Here is a PDF of the schematic. D1 can be replaced with any red LED and green LED, and SW1 is only needed if you want the device to remember more than 1 code. Good luck! drive.google.com/file/d/1TCWMESWdjCFO011D86GwzY6jUe_c3Zst/view?usp=sharing
I quite literally am clueless of wha this is all about! However I am in separate need of assistance. If you respond to this I would be more then happy to get into contact with you and see if we can work something out like to buy one of these off of you? It would greatly help me and my girlfriend as we are down to only one key fob and our apartment expects us to spend a ridiculous amount of money for a replacement. Please I loved how educating this was but please help!!
Ok, I want to build this....and I’m a total newb. So as far as the nano.....are they all the same. You mention the serial console, is that just the program that resides on the computer that can read and store the nanos I button serial number? Is the console included in the links you provided.
Sorry I accidentally hit send button as I wasn’t done asking questions. Also, the console seems to be able to read the saved I button code, but can you also write your own unique 64 bit code (hex format I presume) to an rw1990 Ibutton? I’m hoping so, cause I would need it to do that. Seems you can since it seems the console can retrieve codes to the computer and save numerous ones to memory. Are all the rw1990 ibuttons the same? So, to sum it up....I need a arduino nano, I need to upload the program from your links, then breadboard as you have with leds buttons power etc. then load console onto a computer and use nanos usb connection to save ibutton data into console on computer.....is that the general gist of what needs to be done. Let me know if I’m on the right track? Thx for your work on this.
hey really cool project, how about giving some more information on how to do it on a breadboard? BOW and stuff, I would like to play/experiment with it and then have a pcb out of it. Again really cool project :D
Hi ella, I cant find any schematics attached to any sketches.
It may be me being stupid :D could you help please?
kind regards,
Dave
Here is a PDF of the schematic. D1 can be replaced with any red LED and green LED, and SW1 is only needed if you want the device to remember more than 1 code. Good luck!
drive.google.com/file/d/1TCWMESWdjCFO011D86GwzY6jUe_c3Zst/view?usp=sharing
Your board looks like it’s missing the D8 pin to Ibutton center pin, or am I missing something here?
I quite literally am clueless of wha this is all about! However I am in separate need of assistance. If you respond to this I would be more then happy to get into contact with you and see if we can work something out like to buy one of these off of you? It would greatly help me and my girlfriend as we are down to only one key fob and our apartment expects us to spend a ridiculous amount of money for a replacement. Please I loved how educating this was but please help!!
Ok, I want to build this....and I’m a total newb. So as far as the nano.....are they all the same. You mention the serial console, is that just the program that resides on the computer that can read and store the nanos I button serial number? Is the console included in the links you provided.
Sorry I accidentally hit send button as I wasn’t done asking questions. Also, the console seems to be able to read the saved I button code, but can you also write your own unique 64 bit code (hex format I presume) to an rw1990 Ibutton? I’m hoping so, cause I would need it to do that. Seems you can since it seems the console can retrieve codes to the computer and save numerous ones to memory. Are all the rw1990 ibuttons the same? So, to sum it up....I need a arduino nano, I need to upload the program from your links, then breadboard as you have with leds buttons power etc. then load console onto a computer and use nanos usb connection to save ibutton data into console on computer.....is that the general gist of what needs to be done. Let me know if I’m on the right track? Thx for your work on this.
Thanks Ella :)
Great Job
Is that an IBF-120?
I have ibutton ds1982, can this tool work for the ibutton type?
Thanks
hey really cool project, how about giving some more information on how to do it on a breadboard? BOW and stuff, I would like to play/experiment with it and then have a pcb out of it. Again really cool project :D
Did you check the links in the description? They have the schematic, PCB, BOM, and Arduino Code.
Good job!
Yo could I buy one of these?
Nice...working in Arduino UNO??
Hi,
Does it work with ds1961s?
hi are you found and cloner for it now ?
By that I mean the png file.
nice project !!! Q
The PCB url is not working. Are you able to make a couple already made?
Please explain how is the URL not working for you so I can fix it. It works for me.
It works apologies!
@@cheeks300zx No problem. :)
Is it possible to add a LCD display?