever it's running I'm doing something with it.
Thanks for the kind words, and thanks for watching!
@@fasthowto How about the opposite - Home Assistant in VirtualBox starting automatically when Windows starts - say when there is a power outage and I restart the computer?
Should be able to configure it to do that, yes. I've not tried, but I'm sure it's possible.
Saved me a lot of stress. Only have experience running Hassio on Linux servers with virtualizing. Switched to Docker where my Skyconnect ZHA was no longer supported as it has Thread firmware. Had to make a quick Hass OS just to unflush the updated firmware.
Thank you for the kind words, and thanks for watching!
Thanks for the help!
You're most welcome, thanks for watching!
Great info!
Thank you, I'm glad you found it helpful. Thanks for watching!!
excelent this manual work easy and quickly
Excellent! Glad to hear it was helpful for you!
it works! Thank you
My pleasure, thank you for watching!
thank you!!!!! it worked
Glad to hear it! Thanks for watching, and hopefully some of my other videos are helpful as well. :)
Can you use Zigbee Dongle eg. Sonoff 3.0 zigbee so just plug it in your PC and use it the same way raspberry pi would?
Yes, the feature is called USB passthrough
Hey, what about a small laptop with just 4 gb RAM. Because if I set the memory with 2048, it says invalid settings detected. I must lower it down. If I continue it will just display error notification and aborted. I try to lower it but still the same
I think you've answered your own question.
That must be a REALLY old laptop. I'm actually shocked it's even able to run windows 10. I haven't seen anything with less than 16gb in like a decade.
Hi, I'm "new" to the VM thing... can I install HA on a Windows PC that's used for a "Media" platform ... a Roon Server or does VM eliminate the "2" use practice?
I'm sorry, I don't understand what you're talking about. Can you elaborate?
When I ran START it finishes quicker than on your video (2:17) and doesn't look like the image and there is no IP Address. It mentions "mapping table". Wondering if you can help?
I'm just guessing since I've not seen that error before, but I would check the network mapping on the vm to make sure you have it using the correct NIC on your system.
i followed the same steps but in Oracle VM in the processeor it was greyed out(can only choose 1 processor) so when i push start i didnt get the black window with the ip. what can i do ... thanks
Same here
Same here
same here..any update?
I've not run into this problem before, guys, sorry... My guess would be that IntelVT isn't enabled in the BIOS maybe? I did just make a new video on how to configure this on Windows 11. Maybe something in there will help you out? If you do figure it out, please come back and let me know so I can help future viewers! Thanks for watching!
Great, concise video - thanks. Just about to buy a re-furb PC to get going in Home Asst. Once this is running in a Virtual Box on a pc does this mean that the pc is running Windows, AND running Linux HA at the same time? I thought that it was recommended that users buy an old PC with SSD, take the SSC out and "flash" over the Home Asst Linux over to this PC then that PC uses Linux for ever more and never runs windows (so no windows updates take place in the background)?
Thank you for the kind words! You are talking about two different types of installs. This video is for people who have a Windows computer, but nothing else. If you have dedicated hardware, there are many many different ways you can choose to install, all of which are topics for future videos. :) Thanks for watching!
@@fasthowto That's great - I'll keep watching
anyone know how to make it auto startup with windows?
Thanks for the tutorial. However I do have a question. How can I acces/change the configuration.yaml files? thanks
I've covered that in several videos. I think the intro one was maybe in my second video on the channel - seven must-do things after initial setup perhaps?
Thanks for watching!
@@fasthowto thanks I wil look into it tomorrow
Awesome how to!!!! No bs, just yes.
Thanks! Hopefully you like the rest of the videos as well. A little more bs, but still tons of great howto content. Thanks for watching!
@fasthowto I've been viewing all of them. I've had a fully integrated smart home since the casa Verde days in 2011, but I've just gotten into home assistant. You need to do a vid on PoE NVR camera integration. I have a Night Owl system and cannot find any content on how to integrate to HA. I think a lot of folks would tune into it.
@@fasthowto another good one, if possible, would be integrating an intercom system for Alexa or Google Assistant.
