Do you ever use the centring pins on your front wheels. Even though there hub piloted there not centered. I got three of them. put them in. Then tighten wheel. Then take them out. A old tire guy that’s changing truck tires for fifty years told me about them. There not that expensive. He also has a tool he made. It’s a wheel on a good sized electric motor. Pushes up against your tire. Runs it to about 60 mph. Sometimes he said you can get a brand new tire out of round. He said a good tire and rim. Shouldn’t need any balance weights etc on it. I been running 11245 Michelins for last ten years. Never had to balance any of them. That’s good you found yours out of round. That’s hard on everything. Take care. Enjoy your videos. You are never to old to learn new things. Keep the shows coming. Need more flip flop stories.
No your right I loaded a coil in riverside Illinois last week. Don’t haul coils very much. I used some of your knowledge when I loaded it Wednesday. Loaded out of Cleveland cliffs. Good place. Have you ever been there. Didn’t have to tarp. Loaded with a big forklift. Take care.
When I was in school on one of the training drives going 55-60 suddenly the left front started slamming around like a bunny on crack-I was sure the steer was shredding. I look over at the instructor, a 2M miler and he’s just looking back at me like...’what?’ Suddenly as it started it stopped. When I started taking oxygen again I said what the bloody bleepin heck was that? He said it was the spray in balancer crap his brother used, sometimes it broke loose like a tennis ball in the dryer. That was enough. I’d hate to actually lose a steer. Sucks they’re that $$.....
I don’t have that spray in stuff. These are actually wheel balancer‘s that mount between the hub and the rim, don’t know if they actually work or not and I’m actually going to go check them out tomorrow, they may or may not go back on the truck
That tire would be made for those bridges that use the prestressed concrete beams... bouncy bouncy all the way across. Time it right to cancel it out! Great that you have a simple way to check it.
My question is what causes them to be out of round? I’ve changed one before due to being out of round but I’d assume there’s a suspension/steering component to blame.
Maybe, but it could be anything, a defect in the manufacturing, hitting a bad pothole at the right angle damaging the steel cords, causing it to go out around. …..The possibilities are so many it would be impossible to determine what actually caused your tire to go out around.
Tire wasn't seated correctly at install. Tire is going around the same as the bead. When it's new you don't feel it. When it starts to wear you will. You can't fix it. Tire gets installed correctly or it comes off prematurely. I see it all the time from other Tech's
When mounting truck tires look for the engraved mold bead to be concentric to the wheel’s edge . After replacing tires the inflating should be done in the horizontal position to 5 lbs. before setting into a tire cage to full inflation . The weight of the wheel may cause the tire bead to fold in the vertical position .
where did u get tha auto wheel balancers at? i stay in tha shop for alignment n balances. anyways i jus replaced my steers bout a month ago need drives now.
They came on the truck but most truckstops sell them. I don’t know if they’re actually any good but when they take the wheels off the truck tomorrow I’m gonna give them a look over and they may or may not go back on.
@@sturgelltruckingllc4074 yea let me know how that goes and ok i kno what ur talkin about. i thought it was just some expensive cheap junk they try to sell us. i thought u had something special nobody knew bout 😂
@@sturgelltruckingllc4074 I suppose the full, correct sentence would be ‘The phrase is not “out around” for fucks sake, it’s “out of round”’. But i was trying to be concise and eschew obfuscation.
Do you ever use the centring pins on your front wheels. Even though there hub piloted there not centered. I got three of them. put them in. Then tighten wheel. Then take them out. A old tire guy that’s changing truck tires for fifty years told me about them. There not that expensive. He also has a tool he made. It’s a wheel on a good sized electric motor. Pushes up against your tire. Runs it to about 60 mph. Sometimes he said you can get a brand new tire out of round. He said a good tire and rim. Shouldn’t need any balance weights etc on it. I been running 11245 Michelins for last ten years. Never had to balance any of them. That’s good you found yours out of round. That’s hard on everything. Take care. Enjoy your videos. You are never to old to learn new things. Keep the shows coming. Need more flip flop stories.
I’ve never heard anything about these, not even sure I grasp what your telling me but I will google it because like you said never stop learning
Just looked them up, nope I’ve never used them heck I didn’t even know about them, something to consider I suppose.
No your right I loaded a coil in riverside Illinois last week. Don’t haul coils very much. I used some of your knowledge when I loaded it Wednesday. Loaded out of Cleveland cliffs. Good place. Have you ever been there. Didn’t have to tarp. Loaded with a big forklift. Take care.
@@rce8540 yes sir been there a lot
I've had better luck with Continental over Bridgestone onnmt t680. Plus, it's a little cheaper also.
When I was in school on one of the training drives going 55-60 suddenly the left front started slamming around like a bunny on crack-I was sure the steer was shredding.
I look over at the instructor, a 2M miler and he’s just looking back at me like...’what?’
Suddenly as it started it stopped. When I started taking oxygen again I said what the bloody bleepin heck was that?
He said it was the spray in balancer crap his brother used, sometimes it broke loose like a tennis ball in the dryer.
That was enough. I’d hate to actually lose a steer.
Sucks they’re that $$.....
I don’t have that spray in stuff. These are actually wheel balancer‘s that mount between the hub and the rim, don’t know if they actually work or not and I’m actually going to go check them out tomorrow, they may or may not go back on the truck
That tire would be made for those bridges that use the prestressed concrete beams... bouncy bouncy all the way across. Time it right to cancel it out! Great that you have a simple way to check it.
😂
My question is what causes them to be out of round? I’ve changed one before due to being out of round but I’d assume there’s a suspension/steering component to blame.
Maybe, but it could be anything, a defect in the manufacturing, hitting a bad pothole at the right angle damaging the steel cords, causing it to go out around. …..The possibilities are so many it would be impossible to determine what actually caused your tire to go out around.
@@sturgelltruckingllc4074so after you installed new tire you didn’t have that problem again?
@@realskata16 nope all good
Tire wasn't seated correctly at install. Tire is going around the same as the bead. When it's new you don't feel it. When it starts to wear you will. You can't fix it. Tire gets installed correctly or it comes off prematurely. I see it all the time from other Tech's
When mounting truck tires look for the engraved mold bead to be concentric to the wheel’s edge . After replacing tires the inflating should be done in the horizontal position to 5 lbs. before setting into a tire cage to full inflation . The weight of the wheel may cause the tire bead to fold in the vertical position .
where did u get tha auto wheel balancers at? i stay in tha shop for alignment n balances. anyways i jus replaced my steers bout a month ago need drives now.
They came on the truck but most truckstops sell them. I don’t know if they’re actually any good but when they take the wheels off the truck tomorrow I’m gonna give them a look over and they may or may not go back on.
@@sturgelltruckingllc4074 yea let me know how that goes and ok i kno what ur talkin about. i thought it was just some expensive cheap junk they try to sell us. i thought u had something special nobody knew bout 😂
Who did you call from crst to get discounted tires.
Icap….
Thank you
@@David-j1g2k just bought a new set of drives yesterday and I’m putting a video together on that, wait till you see how much I saved🤗
"out of round" ffs
Is this a question? I don’t know what FFS means???
@@sturgelltruckingllc4074 I suppose the full, correct sentence would be ‘The phrase is not “out around” for fucks sake, it’s “out of round”’. But i was trying to be concise and eschew obfuscation.
@@therealxunil2 really? You stopped by just to correct my grammar or phrasing? Bless your little heart I appreciate ya🙄
😢
Bad shocks causes that, yes shocks can leak internal
Shocks cause depression wear not out of round