Kentucky Electrician here-- grounding the steel is not necessarily required by code, but I would highly recommend it. Grounding the frame would simply mean that if a hot wire ever touched that metal frame, it would immediately trip the breaker by passing a lot of current from your breaker, into the bench, through the ground wire, and back to your transformer. If the frame is not grounded, it will turn the entire frame into an extension of the hot wire that is touching it. The current would probably tunnel its way through the metal into the concrete, to the Ufer ground/ground rod/water ground, and finally back to your transformer-- this leaked current would likely be very low, and ultimately insufficient to trip the breaker that is making your bench hot, leaving it as a potential death trap for the next person to touch the bench while wearing muddy boots. Beautiful build as always, hope this finds you well.
If you were to fasten metal boxes apposed to the plastic, would that not ground everything? Box is required to be grounded, which is bonded to the metal.
@@mandeladams4793 That should be fine, but technically, grounding/bonding screws are listed for their purpose-- we use a green screw or a screw that has a ground label near it, to show that it is not meant for structural integrity but electrical safety. If I were doing the project at my own home, I would totally trust the weld that held the box, or the screws that held the box to the frame, but if I were going to be legally liable for any future failures, I would specifically put a bond jumper between the box and frame, or from the frame to the ground joint in the box.
European here. We've always ground all the stainless steel kitchen or metal science type benches we've had installed. EU requirement. Any metal surface is to be ground. Kinda like you ground the metal portions of a light fixture. Same logic. Given that cords will touch metal surfaces, it's a no brainer, really.
Thank you, i’ve really appreciated people still watching despite my long absences! I’ve been making family time a priority these last couple years, but still love working on projects and videos when I can.
@@rainfallprojects501 When I first started watching you, I had yet to start my family. Now I've got two kids; stumbling across a new post from you is like seeing a college friend at the grocery store. Everyone's priorities have changed now, but we are still so happy to see each other for the limited time we have.
I’ve seen them all. I’ll wait as long as it takes between videos. Having a toddler of my own now (didn’t when I started watching your videos) I can only imagine how difficult it is for you to film/edit these, the family and the farm. These videos are a treat worth waiting for.
I completely agree. Long absences from YT and still in less than 8hrs he’s got over 10k views. Love the content and the editing. Thanks for sharing and huge respect for keeping family a priority!
The channel may not grow as fast without weekly content, but who cares? Quality is always better than quantity; I know I'll be here whenever the next one drops! Looking forward to part two!
I know this is a little dark, but in February 2017, my sister took her life, leaving me in a storm of anxiety. Luckily I had just discovered your channel and in the weeks following, I binged all your videos, soothing and stabilizing my mind. It was just the hold-over that I had needed. I always smile when I see you’ve posted. Thank you.
I lost my son a day after his 21 birthday I know the feeling of hurt just take it a day at a time in my world i try to smile for my other kids but that even hurts but keep your head up and think of all the good times you had with her God bless
There is nothing better than opening TH-cam and seeing a new rainfall projects video on the homepage. Thanks for still making videos when you can! Ill never stop watching!
I was watching a movie when the notification popped up... immediately switched to watching this!! A real treat to have a new video! Great to see you back 🥳
This definitely changed my view of how I'm going to build my work bench for my new shop. I don't have any companies local to me to do that big of powder coating so I'll just sand it smooth and paint it black. Thanks for the inspiration!
I ABSOLUTELY enjoy all your videos, this one was a real treat to find as a new posting. Thanks! You are a real craftsman, a supper inspiration. Thanks ! more more more.
Well, you have raised the bar and totally inspired me to change direction on my wood miter saw / work bench for my new wood shop build. I am for most a steel fabricator and seeing you tie steel frame work into a wood bench set with me 100%. You did an outstanding job on this project and I give you a solid score of 10 out of 10 on it. I am jealous of your dynamite drawer fronts as that adds something very special to the finished product for sure. The timing of seeing your videos and my shop build is perfect as I usually find inspiring ideas after I’ve completed my projects. I’m going to be up front and tell you that I’m going to borrow the main premises of your build into mine as well. I was actually eyeballing a Milwaukee tamale cart tool box (wide low profile tool box) before I saw your videos and now I know exactly where I’m going to install it. Anyway, keep up the great work that you do and know that it inspires other people out there as well.
I wanted to comment to help you in the algorithm. Your channel is one of my favorites. The videos are always well constructed, clear, calm and direct. You speak well and you care for the work at hand. Thank you for creating this content and taking us along for your rainy day fun.