@@DaysAhead202That would be a good one, except I don't use any of that nonsense. Local ONLY here.
@@DaysAhead202I already did an entire series of videos on PoE NVR IP Cameras. You should watch all three videos. ;)
Flawless Love it.
Thank you! And thanks for watching, buch appreciated!
Seems like this only works for WiFi devices if I wanted to add Zigbee and Z-Wave how would I go about that?
Configure USB passthrough.
Thank you!!
You're welcome. Thanks for watching!
thank you very much.
You're very welcome! Thanks for watching!
hi I am stuck at waiting for Supervisor to startup... and later it shows 'Error returned from Supervisor: System is not ready wtih state: setup'
I've never seen that before. Were you able to get it working? Were you trying on Win10 or 11? I just made an updated video a couple weeks ago about how to do this on Win11, maybe there will be some helpful info in there?
I followed your video but when I imputed the address on my browser the preparing home assistant interface hs been loading for more than 30 minutes now.. Any help?
Same issue here
Same issue here, did you find a solution?
I've not run into that issue before. Were you able to get it working? Were you using Win10 or 11? I made an updated version of this video a couple weeks ago for Win11, maybe that will help?
Does this method allow for USB passthrough for zigbee controllers?
You can configure that, yes.
Hi.
Please can I get the installation link of Homa assistant for windows 10?.
Links to the software used are in the video description. Thanks for watching!
Thank you !! :-)
You are most welcome! Thanks for watching!
does it have to be through a Virtual Machine? and if so, should we give it more memory if this is the only thing that the windows machine will be doing?
No virtualization just try home assistant portable
@@ehbarooo I see there is no supervisor with the portable version… Is that a major drawback if we have automations etc. already set up?
@@derekswitzer9624 not at all ! All automation and integration work with portable !
I prefer the supervised version, rather than HA portable. As for does it have to be as a VM? No, you can run it on bare metal (I'm making a video right now about how to do that), or you can run it on a Raspberry Pi.
Started with old laptop but now running it on a Dell Wyse 5070 (added M2 Sata drive), using HA OS Generic x86-64 version. This is another option for those with the capability to run on VM or even on one of those over priced Raspberry Pi if they can even find one.
Also following directions.
Why did you switch from the old laptop to the 5070? I've got several old laptops here that are likely more powerful than the Home Assistant Blue I'm currently using. With the number of devices and automations and the complexity of my dashboard, I have begun to notice a slowdown in performance. My solution to that is a scheduled reboot of HA every night (I'll discuss it more in the next video), but I'm starting to think I need to look at alternative hardware. Thanks for watching!!
@@fasthowto I bought a couple of the Wyse with the intent to make 1 a PFSense or OPNSense router and the other to replace HA Laptop as I want to use it for another project. Well wife let me buy a Synology NAS during Christmas (she was running out of picture space on iPhone and Google Drive), so will use that to create the few VMs and/or Docker for the other Apps I was going to use laptop for. Plus the Wyse has a little lower power draw, got to save some money where you can.
Excellent - Can you do a video on installation to VMWare.? Thanks
Sure, I'd be happy to - but I don't have a VMware server here. If you'd like to help out, please contact me at the email address listed on my channel and I'll provide shipping info. Thanks for watching!
@@fasthowto OK - I'll work on something for you - but no need for any shipping.!! John Sydney. Australia
Hi! quick question, my laptop won't let me select to have 2 CPUs, do you know why that is and possible another work around option?
Sorry, I don't know the solution to this problem. Perhaps another viewer does? Thank you for watching!
@@fasthowto No worries! Thanks for the response!
For me I had an issue where AMD-V was disabled. I had to go into the BIOS and update the SVM to enabled and it worked!
Is there a reason others suggest using a Raspberry Pi over Windows? I already have a windows computer so this seems simpler. But it is my everyday computer, does it impact my computer in some way to be running HomeAssistant and is that the reason it seems the preference is towards Raspberry Pi? TIA!
