The belt clip is designed to lock the radio in, to remove the radio you need to turn it upside down (antenna facing the ground) and pull it up to remove it.
Just FYI, the clip is all about the notch he mentions in the "stud" if the notch is on top (1 o'clock position), you have to turn it upside down to the (7 o'clock position) and slide it off as @robertsampson8278 just said. But if you install it with the notch on the bottom, you only have to angle the phone to the 1 o'clock position to take it off. Having to turn it upside down to remove will be more secure, but less convenient if you have to remove it more frequently. Just wanted to share as I had some pain with the clip too and this discovery made all this make so much more sense. Great review though, appreciate how thorough it was!
Just look how the notch is in the stud. I grab over the buttons with my palm, fingers over base of the radio, and it pops right out. I hated the belt clip when I saw it now i love it
We have a lot of GMRS Repeaters in Southern California. A lot of Marine activity and tons of amateur repeaters. Having a unlocked radio can save your life or save someone else's life in case of emergencies.
I have the two High Power versions. They deliver 6-7 watts with a fresh charge. I also purchased and "enlarged" battery from China. Two versions are available at 8000mAh and a 9300mAh, I wouldn't trust those numbers, but they do last longer than the standard OEM supplied batteries.
I had the same reaction as you when I first learned of this product - oh boy, I'll take 2! - unfortunately, many of them seem to be affected by some kind of bug where, once programmed with CHIRP, the squelch kicks in erratically even on strong signals such as a nearby NOAA station, making reception choppy and unintelligible. Weirdly, this behavior goes away upon pressing the menu button, and the radio receives normally until the menu times out, then goes back to squelch problem. This makes the radio essentially useless unless squelch is set to 0. So, I still have those two lovely UV-9R Pro radios sitting around, waiting for the day this bug is figured out. Edit: and yes, I swapped antennas and did all sorts of tests - I'm 99.9% sure it's some kind of firmware bug.
I have now got a UV-9R Pro and a UV-13 Pro and I far prefer the UV 13 Pro, although the UV-9R pro does have a better look/feel. The UV-9R battery attachment is problematic, mine didn't hold the battery pack securely. The lack of VFO/MR button on the UV-9R pro is a real pain in the rear end when manually programming. The UV-13 Pro allows you to switch VFO/MR by holding down the menu button. Also the UV-13 Pro has a scanning range setting, 999 memories, and uses the more common twin-jack programming cable, USB-C charging, and the battery fixes more securely. I now have another couple on their way!
The notch on the belt-clip stud makes it safe in all positions, except with the antenna down, then it releases the radio from the clip. I mean... circle the radio upside-down and the stud easily releases from the belt clip.
The belt clip stud has kind of a cam function to it. If you pivot the radio, it comes out easier. It goes in easy no matter the position. I think it's to keep the radio secure when bumped.
As Jason has noted, you pivot the radio 180 degrees to remove it from the clip. I personally like this type of clip. Use it on my VX-6. Also, ABREE makes a speaker mike for this radio.
@@Backbone91 same thing I did. Used this type of clip on my police radio back in the day, I like the design. Simply rotate the radio and it comes right off the clip…
The belt slip on the radios work fine once you learn how it works. I hated it at first, but then I realized that it is designed to securely hold the radio, and when you draw the radio from your hip you angle it slightly forward (which actually is a natural movement for a hip draw; gripping it as if your about to transmit) and it pulls right off without any issue. I still like the pouch idea though, because the free swing while on your hip kind of annoys me slightly.
YEAH, You have to align the slit to release the belt clip. I keep my slit at the 1 O'clock position so it can not come out until inverted and a little toward the front when on the right side of my belt. Hope that helps and thanks for the video.
Good to see you back on TH-cam. Hope you stayed high and dry during all the rain. Looked like you where in the thick of things from the info I saw. Thanks for sharing this. Looks like a great low budget radio.
Hey thank you for that heads up on that adapter I like using the two pin way cuz I can disconnect I hate unscrewing that adapter off every time or the speaker mic so thank you
good morning...I live in Europe and due to their directive the UHF band does not work below 430 MHz....some say that with a simple reset to factory conditions this problem will be solved....on this model which is what I would like to buy, do you know how to return to factory conditions via the radio itself? thanks a lot in advance
It's not legal for use as an FRS (unlicensed) radio. I'm not sure of the legality of using it as a GMRS (inexpensive license with no test) radio. Your best bet might be to use it on MURS (unlicensed) channels, although I'm not an expert as to whether it's actually legal to the letter of the law on MURS.
