Pepe Tools Superior Ring Bender Demo & Review in HD
ฝัง
- เผยแพร่เมื่อ 8 เม.ย. 2015
- Jeweller Dave Wilson of www.celticdreams.co.uk/ demonstrates and reviews the Pepetools Superior Ring bender.
If you found this video useful, why not buy me a coffee ?
www.buymeacoffee.com/mailun
Thanks, Dave ; )
Want one ? Use the link below to buy direct from Pepetools. Guaranteed genuine. Use the code CELTIC at checkout for little extra discount. Dave ; )
pepetools.com/collections/new...
Thanks so much Dave! I just bought one and am about to use it but learned a few things watching you. As always, you're very helpful. Thank you.
Some of the new sets come with a set of Delrin dies too, great for soft aluminium wires. Dave.
Thank You so much. I just started ring making, and this review really educated, and informed me.
+GaminOnYa Its a useful tool for making rings. Also check out my video on making a ring, it may give you some ideas.... Dave.
th-cam.com/video/U4HbADoSVW4/w-d-xo.html
I bought one. It works great. I can even bend stainless steel flatwear to make rings (at least the thinner pieces). I had purchased a cheaper bender at first. This one is so much better.
Check out Pepetools RING SHANK BENDER for the thicker ones. Link below. Dave
pepetools.com/discount/CELTIC?redirect=/products/ring-shank-bending-tool#?aff=4
Fantastic video - thank you very much for sharing! I have never used a ring bender before and on various forums and groups I have always seen people mentioning them, and as dumb as it sounds I didn't know what for... This is one of the best information and learning videos I've ever soon!
+Mary McMillan Presume you mean "seen" not soon. Thanks for the lovely comments. I've waited along time to get my hands on one. I keep in regular contact with Pepe tools and I can tell you that a new version will be out soon, so watch this space for an official video. ; )
First 15 seconds of the vid and im already hooked. Great presentation/vid and well excecution of the review. Cheers!~
Perhaps check out some of my how to project videos. Greta fun to see how something is made. Thanks for the lovely comments. Dave
This was SO interesting, thank you! I bought a similar item online recently but it came without instructions. Now I know that it can be attached to a vice lol. I would never have worked that out. Thanks again. Susan 🌹
You are so welcome! Dave
Nice graphical display! Great vids!
Thanks. Dave.
I'm learning how to make rings, and it's already obvious that my ring-bending pliers don't have enough bending force for ring shanks getting over 1.5mm--especially when the ring is constructed of several pieces. Unless I want to hammer away on a ring for an hour, I'm going to to need a tool such as this excellent Pepe ring bender. Also I noticed on Pepe's product page, it now includes an 18mm mandrel and die, and a set of Delrin dies are also included--presumably to protect against marring rings with intricate designs. The die/mandrel sets are also nickel-plated now, which would protect against rust pits getting transferred into the work. It's pretty clear that if you're in the business of making rings for clients, this tool will quickly pay for itself. Once again, and excellent video review of an excellent product!
Yes indeed. Once you clamp it down, you can get much more force than you could with pliers. I find it also helps to keep the sides parallel too. Note on Pepe's site they also have some larger ring shank benders and also a wedding ring stretcher / reducer with integrated shank bender too. (hoping to get one of those soon, video when I do). Dave
As an update, I just received my Pepetools ring bender and mounted it to my bench, and just tried it out. The latest unit looks a bit different: the posts and dies are now nickel plated, which will prevent rust. The other parts are black anodized and look quite nice. There is also a set of 6 strong Delrin dies--which I suspect I'll used a lot--and I'll explain why. I found the nickel/steel dies often leave some tool marks--most notably when using the 12mm or angled die/mandrel sets. These tool marks aren't too deep and are quickly polished away. However, since I often polish or apply gold and designs before I bend the ring, I've found the Delrin dies are much easier on the surface. I can already see it's a very nice tool that will save a lot of time when making rings.
