What's Inside? ETA Movement G10.211, G10.212 Disassemble | The movement in the swatch moonwatch
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Attention:
The movement in the Omega X Swatch Moonwatch,
There is one main difference between the MoonSwatch functionality VS the production units of the G10.211 / G10.212 movements available from ETA : the MoonSwatch is a no date watch but the G10.211 / 212 has a date.
------------
The ETA caliber G10.212 G10.211 is a Swiss made quartz chronograph movement with 4 jewels . This caliber is part of ETA's Fashionline family of quartz movements . It is not considered to be a repairable movement and is largely found in entry level lower priced timepieces.
Caliber G10.211, G10.212
⚠️This video show only disassemble
⚠️This movement is part of ETA’s Fashionline group of quartz movements. This caliber is not considered to be a repairable movement and is largely found in entry level lower priced timepieces.
⚠️Movements of these calibres can-not be disassembled, therefore, this document contains information on electrical tests and hands fitting only-ETA
★ Subscribe us on TH-cam : / solimbd
★ Like us on Facebook : / solimbd.youtube
★ Follow us on Instagram : / solimbd
#eta #movement #solimbd #moonwatch #omega #swatch #speedmaster
Maybe not the most expensive ETA Movement (or the best one) but still a work of art from an engineering perspective!
Thanks
Then, this is a bad engineering 😅
This why I like seiko movements more ! Like the seiko flightmaster movement 7T34. It easily runs 20 years and is fixable. This ETA is not a bad movement….I like the Seiko’s more .
Thanks for opinion
I would not want to keep using a 20 year old quartz movement. As technology advances so does accuracy. The fact that these movements can’t be worked on is completely irrelevant. They don’t require service, other than a battery change, because they gears are not under any significant load. The wear on any moving parts is almost nil. My G10.211 is currently running at about 6 seconds or so fast per year. It is not thermocompensated. MyG10.212 is currently running about 3 seconds a month fast. Again, this beats Seiko movements at this price point by a county mile.
The movement is not repairable, but watches with it are. For $65, the movement can be replaced. The hardest part is either removing the stem or opening the watch case. Te rest of the replacement is not too bad.
Put in date setting mode first then release the stem quite easily.....
Thank you! one of the chrono dials is acting up on my Tissot and this shows me that it is not servicable, thanks for sharing!
Wow Ronda 5000 series has this beat!! (Pun Intended) seriously though, Ronda you can repair it. I enjoy the ETA autos I have but this just makes me sad to see a Swiss company make such sub par movements as this. Great Video though!
Parabéns pelo vídeo, muito bom.
Thank you so much
Much more complicated than I thought.
it last me 10 years,I was expecting more for the price.
I wonder if there is some other better movement I can fit on my Tissot
Look at eta 251 series
My thoughts precisely. Just started looking for a suitable alternative to disposable quartz. A serviceable quartz such as Ronda5030.d? Or Miyoya? Or Seiko? A mechanical chronograph that fits the case of my PRC200?
Hi
It satisfied my curiosity to know what's inside. Thanks.
What was wrong by the way with the movement?
Not repairable
I have one which runs slow like 12 hours slow in a day. Seems to not run smooth. Makes me wonder what could do that. Though sadly not repairable
Lovely video, but the movement is not of the horological variety. It's more of the bowel type. And Tag uses these on some 1K watches.
Thank you
Yeah, it's also fitted on my formula 1 and kinda pisses me off that tag has the balls to charge 1k for a watch with a cheap movement. Still mine still works after 8 years, but I have mechs over 50 in my collection that also works.
Я думал будет хуже. Никакого криминала нет, можно брать.
Very interesting subject matter. Good luck buddy.
Thank you so much
Hello, could you tell me where the 4 jewels that the lid indicates are, I can't see them.
Look around the 8:40 Mark. You'll see two plates. There's a jewel on top and another on the bottom of the wheel. That's the 4 jewels.
How to assemble this movement again please upload a video
not possible because this movement not use any screw
Скажите пожалуйста. Как механизм
Looks like a Switch throw away movement.
Please do titan 1006 yl01 watch movement disassemble. I want to know. It's a slim movement.
Very old model watch, Don't weary i have this watch movement, next week i will try publishing this movement Assembly and disassembly video, thanks
@@SolimBD thank u so much
Klu skedar membingkar siapapun bisa yg diharapkan juga memasangnya kembali. Macam mana mengganti pasak plastik yg tlah dirusakan.
Thanks for feedback
Интересно, почему они называют переводной вал, штоком?
Non-serviceable movement in a 300-500 USD watch. It's sad.
Right
@@SolimBD Anyway, thanks for the video :)
This movement can't service?