That speaker mic adapter from the waterproof connector to the K1 connector is nice i would go well with my Raytalk RSM-350 ip67 Speaker Mic apprecite the links Scott 18:40 @KS6DAY
Looking forward to seeing the dunk video. I was out canoeing with my VX-6 today and I was thinking that I would love to get an easier to use waterproof radio.
I just bought this. I thought dual band means you will ALWAYS receiving on both bands but it seems to only receiving on the selected band (top or bottom). Is this how it supposed to work or I got a bad one?
Short press the green menu button to enter the menu selections. Arrow up to Item #7 - "TDR". Press menu again to select the item. Use the arrow keys to select "ON". Press menu again. Press the grey exit key. You should now hear traffic from both the A & B bands.
Even though you turned the volume up on camera, how does it compare to the uv-5r/gt3wp? I use them to monitor business channels for work, in a fairly noisy environment. The normal speakers just don't cut it compared to the Motorola's/Kenwood's used by the other companies
I would like to run this radio in my carrier attached to an Earmor Kenwood PTT. I have a Walker's Razor Slim headset and noticed need a 3.5mm jack. Seems I have to get a U-174 adapter to be able to run it into my headset. It is also questionable whether the Earmor PTT will work with my headset. Am I going about it the right way? Any advice would be appreciated.
I am sure I will get hate for this statement but I have a GMRS license I don't broadcast on any repeter frequencies. They are mainly used around the house on low power mode always broadcast on an empty channel. But I definitely use Baofengs for our uses. I know it's not legal but I am following the law on power and everything else. No way would I get in trouble for this. You can pick them up mainly on our property. I personally don't see any thing I am doing that is wrong.
I bought my UV-9R Pro before the Pandemic, I would guess 2018. 2018 was a strange year for Baofeng as it was having lot of issues with the FCC and Chip Shortages. All Baofeng Radios made at this time were crappy because of the Chip Shortage and other issues. Thus, my two (2) UV-9R Pros came without the FM Radio Receive though it was advertised as such and it allows it on the menu and buttons but nothing comes out of the speaker for FM Radio. Otherwise, like you stated, it is a good radio, and waterproof to boot. As for the other UV-S9, as much as you chewed on it being a bad radio, I have two of the UV-S9X3 version of the UV-S9.Though there are issues with the case, I hav no problems with the radio itself. Speaking of Cases, as you described the UV-5R and the UV-S9 feeling light-weight like a toy radio but the UV-9R Pro being hefty and strong, According to your Logic my Yaesu VX1 & VX3 radios are toys and my Icom W32A (RIP) being a strong Manly Radio. Unfortunately for the Icom W32A, the plastic case began to fail on it and it simply crumpled in my hands after a few years of use. It was an excellent radio but a terrible case. But my two little Yaesus are still going strong after more than 15 years (more then 20 for the VX1) of use! And these little Yaesus have been through it all - falls, water dunks, dirt, grime, being banged around in bags and trunks of cars and they are still intact and without a scratch! And Guess What - my first Baofeng (A UV-5R) has underwent just as much abuse that I had put the Yaesus for the past 5 years and except for a tiny chipped piece of plastic on the base on the battery, there I not even a scratch on the radio! However, the buttons are fading from the rubbing they get when inside my pocket. I hear that there is a seller out there selling UV-5R parts including a new rubber key pad for just a few bucks. But to me the UV-9R Pro feels flimsy to me. Perhaps it is all that water proofing they have in it, making the radio bigger than it is actually needed to be. But that is my opinion from my experience on this matter. An excellent video with great information but sounding a bit tad biased about it.
Hello! I appreciate your video very much. I needed a suggestion from you, what frequency would you suggest for me in an urban area, in the Frequency Mode, because I own a radio identical to this one, a Uv-9r Pro??
It depends. You'd have to look up agencies in your area to see. Some public safety radio traffic is still on channels these radios can receive, but a lot of it is now on "trunked" systems which generally operate at frequencies far outside of what the Baofengs can pick up, and may be digital / encrypted as well.