Awesome 👍 and good explanation the Pepe tools. Thanks
Thank you. Dave
Nice video, well done explaining how it works, thank you.
Glad it was helpful! Dave
Excellent demonstration! I purchased a Pepe superior ring bender and should have it this week. I'm wondering if I should heat the silverplate silverware before making a spoon ring?
Silver plate? What do you suppose is going to happen when you heat it? you will likely melt off the silver plating and make a mess. Much better to use sterling silver spoons and anneal them, you can then polish them up later. Dave.
You look like a young Anthony Hopkins! nice review, thanks.
Thanks for watching. Dave
I have the ring bender from other company and it works like a charm on thicker wires that I cant bend by hand
"Another company"... hmm...I think I know who you mean. David of Pepe tools actually invented and designed this tool, but sadly most of his designs simply get copied. Thanks for watching. Dave
@@CelticDreamsCoUk yes I remember reading one of your comments regarding this issue, I didnt know about it and already had ordered other machines from the same company. If I knew about it I would defenetly consider buying the Pepe tools ring bender instead of the other... Thank you ether way for reply and I enjoy a lot your videos! Take care
I just purchased mine today. I have a ring bender from another company, not quite happy with it. Looking forward to using this one
Have fun! Dave
Great explanation sir thank you!
Glad it was helpful! Dave
Meraviglioso!!! Grazie 😍
Thanks for watching. Dave
Thanks a lot
Thanks for watching. Dave.
what is the maximum thickness of sterling silver can I use? my spoon handles are quite thick, also is there a unit that includes bracelet size?
The thickness is (to some extent) determined by the size of the post you are using, as the smaller posts will allow a greater gap between the post and the die. Although a lot of people use this for making spoon rings, it's not really what it was designed for. As the name suggest it was designed for silver and gold for making rings (eg wedding bands). Pepe also make a more robust ring bender with a much longer handle and will bend pretty much anything. This is ideally suited to what you are doing. See link. Dave
pepetools.com/ring-tools/ring-shank-bending-tool
Hi Dave, Thanks for the great video, would the 60 degree die bend 2mm square wire? Thanks
Yes indeed,You can bend spoons and heavy rings. Better if it's annealed of course, to prevent it springing back. Dave
Bender looks great but thank you for saying about not to buy a cheaper version which I was about to do ; also verifying that it’s only best for silver or gold . So the question is what can I use to make spoon rings from silver pate and stainless steel cutlery , I’m using a mandril and vices but it’s so slow I need it ring and bangle size . Do you have any ideas ?
Yes Pepe make a ring shank bender which is more robust and bigger for more heavy duty items. Either on its own or integrated into a ring bender. See links. Mr Khan, community leader ? Dave
pepetools.com/collections/bench-tools-1/products/ring-shank-bending-tool
pepetools.com/collections/ring-tools-1/products/combination-ring-stretcher-reducer-bender
Hello Dave some time ago you had a video I can’t seem to find now where you clean your tool and put in a box now you put something in the box with your tool so they don’t get damage looked like a bag of salt what is it please the name so I can look it up thank you
Ah yes, "Silica Gel" . You get them in the packaging of electrical items and such. little paper packets look rather like salt, and they absorb moisture. I always keep them. You can get huge bags too, for use in your car, to stop the windows steaming up, or to remove condensation. Look on ebay or Amazon for "Silica gel" . Dave.
www.amazon.com/dp/B01LWW9Y6L/ref=sspa_dk_detail_4?psc=1&pd_rd_i=B01LWW9Y6L&pd_rd_w=f4EdF&pf_rd_p=45a72588-80f7-4414-9851-786f6c16d42b&pd_rd_wg=BryQo&pf_rd_r=V1SXYHPRA9FNA2KJ90E8&pd_rd_r=1e30ccce-901b-40d6-9cb3-6a4c0c424b8c&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzSTVCNlo5RzlEMEdOJmVuY3J5cHRlZElkPUEwMDc0NDQ5MjFWVjBRRk1XSUw4OSZlbmNyeXB0ZWRBZElkPUEwNjg3MDM3M0Y2V1JRSDZDWVhPVyZ3aWRnZXROYW1lPXNwX2RldGFpbCZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
Celtic Dreams Thanks Dave
good over-view..thxs
You're welcome. Dave
thanks
You're Welcome. Dave
Got me a Amazon knock off kit for 112$ American. My friend has the Pepe one. They both work the same.Next im getting the Ring Stretcher.