Perfect. I’m planning an outdoor kitchen with some fir I milled. I’ve done a few things with iron framing and wood but this gives me some helpful tips. You have spurred me on! BTW I love your practical, I’m-not-a-know-it-all approach.
I love your projects; they are extremely well thought out. The plywood looks amazing and works very well inside the frame with those tabs. Your projects inspire me to get out in the shop!
Very cool how this is a piece that will be here and the next few generations will be telling their friends. "My great uncle built this when he was my age".
@3:30, you talk about keeping your frames straight and at the same time you start welding that inside corner. :) Inside corners pull the hardest when welding, don’t weld them. Or if you really want to, weld them at last, not at first. Always a pleasure to watch another video from you btw!
@@jonanderson5137 Here in Finland, all new installations are required to have a GFCI/RCD (since 2008, so for a while now). It used to be mandatory only in bathrooms/kitchens/outdoors, but now it's required for everything. And here it has always been installed in the electrical cabinet, and not in the outlet, like I believe it is in the US (at least that's what I've seen in some videos).
@@jonanderson5137 of course it makes it safer. Whenever any live wire touches a grounded frame, the breaker will trip. Even if you dont have an RCD. even worse if the frame is not grounded, it could be life and you're electrocuted whenever you touch it. all it needs is some bad insulation on a tool
@@SamiKankaristo we have both styles, outlets and breakers. Most people prefer to have the outlet perform as the GFI because it's closer to reset. Some motor setups won't work with GFI protection, fans and refrigerators that I've installed that have paperwork explicitly saying so.
Congratulations on the video, the project was excellent. I've missed your videos, you haven't posted a new one for a long time. Congratulations on your work and put up more videos, there's a need for good content.
Great craftsmanship as always! Fair play to you still managing to make a video with I'm sure a very busy life! Looking forward to the next part. From one of your Irish fans 🇮🇪
Always great to see that you've posted! Your projects, always one off! I rarely comment on procedure or method, conduit and THHN wire would have been another way to handle your electrical, I would bond the frame. Waiting for part 2.
Hope you’ve had a great year! Always love seeing what you’ve been working on. Fun fact: the outro music you use is one of the tracks Ryanair plays when you board their planes. Always makes me think of you!
Amazing build. I think you will be able to use the workbench as a tornado shelter if need be! It looks mighty strong form where I sit. Always love to see how you approach your projects. Thanks.
THE MAN IS BACK!!!!! By the way, I've still got the metal/barn wood art, which you made for me 8 years ago, up on the wall. Will last forever I'm sure.
Man, the algorithm is working!! I’ve been thinking how there was no recent video’s from Rainfall Projects and I’m driving through Oregon on an RV trip. I have it in my head that you live somewhere in Oregon and thought how cool it would be to meet the man himself. Your videos were a real source of comfort for me while I was going through my chemotherapy and I missed watching your videos. I thought to look at your channel this morning here in Coos Bay and lo and behold!?!? You dropped a video three hours ago! Score! Thanks for making more content and I hope this continues. Excellent work too! Cheers!!
It's like a new Coppola movie, you never know when it's going to come out, it might take a long time, but when it comes out you'll watch it right away.
Always like your projects and videos. Sure wish they came more often. But I’m sure it’s not easy for a farmer to find time to make metal working videos.
Awesome build, you have an amazing barn. I hope to one day have my own workspace like that. One awesome tool I think you would find handy is switch on/off magnets. The company "magswitch" makes super high quality and strength ones that I use all the time. Thay make welding tabs and all sort of joints way easier. Complete game changer for me
Excellent, as always, another great video. It seems silly that a grown man gets excited when you put out more content...lol but I do. Please keep them coming.
6:20 I do the same thing, but I do most of my layout with a scratch awl. This lets me put the tip in my first line, and index the speed square against the awl when I flip it to the next side, making the layout lines much more accurate; then I can cut close to the line and clean up to it with a grinder, as I don’t have a horizontal band saw, so *super precise* cuts are outside my tool kit capability at the moment.
It's good to see you back in the Lab again... I'm subbed, but somehow I almost overlooked this video.. Sure glad I didn't.. Well R.P. you have a good one my friend and God Bless you and your family... P.S. That workbench is looking very nice...
Just went back and watched your shop tour where you mentioned you wanted to build this three years ago now! Crazy how time flies. can't wait to see how it turns out.
