How to Make Air Conditioner Fan
ฝัง
- เผยแพร่เมื่อ 16 พ.ค. 2018
- How to Make an AC fan
By using a peltier cooling element, an ordinary fan can be cool as air conditioning.
Hopefully this video useful and see you in the next video ..
Music: - Easy Day (TH-cam audio library)
- Beat Your Competition (TH-cam audio Library) - วิทยาศาสตร์และเทคโนโลยี
🤦🤦
Maaf to the point aja.
Terkait keilmuan kita kudu jujur, jangan sampe orang Indonesia terus2an dibodohin.
Dimana2 konsep pendingin itu memindahkan panas dari suatu tempat ke tempat lain, bukan dari suatu tempat kembali ke tempat itu sendiri. Makannya tiap AC ada sistem buangan termal di luar ruangan (ac outdoor). Bahkan kulkas pun demikian, bagian luar permukaan kulkas pasti panas.
Terkait video:
1. Elemen Peltier mempunyai kemampuan heat transfer sangat rendah. Untuk 1lt air aja perlu 3-4 jam proses pendinginan, apalagi angin yg alirannya cepat 🤦
2. Termo digital jelas lah suhunya turun klo di tempel d sisi dingin elmen peltier🤦🤦
3. Kebalik lagi peltiernya😑
4. Tdk yakin bahkan sangat tdk percaya rakitan di atas mampu menyejukkan hembusan udara, kecuali klo di ganti pake sistem refrigrator seperti ac😊
Cewe boleh kan kuasai teknik😍
Pembahasannya keren mbak
👍👍👍👍👍👍👌
Super sekali
nice
pgn komen ape ye?
Cold side of peltier module should face the fan. You don't know how a peltier works but teaching us how to use it :)
You are correct bro, he don't even know about that.😂
پاکستان میں الوئوں کی کوئی کمی نہیں ھے۔۔۔ ہر شاخ پہ الو بیٹھا ھے۔۔۔
Your saying absolutely correct
Hahahahahsa.. I see that wrong thing.. Waste
Unfortunately, you don’t seem to know much better than he does. What you are talking about is heat transference. The cold temperature from the peltier, now directly conducted to the heat sink, just needs to find the best way to transfer through the system. Having it “face” the fan isn’t the solution. You are thinking in terms of either direct temperature conduction (like with a heatsink) or radiation transference (for which a tiny peltier cooler wouldn’t be able to do). The only possible improvement would be to make use of the heatsink by having wind blow across it to dissipate the cold air that is just sitting there turning the humidity into ice on the heatsink’s vanes.
Mantap , kalau dapat di produksi biar yg lain dpt menikmati
Terimakasih sdh berbagi ilmu
Sudah tak coba bos, gk efektif gk bisa dingin.
Emang bener elemennya kalau disentuh dingin, tp udara yang dihembuskan kipas angin tetep sama.
Saya pasang kipasnya ditoko tetep sama, gk bisa mendinginkan ruangan. Sama aja, kurang efektif, mending pakai kipas semprot air, lebih sejuk.
Tapi, saya tetep ucapkan Terimakasih atas ilmunya,
Agus Raci soalnya ukuran kipasnya terlalu besar mas, kayamya ini lebih fungsional kalo kipasnya kecil.
Ini sbetulnya di anjurkan untuk ruangan tertutup, cuma salah bikin judul/deksprisi yg tdk detile.
itu msangnya aj kebalik boss sisi yg panas mlh yg deket kipas yg dingin malah di sisi luar kipasnya..
Iya kipas angin pake air.. Ntarr paru'' basah
1 kipas angin 10 paltier pndingin pasti adem gan
Masukin di evaporator ac...dr peltier masuk ke evap,,,ksh selang masuk ke wadah...di tempatin di sirkulasi peltier lewat pompa air ikan ...hasilnya lebih mantap om..kyk AC bener...
..???..??.. Gak phm bro..
mosok sih,.butuh.brp biji peltier
Ini maa cocoknya buat coolant PC keknya mantep ga bakal overheat
VERY GOOD IDEA THANK YOU FOR KNOWLEDGE SIR YOU ARE GREAT
ITR IT'S
Sebetulnya orang Indonesia sudah ngerti teknik nya tinggal buat tampilan dan model yang praktis jadi deh mempunyai produk dalam negeri siapa tau bisa punya perusahaan besar sendiri.
