Remove and Install VCU - Stark VARG

Steps:
** REMOVAL **
- Remove front spoiler
- Remove front bolts
- Remove rear center bolt
- Remove side bolts
- Remove the spoiler assembly
- Remove carbon fiber spoiler
- Remove carbon fiber spoiler bolts
- Pull the spoiler backward and upward
- Remove front fender
- Remove fender bolts
- Hold the fender while removing the last bolt
- Take the fender out between the forks
- Disconnect VCU plug
- Remove side bolts
- Hold VCU and remove center bolt
- Remove VCU
** INSTALLATION **
- Hold VCU in place
- Tighten bolts to 5 Nm
- Connect VCU plug
- Install front fender
- Install the fender between the forks
- Hold the fender in place and install bolts
- Tighten front fender bolts to 8 Nm
- Install carbon fiber spoiler
- Slide the carbon fiber spoiler into place
- Tighten carbon fiber spoiler bolts to 3 Nm
- Install front spoiler
- Slide the spoiler assembly forward and downward
- Press down and forward on the seat if necessary to align the holes
- Tighten bolts
- Tighten rear center bolt to 8 Nm
- Tighten side bolts to 40 Nm
- Tighten front bolts to 5 Nm