Kentucky Electrician here-- grounding the steel is not necessarily required by code, but I would highly recommend it. Grounding the frame would simply mean that if a hot wire ever touched that metal frame, it would immediately trip the breaker by passing a lot of current from your breaker, into the bench, through the ground wire, and back to your transformer. If the frame is not grounded, it will turn the entire frame into an extension of the hot wire that is touching it. The current would probably tunnel its way through the metal into the concrete, to the Ufer ground/ground rod/water ground, and finally back to your transformer-- this leaked current would likely be very low, and ultimately insufficient to trip the breaker that is making your bench hot, leaving it as a potential death trap for the next person to touch the bench while wearing muddy boots. Beautiful build as always, hope this finds you well.
Very well explained.
I would only ground the frame if I had a GFCI on the outlets. The grounded frame makes a good ground even through a person.
If you were to fasten metal boxes apposed to the plastic, would that not ground everything? Box is required to be grounded, which is bonded to the metal.
@@mandeladams4793 That should be fine, but technically, grounding/bonding screws are listed for their purpose-- we use a green screw or a screw that has a ground label near it, to show that it is not meant for structural integrity but electrical safety. If I were doing the project at my own home, I would totally trust the weld that held the box, or the screws that held the box to the frame, but if I were going to be legally liable for any future failures, I would specifically put a bond jumper between the box and frame, or from the frame to the ground joint in the box.
European here. We've always ground all the stainless steel kitchen or metal science type benches we've had installed. EU requirement. Any metal surface is to be ground. Kinda like you ground the metal portions of a light fixture. Same logic. Given that cords will touch metal surfaces, it's a no brainer, really.
This channel is special, it’s always like a treat and a surprise when you post, you do great work
Thank you, i’ve really appreciated people still watching despite my long absences! I’ve been making family time a priority these last couple years, but still love working on projects and videos when I can.
@@rainfallprojects501 When I first started watching you, I had yet to start my family. Now I've got two kids; stumbling across a new post from you is like seeing a college friend at the grocery store. Everyone's priorities have changed now, but we are still so happy to see each other for the limited time we have.
I’ve seen them all. I’ll wait as long as it takes between videos. Having a toddler of my own now (didn’t when I started watching your videos) I can only imagine how difficult it is for you to film/edit these, the family and the farm. These videos are a treat worth waiting for.
I completely agree. Long absences from YT and still in less than 8hrs he’s got over 10k views. Love the content and the editing. Thanks for sharing and huge respect for keeping family a priority!
The channel may not grow as fast without weekly content, but who cares? Quality is always better than quantity; I know I'll be here whenever the next one drops!
Looking forward to part two!
I know this is a little dark, but in February 2017, my sister took her life, leaving me in a storm of anxiety. Luckily I had just discovered your channel and in the weeks following, I binged all your videos, soothing and stabilizing my mind. It was just the hold-over that I had needed. I always smile when I see you’ve posted. Thank you.
Sorry for your loss. I hope your sister has found peace
I'm so sorry for your loss :( I hope your sister is in a better place
I lost my son a day after his 21 birthday I know the feeling of hurt just take it a day at a time in my world i try to smile for my other kids but that even hurts but keep your head up and think of all the good times you had with her God bless
There is nothing better than opening TH-cam and seeing a new rainfall projects video on the homepage. Thanks for still making videos when you can! Ill never stop watching!
I was watching a movie when the notification popped up... immediately switched to watching this!! A real treat to have a new video! Great to see you back 🥳
The "Best on the Internet" returns. Fantastic.
I always get excited when a new Rainfall video pops up, it’s one of my favorite channels.
You are a Gifted Engineer, Craftsman, Farmer, Welder, and 100 other things. Bravo!
As others have written, what a nice treat to watch a new rainfall vid..
Great question. Yea I would ground the metal frame. I've been doing electrical for 44 years at this point. Love your videos!
I love everything about this channel
Now that's a work bench! Glad you see you're well.
I havent seen a post from you in forever. What an awesome project. Good to see you brother
ONE of the few creators whose videos I watch in full screen. Welcome back!
Oh man, nice to see another video from you! 😎
After watching this I realized that I need to up my game!! Very Nice! Glad I found your channel!
This definitely changed my view of how I'm going to build my work bench for my new shop. I don't have any companies local to me to do that big of powder coating so I'll just sand it smooth and paint it black. Thanks for the inspiration!
Felt so good seeing both you and Drake again.
I ABSOLUTELY enjoy all your videos, this one was a real treat to find as a new posting. Thanks! You are a real craftsman, a supper inspiration. Thanks ! more more more.
Love your channel. I’m a big fan of your rainfall projects.
