add a Subwoofer factory stereo camry 2012-2014
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- click here for my recommended line out converter Amazon affiliate link amzn.to/2G5DOTI
this video was done on a toyota camry non premium sound system the wiring color codes should be the same for the premium system also though
how to instal an amplifier
• How to install a car a...
Finally a video that told me what I needed to know about the remote turn on wire and which wire to use 🙏🏽
wow very great video especially showing and describing every single step and detail, which many other people skip over
thank you so much
For those that have amplifiers with auto turn-on, all you need to do is tap one of the rear speakers for signal if it's a subwoofer amp. There would be no need to remove the radio because the amp will turn on automatically when it receives audio input. It will also shut off after a minute or so once it loses the audio signal.
you can do this wiring in the trunk right at the speaker so you don't have to tear apart your dash
djtonyc77 how do you do it
How??
You just crimp into the speaker wires the same way except you don't combine the right and left wires, you connect to each one. Then you take the remote wire and run it to the cigarette lighter fuse in the fuse box. Make sure to keep the wire on the protected side of the fuse though, not in the middle
True, BUT the wires are stripped. Or mine are at least. Theres no color and I don’t know how to differentiate them without one of those pen things
can you post a link for how to run the power wire to the amp? like where is the best point of entry on the firewall. thanks. tried clicking on the link above but it doesnt work
I watched this video over and over again and it was very helpful. Positive wires from the LOC taps to that red right-rear positive wire of the factory HU. While the negative wires from LOC taps to the rear left thicker white wire of the factory HU. The blue wire remote from the LOC taps to the thinner gray wire of the factory HU.
Since my amp is 150 watts, can I tap my 8 gauge red wire to the positive wire of the cigarette lighter? Don't like going thru the firewall to connect to the battery.
+Dan alcantara Tha KS glad you liked the video. I would say not to tap into that circuit.. You will most likely blow a fuse very often and also heat up the factory wiring. It is to thin to be able to transfer current that fast to an amp. Run strait to the battery is the only way i would feel safe Installing an amp
connectedcaraudio yes I finally found the firewall going to the battery terminal by the engine compartment. Thank u again for the video! It was very helpful along with the other video for my specific Camry!
cocosmoothy69 use the red t taps for the speakers wires, they are the correct tap for that speaker wire.i tried to reply to you directly but i cant comment on a linked comment for some reason
Can you tap into the speaker wire for the speakers behind the back seat headrest in a 2012 Camry?
Where can I get the LOC from? I only seen ones that can't have the factory harness connected to it.
click here for link to my recomended line out converter amzn.to/2G5DOTI
what tools do I need to do that to my 2016 Camry
If anyone can tell me if this is the same process for the 12-14 Camry with the jbl greenedge sound system that would be super helpful!
Did you ever find anything out looking to do it to mine
Awesome video!! The cleanest install without cutting anything. Will this work for a 2014 corolla? Same colored wires?
You obviously missed it...he cut the harness speaker wires!
@@pancellorum1 You're obviously are blind.
He didn't cut any wires, he tapped into them, there's a difference.
I see a couple people talking about not working and noise.. does it really work? It looks like we have the same car.. first time putting it together myself
So my loc is an axxess-mloc720. What do I do with all the other wires out side of the pos and negs? Am I doing something with them?
I have the same car, You basically showed how to add 1 set of RCA's what if I want to run another set of RCA for my component speakers, how would I do that ??
your going to want to tap into the front speakers of the toyota factory harness the wiring diagram is below
take the left front positive of the line out converter wire which is white and connect that to the left front positive of the toyota factory stereo harness (pink)
take the left front negative wire from the converter which is white with a stripe and connect that to the left front negative wire on the factory stereo harness which is (purple)
take the right front positive on the line out converter which is grey and connect that to the right front positive on the factory stereo harness which is (green)
take the right front negative wire from the line out converter which is grey with a stripe and connect that to the right front negative on the factory stereo harness which is blue .
also make sure to watch my factory stereo wiring diagram video it will help you .
th-cam.com/video/mVnIB8P0XuQ/w-d-xo.html
toyota camry stereo wiring diagram
12 volt constant ( blue with yellow stripe )
12 volt ignition switched ( thinner gray wire )
ground wire ( brown )
illumination light ( thinner green )
dimmer ground ( thinner white )
speakers
left front positive ( pink )
left front negative ( purple )
right front positive ( green )
right front negative ( blue)
left rear positive ( black )
left rear negative ( yellow )
right rear positive ( red )
right rear negative ( white )
toyota camry factory stereo wiring also includes speaker wiring
If you found the video useful please hit the "like" button
Car Audio / Car Meets Can't I just hook up an aftermarket radio and put it in my glove compartment? and then just put the RCA's into that radio?
