I have successfully started an engine that has been forgotten for many years
ฝัง
- เผยแพร่เมื่อ 28 มี.ค. 2023
- COPYRIGHT BY TRAN LONG HO.
Original Facebook fanpage / thánh-chế-mr-hồ-109271...
Main Gmail - longho.tranccc@gmail.com
Name - TRAN LONG HO
I have successfully started an engine that has been neglected for many years
tôi đã khôi phục lại thành công một động cơ đã bị lãng quên nhiều năm trên bờ biển - แนวปฏิบัติและการใช้ชีวิต
Phải có sức khỏe, học thức, niềm đam mê và sự kiên nhẫn mới làm được những công việc phục hồi động cơ hư hỏng phức tạp như thế này. Bạn quả là một nhân tài trẻ đáng quý của Việt Nam!
😊😊
Nissan motor company should sponsor him a complete workshop, and use this as a commercial on their engine`s. impressive work!! :)
Просто двигатели Nissan на столько выносливые что их не только море не может убить но и кривые руки
I think I am going to go out and find me an old 4 cylinder Nissan Diesel engine now...I just cannot believe my eyes and ears on this one. To come so far from where it started off as and run with no oil or water all while leaking diesel like a siv. I myself have been a mechanic for 20 years...I simply do not have this man's magical talent. 😂
Actually he is the owner of Nissan company..this is a secret between us
They should also gifted him a Navara so he have a proper truck to go out and work!!
Привет, брат! Не перестаёшь удивлять золотыми руками!) С любовью из России!))
Bạn ko những giỏi mà còn có tinh thần bất diệt, ko có gì làm Bạn chùn bước. Mình rất rất hâm mộ Bạn ❤❤❤
Nissan should buy the engine and put it into their museum (firing it up regulary). What an amazing job!
I'm a mechanic in the US and brother I'm absolutely impressed with your abilities. Highly resourceful and determined.
😅
at least he forgot to torque the bolts
@@vuvinh2032he didn't forget, he used the good'ol good and tight haha
He should be a mechanic in the states. He would blow most out of the water with his talents.
I’m a mechanic from south wales uk , I wish I was patient like you , I’m very impressed with your hard work
I’m sorry but this has to be fake
@26715
I was WAITING for some drooling moron to make that stupid comment.
Thanks for not disappointing, fool.
That engine was dead to rights, but you pulled out a miracle and brought it back to life. I was impressed with the whole project!
Wouldn't have touched that engine with a ten foot pole. You're a legend.
Felt the same way, not even sure it would have been worth adding to the scrap pile as bad as it was looking. Most impressive to have had the patience to bring it back
It'll blow up in 30 minutes....
he didn't even change the O ring on the pump....
@@matthiasweigel311 It doesn’t matter, many components were totally destroyed by the sea water and air, and yet he achieved what he said he was going to do, he got the engine to run.
It was entertaining to watch, a project I most certainly would not have ever contemplated.
Well done to him, and I hope he gets paid well off YT for his efforts.
It was an extreme gamble with the cylinder bore and bearing surfaces, but his machining skills made the difference👍
Thank you for your interest and comment❤
cảm ơn các cô chú anh chị và các bạn đã quan tâm và theo dõi ❤
چرا روغن دیگه نریختین داخلش؟؟
Tôi thích những video mà bạn làm, người anh em, tôi muốn nó giống như bạn đã tự làm mọi thứ, lời chào từ Indonesia🙏🙏
Проделана большая работа по восстановлению этого хлама , это сколько нужно иметь терпения и энтузиазма. Респект к тебе дружище !
Он как археолог рылся в нем))
Рылся рылся и завёл без масла и охлаждайки)@@dimkacras
Этот двигатель все равное не для эксплуатации, поэтому какая разница))
I am blown away that you got this started. Best part is there wasn't a torque wrench in sight.
yeah, is not gonna durable enought
Смотрел и ждал с превеликим удовольствием. Респект и уважение на сложный проделанный путь👍👍👍
Спасибо большое!! Видна работа, а не замена на новое, понятно, что прокладки сгнили, везде песок, всё промыто, прочищено, смазано и налажено!! Очень приятно, прям тепло на душе!! Золотые руки!!
Пзазазазвх надеюсь это сарказм?
@@Devariant99 а ну ещё супротэк конечно же, бро 👍😆
già rồi mà khi cem tôi đã quá ngưỡng mộ, một tài năng khó tìm có sau này, chúc em luôn sức khoẻ
My
@@harigovind1534รึ
@@harigovind1534 llllkllll
Pm
Ol
L
L
L
Oopmol
L
Lpm LM
Lo
9l
O(｡≧ʕ•ﻌ•ʔ
Pl
L
≧ω≦:)):-$:-$o
Watched all three parts. Excellent rebuild!!! 🙏😲
just astonishing ! ... Mr Ho has to be the best engine restorer on TH-cam
Отличный мастер- механник!