Yeah Amazon sells the original Nagoya antenna it works very well with my thank you so much for sharing this video it's a very nice it's not a Kenwood but it gets the job done and it's well-made 😎
Only the ones that were protected in a faraday cage prior to the event. But many thanks for the reminder. I happen to have a small steel garden trash can, a rubber bucket and a roll of aluminum tape that I had set aside for a video on this very topic but I keep getting side tracked. I will get that video done soon.
I purchased one 12/27/2023 and immediately liked the robust feel in my hand. However, while programming and handling, I felt movement between the radio body and its battery. An estimated 1/32" gap at the bottom, where battery is supposed to lock, was evident. Not a good thing for alleged being water proof. I returned it for an item exchange, thinking the issue was a one time event. The replacement was received today (1/9/2024) and the only two items I removed from the box were the radio body, and the battery for an immediate fit trial. The same situation applies to this radio. This will be returned to Amazon, for a refund, this time. I realize these are low end items, and I do own several of it's variants, but all have very good and at times, difficult to remove tight fitting batteries. Again, I can't comprehend how BAOFENG classify this radio as IP67 water proof as it's indicated on the nice, colorful box, as well as in the Users Manual. How you spend your money is not my concern, but mine will not be spent again on this very disappointing excuse for a radio.
Just take it off and buy a pouch. Performance wise, this radio and the Nagoya knock off antenna definitely outperform all other Boafeng models I've used.
I think you would like to comment better it's the same kind of construction but it's a little better better made I think it sells for $25 and they give you an o-ring with it fits over your SMA male connection so you don't see any of the parts I'll be honest I love to comment better it's my preference you check it out tell me what you 👍
I've put a ton of work into figuring out the best (least-worst) "waterproof" Baofeng model for SHTF comms over the past year, and so far I've come to the conclusion that the GT-3WP is the best, mostly because it seems to have the fewest firmware bugs and programming issues (I use CHIRP exclusively to program the radios).
That's actually fairly current. I did a review on the Yaesu FT-60 & VX-6 and they came out in 2004/2005. I should get around to those that you mentioned sometime around 2028.
Don't matter how many uv- whatever bilefang radios come out these need change menus program function and a button like Kenwood they totally need revamped . How many bile-fangs are out there all triband versions no extra batter available . It's ridiculous . Where 6 meter baofeng or 1.2 g or 33 cm band bilefangs. . These sma F antennas some don't conduct .. Atleast Wouxun radios have quality to them . Thanks for making a video . But there are too many these repeat made radios. For $32 UV-82 8Watt version you can get an extended life battery.
I get it. I'm already pretty well known for not being a fan of these radios. But I also realize that, despite all of the effort I put in to point people towards better radios, many will still start out messing with these. So, I at least try to showcase the "best of the breed" so to speak. However, most of my efforts on this channel are expended towards higher end HT's and practical radio skills.
@@KS6DAY Ya there are better radios. I know these china ht"s came out everyone sprints to buy 1 well that's ok in beginning 1 uv- 5 r move on. But there are Krazy expensive HT"s like triband Kenwood that's to much or c4fm super priced HT. But there are others more affordable from our mainstream companies. $200 range or lower. . Enjoy what your showing on your channel I wasn't complaining just pointing out baofeng repeated same manufacture standards. 8 actually have the wouxun radios they sound better out speaker costed new $119-129 keep it up with videos .
I did one. It was up for a couple months. Because it had an SWR test it got pulled down with the rest of them. What results did you get? I don't recall any particular problem.
@@KS6DAY When I tested my Baofeng BF F8hp, which is a 8 watt radio, using a digital SWR/Power meter, and a Signal Stick. on 146.000, I got a swr reading of 1.0. And a power output of 8 watts. Now as soon as I changed frequencies, the SWR's went up and the power went down. But, as long as I stayed in the 146 to 147 ranges, my Swr's never got about 1.3. And power went down to 7.7 watts. I did not try outside the legal frequencies, since I did not want to burn out my radio. I suggest you use a signal stick on your's. It is Superior to the NA-771, which I also have. Hope this helps.
Never seen one. But I would like to get one in to have a look at it. I just checked all of the usual places and can't find a sales listing anywhere for a UV-18R Pro. Where did you get yours and how much are they?
I've watched 50 of these videos. This one has a battery or a jack or a set of noodles for crazy people. What in the hell do these accomplish? I can listen to alex jones? or ambulance and fire?
The belt clip is designed to lock the radio in, to remove the radio you need to turn it upside down (antenna facing the ground) and pull it up to remove it.