No
Indeed, I find it scandalous. I understand I may expect such attitude in some Chinese watches, but expect more from those "Swiss made". As otherwise, what is the point to buy Swiss if similar quality may be bought at a fraction of cost from China?
Ist das Uhrwerk gestanzt?
Plastikguss. Die blechplatten sind mein einem Laser ausgeschnitten.
Unglaublich einfach nur Plastikschrott und das für 250€ einfach nur schlimm. Man zahlt bei der Uhr nur den Namen speedmaster .
What is the point? It cannot be re-assembled.
There are no screws on this machine
@@SolimBD Exactly
Was wondering if it can be re assembled by putting kind of glue on those points?
DID YOU GET IT BACK TOGETHER?
No
As far as I know, it is a expensive movement to replace... shame it is unrepairable...
Yes, thanks for comments
$50-$60 for a brand new movement. Not expensive at all.
@@michaelowen8055 add the cost to replace vs the real value of an used watch vs a brand new watch... also compare this to a Miyota movement... usually those watches end up on a trash bin
🌹🌹🌹
Were you able to put it all back in place? If so, would be interesting to see how you did it.
I think you will get everything in the video. Please see this again. And if you don’t get then please tell me what you mean that put it all back in the place.
@@SolimBD I mean, you had to break the plastic plate holders, so I guess you used some kind of glue to assemble? And if you did, of what kind and in which points you used. Thank you for taking the time to awnser :)
Got problem with my Tissot, stem broken and cannot be pulled out. Do I need to disassemble the front part (right after the dial)? Thanks
@@prasetyoutomo9470 Yes, looks like.
@@prasetyoutomo9470 Bawa ke tempat saya pak 🙏😊 Saya pernah bongkar mesin ini. Saya di malang
is this yellow tears gold?
Gold plated
This is what's in the Moonswatch people are paying thousands for. 😂🤣😂🤣😂🤣😂
hahaha that's right!!!! 😆
😂😂😂😂😂😂😂
😅😅
The Sunon machine in the Fake Moonswatch are better than This
@@FFG551000 There's no getting through to the snobs, even when I open their watch and show them.
it should be opened or not using a bolt
What was the trouble ?
Yummy plastic gears and plastic seals.. kind of a shame Omega would allow that partnership :x
From what I'm hearing omega was relucent in doing this but when papa swatch group says you have to make a cheap omega, you make a cheap omega.
@@Microwave414 Well said
Can you tell how durable is this moment ?
This caliber is not considered to be a repairable movement and is largely found in entry level lower priced timepieces,
Not bad
@@SolimBD Can it last me 5 years ?
Of course yes
@@SolimBD Thank you
Oh no....🙈🙈....such cheap plastic base plates and permanently fixed plastic moulds and joints. Looked like small capacitors and all are linked with thin pcb liners. It's totally an electronic junk. 🤔🤭😱. Can't imagine , so much expensive watches with lovely chronograph interfaces on dials, highly priced....huhuhuh
المحرك myotaأحسن منو بي كتير وقابل لي التصليح.عكس ETAخوردا.وغير قابل لي التصليح.حسب خبرتي من 35سنة.
Like, Thanks for opinion
part 2... reassembly 😆😆😆
Reassemble not possible, It's a not repairable movement
@@SolimBD dont worry, I know. Just kidding.
they could've made it easily repairable, yet they choose not to. like seriously, the whole concept of Swatch being a bunch of disposable watches just doesn't sit right for me 😕
if cheap Casios can be easily repairable, then that just doesn't justify it's swiss counterpart for being hardly repairable for 2-4 times the price of a Casio
Thanks for comments
This is not an irreparable Moovment ?
Not repairable movement
It its starting to fall apart even if you fix one part you can expect the rest to fail pretty soon. It's neither financially or technically worth the trouble to try and repair it.
Utiliser des Brucelles en acier pour un mouvement quartz n'est pas forcément une très bonne idée...
De plus, elle m'a l'air bien fatigué la pointe de cette pince
آنها لا يمكن آصلاحها ولا تستحق الشراء وبالتالي فأنها تعتبر فاشلة ومثال سيء على التقليد من الساعات .
My tissot prs200 T067.417 machine uses this machine, is my tissot fake? Please answer my brother
Original
@@SolimBD Thanks for the reply, I'll subcribe you, because you've helped me.
Original piece of disposable plástic 😂
Dick move on the Swatch group's part to make an unrepairable entry level movement. It's jeweled yet can be screwed in? What a joke.
Одноразовыи механизм.фуфло. зря деньги бросать
Thanks for feedback
OMG! This is a modern movement... bullshit