Достоен ввсочайшего уважения!❤❤❤!!!
To say that was amazing is an understatement, the amount of work that you must have put in to get that engine running must have been very long. You are an incredibly talented and knowledgeable man.
Прлучил большое удовольствие от просмотра! Спасибо за ваш труд! Привет из России!☺️
Thank you for your interest and comment
@@Mr_Ho Россия здесь, мы смотрим вас! Спасибо за залипательный контент!
@@snowdannat не стыдно признаваться что ты из Соссии? Это же сейчас как клеймо фашиста.
@@snowdannat росія в сраці, хіба що
Какой нахер труд, да это пздц,разобрал почистил собрал, где замер зазоров, где сцук Динамо метрической ключ, да блин ремень ГРМ и ролики это одноразовые вещи, где прокладка гбц, где масло насос, где масло, что эт за пздц
And he did not disappoint. I’m impressed with the techniques in removing rusty bolts. I’ve repaired a water damaged engine before but this takes it to a whole new level. The amount of the old engine you were able to re-use is staggering. Electrolysis is another way of removing rust. Well done.
I hope you understand that restoration like this - for video and restoration for normal work - is two different restoration
@@CircleViolence Это для вас😊 Для них, это нормально будет работать и выполнять свои функции.😊
んー素晴らしい、の一言です。
@@CircleViolence I understand that. The state of the injector pump was not going to last. Just the mere fact that he managed to get the engine to run is impressive given the state of it.
yang terpenting dia bisa menghidupkan mesin tua kembali
Thank you very much. Most mechanic workshops do not have this experience. Rather, they only replace parts, and most of the time they are not really the cause of the problem. Thank you, great work.
Reo hò! Reo hò! Reo hò! Xin chúc mừng nồng nhiệt rất nhiều sự ngưỡng mộ và trên hết: Cảm ơn bạn!
Золотые руки у тебя в наше время редкость.👍
Надеюсь это сарказм.....?
Он без масла его запустил, этот мотор труп
А крышка тебя не смущает? 🤣🤣🤣🤣🤣
Это уже из области магии- оживить двигатель в ТАКОМ состоянии!Супер!)
совершенно волшебно, но при этом абсолютно бессмысленно. ибо жизни такому мотору до первой нагрузки
@@6o6ep_B_Tpycax думаю с их климатом все таки режим более щадящий нежели с работой в перепадах на зимний период
Можно было этого не делать, а супротека плеснуть
@@6o6ep_B_Tpycax хорошо если он хотя бы минуту проработал
Судя по всему движок разъело солёной водой, такой труд ложить ради минуты славы сомнительное удовольствие
Boa noite. Sou brasileiro e acompanho seu maravilhoso trabalho no canal. Você é um gênio. Um grande abraço bem brasileiro❤❤🎉😊
Absolutely amazing work! If I was able to, I'd employ you as an engineer any day! You're clearly the man to know during the apocalypse. Nissan should sponsor you with a fully kitted out workshop. Again, absolutely amazing job! 👍👍
Great Video, Loved it! and thank you for taking us along on this restoration, Mark from Australia! 😀
*_Another perfect restoration. Thank you for sharing it. Keep up the fantastic work._*
Колосальный труд! Да еще изготовить прокладки с кольцами, востановить подшипники, всякие крышечки и тому подобное изготовить на коленке.☺
Quando eu vi, logo pensei que era mais fácil vender como sucata. Impressionante o trabalho desse rapaz. Ressuscitou defunto!
This was the most impressive engine restoration I've ever seen in my life
These videos are fake, theres countless YT videos showing how they do it.
@@uhtred7860That's lie.
@@uhtred7860 I don’t think this is fake dude, he just got the engine to run for a couple minutes for the video and that’s it. How would you fake that
@@uhtred7860the Indians electricity ones are fake. Hard to fake with an engine while the valve cover still showing leaks everywhere lol
@@damiann4734 There are a lot of videos on YT showing how they fake, this type is called a "mild fakes" as opposed too "strong fakes". Lets be honest, to call this a restoration is extremely misleading.
Это жесть. Мотор поднят для одного запуска, больше всего мне было интересно про ремень грм, сальники и прокладки, думал, купит ли он хоть одну новую деталь)) но нет, всё нормально 😅
Однозначный лайк за проделанную (но к сожалению бессмысленную работу)! Думаю монетизация от ютуба всё оправдывает, но просто жалко труд, т.к. это творение просто в чермет пойдёт в итоге
Поршни другие.