Just FYI, the clip is all about the notch he mentions in the "stud" if the notch is on top (1 o'clock position), you have to turn it upside down to the (7 o'clock position) and slide it off as @robertsampson8278 just said. But if you install it with the notch on the bottom, you only have to angle the phone to the 1 o'clock position to take it off. Having to turn it upside down to remove will be more secure, but less convenient if you have to remove it more frequently.
Just wanted to share as I had some pain with the clip too and this discovery made all this make so much more sense.
Great review though, appreciate how thorough it was!
Just look how the notch is in the stud. I grab over the buttons with my palm, fingers over base of the radio, and it pops right out. I hated the belt clip when I saw it now i love it
We have a lot of GMRS Repeaters in Southern California. A lot of Marine activity and tons of amateur repeaters. Having a unlocked radio can save your life or save someone else's life in case of emergencies.
I have the two High Power versions. They deliver 6-7 watts with a fresh charge. I also purchased and "enlarged" battery from China. Two versions are available at 8000mAh and a 9300mAh, I wouldn't trust those numbers, but they do last longer than the standard OEM supplied batteries.
Hey Bruce how’d you find a leather battery? Been searching high and low but seems like waterproof reps don’t usually offer larger batteries
I got a large battery for the UV-5R (BL-5L) and it holds only very slightly more charge than the regular battery.
I had the same reaction as you when I first learned of this product - oh boy, I'll take 2! - unfortunately, many of them seem to be affected by some kind of bug where, once programmed with CHIRP, the squelch kicks in erratically even on strong signals such as a nearby NOAA station, making reception choppy and unintelligible. Weirdly, this behavior goes away upon pressing the menu button, and the radio receives normally until the menu times out, then goes back to squelch problem. This makes the radio essentially useless unless squelch is set to 0. So, I still have those two lovely UV-9R Pro radios sitting around, waiting for the day this bug is figured out. Edit: and yes, I swapped antennas and did all sorts of tests - I'm 99.9% sure it's some kind of firmware bug.
So as long as I don't do chirp, and just use these radios like they come stock - I'll be fine?
I'm from the central valley as well! Lived there 30 years before moving to Montana.
I have the UV-9R that I purchased about 4 years ago. I immersed it for 30 minutes and it is good to go. That belt clip is crap.
Would love to see an operation guide video for it. Also more of a comparison to the UV-5R
I miss the days when we had OD Uniforms In the US Army 7:40 @KS6DAY
I have now got a UV-9R Pro and a UV-13 Pro and I far prefer the UV 13 Pro, although the UV-9R pro does have a better look/feel. The UV-9R battery attachment is problematic, mine didn't hold the battery pack securely. The lack of VFO/MR button on the UV-9R pro is a real pain in the rear end when manually programming. The UV-13 Pro allows you to switch VFO/MR by holding down the menu button. Also the UV-13 Pro has a scanning range setting, 999 memories, and uses the more common twin-jack programming cable, USB-C charging, and the battery fixes more securely. I now have another couple on their way!
I will be taking a look at the UV-13 Pro soon.
The notch on the belt-clip stud makes it safe in all positions, except with the antenna down, then it releases the radio from the clip. I mean... circle the radio upside-down and the stud easily releases from the belt clip.
The belt clip stud has kind of a cam function to it. If you pivot the radio, it comes out easier. It goes in easy no matter the position. I think it's to keep the radio secure when bumped.
As Jason has noted, you pivot the radio 180 degrees to remove it from the clip. I personally like this type of clip. Use it on my VX-6. Also, ABREE makes a speaker mike for this radio.
@@cmndo9741 I turned my stud clip 180 degrees, so I just have to turn it a little to come out of the belt clip.
@@Backbone91 same thing I did. Used this type of clip on my police radio back in the day, I like the design. Simply rotate the radio and it comes right off the clip…
I believe I have the same clip for my old Nokia phone
The belt slip on the radios work fine once you learn how it works. I hated it at first, but then I realized that it is designed to securely hold the radio, and when you draw the radio from your hip you angle it slightly forward (which actually is a natural movement for a hip draw; gripping it as if your about to transmit) and it pulls right off without any issue. I still like the pouch idea though, because the free swing while on your hip kind of annoys me slightly.
