Engine Rebuild - Pacific Engine & Machine - Tacoma, WA (253) 396-1814
ฝัง
- เผยแพร่เมื่อ 15 ม.ค. 2012
- www.PacificEngineAndMachine.com
Pacific Engine & Machine - Tacoma, WA (253) 396-1814
How do you rebuild an engine?
Created by Pacific Engine and Machine in Tacoma, WA this video covers many but not all of the services we provide.
For more details on getting your engine built to race specs or just getting more performance out of what you have, call us. - ยานยนต์และพาหนะ
Hello. I want you to be affiliated with your explanatory film. This is the best made movie that visually explains the BEST in anything I've seen on TH-cam. Even a person who doesn't understand anything about mechanics would understand. Thank you again for your professionalism.
Finally a shop that doesn't soak a piston in oil. I had a very famous engine builder tell me the piston rings don't run oil so don't soak them in oil. One of the large ring manufacturer say lube with wd-40.
Perfection. I watch this video over and over, a few months apart.... it's mesmerizing.
These guys are awesome to work with. I had a plastic composite intake manifold cleaned by them and they got it done fast.
Very well done and I can see your equipment is really up to speed...very few shops have crank grinding machinery.....I was however rather surprised you are using flame to put press fit pins....sunnen has a electric unit that is superb and used correctly with their timers I have never discolored one...I enjoyed your video
I knew if I watched it long enough I'd see Timmy man we're getting old how long you been there now dude 40 years
Nice vid, cool guys there. I talked with one guy for 45 minutes just asking questions and he was very helpful. I give them a 👍 on customer service. I haven't yet had the work done yet but the prices are very fair and comparable to others.
Are they closed permanently?
Awesome video and music! Pros all the way!
the whole rebuild is awesome. nice work you are doing there. what is the name of the audio track ?
Need more true workers like you guys in america today. wish i could work there..
Would love to see one just on crankshaft balancing, how you go about deciding where to drill to balance it, all in all great filming.
Nice video! Thanks for sharing.
This is what experts are. cool. thanks for the clip.
sir I would like to know if gm 4.3 liter heads, casting number 14099064 with the eyebrows will work on an engine with the TBI intake set up.. the 4.3 engines are very confusing from so many changes over the years.. I have a 93 block. I have read that the 14099064 heads were an improved flow head, designed to be used with the CPI fuel injection system. I also read that some of these heads were used in the higher output K series and W series engines with the TBI set up.. I dont want to waste a set of head gaskets if these heads will not work with my TBI intake set up.. thanks
Cool video.
Great video. Gonna call about my Ranger.
Is the sound track by Art of Noise?
where did you balance the con rods and pistons ???
Good Production Line Visual Video. Shows Customers ,or to be Customers as Myself What Quality, Craftmanship,and Pride is Put into Your Motors. Looking Forward to Have Your Shop Rebuild my Chevy 4.3 Vortec. Daryl M UA.32 Journeyman Plumber
Magnifique 💪♥️
nice music, who is it?
so how much for the rebuild total? thanks for the vid
Super interesting
i wonder do that handle foreign engines or just domestic engines?
i like assembling on a bench much better also. No stress on the block.
Just hollern from Olympia!!!!
I'm looking for so,e shop,help/ apprentice machinists did you know of any in Thurston/Pierce county area?
What is the this video music name ?
Shouldn’t you guys use a torque plate?
You have dream job.
Hello friend , you know some used machine to camshaft grinder machine than is for sale, i am from ECUADOR
Is this shop still in business? The website no longer works.
Miss the soothing clank of metal on metal - had to run.
That was his dream! :3
how rebuilds should be done
music is fuckin awesome
"We just did the works, runs OK"
Dang. I wish ya'll were on the east coast.
Why did you use ketchup on the rod bearings?
I don't trust baking to get clumpy rust out of the water jacket - needs hot tanking
plz Music
I live right there I'm going in and buy a 4.3
Looks like they closed up shop.😕
Can't find a listing for them online.
I’m finally ready to send in my engine and just read they are closed permanently. Suggestions?
No torque plate when honing?
wil8115 what’s for?
so it's practically a brand new engine right, or really close to one ?
better than new
Tony 282
if held to closer tolerances than factory spec ?
Tony 282 nothing is better than new
E Chew - my brother rebuilt my mother's Ford straight six. There was a transverse groove across all the main bearing journals - it seems that someone in the factory dropped the crank during assembly and didn't bother to pull a fresh one. Yes, there are things better than new, depending on who built it.
no safety glasses while grinding?
Big deal its not your eyes
sweet thanks
this music sounds like it should be played to fur seal beatings or chemicals being dumped into the ocean
Just turn it off!
finally something professional from america
marvelous2575 You're talking about the only country who ever put a man on the moon.
idlehands333 Hell, Some European country would have beat us to it but they all went to the metric system.
Wow if I had to get all that machine work done on a 350, I’d keep buying blocks till I got one that didn’t need all that. Holy crap.
No machining done behind the shade tree? lol.
You’d end up spending more buying a bunch than machining it lol
J&D Shade Tree professional builders do the same block machining to brand new blocks to be certain of dimensions. That’s why most dart books have to be finish honed. You can put it together “good enough to run” or make it as dimensionally perfect as possible so it makes peak power for a longer life.
@@thehappytexan I call that peeing on trees. Self appointed experts take a finished product and usually screw it up thinking they know better than the manufacture. They have to mark there territory.
(Ps dart blocks need to be finished honed intentionally so a real pro can fit it to the pistons and use the finish appropriate to the rings there using) Not due to poor manufacturing.
This is awesome wouldn't mind working on car engines and get paid for it shoot
Did he just side cut the rods on the crank grinder wheel? !!!
That's an old inaccurate way to cut valve seats.
Cheap cast guides beat in with a hammer?
Its a production shop. Do it fast, get it out the door, and hope it lasts. They'd never do work on any of my stuff.
Ok 10 minutes of that same song is a lot....
Yeah, song goes on a while !
The music is ear torture !
Not looking to listen to crappy music.
Я такого колхоза не видал. по блоку полбеды - тупой резец. но коленчатый фал в патроне!, а не в центрах, дальше смотреть не стал
Vitaliy Mussonic с нетерпением жду видео сборки КамАЗовских( это лучшее совочное гавно от всех других наборов спиздженого забугорного Лего). Ибо по твоему шпильки кувалдой вот это хардкор, а где люди с толком все делают( хоть и по старинке без компьютерных станков) это колхоз. Эти моторы выхаживают по 200 тыс. МИЛЬ, похвались и ты тем же.
Great work lose the church music
What a way to curse your own business. This macabre funeral graveyard music with a child talking in the background from the dark minded musician who wrote it to the machine shop owner who chose it. Hear the words of the Lord, "Both Death and Life are in the power of the tongue and those who love it will eat of it's fruit." Don't think I'll be doing any business any time soon. I'll probably go to BG.
what is the this video music name ???