if the caps don't bite ya, the case will! I have never opened up one of those ps5 power supplies, but it looks like a real pain. Literally. Gj m8. Thanks for the vid
Yes, when the drive is not connected there isn't any action on the eject button. I just dislike when I get a proper boot sequence only to find there's no signal on the tv. Great job Toltec
1:16 keep looking at the top left of the towel you see something that looks like a roach or bed bug. Keep looking until the camera come back to the same spot and you see the bug is gone. And that’s how you bring bugs into your home.
just a question Im still self teaching myself alot about electronics repair. in this case when testing why did you put the red probe on ground instead of the black one? usually its reversed but im sure you had a reason for it. as always great fix love the videos i learn alot from you.
You can use diode mode however you like but having the positive probe on ground tends to give a reading more often than having the negative probe on ground. This is simply because of the way ICs are manufactured. If you use black probe on ground, quite often you just get OL reading. If you see diode readings listed online somewhere, the readings will normally be taken with red probe on ground.
@@MultiVoiceofreason Please dude, if you don't know the liquid metal density becomes like water at certain temperature, then you shouldn't give an opinion as if it's the revealed truth.
Hi, thanks for help us,respect!I have problem with power supply adp-400dr , no power 12v ,zero V.On both capacitors main filter have 290-300v dc , i know must be 390v, where is missing 60v, i check nothing in short nothing burning, afc diode and mosfet is ok, and fet s too, i dont where i looking
I had bought a new 400DR to replace one that was giving no power. I installed the new 400DR into my system and plugged in cables to test but it still didn't turn on although I can feel my system was slightly hot to to touch. Any Tip? is the new PSU defective? is it the motherboard?
There could certainly be a problem on the main board. You would need to confirm that your supply is supplying 12V out. If it is outputting 12V, everything else happens on the mainboard.
I've never seen a cockroach in the flesh and know little about them but I'm guessing the existence of cockroach remains in a console means that it came from a hell hole?
My PS5 wont turn after lightning struck right near my house, I already had sent in for diagnostics but they couldn’t do anything. Can I pay you to fix my PS5?
I have two PS5 power supplies that I would like to send you, and I have tried to repair it but I have not found the problem. If I could repair it and make a video it would be great
Hi, thanks for help us,respect!I have problem with power supply adp-400dr , no power 12v ,zero V.On both capacitors main filter have 290-300v dc , i know must be 390v, where is missing 60v, i check nothing in short nothing burning, afc diode and mosfet is ok, and fet s too, i dont where i looking
Great job sir. Glad that we aren't dealing with bad parts this time.
So true! Thanks!
Thank you for sharing and well done. It is nice when it is just the power supply. Getting it out of its casing was difficult.
I need a simple one every now and then. The case did put up a fight!
if the caps don't bite ya, the case will! I have never opened up one of those ps5 power supplies, but it looks like a real pain. Literally. Gj m8. Thanks for the vid
Just 2 screws but SO many plastic latches! Thanks for stopping by!
Another enjoyable video, I repaired one of those lately with 1sec 12V thanks . Glad to see you back.
Thank you! Congratulations! I didn't think I was gone that long.
Ur the best guy ever thanks dude i fixed my ps5 power supply coz of ur videos good job 💯
I’m glad I could help! Congratulations!
Glad to see you back, thanks for the video...
Of course! Was I gone that long?
Nicely done! Looking forward to the next one! :)
Thank you! I'm working on the next one!
Starting to really like your knowledge on the PS5
Thanks! I'm still learning the PS5. There is still a lot more to learn.
Yes, when the drive is not connected there isn't any action on the eject button. I just dislike when I get a proper boot sequence only to find there's no signal on the tv. Great job Toltec
Thanks for confirming that! Thank you, also, for coming by!
Nice win thanks for sharing
Thank you so much!
Very good sir, youre the best
Thank you! That's very kind of you!
1:16 keep looking at the top left of the towel you see something that looks like a roach or bed bug. Keep looking until the camera come back to the same spot and you see the bug is gone. And that’s how you bring bugs into your home.
Good job mate 👍
Thank you!
Thanx masters ❤️🇹🇷
Thanks for watching!
keep trucking man. would love to chat if you ever get a chance!
just a question Im still self teaching myself alot about electronics repair. in this case when testing why did you put the red probe on ground instead of the black one? usually its reversed but im sure you had a reason for it. as always great fix love the videos i learn alot from you.
That would be testing in diode mode to test for diode junctions
You can use diode mode however you like but having the positive probe on ground tends to give a reading more often than having the negative probe on ground. This is simply because of the way ICs are manufactured. If you use black probe on ground, quite often you just get OL reading. If you see diode readings listed online somewhere, the readings will normally be taken with red probe on ground.
@@ToltecMerc ah i see i did not know that. thank you for the reply looking forward to the next video.
Thanks 🙏
You're welcom!
Good video 👍
Thank you very much!
Great video as always, do you have PS5 Southbridge readings you can share?
Sorry, I do not. I need to take a lot of measurements and make notes but there is never enough time.
Nice job. One tip only. Use it flat.(you know the whole issue with liquid metal)
That was all blah blah it doesn't affect anything
@@MultiVoiceofreason Please dude, if you don't know the liquid metal density becomes like water at certain temperature, then you shouldn't give an opinion as if it's the revealed truth.
Hi, thanks for help us,respect!I have problem with power supply adp-400dr , no power 12v ,zero V.On both capacitors main filter have 290-300v dc , i know must be 390v, where is missing 60v, i check nothing in short nothing burning, afc diode and mosfet is ok, and fet s too, i dont where i looking
Same problem. Did you fine the solution
I had bought a new 400DR to replace one that was giving no power. I installed the new 400DR into my system and plugged in cables to test but it still didn't turn on although I can feel my system was slightly hot to to touch. Any Tip? is the new PSU defective? is it the motherboard?
There could certainly be a problem on the main board. You would need to confirm that your supply is supplying 12V out. If it is outputting 12V, everything else happens on the mainboard.
My ps5 has the same problem is dead,maibe it is the same problem?
What could it be if make a beeps but no power or light, just beep, I got my electric service went down and I think after that it stop working
I think the HDMI encoder can cause this.
@@ToltecMerc I try diferent cable and port but I will double check again
@@FalopioGaming check for shorts around HDMI encoder IC.
any difference between 400ER and 400DR?
Yes, there are slight differences. Still similar as far as ICs used.
I am on my 4th PS5 PSU, got 3 of them burned in my drawer
I've never seen a cockroach in the flesh and know little about them but I'm guessing the existence of cockroach remains in a console means that it came from a hell hole?
It usually means the environment it came from was not the cleanest. They thrive in those environments.
@@ToltecMerc Thought as much. Thanks for the reply, great content as always.
My PS5 wont turn after lightning struck right near my house, I already had sent in for diagnostics but they couldn’t do anything. Can I pay you to fix my PS5?
good day, could I ask for a link to those chips 🫣thank you
www.mouser.com/ProductDetail/512-FCPF13N60NT
I have two PS5 power supplies that I would like to send you, and I have tried to repair it but I have not found the problem. If I could repair it and make a video it would be great
Hi, thanks for help us,respect!I have problem with power supply adp-400dr , no power 12v ,zero V.On both capacitors main filter have 290-300v dc , i know must be 390v, where is missing 60v, i check nothing in short nothing burning, afc diode and mosfet is ok, and fet s too, i dont where i looking
Same problem. Did u find the solution