YEAH, You have to align the slit to release the belt clip. I keep my slit at the 1 O'clock position so it can not come out until inverted and a little toward the front when on the right side of my belt. Hope that helps and thanks for the video.
Using the AR-152 must look like you're about to call in an air-strike...lol.
Woohoo been looking forward to this one!!!
Good to see you back on TH-cam. Hope you stayed high and dry during all the rain. Looked like you where in the thick of things from the info I saw. Thanks for sharing this. Looks like a great low budget radio.
Looks alot like the UV-9G interesting 0:49
If you’re still looking for a speaker mic for these, I ordered one for my UV5G from radioddity this week. Same pins as the 9R so I assume they’d work.
we use Specter gears too.. so nice quality and sturdiness..!
Hey thank you for that heads up on that adapter I like using the two pin way cuz I can disconnect I hate unscrewing that adapter off every time or the speaker mic so thank you
The UV-5R can be unlocked to allow access to the 1.25 meter band. Does it work for this one as well?
good morning...I live in Europe and due to their directive the UHF band does not work below 430 MHz....some say that with a simple reset to factory conditions this problem will be solved....on this model which is what I would like to buy, do you know how to return to factory conditions via the radio itself? thanks a lot in advance
The clip has a groove so that you put it in side ways kinda like a gun holster vits a safety clip you have to turn to release
Nice specter gear pouch
Can you use this if you do not have a HAM license? ie, shtf or communicating with family members hunting, hiking etc?? Thank you
It's not legal for use as an FRS (unlicensed) radio. I'm not sure of the legality of using it as a GMRS (inexpensive license with no test) radio. Your best bet might be to use it on MURS (unlicensed) channels, although I'm not an expert as to whether it's actually legal to the letter of the law on MURS.
Operator Series on these cheaper radios is a great idea 26:30 @KS6DAY
That speaker mic adapter from the waterproof connector to the K1 connector is nice i would go well with my Raytalk RSM-350 ip67 Speaker Mic apprecite the links Scott 18:40 @KS6DAY
Great video, thanks for making it good sir 🎉
Fits the UV-9R Pro in the charging dockingstation from the UV-9R Plus?
Looking forward to seeing the dunk video. I was out canoeing with my VX-6 today and I was thinking that I would love to get an easier to use waterproof radio.
I just bought this. I thought dual band means you will ALWAYS receiving on both bands but it seems to only receiving on the selected band (top or bottom). Is this how it supposed to work or I got a bad one?
Short press the green menu button to enter the menu selections. Arrow up to Item #7 - "TDR". Press menu again to select the item. Use the arrow keys to select "ON". Press menu again. Press the grey exit key. You should now hear traffic from both the A & B bands.
@@KS6DAY You are the man!!! Thank you. First day with this and I'm still learning.
I didn't know you were the guy that sold the pouches yeah I bought some of those patches while back for the bill thing radios are good real good 👍
If you snap in the battery, what gets damaged? Battery? Or radio?
Even though you turned the volume up on camera, how does it compare to the uv-5r/gt3wp? I use them to monitor business channels for work, in a fairly noisy environment. The normal speakers just don't cut it compared to the Motorola's/Kenwood's used by the other companies
I would like to run this radio in my carrier attached to an Earmor Kenwood PTT. I have a Walker's Razor Slim headset and noticed need a 3.5mm jack. Seems I have to get a U-174 adapter to be able to run it into my headset. It is also questionable whether the Earmor PTT will work with my headset. Am I going about it the right way? Any advice would be appreciated.
button combination for factory reset
wish I could find it. have you?
Can this radio take the extended size batteries I have for my UV-5Rs?
Unfortunately, no. The UV-9R Pro uses a completely different battery type.
Does this have the channel frequency scan?
I am sure I will get hate for this statement but I have a GMRS license I don't broadcast on any repeter frequencies. They are mainly used around the house on low power mode always broadcast on an empty channel. But I definitely use Baofengs for our uses. I know it's not legal but I am following the law on power and everything else. No way would I get in trouble for this. You can pick them up mainly on our property. I personally don't see any thing I am doing that is wrong.
FCC won't do anything if they notice you doing that they haven't even prosecuted anyone yet🤣
what about the 9R pro compared to the 5G plus?
Hi they make a claim the range is 50kms I would be happy if I could get 3 miles
Do you have a link to those antenna
When are you guys going to get the 11-99 bag back ?