Masang radiatornya aja salah
mimpi...
So, you're just moving the heat (a very little bit of heat - peltier elements are extremely inefficient) from a fan, to the container, that's located about 2 feet away in the same room you're trying to cool. Not to mention that the peltier element generates its own heat, so in the end you're just heating up the room (of course you might not notice it, because the fan is blowing the air towards you) but nice try anyway.
BOLEH MINTA ALAMATNYA MAS ......Hub.. facebook taufikwarman
Buat mobil oke gak ya
Lol
HEAT DESIPATED IN WATER
Or you can use car coolant to avoid water much more hotter, that results better for heat treatment
Muy bueno.... gracias por la idea.
Dari sekian byk ide ,saya paling suka ini ,mantap
Need more clear clarity.. Like English subtitles.. More clear explanation.. Anyways we subscribed
Wow amazing you made a room heater
lol
ini teknik yang sebenarnya. makasih ya boss ilmunya. nanti kalo dah jadi tak tag heheh
Inspirstif...mau nyoba ah
thanks man! I've been thinking of mounting a heatsink with peltier to my fan......cheers for the idea!! :)
Interesting
Live Free or Die
not really, hahah.....but worth a try.....
It doesn’t look like there is any air flow across the cool heat sink. There is no evaporation, therefore little cooling effect. I suggest you have the fan blowing on the heatsink.
Cool info, thanks for sharing, well done :)
It gives limited time cooling but good idea 💡❤❤
Please show us the connections with wire diagram. It will be very helpful to understand.
Having live exposed mains voltages on your desk is always a good idea.
LoL
wow that's nice i love it
Tambah dikit bos, biar lebih afdol alirin air lagi dikit ke dekat elemen dinginnya jadi air yang di tampungan ngak terlalu cepat panas
biar cepet dingin pokoknya ac buatan sendiri enak dinginnya pwooolll, walau pake kulkas bekas
Wkwkwk .....ya sangat bagus!
Aku sih udah nyoba kulkas bekas!
Aku buka pintunya saat udah nyala!
Dan aku taruh kipas d depan kulkas, akhirnya ruangan ku sejuk seketika......
@@muhammadyusup4436 hahha selamat anda menolong semua yg kepanasan wkwk
Aku ya bib, dapat bertuah raja. Trimakasih atas infonya Tuan Guru 🙏
Ide bagus, mau coba di aplikasikan di air cooler biar tambah dingin. Siapa tau ok
like very good
Interesante proyecto y muy didáctico, yo probé distintas configuraciones con Peltier por dos años, pero lastimosamente el rendimiento del Peltier es muy bajo, no funciona en la vida real como se muestra en el vídeo, si lo quieren hacer los invito a que prueben, es muy agradable practicar con los Peltier, pero si solo van a gastar y hacer esto por qué necesitan refrigerar un lugar NO LO HAGAN van a tirar su dinero.
En mi oficina de trabajo tengo un A/C pero no me gusta dejarlo todo el día encendido , buscaba un método de enfriamiento más pequeño para la PC , y viendo tu comentario, entonces necesito evitar intentar hacer la prueba como se muestra en este video?
You're great sir jee
Good job. Kreatif anak bangsa👍
You just have an aircon in this room..thats why the temperature decrease to 14°c .. the peltier hot side is attached to the fan so it cant decrease the temperature..
I feel its robust design, yes the Heating side faces towards the fan side but with mini water radiator and cool air surrounding it neutralize it, understanding the Fans mechanism it sucks the air from the backside, so when the air sucks it has to flow through the Cool side and thus it distribute the cool air almost evenly. the heat will not be more than 50 deg, while operating it almost neutralized and on the other end we will not get the freezing output, Purunjadungala Danalakshmi
Yaa that is what I'm thinking of...it can't get cool it only desipates heat not cool air
Ohhh now i get how he get decrease the temperature man...