Car Audio Videos just the thought of opening it and there's a car stereo with wires lol
yeah i know, but i wanna add a after market amplifier and subs to my system
Is it the same process for a 2015 Toyota Camry se ?
It should be if it's the same generation.
So I did this same set up and it worked the first time then I buttoned it all up then the radio won't even turn on! I have a 2014 corolla
+Hunter Snow che k all the fuses to see if you blew one, replace it if blown. If it happens again check your wiring to see if you have something shorted. Also check the fuse behind the radio
Do I need to plug in the yellow for power?
Where is the links for the tools to buy on Amazon ?
click here for my recommended line out converter amzn.to/2G5DOTI amazon affliate
I can't see where the guy splice wires to install the line output converter.
is there a chance the amp and subwoofer could short out the factory stereo from the extra watts?
That's what I was wondering, won't the extra power fry the smaller stock wires?
Do you have it for the 2019 Toyota sienna se.
can the T-Tap be any AWG?
So I would like to know how can I connect a subwoofer directly to the speaker that are in the trunk
You cannot directly connect you have to use an amplifier. Your only tapping into the audio signal from the speakers. You need an aftermarket amp to power the subwoofer
You can jump off of those but its not gonna beat the trunk off but it definitely sounds better than stock I have two 12s running on my back 6x9s and its decent but a amp is the way to go
i can do it to a camry 2008 with jbl and amplifier of fabric
Whats the link for that loc
here is my recomended line out converter amzn.to/2G5DOTI
Do you tap the right or left speakers? Or does it matter?
It doesn't matter
connectedcaraudio Why do you tie the pos and neg wires together? Is it better to connect two to the left speakers and the other two to the right speakers?
Dee Jay because subwoofer are mono they don't need the stereo left and right separation like vocal speakers, you can just tap into left or just the right. If I was adding amps to a 2 channel amp for vocals I would tap each speaker but for subs it is not nessasery.
connectedcaraudio And why is it better to tap into the rear speaker wires rather than the front wires? Thanks a lot man.
connectedcaraudio One last question, which wire would I have to tap into that would turn on the amp only when the radio is turned on rather than when the whole car is turned on? Is that the gray wire that you are tapping into?
Where do you buy those taps? Thanks
Sorry late response. EBay and Amazon is where I get them. T taps by company called 3m
connectedcaraudio No problem! Thank you very much
One problem with tapping just one rear speaker is the fact that I hear a lot of music with stereo bass that pans back and forth between the speakers. If you tap into just one, every time the bass pans to the other speaker, or you're playing and old Beatles song that had bass in only one speaker ( the one you didn't tap into ) you'll lose your sub bass. This sounds like crap when it's panning back and forth.
Kevin McWilliams i think thats exactly what happened to my 2007 camry years ago.....sound was shi**,
Now I've got 2012 aurion,wanna put sub, someone told me i have to install aftermarket stereo,
And i dont want to do that as this Toyota stereo is good,
Ya I have few songs that have bass on one side or the other, you’d only get it from the one side? Am I missing something?
Think you’d have to hook up pos right to pos right, neg right to neg right, same on left to get full bass for each side? There’s a switch on my amp that would play vocal and bass or just bass so would you not have to hook it up that way so you get bass from both sides ( bass if only on say left or right)?
bass should be in mono if the song has bass panned left and right then they mixed the song poorly
This is why you tap the rear speakers at the trunk individually
What LOC is that?
Also for the t-tapps what gauge do i need to fit this 2012 camry speaker wires?
It's made by a company called axxess.
carbonsnak3 use the red T taps
This method did not work for me, on my 2012 I had to tap into the multi colored harness
Don't cut the red wire lol 😀
James Langill did or does your Camry have the jbl system? I'm wanting to add a sub to my 2012 Camry xle with the jbl greenedge system and I need to know what wires to tap into
@@deft1abc1 This is a long shot, but did you ever figure out how to do it? I'm looking to do the same thing and am tapping the rear speaker wires but it's not working.
@@Calethir I ended up tapping into the factory subwoofer output coming out of the factory amplifier under the driver's seat. It was a big pain in the butt looking up random diagrams on Google to figure out which wires went to the sub.
@@deft1abc1 I really appreciate your reply. I've done the same and my sub's still not working and I'm at wit's end. I found the diagram I need, but it's still not working for me. Anywho, I really just wanted to say I appreciated you reply. Quite kind of you.
This video is useless if your Camry has the anything other then your basic radio