Поддон тоже, тот сгнил полностью
Так он от монетизации и кормится. Пошёл купил такойже бу и вуаля.
Особенно тнвд. Плунжера так не будут работать там Пренцезионные поверхности.
распредвал стоит на этот двигатель 83к
Nếu lấy hình tượng động cơ như một cơ thể, thì "cơ thể" này chẳng những đã "chết" mà còn đang ở tình trạng "phân hủy" nặng. Bạn là một siêu tài năng làm sống lại cái "xác' đã phân hủy. Bái phục
You are not just a technician you are an artist...
У меня нет слов)) люди новые моторы не могут нормально собрать) золотые руки у тебя!
Astounding, super impressive in this disposable age. This is the guy that will keep everything working in the apocalypse
This is impressive ! Great patience and mechanic mind. Nobody would make that rusted ball of junk to run, but only you..wow !
Well, i have never seen ANYTHING like that in my life!!!
It puts into perspective what i have to do to my 1942 International W6 tractor engine completely!!
Well done my friend👍👍👍
Just dont show the END of the video at the beginning in future, it spoils it a bit👍
Quá giỏi ,coi đi coi lại vẫn thấy khâm phục . Chúc a luôn nhiều sk và thành công
I really hope this is real. The thought of mr Ho being this skilled just makes me feel good about the world. Also, pro tip: watch it at half speed, the enjoyment lasts twice as long
The engine was real real crusty. The restoration was real at least.
In what way could this not be real
The hard work was definitely very real, the piston he replaced was unavoidable and with a few more parts to get the oiling system working again it could no doubt be run for long periods but I don't think that was the point, I think the point was to get it to run again and that he did.
I thought it was very cool and entertaining to watch, I especially liked the bit with the old bloke making the head gasket.
Nice. Great job. Boring thing in process but successful
You are the best at what you do. Very excellent work.
Не, ну это просто колоссальный труд 💪🏻 Мое почтение! Как всегда получил огромное удовольствие от просмотра❤️🔥
This does not get old, massive respect 👍👏👏👏👏,
Quá tuyệt vời
Bạn kiên trì và rất thông minh
❤❤❤❤❤❤
I didn't believe that you would be able to restore such a rusty engine.... Well done, good job!
Not only does he have to get every piece perfect but he has to set up the cameras to let us see how he does it! I just would not have the patience!! 😬
Mr. Ho needs a Nissan sponsorship after this 😅
Timing belt broke? All for naught? Great video. Just the fuel pump alone, let alone the head gasket.
Excellent work.. as a marine engineer myself i thought the job was impossible. And i thank you as i picked up some nice techniques i could use
I honestly wasn't sure if your videos are real or not because you tackle such impossible looking projects that seem gone past the point of no return, , and this one definitely is real. Great work !
My God, it's like a brand new NISSAN made in Japan motor for FREE, just add time and experience. You're a legend.
Золотые у тебя руки дружище 👍😎
bạn rất giỏi... tôi rất thích những chiếc thuyền bạn chế, nên dành thời gian cho việc đấy nhé, tôi rất muốn có được 1 chiếc xuồng bạn chế đó
I was amazed that they could fix the engine in such a miserable condition and get it running. And I was even more surprised that the engine was a Nissan engine. Thank you for this wonderful video full of surprises.
The tongue is speechless when I saw it for the first time. I said it is impossible to restart that engine because of the rusty state it was in because of sea water. But with will and love for work, experience, mastery and skill, the engine is back to work again. You deserve a million likes.🎉🎉🎉🎉🎉🎉🎉
thanks to this video, I believe now that nearly any thing can be restored, even looking like a absolutely hopeless ❤ thanks for inspiration
O melhor vídeo já feito aqui no TH-cam parabéns meu amigo 👏✌️🔥🚀
This guy loves machines and exploring ways to rehab the seemingly impossible! Fabricating his owner head gasket alone is impressive!
I wonder how the engine is to be later put to use.
Did the timing belt failed at the end????? Oh god...
Amazing restoration, great job!
ABSOLUTELY AMAZING! I've never seen anyone resurrect an engine that far gone! IMPRESSIVE!!!👍
Well Done Mate!
Just amazing, the talent and most likely without a formal education in motor mechanics. All the best to you fellow.
This guy is a true master at what he does. 👏🙏
Irmão e disso que eu falo recuperar um motor abandonado , travado e todo enferrujado , você operou um verdadeiro milagre , gostei , parabéns , estou impressionado com seu trabalho , que não foi facil , agora e pintar que fica mais top ainda , parabéns , show , excelente trabalho
partiu a correia 2 minutos depois de pegar mas esta top só falta pintar....
Parece bomba injetora bosch
This Guy's Head is beyond repair. Using which anything can be restored. Hats off to you.... maniac..