Fake and reail video please tell me
Mantul gan langsung subscribe.....Coba langsung agan jual 1 paket pasti laris....saya juga mau mesen tingal pasang aja.....yg setubuh like kwkwkwkwkwkw.....
Bang minta no what'sapp nya bang yg punya Chanel ane mau beli satu paket aja
Aku juga mau pesen nih
Iya bg ada nomor WhatsApp nya saya mau pesen
Kamar saya panas bg
Atau share link online shop ABG aja biar saya beli
Yah pliss
Mantap bro ilmunya... Tapi klo saya lebih sejuk dan adem rebahan di ubin musholla. Mantap adem.
😂kere
Sdah jgn ribut....kpan kita bisa mandiri,hadirkan klo apa yg luu punya 💪👍
Sukses terus bang..
Jalan jalan sore ke rumah yuk gaes.. 👍🏻😁
Hy
So you made a heater. GoodJob!! :D
but 13°. Ahahahahaa
That’s what I also thought !!!! Strange
Aray ghadon Voh Pani ki bottle bhi usi room main hai toh paani bhi Thanda ho ja Raha hay.. Mana Ko water takes time to cool but it's a chain...
Yeah hahahah
Hahaha,,,yes,,its the opposite,,
Cantik :)
Sekedar masukan, membuat AC pemakaiannya seperti Lemari Es yang pemakaiannya PLN nya tidak banyak kira 2, 150 wat, itu di kembang kan, jadi walau kanibal alat nya tidak berbahaya dan tidak menambah kerja'an, semoga di coba dan sukses.
Jember 74 th monitor.
wow! I dont know where to start... your cooling the hot side of the peltier with water... which will eventually equalize to a constant hotter temperature and reduce the cooling effect of the peltier module. then you have a heat sink on the hot side water cooler attached to the fan, which will pull hot air off of the heat sink and introduce it into the moving air stream. the cold side has very little connection with the air stream of the fan, and will most likely not even change the outgoing air stream by any quantitative amount. last but not least, your temperature probe is connected directly to the cold side of the peltier, which yes, will give you a drop in temperature as long as the water will stay cool, but does not measure accurately, or in any manner the change in temperature of the outgoing air stream. maybe a re-evaluation of your efforts is in order. just removing the peltier setup you have on the fan will probably give you better cooling, or better yet, staple a bag of ice to the back of that fan, it seems to be more in your wheelhouse.
garage shop did you made this ??
@@gagai786 ive made it. And what he says is deffinetly true. He is litterally blowing hot air with the fan generated by the peltier, while measuring the cold side which doesnt reach the airstream
Bjorn Stevens you mean we can’t get the cold air with this ??
@@gagai786 no, he has a heatsink on the hot side. The cold side is very tiny....
I exactly felt the same..
komentator nya mendunia ini.. mantabs 👍🏻
barangkali perlu subtitle translasi, mas bro
Ide yg bagus semoga km sukses slalu y
Mantap keren...
He attached heat side with the fan and Highlight is he use muffler 🥶 that's very nice bro.... 🤣🤣
Keep Rocking 🕺💃🕺
Right dude😂
In order to cool, you must remove heat. You’re not cooling anything but the surface of the peltier
I thought so, but the temperatures tell us it's works
Not an ac..just chilled air blower
Nice... Good job..👌👌👌👍
ide yang sangat kreatif ...
Onde eu encontro esses materiais? Gostei do projeto
Bahan bahannya kurang jelas bagiku tolong dong ditulis di deskripsi lain kali biar memudahkan yg mau mencoba.
Bahannya rahasia dan sabar 😂
Betul bahan"nya apa ajja bos
The best 👍 one
Ilmu ...itu Mase...jos
If you put 3 of them will be great . i hope that you explain the way with voice and English subtitle .
Bhut bdiya brother apne ekdam shi video bnaya hai q ki apne video mai hi sabhi components show Kiya hai with rs thank you brother
ALÉM DE LINDO, VOCÊ É INTELIGENTE!!! MUITO OBRIGADO!!!
bagus di pake dipuncak bogor ini,
Haaa.. .mau senyum senyum rasanya wkkkk
getting cold air from the HOT side of Peltier ... isn't strange... ICE is behind the Fins of Fan and HOT heat sink is at the table fan... HOW DID you do that? the thermal sensor should be at front of Table Fan.
sahi pakda
Merci pour se tuto peut tu me dire quelle colle grise tu a mis, et quelle sont les références des deux dernières pièces noir un radiateur round noir ? et une plaquette noir avec les vis ? pour tenir le tout donne moi les références merci a toi.