I bought my UV-9R Pro before the Pandemic, I would guess 2018. 2018 was a strange year for Baofeng as it was having lot of issues with the FCC and Chip Shortages. All Baofeng Radios made at this time were crappy because of the Chip Shortage and other issues. Thus, my two (2) UV-9R Pros came without the FM Radio Receive though it was advertised as such and it allows it on the menu and buttons but nothing comes out of the speaker for FM Radio.
Otherwise, like you stated, it is a good radio, and waterproof to boot.
As for the other UV-S9, as much as you chewed on it being a bad radio, I have two of the UV-S9X3 version of the UV-S9.Though there are issues with the case, I hav no problems with the radio itself.
Speaking of Cases, as you described the UV-5R and the UV-S9 feeling light-weight like a toy radio but the UV-9R Pro being hefty and strong, According to your Logic my Yaesu VX1 & VX3 radios are toys and my Icom W32A (RIP) being a strong Manly Radio. Unfortunately for the Icom W32A, the plastic case began to fail on it and it simply crumpled in my hands after a few years of use. It was an excellent radio but a terrible case. But my two little Yaesus are still going strong after more than 15 years (more then 20 for the VX1) of use! And these little Yaesus have been through it all - falls, water dunks, dirt, grime, being banged around in bags and trunks of cars and they are still intact and without a scratch! And Guess What - my first Baofeng (A UV-5R) has underwent just as much abuse that I had put the Yaesus for the past 5 years and except for a tiny chipped piece of plastic on the base on the battery, there I not even a scratch on the radio! However, the buttons are fading from the rubbing they get when inside my pocket. I hear that there is a seller out there selling UV-5R parts including a new rubber key pad for just a few bucks.
But to me the UV-9R Pro feels flimsy to me. Perhaps it is all that water proofing they have in it, making the radio bigger than it is actually needed to be. But that is my opinion from my experience on this matter.
An excellent video with great information but sounding a bit tad biased about it.
Does that K-plug adapter work with programming, as well?
Can I use an extended uv5r battery the the uv9r?
Hello! I appreciate your video very much. I needed a suggestion from you, what frequency would you suggest for me in an urban area, in the Frequency Mode, because I own a radio identical to this one, a Uv-9r Pro??
quick question can you use that radio to
Listen to law Enforcement frequencies?
It depends. You'd have to look up agencies in your area to see. Some public safety radio traffic is still on channels these radios can receive, but a lot of it is now on "trunked" systems which generally operate at frequencies far outside of what the Baofengs can pick up, and may be digital / encrypted as well.
Yeah Amazon sells the original Nagoya antenna it works very well with my thank you so much for sharing this video it's a very nice it's not a Kenwood but it gets the job done and it's well-made 😎
I believe many aftermarket antennas need to be sanded down a little bit to fit the recessed connector on the UV-9R Pro, the GT-3WP, etc.
Hi just have a question…can I use this kind of radio and use frs frequency so I don’t have to get a license? Thank you in advance
Yes no one would ever know
not mine came charged and tryed outa box wont turn on wont charge crap in my opion
What radio or radios would you use after an EMP or CME? That would be a great video.
Only the ones that were protected in a faraday cage prior to the event. But many thanks for the reminder. I happen to have a small steel garden trash can, a rubber bucket and a roll of aluminum tape that I had set aside for a video on this very topic but I keep getting side tracked. I will get that video done soon.
We’re is the power test
Very helpful, thank you sir!
I purchased one 12/27/2023 and immediately liked the robust feel in my hand. However, while programming and handling, I felt movement between the radio body and its battery. An estimated 1/32" gap at the bottom, where battery is supposed to lock, was evident. Not a good thing for alleged being water proof. I returned it for an item exchange, thinking the issue was a one time event.
The replacement was received today (1/9/2024) and the only two items I removed from the box were the radio body, and the battery for an immediate fit trial. The same situation applies to this radio. This will be returned to Amazon, for a refund, this time.
I realize these are low end items, and I do own several of it's variants, but all have very good and at times, difficult to remove tight fitting batteries. Again, I can't comprehend how BAOFENG classify this radio as IP67 water proof as it's indicated on the nice, colorful box, as well as in the Users Manual.
How you spend your money is not my concern, but mine will not be spent again on this very disappointing excuse for a radio.
Btech 6x2 ip54 aes256 encrypted two battery’s $208 hard to beat that IMHO
Thanks for sharing this video. Very interesting and appreciated.