Well, you have raised the bar and totally inspired me to change direction on my wood miter saw / work bench for my new wood shop build. I am for most a steel fabricator and seeing you tie steel frame work into a wood bench set with me 100%. You did an outstanding job on this project and I give you a solid score of 10 out of 10 on it. I am jealous of your dynamite drawer fronts as that adds something very special to the finished product for sure. The timing of seeing your videos and my shop build is perfect as I usually find inspiring ideas after I’ve completed my projects. I’m going to be up front and tell you that I’m going to borrow the main premises of your build into mine as well. I was actually eyeballing a Milwaukee tamale cart tool box (wide low profile tool box) before I saw your videos and now I know exactly where I’m going to install it. Anyway, keep up the great work that you do and know that it inspires other people out there as well.
Whoa...this is unexpected, in all the best ways. Hello, welcome back
I’m here because of the Ring Roller video for the Marble Machine X years ago. Always excited to see a new episode. Please keep em coming.
I wanted to comment to help you in the algorithm. Your channel is one of my favorites. The videos are always well constructed, clear, calm and direct. You speak well and you care for the work at hand. Thank you for creating this content and taking us along for your rainy day fun.
I figured you got too busy with life, good to see you back
What a relief and a treat!
I think I'll circle back to the start and re-watch everything after this.
This channel is such a gem.
I cant tell you how much i love your channel and all your videos.
YOU’RE BACK!!!!!!!!!!
Great video as always. Really enjoyed watching you at work again. Thank you JD!
Good.to have u back
Always a pleasure to watch your videos mate! Thank you and congrats, it looks great!
I love how you added the brace to the bottom foot mounts. That one extra step is perfect!
duuuuude - welcome back!! 🙂
Good to see you back and your daughter is adorable.
Your videos are the very best on You Tube, thank you for sharing!
That is going to be one stout workbench! Looking forward to seeing the completed product.
It must be fall again, time for more great projects 😂🍁 This bench looks like it is going to be incredible.
I will watch anytime you post - no matter how long between posts!
This is perfect timing. I just finished my shop office and am moving on to my workbench as well!
Love how so many of your projects are things like this that people will use decades from now
Yes, new video finally. You are my absolute favorite TH-camr. I hope you upload more projects soon 👌🏻
Man what a treat! got super excited to see this pop up today!
I love this channel. Always sweet amazing work and that bench is so cool.
Perfect. I’m planning an outdoor kitchen with some fir I milled. I’ve done a few things with iron framing and wood but this gives me some helpful tips. You have spurred me on! BTW I love your practical, I’m-not-a-know-it-all approach.
Great to have you back!! Love your videos. I have the same welder so thank you for the settings hack.
I love your projects; they are extremely well thought out. The plywood looks amazing and works very well inside the frame with those tabs. Your projects inspire me to get out in the shop!
Glad you are back. Hope more videos are coming and more frequently. Love the content
That's a really nice workbench you're building. Thanks for sharing this project with us and for the calm and inspiring videos you offer
Wow, absolutely beautiful! So nice to see a video of yours again!!!
Great to see a new video from you. That workbench is going to be awesome.
Very cool how this is a piece that will be here and the next few generations will be telling their friends.
"My great uncle built this when he was my age".
Oh how I have missed your videos. So relaxing and functional. You really should start making more, would love to see more of the farm videos too.
@3:30, you talk about keeping your frames straight and at the same time you start welding that inside corner. :) Inside corners pull the hardest when welding, don’t weld them. Or if you really want to, weld them at last, not at first. Always a pleasure to watch another video from you btw!
Easily my favourite youtube channel. Love your work mate
Quality ... Very Nice ... Cant Wait to see It Finished ... Nice To See An Other Beauitful Project And Video from You Chap ...
peace
Good to see ya back!! Always been one of my favorite channels.
One solid work bench! Glad to see another video pop up it’s always a good watch 👌🏻
In the UK, I think we'd have to ground something like that. If it's easy enough to do, it would make it safer for you. Great stuff, as always!
It doesn't make it safer.
The only time it does is IF the power is running through a GFCI or I think you guys call them RCDs
@@jonanderson5137 Here in Finland, all new installations are required to have a GFCI/RCD (since 2008, so for a while now). It used to be mandatory only in bathrooms/kitchens/outdoors, but now it's required for everything. And here it has always been installed in the electrical cabinet, and not in the outlet, like I believe it is in the US (at least that's what I've seen in some videos).
@@jonanderson5137 of course it makes it safer. Whenever any live wire touches a grounded frame, the breaker will trip. Even if you dont have an RCD. even worse if the frame is not grounded, it could be life and you're electrocuted whenever you touch it. all it needs is some bad insulation on a tool
@@Horstelin the live wire won't shock you unless you're grounded. This is basic, day one, electrical knowledge.
