Thanks for watching this video! No one likes a "Jerk"! Glad to get rid of jerkiness on this tractor. Fore more videos be sure to Like, Share, and Subscribe. Thank you for saving the tractors!
ADDITIONAL SOLUTION! I also found that I had loose bolts where the differential attaches to the frame. This allowed the front of the Hydro to move substantially and cause jerking. I first replaced the damper and removed all play from my linkage but It still jerked. After tightening the 4 bolts, it now drives very smoothly. I hope this helps someone.
One thing I would like to note to most people, is that the location of the dampener is on a “series 4” tractor (don’t know the year for the change, but I know for certain after 1988). All others, prior will be within the dash tower next to the handle for the hydrostatic drive control. This applies to 316, 318, 322, 332, 420, and 430. The one that he changes could very well be an optional or secondary shock that came on these, but I haven’t confirmed that yet.
Hey Norman! You are really catching on in the GT world! What is the part number? I have a 317 that only jerks in reverse. I am getting ready to remove the pan and have a good look at it and change the fluid and filter. Thanks!
I have a 1987 John Deere 420 garden tractor. The transmission seems jerky at takeoff like you mentioned here but it also surges relentlessly. For example, just driving down the driveway in low speed half throttle it’ll nearly jerky right out of the seat. Could this same type of thing be causing that. The food was changed last year and filter and the level is correct. Any input would be appreciated.
I purchased a JD 420. The hydro jerks. I changed the damper and took most play out of the linkage. I have replaced the trans oil and filter. It is still jerky. It does take off when you push the lever up, but it just doesn't stay steady. Oil level is correct. Any suggestions?
Ok so I have a question I have a John Deere 300 so I have to use the lever you were using in this video to move the tractor but when it gets worked up it won't stop moving I have to drop the plow to keep it from moving and sometimes that doesn't work can you help?
I just bought a 317, would this be the problem if it doesnt seem to want to go as fast forward or seems like there is a lag in getting it up to higher speed when pushed all the way forward? Or what could be the problem? It shifts smooth forward and reverse. Another question entirely, related to the steering, if there is a lot of play in the steering like a 1/4 to 1/2 steering wheel turn before tires turn thoughts on what that could be? Thank you for your great videos.
I have John Deere , but i don't know what model i found a ser, # on it that reads ( C314J 121098M ) . Does the C314J mean it is a 314 ? Thanks for any help.
Would a Cub Cadet 149 jerky hydro be as simple as this to fix? When i raise the Hydro lever sometimes the tractors jerks to HIGH SPEED lol. Same thing is reverse.
Hmm that's interesting. Your friction disc may be worn. Instead of getting a new one I suggest tightening it up with a different material. I had this plastic type packaging that came with some tools that I use on the cub cadets and it works great
can someone tell me how fast, top speed (mph) a 316 can go? i i was just curious. and they all should of had a o.e hour meter? correct ? mine is missing. this 1984 model was given to me they think is a blown head gasket cause it smokes bad and runs bad. my brother had given me his d110 that had to same problem and i fixed it and sold it for 400.00. and on that one i can see why in the blown spot and with my research the head does not bolt down exactly evenly around the piston. i am looking forward to working on the 316 and learning about the small engines. i also have an old murray 5 hp ride mower 1969 model the neighbor gave me i would like to restore to a certain point. along with the jd 316 , i was a auto technician for 23 years....no more and like the idea of working withe small engines and riders. i love watching all the john deere videos and learning all i can thanks to all you john deere guys for posting your videos!
@@Isavetractors I need the OEM part # if you have the time. Greatly appreciated. JD tractor stores started new program for part search. Took 45 mins to find mower blades for 316! Crazy.
When my grandpa and i picked up a cub cadet hydro garden tractor we decided to pull it and halfway the tractors hydro broke and we replaced the plunjers and he is going now and it drives nothing happend
Thanks for watching this video! No one likes a "Jerk"! Glad to get rid of jerkiness on this tractor. Fore more videos be sure to Like, Share, and Subscribe. Thank you for saving the tractors!
Great video
I learn something new every time I watch your videos. Thank you
Thanks Norman! Always appreciate your instructional videos!
Nice job Norman on the 316, that a great little tractor.
ADDITIONAL SOLUTION! I also found that I had loose bolts where the differential attaches to the frame. This allowed the front of the Hydro to move substantially and cause jerking. I first replaced the damper and removed all play from my linkage but It still jerked. After tightening the 4 bolts, it now drives very smoothly. I hope this helps someone.
That has to be one of the stouter looking garden tractors from that era. Built like a tank.
One thing I would like to note to most people, is that the location of the dampener is on a “series 4” tractor (don’t know the year for the change, but I know for certain after 1988). All others, prior will be within the dash tower next to the handle for the hydrostatic drive control. This applies to 316, 318, 322, 332, 420, and 430. The one that he changes could very well be an optional or secondary shock that came on these, but I haven’t confirmed that yet.
Most 316’s have dampeners behind the dash. The one by the hydro are rev-4. It’s a good upgrade for people with the earlier versions on 300 series.
i just picked one of these up, great to see i'm not the only one...
