Remove and Install Forks - Stark VARG

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ก.ค. 2023
  • How to change the Gear Oil on the Stark VARG 🐺⚡️
    Official Technical Tutorial.
    ▶️ Removal Process.
    - Remove front brake line bracket (only for left side fork)
    - Remove brake line bracket screws
    - Remove bracket
    - Remove front brake caliper (only for left side fork)
    - Remove caliper bolts
    - Remove front wheel
    - Loosen fork clamp bolts on the left fork
    - Loosen wheel axle lock nut
    - Loosen fork clamp bolts on the right fork
    - Push the axle lock nut inside
    - Remove axle lock nut
    - Lift the front of the bike to support the rear wheel on the floor
    - Hold the wheel and remove the axle
    - Slide the wheel out between the forks
    - Loosen the triple clamp fork bolts
    - Hold the fork while loosening the last bolt
    - Slide the fork downward
    ▶️ Assembly Process.
    - Slide the fork upward inside the triple clamp
    - Align the height and orientation of the fork
    - Hold the fork and tighten clamp bolts
    - Ensure the fork holds in place before releasing it
    - Tighten triple clamp bolts to value engraved on the part
    - Install front wheel
    - Slide the wheel between the forks
    - Wiggle the wheel and fork whilst pushing the axle inside
    - Gently bring down the front of the bike
    - Tighten axle lock nut
    - Tighten right fork clamp bolts
    - Install front brake caliper (only for left side fork)
    - Slide the brake caliper onto the brake disc
    - Tighten caliper bolts
    - Tighten bolts to 25 Nm
    - Tighten axle lock nut to 35 Nm
    - Loosen right fork clamp bolts
    - Spin the wheel a few times and squeeze the brake
    - Tighten all fork clamp bolts to 15 Nm
    - Install front brake line bracket (only for left side fork)
    - Install the bracket with the brake line inside
    - Ensure correct alignment to avoid crushing the brake line
    - Tighten brake line bracket screws
    - Check brake operation before operating the bike
    #StarkVARG #TechnicalTutorial #EngineeredByRidersForRiders
    Learn more and order your VARG here:
    @
    Observe your local health and safety guidelines. Ensure a safe working environment. Wear appropriate protective gear. Deviating from the prescribed order may result in injury or damage to the products.

ความคิดเห็น •