From the 50s thru the 1980 in the US this method was used as well as with wheel trenchers to excavate ditches. The wheel trencher pulled a trapezoidal form behind instead of a crumbed bar that cut the slope. Once you graded the ditch line you used various systems to stay on grade while cutting ditch. Once the ditch was dug a form very similar to ''tis was dropped in the front of the form was larger than the the rear by the thickness of the concrete used to line the ditch. The center of the form was open and concrete was fed into the opening. Vibrators on the back of the form consolidated the concrete and the form was pulled ahead. Our largest wheel trencher, a Garwood Super G, could cut a 6' bottom ditch. For the larger ditches a dozer with a winch and a short boom that helped to center the pull with the center of the ditch moved the slip form. Every 10-15' the finishers used a metal form to put in an expansion joint. The larger slip form could be configured for different trench bottoms by adding or removing spacers from the center of the slip form. The smaller slip form had a winch, like this one, that pulled against an anchor to move it forward. You should consider building your forms in an expandable configuration. You add a bolt together arrangement with a taller side to accommodate wider ditches. Build your form top as adjustable as well and sell expansion kits in sizes your customers may commonly need. Your main ditch has a 4' bottom and your branch ditches are 2' bottom so you remove your spacer to do so. Pipelines, wells, center pivots, wheel lines and lack of capital ended the hay days of these water projects in the western US. Good luck!
Look at topography.....huge field is level already......can use gps automation system on bucket for repeat operations......OR Just good operation by a real pro!
And same for concrete-- no rebar or screen for strength which they could easily lay in-Looks like maybe 3' per half hour with 3 + people and equipment and transportation-- they could make these 3' section offsite at a concrete yard with the water & mixers required and deliver 20 section per truckload- lock them with a simple integrated seal and move it along 3 x faster- AND if they needed to move the canal-- they had a reusable system to place elsewhere, when the farm got turned into residential or commercial. Better yet maybe stainless steel plate/fiberglass might even be cheaper.
Hello,San Francisco, the slope is decided by the concrete,it should be controlled 8-9 when making the concrete. My Email is andy@htenma.com If you have any questions,please feel free to contact me.
He thinks you are asking about the sidewall angle - that is calc'ed by the type of concrete mix. This is "upgrading" an older ditch so the water slope is well known.
You want a few of these canals going from the sea/ocean straight into the middle of the Gobi desert where they are growing that masive (like really massive) forest. Or rather, a bigger canal you can get a boat down, and then canals like this running off as "streams".
I agree. My comment said you'd need a big canal (for the boat) and then these come off for irrigation (and so I mean, the smalls ones are not for the boat). Cool video btw. Thumbs up.
Ridiculously slow process- if they had a simple conveyor transport for the dirt they could be 2x faster not requiring the 25 seconds per cycle of the repeated lift and dump. The operator can only do it so fast with repeated accuracy if the wedge scraper bucket was just pulled back constantly- it would be a much faster production.
can u supply and give service support in India?what is the cost of Machine excluding freight + Delivery cost to India/Hyderabad? time required to supply..
Yes,we can export to India and send construction workers to make the canal for you. My email is andy@htenma.com If you want more details from us,please send Email to me.
This machine does not need a tractor to draw,it can move forward by itself,my email is andy@htenma.com If you want more details from us,please send Email to me. Thanks and bes regards Andy
Hi,Benedict De Guzman,thanks for your enquiry. For designing the corresponding model to you,could you please send us a draw of your canal form ? My email address is : andy@htenma.com Thanks And Best Regards Andy
A trencher can do this much faster ! ... we make 2 models of canal trenchers in California ... our Eagle 6300 and Eagle 7300 ... check out www.EagleTrenchers.com
Hi. Ingrid, thanks for your enquiry. For designing the corresponding model to you, could you please send us a draw of your canal form ? My email address is : andy@htenma.com
![[🔴LIVE] งานประกาศรางวัล MAYA TV AWARDS 2024 : มายามหาชน](http://i.ytimg.com/vi/nwmWYXXVwBY/mqdefault.jpg)
From the 50s thru the 1980 in the US this method was used as well as with wheel trenchers to excavate ditches. The wheel trencher pulled a trapezoidal form behind instead of a crumbed bar that cut the slope. Once you graded the ditch line you used various systems to stay on grade while cutting ditch. Once the ditch was dug a form very similar to ''tis was dropped in the front of the form was larger than the the rear by the thickness of the concrete used to line the ditch. The center of the form was open and concrete was fed into the opening. Vibrators on the back of the form consolidated the concrete and the form was pulled ahead. Our largest wheel trencher, a Garwood Super G, could cut a 6' bottom ditch. For the larger ditches a dozer with a winch and a short boom that helped to center the pull with the center of the ditch moved the slip form. Every 10-15' the finishers used a metal form to put in an expansion joint. The larger slip form could be configured for different trench bottoms by adding or removing spacers from the center of the slip form. The smaller slip form had a winch, like this one, that pulled against an anchor to move it forward. You should consider building your forms in an expandable configuration. You add a bolt together arrangement with a taller side to accommodate wider ditches. Build your form top as adjustable as well and sell expansion kits in sizes your customers may commonly need. Your main ditch has a 4' bottom and your branch ditches are 2' bottom so you remove your spacer to do so. Pipelines, wells, center pivots, wheel lines and lack of capital ended the hay days of these water projects in the western US. Good luck!