They probably do work the same, but here's the thing...
The guys at Pepe, have spent years developing their tools, designing and testing them. Then spending a fortune on machines and tooling to make them. After all their hard work, other companies in. China (and the UK) simply come along a copy all their designs, effectively stealing their sales income. and cashing in on Pepe's marketing, research and development.
I Have known and worked with the guys at Pepetools for many years, helping to test tools and demonstrate them. I've seen first hand the work that goes into them, but more importantly Ive seen the passion that Tony and son David have for what they do, their tools their company and their employees. It is a very genuine family business run by genuine and honest guys, who are passionate about what they do. And I can say with some conviction that there aren't many companies with such moral standards.
So every time you buy a copy tool, you are stealing income from the people who designed it.
sorry....Just my 10c.
P.s. want the ring stretcher? use the link below to buy direct from Pepetools, use the code CELTIC to get a discount, and I also get a small commission too. Thanks. Dave
pepetools.com/discount/CELTIC?redirect=/products/upright-ring-stretcher#?aff=4
Hello Dave, Wanting to buy a ringbender, I am no sure witch one is the best for me. The Pepetools or the Durston. Why did you choose for Pepetools (American) and not for Durston (British)? Is there a difference?
Long story... I was reviewing tools for "a big British jewellery tool supplier", and I suggested that they sell the Pepe Ring bender and Pepe Jump ring maker. Some time later they then started selling a "British made", ring bender and a "British made"Jump ring maker. Basically a British tool company (whom I wont mention) had ripped off several Pepe designs and copied their leading products. As such, when I was offered a jump ring maker from that certain British company (for free), I sent it back refusing to test a shameless copy. (...It even had a genuine Pepe blade in it !!). Disgusting.
I work very closely with Pepe tools, testing and helping to improve their tools, so I get quite annoyed when other companies then copy their work . So in my opinion, if you want the best then get the originals, Made in the USA by Pepe tools. Avoid Chinese fakes and British rip offs. In the UK Genuine Pepe Tools are sold by Sutton tools... If a tool is worth buying , then buy it from the people who created it. Dave.
www.bettsmetalsales.com/p-Superior-Ring-Bending-Tool?SelectMaterial=TOO&selectCode=TOOLSRM046
Hello Dave,
Thanks for your honest answer. This made it a lot easier for me to decide to order the real and genuine Pepetools Superior Ringbender. I hope it will be here soon. I can't wait to use it. Greetings from The Netherlands.,
I want one to start bending spoons.
Glad I've inspired you. Thanks for watching. Dave
I know this is an old video. But what size bolts would I need to bolt down?
That depends on what you are bolting it to, the thickness of your worktop, and weather you want to bolt through or screw down. Dave
Simples pratica como consigo compra la aqui no Brasil, abraço
Olhe para Pepetools.com e encontre um fornecedor no Brasil. Ou entre em contato com eles e eles podem enviar o item para você. Dave
pepetools.com/contact-us
Psychokinesis! hat's Funny.
Well..there's more than one way to bend a spoon. ; ) Dave.
Hi dear does this tool helps making gold jewelry??
This tool is a ring bender, for bending rings. silver and gold work well. Dave
@@CelticDreamsCoUk thank you very much for your reply.
I am a total beginner, I have silver plated spoons and still can’t seem to bend them with this product. Do you have to heat them up first?
Good lord no. You will destroy the plating. There is a much bettr tool for spoon bending, the ring shank bender, see the link below. Dave
pepetools.com/discount/CELTIC?redirect=/products/ring-shank-bending-tool#?aff=4
Hi Dave. Where can I buy this tool in U.K pls?
