Hi Sir, thanks! for the video! I will subscribe and save the video...may I ask how are you planning to remove the carbon and all shit from the back of the valves cover? You mentioned you will take care of this problem in the oil change...will you use a motor flush product maybe? I want to remove some shit I see thought the oil eye (where we put oil inside normally) and I don´t know if I should open and clean or use a motor flush product. Thanks again!
Hi, you didn't install the plastic cam cases back on before replacing the rocker cover back on .. Is there any consequences or benefits to this? I'm only asking as I recently had a cam chain tensioner replaced and only just realised when topping up with oil that there's no plastic caps covering the camshaft so wondered if this may cause a problem in the future or is it perfectly safe to drive? My concern is that at high revs, there may be a possibility of oil feeding into hose that fits into the back of the rocker cover... Any advice on this would be much appreciated..
What about the halfmoon gasket at 4:08 is this a separate gasket that you need to put in place on the head first with silicone and then install the main valve cover gasket? Thanks
A6 Throttle Body Video : th-cam.com/video/ssMuklcRLHQ/w-d-xo.html
This was exactly what I was looking for. Thank you very much!
Why didn’t use any sealant maker to some corner or place that’s needed before placing the gasket?
Just curious, thank you
Thanks for your videos - excellent walk-thru. Fantastic!😀
My pleasure!
I’d gladly make a holiday out of a roadtrip to your garage next time I my car deserves some prophylactic maintenance.
I recommend checking the pcv systemet assvell, mine was totally clogged whit oil sludge and had holes in some hoses,
How much torque for the screws when put back together?
Hey did you put silicone on the 4 corners of the valve cover gasket? If not did it ever leak?
Yes you need to. It says in the manual.
Hi Sir, thanks! for the video! I will subscribe and save the video...may I ask how are you planning to remove the carbon and all shit from the back of the valves cover? You mentioned you will take care of this problem in the oil change...will you use a motor flush product maybe? I want to remove some shit I see thought the oil eye (where we put oil inside normally) and I don´t know if I should open and clean or use a motor flush product. Thanks again!
Hello ! First the external oil leaks must be identified and fixed , thats the challenge, cleaning it it's all about remiving the components
Hi, you didn't install the plastic cam cases back on before replacing the rocker cover back on .. Is there any consequences or benefits to this? I'm only asking as I recently had a cam chain tensioner replaced and only just realised when topping up with oil that there's no plastic caps covering the camshaft so wondered if this may cause a problem in the future or is it perfectly safe to drive? My concern is that at high revs, there may be a possibility of oil feeding into hose that fits into the back of the rocker cover... Any advice on this would be much appreciated..
I'm not completly sure but I think the plastic covers are there so it doesnt splash oil into the crankcase ventilation outlet in the rear right
I have a 1.8t avj a4 b6 that is leaking on the right side of the engine do you think its a cover gasket or something else?
hey did you find the problem and solution?
@@mustafasezgintilki4482 it was the volve cover gasket
What about the halfmoon gasket at 4:08 is this a separate gasket that you need to put in place on the head first with silicone and then install the main valve cover gasket? Thanks
Nope, it's the same, one big gasket and the small inner one for the spark plugs.
dude.. just throw that garbage in the trash where it belongs and get a real car, that runs on electricity instead of dino corpses.
The situation is much more complex than that