Engine Install and First Drive in my Single cab Pickup // VW T3 1.9 Diesel Conversion
ฝัง
- เผยแพร่เมื่อ 16 พ.ค. 2020
- Hey Guys! Welcome back! This week I'm going to finish the engine conversion on my 1984 VW Single Cab and take it for the first drive on some back roads. Thanks for following along!
- ยานยนต์และพาหนะ
![บุษบา - เมนทอล [Official MV]](http://i.ytimg.com/vi/IGnWPokSEis/mqdefault.jpg)
![เบิ้ล ปทุมราช - อ้ายกินดอง น้องลาบงัว ft. สแน็ก อัจฉรีย์ [OFFICIAL MV]](http://i.ytimg.com/vi/-OK--KaSPcI/mqdefault.jpg)
Great job Sebastian! There is nothing like having your own pickup truck :) and when you said that maybe one of us could help you wrestle the engine into position, I almost reached to the screen but then remembered about social distancing so... maybe on the next one hehe
Hahahahaha! Thanks man! I’m sure I will need your help in the future!
I’ve really enjoyed these videos. What we call in North America a “shade tree mechanic”...real people doing awesome work in the confines of their home or back yard, doing it with what you have...not a giant detached shop with tens of thousands of dollars of tools! You’ve inspired me I have three AAZ non-running motors I’ve been trying to restore and have not worked on in a few months. I like how your videos aren’t boastful or self promoting. They are for like minded people who want to become more informed. I think you have done a fantastic job and I like how, for you, there are no “problems”....only solutions. Keep up the great work.
That was a good test drive, I felt as if I was there sitting in the passenger seat. I'm glad it started up right away.
Glad you enjoyed it 😊. Me too! It’s always scary to start an engine after it was disassembled.
I love that the European countries all have small vehicles. Here in the States, most are big and completely unnecessary fuel guzzlers. I have a Ford Ranger which is a relatively small truck. Not as small as your VW you have there, but I do love it. That used to be my primary vehicle, but a couple of years ago I purchased a 4-wheel drive Jeep Compass which is smaller than most SUVs we have here. It is actually smaller than my truck. I wish I was better with vehicles like yourself.
Great video Seb and nice one man job on this motor ! It's very nice to have you with us, explaining what's going on and how you struggle ;) Thank you !
Thanks Remy! It's nice to share my struggles with someone! ;)
Hey, Ollari`s again a great video, did enjoy it, Keep up the good work. greetings Hubertus.
Szép munka. Hihetetlen hogy ennyi mindenhez ilyen jól értesz.
Minden jót kívánok
Köszönöm szépen! 😊
Great job! Congrats!
Thanks Rob!
gooday mate, only just found you. an absolute gem you work with the same ethic as myself, exept im 70, and feeling it. do my own work on my t3 completly and need to thank you for your work. im a bit late but would willingly lend a hand mate when asked in sunny australia could be a problem too lol, stay well im now an avid follower. cheers, ray
super spannend😀✌️ toll was du alles erklährst
😊👊
Excellent work my friend :)
Thanks Craig!
well done !
Hello again, Great work, nice test drive, did enjoy the Tripp.greetings HCS
Haha! Thanks! Hopefully back on the road this summer! I miss driving it.
@@OllarisGarage Yes I do believe so.
hello great video can you tell me which engine did you put precisely because I have to change mine too?
Üdv!! Óriási lett a gép😉
Ugyan ezt a projektet csinálom, 1.6d ki, 1.9sdi be... Sokat segítettél ezzel a videóval 🙂
Szép munka!!
Hali! Köszi! Örülök hogy segíthettem! Mellékesen: nyugodtan rakj rá turbót. Megvan minden benne mint egy TDI ben.
Jó nekem a szívó, lakó autó lesz nem erőgép🙂
Ja! Azthittem platós! 😉
Nem nem, 82-es Hochdach
Lenne egy kérdésem. A vízcsöveket hogy kötötted be? Elvileg a vizpumpánál le kell dugozni az egyiket, hogy legyen fűtés... Ez igaz?
first video minute was pretty shaky.
I like your work,
nice that the flatbed drives again
Thanks! I'm happy too! I forgot to turn on the image stabilization on my camera probably.
Great job and really useful video. Can you help me out, what size bolts fit the engine bars to the body?
Thanks
Thanks! I don’t remember the lengths but those are M8 bolts.
Just found this, thanks a lot.
Is this 1.9D 47KW?
Hello!
Great job
Could you tell me type and model of engine? Looks like you didnt rebuild engine mounts, so new engine is fitted perfectly.
Sure! It’s an AEY enginecode Vw Caddy engine. With a Golf3 TD mechanical pump. Just look for my older videos.
This is the engine marked with the code AAZ right ?
Greetings from the UK, Sebastian. I was wondering which air filter housing you used please?
I’m using the 1.6d one.
Which engine code is this? How many kW?
Did you make your own motor mounts and oil pan? I'm installing a 1.9 Tdi in my '81 Westy.
No. You don’t have to if you had a diesel in it. And it also depends what TDI you put in it ( what the donor vehicle was)
Screw is not incorrect in that application: "The main difference between a bolt and a screw is that a typical screw can work on its own and a bolt requires a nut to secure it."
Exactly! That’s why I don’t get why I always say screw!
Anyhow, screw it! 😅
@@OllarisGarage You say screw because it's correct :-P