Laying floor in a Cargo Trailer! My first attempt!
ฝัง
- เผยแพร่เมื่อ 29 ส.ค. 2021
- etrailer etrack
www.etrailer.com/E-Track/etra...
flooring
amzn.to/380d2XX
#rv #towing #trucks
Wife’s channel: / mrsbtbrv
Instagram: / bigtruckbigrv
Facebook: / bigtruckbigrv
Links to many of the accessories I review and use from etrailer!
www.etrailer.com/infm-big-tru...
RV Towing Upgrades
*Reese Goosebox Gen2: www.etrailer.com/Fifth-Wheel-...
*B&W OEM Gooseball: www.etrailer.com/Gooseneck/B-...
*B&W Fifth Wheel Hitch: www.etrailer.com/Fifth-Wheel/...
*B&W Sliding Fifth Wheel Hitch: www.etrailer.com/Fifth-Wheel/...
*Equalizer Weight Distribution Hitch: www.etrailer.com/Weight-Distr...
*B&W Tow and Stow Hitch: www.etrailer.com/Ball-Mounts/...
*Curt Drop Hitch: www.etrailer.com/Drop-Hitch/C...
RV and Trailer Equipment Upgrades
*RoadArmor Suspension Equalizer: www.etrailer.com/Trailer-Leaf...
*HD Shackle Straps and Wet Bolts: www.etrailer.com/Trailer-Leaf...
*RV Suspension Upgrade (travel trailer, Cargo Trailer): www.etrailer.com/Trailer-Leaf...
*16” G Rated Wheel Tire Combo: www.etrailer.com/Boat-Trailer...
*Goodyear Endurance 15” Trailer Tire: www.etrailer.com/Tires-and-Wh...
*Goodyear Endurance 16” Trailer Tire: www.etrailer.com/Tires-and-Wh...
*Furrion Wireless Backup Camera: www.etrailer.com/RV-Camera/Fu...
*Furrion Wireless Side and Rear Cameras: www.etrailer.com/RV-Camera/Fu...
*Phoenix Electric Trailer Jack 4,000 lbs: www.etrailer.com/Trailer-Jack...
*GlowStep Revolution Steps: www.etrailer.com/RV-and-Campe...
*LCI Solid Steps: www.etrailer.com/RV-and-Campe...
*LCI AutoLeveling System: www.etrailer.com/Camper-Jacks...
*Reese Fifth Wheel Dual Motor Landing Gear: www.etrailer.com/Camper-Jack/...
Must Have Equipment!
*6000 Watt Generator Kit: www.etrailer.com/Generators/e...
*3200 Watt Inverter Generator: www.etrailer.com/Generators/e...
*2000 Watt Inverter Generator: www.etrailer.com/Generators/e...
*30amp to 50amp Power Cord: www.etrailer.com/RV-Wiring/Mi...
*LED RV Replacement Taillights: www.etrailer.com/Trailer-Ligh...
*Fastway Tire Chocks: www.etrailer.com/Camper-Jack/...
*RV Foam Sprayer: www.etrailer.com/Car-Cleaner/...
*RV Soap: www.etrailer.com/Car-Cleaner/...
Truck Upgrades
*Airlift 5000 Airbag Kit: www.etrailer.com/dept-pg-Vehi...
*Airlift Wireless Air Controller: www.etrailer.com/Accessories-...
*Access Toolbox Bed Cover: www.etrailer.com/Tonneau-Cove...
*Bedrug Bed Liner: www.etrailer.com/dept-pg-Truc...
*Floormats: www.etrailer.com/s.aspx?qry=F...
*Etrailer.com is the official sponsor of my channel. Equipment reviewed may have been provided by them as part of that sponsorship. All reviews are honest and unbiased. This channel is for entertainment purposes, and you should always do your own research prior to making a decision!
Sponsored items may be in this video. Always research multiple sources before making a purchasing decision. As an Amazon Associate, I earn commission from qualifying purchases. - ยานยนต์และพาหนะ
![แม่กลองสองใจ - ซีแกรม โตเกียว มิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/GSQfVjcr_f4/mqdefault.jpg)
Turned out very nice. Most of my projects have "happy little accidents" too, no big deal...
Great job. Enjoying these videos very much. Some great money saving ideas.
Looking good!
Looks amazing! Only nit pick is that you re-installed the rear tie-downs (closest to the door) backwards. Sorry, OCD!
Yep. Noticed that also. Hot day
Looks good and definitely helps with cleaning! Only concern I would have though is this…my dad had bought an outdoor building and put down rubber mats for easier cleaning also. After a year or so, we noticed how much moisture was being held underneath of it due to temp change. We ended up pulling it up to keep the plywood from rotting.
We just picked up a 7'×16' enclosed trailer. I'm thinking of installing flooring. Great video. Thanks.
Nice job JD. Much improved
I was waiting for those D ring bolts to be solid rust under the trailer…. Oh yeah I live in MI and your in TX 🤣🤣🤣
after watching this, I thought maybe if some material went up the wall a little it would create a bathtub to manage any fluid leakage.
Looking forward to the next video. Great dance moves by the way. Ha
Awesome! You gave me some great ideas 💡 for my cargo trailer.
Great job! I'm about to upgrade my cargo trailer and your video helped me make up my mind on which direction I wanted to go.
That was quite an effort in that heat and humidity! Hopefully it cooled off in the evening but you were so soaked by then you didn't notice. Mid 60's in Anchorage and beautiful sunshine but was 48 and rain last Friday, I got cold and soaked in just an hour installing an exterior door.