I myself use a raspberry pi. The preferred method is actually to run it in some type of hypervisor, such as VirtualBox or VMware - but on a dedicated system that only hosts virtual machines. This is because it's easier to backup and restore a vm if you just make a copy of the file containing the entire thing, rather than trying to restore a backup from within the system. It's also easier to upgrade hardware since you just copy the file containing the vm onto the new system then. I created this video to give people a way to get into home assistant for free, so they could try it out using a computer they already had. Then if they find that they like it and want to stick with it, they can choose what type of hardware is best for their situation and invest in that.
@@fasthowto wow amazing! Thanks for th e detailed response and the original video! Both are incredibly helpful and that’s exactly what I’m going to do now to test it out. I assume the machine has to be running at all time as well? That would probably necessitate the dedicated machine as well? Thanks again. Super helpful!
@@patricksullivan9323 my pleasure, and thank you for watching! For testing or playing with it, no, it just has to be running when you want to mess with it of course. But yeah, if you're going to use it to control stuff, you will want it running all the time. A few other reasons I forgot to mention about why many people prefer RPIs over a dedicated pc or server are power consumption, noise, & heat. There are even more, but we're getting kind of into the weeds now. Maybe I'll do an episode about pros and cons of RPI vs pc or server. There are benefits from all angles, and negatives from all angles as well. Lol
@@fasthowto Awesome, well I do love getting into the weeds after all haha! Thanks so much for your responses. All makes sense to me. I'll keep an eye out for that video if it ever comes, no pressure tho!
@Fast How To biggest issue sith rpi is availability. Why mess with it?
There are a ton of more powerful pc's at same price range with zero availability issues. Seem no reason to wait wait wait and mess with rpi.
Hey will we get the Supervisor tab with this process. Will it be a 100% Full fledged experience?
HAOS includes the supervisor, yes.
@@fasthowto oh wow thanks then i found the perfect solution to try HA as I'm not a pro and first want to test before investing in any hardware. This is so helpful
Hi, I don't have other linux 64 bit in version settings, can you help me please, I can't find any other problem. When starting, it just says error. I have windows 11. is that the problem?
Possibly, but I doubt it. What options do you have listed to choose from?
@@fasthowto
My virtualbox does not have any 64 bit option, only 32 bit. I too use Windows 11.
Do I need to choose 32 bit?
Thanks.
Just tried today and Virtual Box 6.1.38 is not giving me any 64 bit options and I can't choose # of CPUs (its grayed out). This is on Windows 10. Thought maybe I installed 32bit version of Windows somehow but it is 64bit. I am going to try an older version.
@@ericmacintosh2716 ..i had the same..only Linux 32 bits...and 1 CPU ... i changed in the BIos of my Windows 11 Lenovo Tablet PC the options Secure Boot to on....and TPM on...and Virtual Machine to on...now you can change it to linux 64 and virtual cpu to 2....and the Virtual HA is working fine !!
Forgot to update this but I had to enable TPM in my bios and then it works fine.
Just to be sure, this install is for a dedicated PC, right? All the steps are being done on the actual PC that will be used for HA?
I'm not sure I understand the question. You are free to perform the steps on whatever PC you like for whatever purpose you like. I mean, it's your PC, and your VM, so... ??
Thanks for watching!!
@@fasthowto So basically when I follow your steps I’m creating a VM with HA installed, correct? So it will become a dedicated machine running HA.
Hello everytime i close oracle vm virtual box my home assistant not run is that natural
Yes
Bridging doesn't work because of WIFI adapter any work around?
No idea. I would never use wifi for something like this.
Can i run HA on a clean machine with no OS on it?
Absolutely. See one of my recent videos about how to Install on an Intel NUC (or any x86-based PC). Thanks for watching!
When I enter my IP address into Firefox it just gives me a blue screen error page and force restarts my PC. Any ideas?
Me 2 any update
Ok so I got everything installed. When I get to the ip address section mines is blank. There's a ipv6 but there's A LOT if address. Not sure what to do
If it's blank, it didn't get an address from dhcp. Do you have a dhcp server on your network? Did you configure the virtual nic properly?
When you get error: Error returned from Supervisor: System is not ready with state: setup , enter in the CLI, ha > banner ,this will solve this, i had it to do twice.
I'm unable to change the amount of processor from 1. Any idea why it's greyed out?
