Dude seeing this install makes me want to get one of these on my car, and I will, YOUR THE MAN, thanks for stopping by my channel always good to hear from you.🤝
Thank you very much sir! That's awesome, I owned a 2009 RT for about 4 years and it had heads and cam done, it was a lot of fun I miss that car! You got anything done to it?
Probably this same exact one that I just bought. I've seen a lot of people throwing this one onto the RT as well because I believe the RT TB is 80 as well stock. Hit up Jay Greene he'll tell you which one. These fastmans flow great.
Thaks buddy! Once I throw the tune on I'll definitely let you guys know what's up. So far I have noticed a decent difference in throttle response, going to get a tune later today.
The hellcat TB is too large according to Jay for my setup. Larger doesnt always mean its it's better especially for a NA motor. There is a point where it's too big. If I had more mods on my car it might be worth it.
Yeah I think I saw that on Jay's page that's insane man! You are running headers right with a 100 octane tune? High flow cats too with a little weigh reduction?
Fastman uses a stock tb to start so if your electronics are bad on the tb you can swap the electronics from your stock tb to the fastman. Apparently some come dead on arrival feom what he told me.
love you're video's man but I have to say give that engine a bath !!! lol I can't help it I'm just a fanatic about a clean car in every nook and cranny lol no disrespect. lol
Lol I actually take really good care of my car this was one of the video where I opened up the engine coveres and noticed it was really dirty. I usually have my car spotless from inside out always. After this video I cleaned it out.
Lol because that's way too big.. bigger isnt always better. It eventually gets too big especially depending on what your other mods are and the fact these are NA motors. People think the 85 and 87 ported are the best but this 84mm outflows both of them because of the half shaft mod and the fact that its fully borred out instead of half of it borred. You need to understand how these fastman ones are designed
![Installing The Fastman 84mm Throttle Body [ Amazing Results! ]](http://i.ytimg.com/vi/pjbVDsNGwmg/mqdefault.jpg)
Make sure you guys check out the dyno video! We made 8 wheel horsepower and 20 wheel torque! Next will be upgrading the intake manifold.🙌👊
Got my 85mm Bloxx throttlebody plus tune on my scat. A completely different car. Got 520 HP and 702Nm torque. Amasing car 👍💪
I'm glad you showed the stock TB next to the Fastman. What a difference! That fastman looks like a work of art!
No problem sir, thank you for stopping by the channel 🙌👊
Dude seeing this install makes me want to get one of these on my car, and I will, YOUR THE MAN, thanks for stopping by my channel always good to hear from you.🤝
Thanks buddy I appreciate that! No problem man, keep grinding and pushing out videos, I'm here with you.👍👊
Dude love the content and seeing all the mods on your scat! Makes me want to do the same mods for mine!
Thanks a lot man! I appreciate your support on the channel, it really means a lot!🙌👊
How big is the actual hole on the intake manifold?
Hey man post a picture on your channel of your dyno sheet before and after the jay green tune! I want to see the torque curve!
Okay give me some time and I will
You got a new sub I have a 06 rt I wish it had more power
Thank you very much sir! That's awesome, I owned a 2009 RT for about 4 years and it had heads and cam done, it was a lot of fun I miss that car! You got anything done to it?
@@landoninahellcat8745 just CAI.. straight pipe my next thing I want ..to do is get the pedal Commander soon
Chris C dont waste you time with the pedal commander go get a set of headers and get a tune.
so is that OD the same as the stock one? Seems your intake tubes all fit back on right?
It looks quite a bit larger honestly, but yes all the intake tubes fit right back on, correct.👍👊
What throttle body size is good for a 93 octane tuned challenger r/t?
Probably this same exact one that I just bought. I've seen a lot of people throwing this one onto the RT as well because I believe the RT TB is 80 as well stock. Hit up Jay Greene he'll tell you which one. These fastmans flow great.
Did you have to tune it or you can throw it on stock?
Hey do you know if he’s up and running again? I keep coming back to click the link but still got the same message.
damn.. that looks good!Could you tell a difference in the two or hp!? Where did it help you out the most.. down low or up high!? 🤝🇺🇸
Thaks buddy! Once I throw the tune on I'll definitely let you guys know what's up. So far I have noticed a decent difference in throttle response, going to get a tune later today.
Where can I order that at
Hey man! Please subscribe and check out the dyno video. You can order it at thefastman.com
Where did You order the throttle body from?
Says in the description of the video
Is that the Trinity t1 tuner
Yes haha sorry misread your comment. Yes, Has been working just fine for me?
@@landoninahellcat8745 cool did it come with your unlock pcm or did you send pcm and who does unlock pcm's for the 15 and up model chargers etc
No, you have to buy the unlocked PCM you can buy bundles offline that come with the device and the new pcm
@@landoninahellcat8745 ok great thanks brother nice videos
No problem!
You may have said it in the video but how much did this cost?
I believe 220. You can check on thefastman.com
Gorgeous Scat392 he’s not selling right now Is why I ask.
It’s about $430 for a new TB plus modifications
Any update on the website?
It's in the description. Thefastman.com
I went to check it out but the guys not taking orders :(
Thats too bad man, check out the dyno video too!👍
I put the 87mm on mine and no codes
Surprised you didn’t do a Hellcat tb
The hellcat TB is too large according to Jay for my setup. Larger doesnt always mean its it's better especially for a NA motor. There is a point where it's too big. If I had more mods on my car it might be worth it.
Gorgeous_Scat392 went 11.16@122 last night with my 392 charger wish you would take yours to the track
Yeah I think I saw that on Jay's page that's insane man! You are running headers right with a 100 octane tune? High flow cats too with a little weigh reduction?
Gorgeous_Scat392 that’s me ya high flow cats may take them off and see if that gains me any
Probably would gain a little if you removed them. Great time though. Basically into 10s with full bolt on and tuned on 100!
Fastman uses a stock tb to start so if your electronics are bad on the tb you can swap the electronics from your stock tb to the fastman. Apparently some come dead on arrival feom what he told me.
Sheesh nice dude
Thanks man!🤙👊
I’ll buy your fastman throttle body now that you are getting a hellcat. Let me know thanks.
Cool hat
Haha thanks man!👍
@@landoninahellcat8745 Right On! Brotha!
✌🏼
Thanks for stopping by man.👍
Im gonna do it
love you're video's man but I have to say give that engine a bath !!! lol I can't help it I'm just a fanatic about a clean car in every nook and cranny lol no disrespect. lol
Lol I actually take really good care of my car this was one of the video where I opened up the engine coveres and noticed it was really dirty. I usually have my car spotless from inside out always. After this video I cleaned it out.
4:29-4:33
84 that’s it I have a 90 on my 5.7
This will flow like an 88 my tuner says. This is supposed to be one of the best ones to buy for my application, wait till we dyno it.
Gorgeous_Scat392 why not say fuck it and put a 94
Lol because that's way too big.. bigger isnt always better. It eventually gets too big especially depending on what your other mods are and the fact these are NA motors. People think the 85 and 87 ported are the best but this 84mm outflows both of them because of the half shaft mod and the fact that its fully borred out instead of half of it borred. You need to understand how these fastman ones are designed
Gorgeous_Scat392 walking slow packs 😎
Lmao you 5 7 guys are ridiculous
Been lookin into this for a while might go ahead and pull trigger you should also put link in video
Yeah man I think this is definitely the one to buy from all the research I have done. Yeah, thanks for the reminder I'll do that!