Looks great, with your scraps possibly put it a toolbox as a mat.
Good looking. Just a heads up. My biggest mistake I made in my trailer was hanging too much weight from the ceiling joists in the wrong place. Hung a ladder 16 foot, double aluminum, in such a way that it twisted the frame enough to allowed the roof joint to gap and allow water intrusion.
My 28’ trailer has a hard spray in liner like used on the bottom of air-boats. It goes up the walls about 6” and makes pressure washing it out now very nice.
I was wondering if a spray in bed liner (Linex, Rinoliner, et al) would have been a good choice. Not going to be as inexpensive as the rolled vinyl but maybe $250-$300 or so. Less area and easier prep then for a truck bed.
@@jeffo1108 I’m sure it would work well. I know someone that had the floor of his pickup sprayed with bedliner spray. He says it’s much easier to keep clean than the carpet was.
Another great vid!
Templet. Next time make a templet. So much easier!!!
This something I hate when a contactor does is change what product they uses half way threw a project without knowing if one is better than another. In some cases they are as good others there not. Yes I'm being picky so take that with a grain of salt. Thanks for making the video as it's helping me with Ideas for a future project I'm planning. I can tell you if E-trailer is as good as they were in the past they are great to do business with!
Two words: Cardboard Templates
Yes, I realize that's my OCD talking, but it would drive me absolutely crazy to have miss-cut the angles so badly. I'd have worked from the front to the back since a strait cut across the back would have been so much easier.
Great video! The trailer looks Great 👍 I love the rubber material and tracking system that you have installed. Multiple attachments for securing the load are important given the diversity of cargo that will need secured property in transit.
I have a toy Hauler that I want to add some tracking and hanging storage to for straps and other stuff needed but don't have enough cabinets to accommodate all of the stuff I end up loading into it while I'm traveling to camp spots in Washington State and further out in the region in future exploration of scrounging state of the PNW.
Thanks for the very knowledgeable and useful information you deliver in your videos and
HAPPY CAMPING 🏕 😁
My toyhauler has E-track in the rear. Two different levels on each side and two on the floor. The possibilities are almost endless. I like the 2x4 brackets for making shelving side to side. I have even made sleeping bunks using them along with some plywood.
I'm sure you aware of this but thought I'd share I put etrack on my walls as well and I didn't like those edges of the Etrack that stuff will take your skin right off if you run in to it. I found on ebay they make Etrack ends. Simply loosen up the end screws and slid it under the Etrack and tighten back down. I think this would be a great add on to your project even on the floor since the Etrack isn't recessed. I wish I had a way to send you a picture of these pieces!
Just an FYI from an old quilter, a diagonal line hides better than a straight line. Your eye wants to follow a straight line so you “see” it whereas a you eye doesn’t want to follow a diagonal.
Next time open the side door and put a fan to cool you off fresh air pass thru will help big time 👍👍👍👍
This project is really coming together well. I’m looking forward to seeing the finished result.
What do you plan on hauling in this thing?
great video, once again, it's nice for us to see you're only human and are not too proud to hide your mistakes.... look forward to the finished product .. peace.
Just a thought and I don't know if it would make an appreciable difference but have you considered insulating the ceiling and covering with luan? Being in TX it may help with heat rejection with the sun beating down on it all day. 🤷♂️
I’m building out a 7x14 for two motorcycles and a drop down bed . Have you ever used epoxy paint for flooring? We did a vinyl floor on another trailer and it started coming up a few years later
Hi, do you have a link for the mat that is on the ramp? It looks like a nice texture. Nice job!
Any updates on how that floor is holding up? Any bubbles? Pulling up anywhere? Have you had your ramp open out in direct sun. I did mine few years back (with different adhesive) and ramp was impossible in the sun - 10 mins and bubles everywhere
Are you going to add a gap cover between the trailer floor and the ramp/door? I'm thinking that you did that on your other cargo trailer?
It's been a year since you installed the flooring, how's it holding up? I have a customer that wants something done to his trailer. They have a Mini Cooper that will hauled in the trailer, need something that will hold up to that. Looking at flooring or painting options. Thanks
You should have reached out to one of your friends that does carpet/ linoleum!!! .
The two tie downs at the rear are in backwards. The four points should be pointing towards each other (the center of the trailer). Think tying down a motorcycle, the ones in the rear would be pulled back against their hinge point.
How has the spray Locktite held up? Wondering it it’s strong enough to keep the floor down when loading and unloading an ATV.
It's been ok. The etrack that's on the floor likely plays a large part of securement.
@@BigTruckBigRV yeah, I am going to be installing E-Track over the flooring as well. How is the actual floor holding up?
I thought you had an A/C unit in that trailer?
Epoxy paint with grit vs Rubber mat flooring… which is better?
Rubber flooring made for trailers with adhesive made for tailer is better than epoxy but expensive! Epoxy would cost just as much as his project did and probably last longer with less problems but idk maybe he gets lucky. The thing with trailers is they get HOT 🔥 so you need adhesive that can handle that as well as flooring that won't stretch or melt I've seen people cheap out on doing the floor and they end up with big problems down the road so if your not willing to spend the money on good adhesive (it's like $300 for 4 gallons) and good flooring from a company like G-floor than just do the epoxy
Are you still planning on a workbench in front?
Yes sir.
We sincerely hope to be able to cooperate with you for a long time, and hope that you will reply to me by email. grateful
Am I the only one who noticed the chrome, non impact socket
Yes but for what he was using it there is no need for an impact rated one.
Looking good!