@@SamiKankaristo we have both styles, outlets and breakers. Most people prefer to have the outlet perform as the GFI because it's closer to reset.
Some motor setups won't work with GFI protection, fans and refrigerators that I've installed that have paperwork explicitly saying so.
Always stoked to see your videos pop up!
Looking very cool. A robust bench if I've ever seen one!
Good to have you back. Great video as usual.
Looks good. Looking forward to the finished product.
I always enjoy your content, keep it coming!
Literally out of the blue a day ago I started thinking man. rainfall projects hasnt posted in a while ago. So glad to see a new one!
Congratulations on the video, the project was excellent. I've missed your videos, you haven't posted a new one for a long time. Congratulations on your work and put up more videos, there's a need for good content.
And another yes to grounding the table. Florida Electrician here as well. It is always a good practice to ground your Metal tables.
Posting a vid after 6 months, just dropped everything to watch it, missed you!
Amazing! Love your videos!
YASSSS NEW VID AT LAST! glad you're alive!!!
Just came across your channel with this video and subscribed. Really like your presentation, not to mention your skills. From the UK.
Look freakin awesome already, can't wait for the next video.
Love those semi-annual videos!
Looks great so far!
Great craftsmanship as always! Fair play to you still managing to make a video with I'm sure a very busy life! Looking forward to the next part. From one of your Irish fans 🇮🇪
Definitely ground the frame! So great to see an upload from you - hope you're really well :)
Really nice :) like how your so calm
Always great to see that you've posted! Your projects, always one off! I rarely comment on procedure or method, conduit and THHN wire would have been another way to handle your electrical, I would bond the frame. Waiting for part 2.
Got to be one of the best channels on here
so greatful to see another upload from you
Hope you’ve had a great year! Always love seeing what you’ve been working on.
Fun fact: the outro music you use is one of the tracks Ryanair plays when you board their planes. Always makes me think of you!
Amazing build. I think you will be able to use the workbench as a tornado shelter if need be! It looks mighty strong form where I sit. Always love to see how you approach your projects. Thanks.
THE MAN IS BACK!!!!! By the way, I've still got the metal/barn wood art, which you made for me 8 years ago, up on the wall. Will last forever I'm sure.
Finaly a new Video. missed your vids
Man, the algorithm is working!! I’ve been thinking how there was no recent video’s from Rainfall Projects and I’m driving through Oregon on an RV trip. I have it in my head that you live somewhere in Oregon and thought how cool it would be to meet the man himself. Your videos were a real source of comfort for me while I was going through my chemotherapy and I missed watching your videos. I thought to look at your channel this morning here in Coos Bay and lo and behold!?!? You dropped a video three hours ago! Score! Thanks for making more content and I hope this continues. Excellent work too! Cheers!!
Haven't been this excited for a TH-cam upload in a long while! Keep it up:)
It's like a new Coppola movie, you never know when it's going to come out, it might take a long time, but when it comes out you'll watch it right away.
Always like your projects and videos. Sure wish they came more often. But I’m sure it’s not easy for a farmer to find time to make metal working videos.
Love your work. Thank you.
So good to see you posting another video. And Drake too.
OMG absolutely awesome 👍🏼👍🏼
Awesome build, you have an amazing barn. I hope to one day have my own workspace like that.
One awesome tool I think you would find handy is switch on/off magnets. The company "magswitch" makes super high quality and strength ones that I use all the time. Thay make welding tabs and all sort of joints way easier. Complete game changer for me
Your workbench looks better than my kitchen!
Nice work. REALLY great to see you back. Hope you all are doing well.
Excellent, as always, another great video. It seems silly that a grown man gets excited when you put out more content...lol but I do. Please keep them coming.
6:20 I do the same thing, but I do most of my layout with a scratch awl. This lets me put the tip in my first line, and index the speed square against the awl when I flip it to the next side, making the layout lines much more accurate; then I can cut close to the line and clean up to it with a grinder, as I don’t have a horizontal band saw, so *super precise* cuts are outside my tool kit capability at the moment.
Enjoy all you projects. Might look into some Fireball tools welding jigs, I believe you would find them useful.
Приветствую!
Наконец то новое видео!🙂👍
Думаю получится отличный верстак!🙂👍👍👍
Жду продолжения!
Awesome bench!!
It's good to see you back in the Lab again... I'm subbed, but somehow I almost overlooked this video.. Sure glad I didn't.. Well R.P. you have a good one my friend and God Bless you and your family... P.S. That workbench is looking very nice...
Just went back and watched your shop tour where you mentioned you wanted to build this three years ago now! Crazy how time flies. can't wait to see how it turns out.