As a german mechanic, i can say chapeau buddy - u did very well
I’m more impressed how you’ve remembered to put it all back together. Only issue with a wire wheel is it pits everything.
Damn that is impressive work. I know it isn't running perfectly but considering the shape that engine was in just running is awsome. Thank you for posting.
Nissan!! Toyota!! Destrucción imposible!!! Saludos desde Argentina!!
How on earth did dirt get in behind the piston rings?
Amazing job too 👏
I can imagine all the hours of work…it is very impressive
best rescue/rebuild video I have seen yet on TH-cam. Well done, sir! Subbed..
Great work restoring that old engine. 👏🏽
I can tell you most people would not even give that a second look. I have worked with a lot of Rusty stuff beings that I live in what we called the Rust Belt here in America the Northeast where salt is used on the roads in the winter time and everything just degrades. I have to say Sir that this is probably one of the most impressive videos I have ever watched, but then again I am impressed by most of your videos. That's why I watch! Mister Hollow keep doing what you do
That's nuts! I'm surprised it ran at all! Hopefully after you build a little stand for it, hookup some cooling water and give it another go, it will bed the rings and valves in and run smoothly.
Nhìn cái máy này, chắc kỹ sư Nhật, Đức, Pháp bó tay với bạn. Thật kỳ công, xin chúc mừng bạn.
Mr.Hồ rất tuyệt.
Bạn giỏi và khéo tay quá. Xin chúc mừng! 😉❤👍🏻
As a diesel mechanic …that was beyond incredible !!!
Sou do Brasil, tô adorando essa saga , você é muito bom 🇧🇷❤
After I die please call Mr Ho to bring me back to life...He should be a heart surgeon not a junk restorer! Genius!
Просто не вероятно!Так все качественно обработано и собрано,а это ведь нужно ещё суметь разобрать..
но все таки, странно что автор не восстановил поддон картера, крышку клапанов и не залил масло.
Привет из России 🇷🇺
где тут качество? в поршневой износ, картерные газы вырывались бы и двигатель ушел в разнос. с такой самодельной прокладкой и никакой фрезеровкой- газы, масло и охлаждайка смешались бы вместе, что и видно в видео, с трубхи охлаждения идёт дымок. движок поработал на масляной плёнке, а потом видимо распредвал начал подклинивать и старый ремень этой нагрузки не выдержал. клапана встретились с поршнями и я сомневаюсь что теперь он молотком выравняет клапана и повторно его запустит. хотя он тот ещё воскрешатель)
@@San4o0409 все ради одного запуска я думаю. Контент который возможно окупит потраченное время.
I was skeptical at the start as that engine was too far gone but I guess there's no such thing for Mr Ho. Amazing
Ty for uplifting me brother with your great example of dedication, work ethic and great camera skills! You inspire people like me and others around the world. Bless you much love and success brother!
Прекрасная работа, респект мастеру !!!!!!
Not only is this guy great at bringing a heap of junk back to life he is extremely talented at video editing too 👍😊
Meus parabéns, você ganhou um fã aqui do Brasil, estou ansioso por mais vídeos seus!
Thank you for your interest and comment
После просмотра видео пошел и заказал новый ГРМ.
Хотя, стоп - нам даже не показали способ чудесного исцеления съеденных коррозией поршней
kỳ công thât, không yêu nghề không làm nổi. khá khen cho ông thợ máy quá chuyên nghiệp.
_I would have changed all the main bearings/bushings and piston rings._
*But I wouldn't be able to move an engine in that state, here the parts are very expensive. You did an excellent job!*
This man can restore anything. Even broken marriage i bet he can restore.
من الجزائر
عمل رائع و مضني
مع إمكانيات تقنية لهذا الميكانيكي رائعة
شكرا لقد اعدت الامل في عالم المعادن لكثير من المحركات التي تنتظر التذويب
ههههه
شكرا أيها المكرم
Diesel mechanic: 'That engine will never run again.'
Mr Ho: 'Hold my tea.'
So this man is some sort of engine wizard / whisperer right? Impressive skills my dude!
Admirable y nivel epico en mecanica.. eres muy cuidadoso y detallista en la restauración.. el mundo seria mucho mejor con personas que reciclan mas los recursos. Gratitud y respecto por un buen trabajo muy profesional 🥇🥈🥉
I salute to this mechanic by two hands.
Very very few people impress me. You made me watch in awe. You have just about done the impossible. You are a master !
Молодец. У тебя золотые руки. Не бросай заниматься любимым делом. Снимай видео. А мы тебе будем рады поставить лайк. Из России с любовью.🇷🇺
That is super impressive what you did with that engine, though I bet it would have high miles on the engine