Very nice piece of work
Thanks
Good solution for drainage to prevent flooding, great tools.
Thanks !
It's Very Good Idea 👍👌👌
Very nice.....or interesting.....
Thanks,please send email to me : andy@htenma.com if you need price or more document of this machine.
As soon as you finish it, some guys build a boat to ride on it. They should've waited for the water though.
Haha,interesting ideal
Look at topography.....huge field is level already......can use gps automation system on bucket for repeat operations......OR
Just good operation by a real pro!
This is such a cleaver idea.
Labor is cheap over, that is why this is very economical for them
It is more economical than precast type (precast,you have to make it and cut,and pave)
It is more economical than precast way (precast method,you have to make it,cut it and pave it)
economically any easily function,super inventor
Thanks !
If only they had this machine in WW1.
Jay Somnath🙏
And same for concrete-- no rebar or screen for strength which they could easily lay in-Looks like maybe 3' per half hour with 3 + people and equipment and transportation-- they could make these 3' section offsite at a concrete yard with the water & mixers required and deliver 20 section per truckload- lock them with a simple integrated seal and move it along 3 x faster- AND if they needed to move the canal-- they had a reusable system to place elsewhere, when the farm got turned into residential or commercial. Better yet maybe stainless steel plate/fiberglass might even be cheaper.
Great tool amazing!
How does he know the slope is correct ?
Hello,San Francisco, the slope is decided by the concrete,it should be controlled 8-9 when making the concrete.
My Email is andy@htenma.com If you have any questions,please feel free to contact me.
He thinks you are asking about the sidewall angle - that is calc'ed by the type of concrete mix. This is "upgrading" an older ditch so the water slope is well known.
The machine can work on the unflat ground,it will move according to the trench that you dig.
You have to make the corresponding dith first,then put our machine into the ditch and it can pave.
@Dust storm C0Ming We sold one to India before
what pulled the concrete machine forward? That is alot of weight.
There is diesel engine to provide power and run the generator to drive electric motor.
very nice piece ....but how to apply level of bed profile levelling .. thsnks
thats not a canal .. .thats a small ditch for farming water supply
We also have bigger machine,it is made according to your draw.
good operator....
THAT IS GENIUS
You want a few of these canals going from the sea/ocean straight into the middle of the Gobi desert where they are growing that masive (like really massive) forest. Or rather, a bigger canal you can get a boat down, and then canals like this running off as "streams".
It can not get a boat down,can not do that big,it is suitable for farm land for irrigation.
I agree. My comment said you'd need a big canal (for the boat) and then these come off for irrigation (and so I mean, the smalls ones are not for the boat). Cool video btw. Thumbs up.
How would this canal be used for? It seems quite narrow
It is used for water drainage in the farmland or road side.
v nice
export your technology to other country
Thanks,we start export this year,I am in charge of internationsal promotion,my Email is andy@htenma.com
tuyệt
Thanks for your comment,if you want to know the price or need more information,please contact us through Email : andy@htenma.com
Very good
HI, Parimala, please send Email to me : andy@htenma.com or add my Whatsapp : 0086 18638556116
needs better automation with a conveyor so it can work continuously
Can you explain briefly?
Ammattimies puikoissa, pirun siistiä ojaa !!
Thanks !
peksa s zgbujZ😎🙂🙂🙂🙂🙂😎😎😎🙂🙂🤗🙂😎😎💜💛💛
kum
💙💚💚l
very nice
Thanks for your comment,if you want to know the price or need more information,please contact us through Email : andy@htenma.com
all they lack are the new clean exhaust and they are freaking golder
nice
Ridiculously slow process- if they had a simple conveyor transport for the dirt they could be 2x faster not requiring the 25 seconds per cycle of the repeated lift and dump. The operator can only do it so fast with repeated accuracy if the wedge scraper bucket was just pulled back constantly- it would be a much faster production.
Super old technology, sheesh
We need this in afg.
Hey Juau..Do you have the hearing protection? What?
❤
Machine need uprating 😄
L i k e !
This is so cool great work.
where can we get these...
doc johnny
i love it
Thanks,if you need further information,please contact us through Email : andy@htenma.com
That sure ain't stupid.
It makes me sad to see they are not wearing any ear protection.
This is China... they don't care about ear protection. They care that Americans keep spending American $$$ at Walmart though.