73s from KJ4BGW
The belt clip is a deal killer! I regret the UV 9R pro because of it.. absolutely awful to hold and bulky as heck
Just take it off and buy a pouch. Performance wise, this radio and the Nagoya knock off antenna definitely outperform all other Boafeng models I've used.
And, shooting a 9mm pistol hurts your wrist. Thumbs up for tacticool skinny jeans!
I think you would like to comment better it's the same kind of construction but it's a little better better made I think it sells for $25 and they give you an o-ring with it fits over your SMA male connection so you don't see any of the parts I'll be honest I love to comment better it's my preference you check it out tell me what you 👍
I love the gt-3WP.. what would you recommend as an upgrade? I like having the vhf uhf capabilities. Wish it was more power but it’s hard to beat.
I've put a ton of work into figuring out the best (least-worst) "waterproof" Baofeng model for SHTF comms over the past year, and so far I've come to the conclusion that the GT-3WP is the best, mostly because it seems to have the fewest firmware bugs and programming issues (I use CHIRP exclusively to program the radios).
Disco32 baofeng multipin ptt
Works on it?
Bit outdated with the reviews when you now have radios such as the uv-17 pro with GPS. The uv-s22 essentially replaces the uv-9r.
That's actually fairly current. I did a review on the Yaesu FT-60 & VX-6 and they came out in 2004/2005. I should get around to those that you mentioned sometime around 2028.
Don't matter how many uv- whatever bilefang radios come out these need change menus program function and a button like Kenwood they totally need revamped . How many bile-fangs are out there all triband versions no extra batter available . It's ridiculous .
Where 6 meter baofeng or 1.2 g or 33 cm band bilefangs. . These sma F antennas some don't conduct ..
Atleast Wouxun radios have quality to them . Thanks for making a video .
But there are too many these repeat made radios.
For $32 UV-82 8Watt version you can get an extended life battery.
I get it. I'm already pretty well known for not being a fan of these radios. But I also realize that, despite all of the effort I put in to point people towards better radios, many will still start out messing with these. So, I at least try to showcase the "best of the breed" so to speak. However, most of my efforts on this channel are expended towards higher end HT's and practical radio skills.
@@KS6DAY
Ya there are better radios.
I know these china ht"s came out everyone sprints to buy 1 well that's ok in beginning 1 uv- 5 r move on.
But there are Krazy expensive HT"s like triband Kenwood that's to much or c4fm super priced HT. But there are others more affordable from our mainstream companies. $200 range or lower. . Enjoy what your showing on your channel I wasn't complaining just pointing out baofeng repeated same manufacture standards. 8 actually have the wouxun radios they sound better out speaker costed new $119-129 keep it up with videos .
Okay, since you have yet to do a power test on this radio. When you try it, use 146.000, and I think you will be surprised.
I did one. It was up for a couple months. Because it had an SWR test it got pulled down with the rest of them. What results did you get? I don't recall any particular problem.
@@KS6DAY When I tested my Baofeng BF F8hp, which is a 8 watt radio, using a digital SWR/Power meter, and a Signal Stick. on 146.000, I got a swr reading of 1.0. And a power output of 8 watts. Now as soon as I changed frequencies, the SWR's went up and the power went down. But, as long as I stayed in the 146 to 147 ranges, my Swr's never got about 1.3. And power went down to 7.7 watts. I did not try outside the legal frequencies, since I did not want to burn out my radio. I suggest you use a signal stick on your's. It is Superior to the NA-771, which I also have. Hope this helps.
@@longrider42 Got it. Thanks for the info.
Looks like a tyt uv-88
No the 18 pro with gps is
Never seen one. But I would like to get one in to have a look at it. I just checked all of the usual places and can't find a sales listing anywhere for a UV-18R Pro. Where did you get yours and how much are they?
I've watched 50 of these videos. This one has a battery or a jack or a set of noodles for crazy people. What in the hell do these accomplish? I can listen to alex jones? or ambulance and fire?
Insane uv 9r is $150 in canada 😢😢
👀
It is not waterproof, barely splash resistant, and is built like a toy. The RF side is no upgrade being little different from the UV-5r.
Not interested in Chinese radios
@@530eman I saw your message about Chinese radios and Don’t like the Chinese anything.
Noted.
Why are you lookihng at videos about Chinese radios then? 😆