Might be getting a 316! This will help a lot!
Nice job and video Norman always learning something new thank you
You should do a video explaining which are the best classic John Deere compact tractors.
Great information Norman, thank you very much
Excellent video and explanation!
Hey Norman! You are really catching on in the GT world! What is the part number? I have a 317 that only jerks in reverse. I am getting ready to remove the pan and have a good look at it and change the fluid and filter. Thanks!
I have a 1987 John Deere 420 garden tractor. The transmission seems jerky at takeoff like you mentioned here but it also surges relentlessly. For example, just driving down the driveway in low speed half throttle it’ll nearly jerky right out of the seat. Could this same type of thing be causing that. The food was changed last year and filter and the level is correct. Any input would be appreciated.
I purchased a JD 420. The hydro jerks. I changed the damper and took most play out of the linkage. I have replaced the trans oil and filter. It is still jerky. It does take off when you push the lever up, but it just doesn't stay steady. Oil level is correct. Any suggestions?
Thank-you very informative appreciate the video
Where did you get the new piston?
Smart design!
Ok so I have a question I have a John Deere 300 so I have to use the lever you were using in this video to move the tractor but when it gets worked up it won't stop moving I have to drop the plow to keep it from moving and sometimes that doesn't work can you help?
Great video. I own a 316 .
nice fix on that!
I just bought a 317, would this be the problem if it doesnt seem to want to go as fast forward or seems like there is a lag in getting it up to higher speed when pushed all the way forward? Or what could be the problem? It shifts smooth forward and reverse.
Another question entirely, related to the steering, if there is a lot of play in the steering like a 1/4 to 1/2 steering wheel turn before tires turn thoughts on what that could be? Thank you for your great videos.
Chck your fluid and filter first it
If it’s low it might do it
Have you ever worked on 116 lawn tractor s be for
how do you bleed steering cylinder on 400 JD
Do you have one for a Simplicity 7117? Thanks.
I just looked at my recently purchased 'jerky'140 1972 JD but there is no dampener. ????
Wish there was a way to fix the jerking on a JD212
What is the part number for damper
I have John Deere , but i don't know what model i found a ser, # on it that reads ( C314J 121098M ) . Does the C314J mean it is a 314 ? Thanks for any help.
What's it say on the hood?
Would a Cub Cadet 149 jerky hydro be as simple as this to fix? When i raise the Hydro lever sometimes the tractors jerks to HIGH SPEED lol. Same thing is reverse.
Hmm that's interesting. Your friction disc may be worn. Instead of getting a new one I suggest tightening it up with a different material. I had this plastic type packaging that came with some tools that I use on the cub cadets and it works great
How much weight can you pull with John Deere hydrostatic
@isavetractors what was the part number for this?
I have a sears ss18 garden tractor with a onan BG-MS engine? I was curious where can I find a replacement air filter for it?
We might have them. Send us your current filters, dimensions. ID, OD, and Height.
@@Isavetractors ok here is the ID of the foam filter 140-1259
Give our office a call for further assistance
Where did you get the dampener ?
John Deere OEM $$$
Any clue where I could pick up a mower deck or a whole front bucket?
Look on Facebook market place
For that I look for mowers and stuff there
Do u guys sell parts for onan bf/ms motors. I have a sears ss16 and I need a coil for it
Not yet, but we will. 2019 we are making lots of parts for Onan engines. Stay tuned to our website and follow us on Social Media for updates.
I have a ark 500 loader what oil should I use
Use a universal hydraulic fluid.
can someone tell me how fast, top speed (mph) a 316 can go? i i was just curious.
and they all should of had a o.e hour meter? correct ? mine is missing. this 1984 model was given to me
they think is a blown head gasket cause it smokes bad and runs bad. my brother had given me his d110
that had to same problem and i fixed it and sold it for 400.00. and on that one i can see why in the blown spot
and with my research the head does not bolt down exactly evenly around the piston. i am looking forward to working
on the 316 and learning about the small engines. i also have an old murray 5 hp ride mower 1969 model the neighbor
gave me i would like to restore to a certain point. along with the jd 316 , i was a auto technician for 23 years....no more
and like the idea of working withe small engines and riders. i love watching all the john deere videos and learning
all i can thanks to all you john deere guys for posting your videos!
the 316 normally tops around 6MPH. Send us messages directly for further information or email/call our office.
can you fix the hydro on a
H16 gilson hydro tractor
I will look for a Gilson 16H!
what damper you use?
I used the John Deere OEM One. Do you need the number? I have to go look it up
@@Isavetractors I need the OEM part # if you have the time. Greatly appreciated. JD tractor stores started new program for part search. Took 45 mins to find mower blades for 316! Crazy.
You should buy a john deere 214
Do u sell parts
Yes we sure do! Check out isavetractors.com
Those are called shoulder bolts.
Do you own a John Deere 112L
No he doesn’t not yet anyways
Now just fix the oil leak and you'll be good to go ! Lol
When my grandpa and i picked up a cub cadet hydro garden tractor we decided to pull it and halfway the tractors hydro broke and we replaced the plunjers and he is going now and it drives nothing happend
how many children did you have to sacrifice for this part?