What? Speak up
No rocks in China?
If there is rocks,you have to use very sharp trencher to make the corresponding trench first.
Can we get it in india.
What is the price of this machine.
Kami tertarik untuk membeli alat ini,berapa harganya?
i dont think you can do 10 miles a day
The paving speed is around 1m per minute,accoridng to 8 hours working time one day,it can pave 400-500m.
Por favor me puede enviar la sección del canal en un dibujo, gracias
Why is trench material acting like concrete ?
JAMES Rivis because it is .
can u supply and give service support in India?what is the cost of Machine excluding freight + Delivery cost to India/Hyderabad?
time required to supply..
My email is andy@htenma.com
If you want more details from us,please send Email to me.
akuraju sudhakara babu orbital dam
orbital
dam
Yes,we can export to India and send construction workers to make the canal for you.
My email is andy@htenma.com
If you want more details from us,please send Email to me.
noice
Do you have anything similar to that but work on tractor pto?
This machine does not need a tractor to draw,it can move forward by itself,my email is andy@htenma.com
If you want more details from us,please send Email to me.
Thanks and bes regards
Andy
My email is andy@htenma.com
If you want more details or price from us,please send Email to me.
Indians will copy very soon.
ਜਮੀਨ ਵੀ 1000 ਕਿਲਾ ਚਾਹੀਦਾ
It also can be used for short canal
+Andy Xin ਧੰਨਵਾਦ ਮੇਰੇ ਕੋਲ 82 ਏਕੜ ਜਮੀਨ ਹੈ ਮੈ ਪੈਪ ਲਾਈਨ ਵਿਛਾਈ ਹੋਈ ਹੈ
+Andy Xin thanks brother what my land in 100 % pipe line system 82 acer in a punjab India
+Andy Xin thanks brother ਪਰ ਮੇਰਾ ਵਿਸ਼ਵਾਸ ਹੈ ਤੁਹਾਡਾ idea ਲਈ 10000 ਏਕੜ ਜਮੀਨ ਚਾਹੀਦੀ ਹੈ ਤੇ ਇਸ ਤਰਾ ਦੀ ਕਨਲ ਬਣਾ ਕੇ 100 ਕਿਲੇ ਦਾ ਇਕੋ ਪਲਾਟ ਹੋਵੇ ਤੇ ਇਕ ਪਾਸੇ ਪਾਣੀ ਪਾ ਕੇ ਦੂਜੇ ਪਾਸੇ ਡਰੇਨ ਵਿਚ ਪਾ ਦਿਤਾ ਜਾਵੇ ਫਿਰ ਦੂਜੇ ਪਾਸੇ 100 ਏਕੜ ਜਮੀਨ ਦਾ ਪਲਾਟ ਹੋਵੇ ਮੈਨੂੰ ਜਕੀਨ ਹੈ 4 ਬੰਦੇ 10000 ਏਕੜ ਜਮੀਨ ਵਿਚ ਖੇਤੀ ਕਰ ਸਕਦੇ ਹਨ ਕੋਈ ਮੁਸ਼ਕਿਲ ਪੇਸ਼ ਨਹੀ ਆਵੇ ਗੀ ਇਸ ਤਰੀਕੇ ਨਾਲ ਜਮੀਨ ਤਿਆਰ ਕਰੋ ਪੋੜੀ ਟਾਈਪ
🍺
Trench diggers
Hi,Benedict De Guzman,thanks for your enquiry.
For designing the corresponding model to you,could you please send us a draw of your canal form ?
My email address is : andy@htenma.com
Thanks And Best Regards
Andy
Ramiz zəka
A trencher can do this much faster ! ... we make 2 models of canal trenchers in California ... our Eagle 6300 and Eagle 7300 ... check out www.EagleTrenchers.com
A trencher only can trench the canal,how do you pave the concrete after it is trenched ?
with a concrete slip form paver .. in the same shape as the canal
Hello, I am interested on purchasing your water canal making machine.What is your email add?Thank you
Thanks! My email is andy@htenma.com
If you need this machine,please send email to me.Thanks and best regards !
Andy Xin how can i buy this mechine? Tq
Hello,Kuasa Jernih :
My email is andy@htenma.com 948211246@qq.com
If you want price or more details from us,please send Email to me.
Jak wyprostowac wgnioty na samochody osobowe
Hello,Kuasa Jernih :
First we need your canal draw to quote a price ,as the price is different a lot due to different sizes.
Thanks
And
How much does the machine cost?
Hi. Ingrid, thanks for your enquiry.
For designing the corresponding model to you, could you please send us a draw of your canal form ?
My email address is : andy@htenma.com
سلام. این دستگاه ها کجاست؟
در چین است
should not be concretized
HI,My email address is : andy@htenma.com
If you are interested in this machine,please feel free to contact me.
Thanks And Best Regards
Andy
Looks nice and neat. One question where is the control for the grade of the canal.