All my Pepetools come direct from the USA. The only UK current distributor is Betts Metals. see link. But if you don't see what you want, just get in touch with Pepe info@pepetools.com and and ask them, they will be happy to help. Dave
www.bettsmetalsales.com/catalogsearch/result/?q=pepe
Thanks Dave. Would make sense if you were the distributor, after all you’re the one doing a great job of promoting Pepe tools.
Much rather you made the profit! Just a thought!
I have discussed it, but the problem with these heavy tools is the shipping from the USA to the UK. Plus the import tax. So not (at present) a very profitable idea.Shame, as so many people ask me where to buy one. It's frustrating. Thanks for watching.Dave
How high of a apiece can I bend on this tool. If its higher than the die, will it bend evenly and also will it scratch the metal while you are bending it ?
The post are 18 mm high. So that's about the max width you want in order to get a perfect bend with all the material in contact with the post and die. Yes, you can bend wider material. In this case you should mark up the work accurately and once bent, flip it over and bend it from the other side. Hope this makes sense. Dave.
Thanks Dave. I appreciate your feedback. Love your videos by the way. :)
How can I tell the real PePe Tools vs the fakes? Thank you
Difficult without seeing them. But if you see something from China for $10 or so, then it's probably fake. Check out Pepe's site and look for your local distributor, and always buy from a reputable source. Dave.
how much the price?and where can I buy?
I don't know where where you live, or even what country. So not sure how you expect me to answer specifically. But you can buy direct from Pepetools. See link Dave
pepetools.com/collections/ring-tools-1/products/superior-ring-bending-tool?aff=4
can this bend size 8 square wire?
Square wire, yes indeed. But I'm not sure what you mean by "Size 8". Many people use the ring bender to bend spoons and forks to make jewellery, so it's pretty strong. Dave.
8 gauge square wire is what i meant to say
8 gauge wire is about 3.3 mm so yes that's absolutely fine., it will bend with ease. Dave.
Celtic Dreams Do you need to anneal metal before using it?
where can I buy this??
+Hollidae Perigan I don't know what Country you are in, so difficult for me to answer personally. But follow this link.... Dave.
pepetools.com/dealer-locator
Is it suitable for spoon bending?
A lot of people use it for that. But it's not intended for that. A much better tool is the Pepetools Ring Shank Bender. This is better for tougher and thicker material. see below, Dave
pepetools.com/discount/CELTIC?redirect=/products/ring-shank-bending-tool#?aff=4
dont know what they paid him for his review,but the one i recieved was out of square about 5 degrees,,the piston ,not square with the base...pepetools customer service told me i was too picky,wanting a quality tool for $335...you would most likelly get better quality from a $100 dollar knock off ,from amazon
I am just a jeweller reviewing a tool (which is very good), So perhaps don't take out your frustrations on me. I don’t sell them, and NO I did not get paid to make this video - not by anyone. If people buy the tool or don’t buy it, does not affect me as I don’t sell them. I am just sharing my knowledge with others.
But in a spirit of openness, I have published your comment. I must say that your description of the product I find very surprising. I have many Pepetools items and I have seen first hand the standards, the state of the art machinery and extreme tolerances they work to at the factory. The tool in my video is a genuine item direct from the factory and as you see the quality is superb. I'm not even sure how Pepetools could make something as you describe which is so faulty - as they work in small batches I just don't see how that could even happen. However, I am aware that there are a lot of fakes and copies on the market, which do have the poor quality issues you mention - especially fakes from China. Unless you bought it directly from Pepetools, via their official website, then I would strongly suspect you bought a fake.
Your alleged response from Pepetools is also surprising, they are a family run company and are ‘genuinely’ nice decent people. I personally know they do many "very" generous acts to support charities, groups and individuals. I've known them for years, I can't imagine they would make such a sarcastic comment, degrading their own tools. I can't see any company would say something like that - Unless of course they knew you bought a fake.