Bios settings
@@fasthowto wow thanks for such a quick response! I just figured it out lol. Great, quick video!!!
@@bedkeepstrying Thanks! Be sure to check out the one for 7 things you should do after install
Why don't you have supervisor and add ons options. Isn't this the Homeassistant OS? I downloaded specifically hass OS and also don't have those options
Not sure where you went wrong, but supervisor and add-ons are most certainly available.
@@fasthowto I did everything like you, but when I click on configuration and add ons, the page just freezes and I can't click anything. Tried everything again on my laptop, same thing happened
hi, i tried entering the ip address but the site cant be reached. is there any solution for this?
Did you check the console to make sure it has finished booting?
Thank you
You're welcome! Thank you for watching!
t would be helpful in the future to hover, pause then say what you were clicking on. I had to rewind several time to figure out how you got there.
THX!!!
You're welcome!
Will this work for Windows 10 IOT?
Never tried, all I have here is Windows 10 Pro. Give it a shot and let us know!
Thanks for watching!
When you get error: Error returned from Supervisor: System is not ready with state: setup , enter in the CLI, ha > banner ,this will solve this, i had it to do twice.
What’s a CLI
I entered it next to ha > “banner” and it didn’t work
I just get "Preparing home assistant web page" and nothing changes
During the making if that video, I must've deployed that thing 2 dozen times. Sometimes it was immediate, other times it took 20-30 minutes. No idea the cause of the delay. Let me know if you get it sorted, and thanks for watching!
I followed all the steps but i do not get the IP address after the boot? Please help
Is your router or firewall acting as a DHCP server? If not, you'll need to configure that. Then once you see the IP address after the initial boot, you can go in and configure a static IP. I'll make a quick video showing how to configure a static IP. Thanks for watching!
I get error returned from supervisor: System is not ready with state : setup
From another viewer: When you get error: Error returned from Supervisor: System is not ready with state: setup , enter in the CLI, ha > banner ,this will solve this, i had it to do twice. Hope that helps!
@@fasthowto I connected everything but none of my Wi-Fi smart home devices are showing on home assistant but everything is connected. Any tips?
@@MrBlubby No idea. Depends on what devices you're trying to use. If this is your first go-round with HA, I'd suggest watching some more of my videos where I cover how to add various devices.
@@fasthowto I use tapo, imou, gosund , led Vance and more which are Wi-Fi.
Why use "Virtual Box" rather than "Hyper-V" btw ?
The list is long.
🎉🎉🎉
Thank you!! :)
Did somebody say Giveaway? :)
Subtle.. Lol thanks for watching, and good luck!
No IP address shows up for me.
Do you have a DHCP server on your network? Did you correctly configure the NIC bridge in the VM settings?
Thanks.... but also... how is the average consumer supposed to know all of these details? like... huh!?
You're supposed to watch the video. Lol
Well 20 seconds in and Inhave no fucking video what is going on. My shit looks nothing like that already. I’m seriously regretting this fucking grow room already
installing it on a virus ? no thank you.
Thanks for watching!
there are so many parts where you say one thing and do another.
Such as?
not reliable at all.
It's not meant to be...
@@fasthowto I'm curious
@@mrtube1012about what? You're going to have to start using complete sentences, because my crystal ball is in the shop.
It seems like a contest of who speaks faster. The computer lags between what it shows and what you say... In total, it's very rushed shit... If you do like other users with the clear explanation in the right time with the image that shows what you set. From my point of view, you should redo the footage with good quality without so much haste. USELESS FOR BEGINNERS. Useless even for the advanced because they know the steps.
I guess TH-cam on your computer doesn't have a pause button, huh? That must suck. Also, you could relax JUST a bit and realize that this was the FIRST video on this channel, and maybe take a look at some of my later work to see if I've improved. But hey, that's cool, being a jerk is the "in" thing to do, right? What's the name of your channel, again? I'd like to go check out what perfection looks like.
PS - thanks for watching!! :)
1:19 cant get pass this part when i go to pick the file its no longer there but its not your video its me I can follow videos like this to a T and im always stopped b4 I can get finished but ita me i have a curse on me cant do anything.