This is not the only video on this tool and the others appear to be favourable ones. Perhaps you could make your own review video showing the tool you purchased, highlighting the issues and explaining where you got it from? Surely that would be helpful to other viewers. Dave
This bay form eBay?
You do see them on eBay very occasionally, but not many. You really need to to go to a jewellery supplier. To find your local dealer check out Pepe's website. Dave.
Necesito uno juego de piezas Pepetools ok necesito un juego
pepetools.com/?aff=4
Thanks, Dave
Price for the tool
See the link in the description for the latest prices. Dave
what is the price
Hi. Obviously its impossible to give you a price in your own currency, as I don't know where you are. But here in the UK it retails for £199. To find your local retailer check out Pepe's list of dealers.... Dave. www.pepetools.com/dealer-locator
295 USD amazon
Made in USA...
Indeed. All Pepe tools are designed and manufactured in the USA. Dave.
There is no spoon.
No there isn't. It's not a spoon bender and that's not what it was designed for. For bending spoons you should consider the Pepe Ring shank bender. Much larger and more leverage, designed for thicker materials. Dave
pepetools.com/collections/ring-tools-1/products/ring-bender
WD 40 only good for 3 months then reapply
A valid point. for long term storage I'd probably use something thicker like grease. But when in normal use, a quick spray is very easy and works well for me, to clean, lubricate and protect. Dave
280$ sell and 89$ shiping in greece.WTF?
Pepetools are made in the USA, so I guess shipping to Greece is expensive, same here in the UK we also have to pay import duty and tax. For heavy and expensive items it can really bump up the cost of buying tools from the USA. Either way, its worth sending an email to pepetools and asking them if there is anything they can do. Perhaps they can ship it differently. I'm sure they will do what they can to help. Dave
Explaining how it works is like explaining how a wheel rolls and if anybody needed that information they needn't bother trying to purchase/use this or anything with wheels in their life because it's pretty obvious
The idea with my channel and the videos is to explain "everything" even for a beginner, and allow fellow silversmiths to make an intelligent and informed decision before buying a tool. I guess not everyone has your superior intellect. Dave
goto 3:00
see the rust stain coming from under the center sliding piece ? The brown stripes. That usually means a cheap (non stainless / non brass) spring that is already rusting out. Send it back while it still has a warranty.......
Yes. Old video. But useful information anyhow to apply to a new device. Notice this is near new & came with an anti rust greasy layer. But there is something out of sight producing rust - the one and only breakable part.
* * I have published this comment,as you are completely wrong.* * The brown marks you see are "brown grease", a thick sticky grease applied to the piston as it is a moving part. It also helps protect the item whilst in transit.
You imply that anything not made of brass or stainless must be cheap. Why ? Give the guys at Pepe some credit, the guys are professional engineers, born and bread. All the products go through months and sometimes years of testing and designing before going to market. Obviously the item is not brass, that would not be strong enough, stainless, likewise does not have the correct hardening properties. Its made from carbon tool steel which is then hardened. Pretty much the same material as every other metal tool in my workshop. Pliers, files, bench tools, vice, etc are all hardened carbon steel. I don't have any brass pliers, and i don't have any stainless steel files. Hence the name "tool steel". I live by the sea in the very wet and damp north of England, - a highly corrosive atmosphere. Outside, metal garden furniture will last a year before disintegrating. But in my workshop, my ring bender is fine....and there is no need to send it back. Dave
Looks like i goofed then...
Apologies all round. Fell free to wipe me from the comments.
Just going on what I have seen in the past......
Peace all..
I have been a goldsmith for over 20 yrs both using traditional methods as well as modern production like cad and 3D printing and am a bit of an gadget freak but I think this tool is totally unnecessary takes about as much time to set it up as doing it by hand.
Thanks for the CV. Perhaps not everyone has your vast experience and skills. I've only been making jewellery for the past 19 years, so as a beginner I find tools like this very useful. Thanks for watching.Dave