Thanks for tutoring can you tell me what gray glue you put, and what are the references of the last two black pieces a black round radiator? and a black wafer with the screws? to hold everything give me the references thank you to you
Pour la colle grise c'est de la pâte thermique
Bacot
it is thermal paste dear.
Mntaaabs om
Makasi mas ilmunya
Kasih detail nama² alatnya bos,biar enak belinya
I think You maded a room heater + dehumidifier...😁
lol
The heat will transfer to the water, I wonder how warm will it get.
Agreed dude
MADED
just use a bucket of ice water and pump it through a pump and use a CPU heatsink and fan blowing at your direction. Even simpler than that :P
🥳 solusi AC untuk ruang tamu terbuka 👍
Thank you for your nice and useful e video to us
So nice of you
Apa bisa dibuat modul agar bisa diatur temperaturnya (13'C itu dingin banget ya kalau di kamar.. hehehe) agar bisa lebih nyaman. Tks untuk ilmunya.
Great video 👍 Would be nice, if u could share the link of the products that you bought online, in the description.
Easy enough to find. It just doesn't work.
Owh baru faham..sbetulnya haba panas itu hanya ketika awal mulanya saja..apabila sirip sejuk itu mulai sejuk beku,maka yg sebelah panasnya sudah tidak terasa lg..ada pun cuma sedikit,tetapi akan di buang haba panas melalui air itu.dan sirip di sebelah panas akan biasa² saja..kemudian kipas akan menyedut udara sejuk dari belakang ke depan,jd ruangan hanya merasa sejuk sahaja kerana panas nya tidak terasa apabila sebelahnya sudah membeku
ide kreatif bossss keren josss
Bang, knpa ga produksi aja alatnya yg siap pakai dan bang jual.
Soalnya kalau ada biar gw pesan bang hehe 😁
Up
Up
Nah iya ni bang
Bener ini saya jg mau pesen
Up
fix that thermostat sensor below the fan. that will be a real temperature
keren; trims sudah sharing
Haha joss mantap
The room temperature should increase with this setup.
Correct man but how he is doing decrease the temperature
@@jyranone4820 he faked the temp. reading cause the room uses real airconditioning.
Lol
Then how about the drips from the cooler? It is directly going to the fan's motor, I know there's a cover, but on the switch for the swing it has a whole, good luck with that.
I seen the thumbnail and laughed, read the comments and now I cant stand up! hey at least they tried!
Ini baru mantep
Sorry but this is completely useless. You are just warming the water AND the air.
The air flow goes through the cold and hot side of the Peltier chip. And I am pretty sure the hot side is winning even with the water "cooling" system (as it is only a very small quantity of water that will heat up super fast) meaning the air is warmer with your system than without.
You should put the Peltier chip outside of the room with the hot side attached to a radiator and a fan so that the heat produced by the chip is not kept in the room but released outside.
Then, you attach a water block to the cold side of the Peltier chip and another one on your big fan (with another radiator attached to the water block).
Finally, you run water using a pump between the 2 water blocks, the water will be cooled outside thanks to the Peltier chip and will then cool the air going through your big fan.
But, anyway, your chip is only about 60W so it won't do no good. You would need a lot more power to feel something.
You'd be better off spraying water through the fan with the pump and a sprinkler or attaching a mist maker in front of it directly.
Man.
Perfect
Menurut aku masih terbilang boros daya klo utk peltier sekecil itu. 76W + daya kipas (50W)
Betul, jadi gimana solusinya pak
Solusinya gimana ya
@@RPreviewproduk solusi beli ac
Solusi nya beli kipas yang lebih kecil watt nya 😁😁😁
Rangkai aja pakai panel Surya kebelakang e gratiss
pake peltier bisa dngin, kalo komponen ditaruh diluar ruangan. caranya buat bak air, air yg dingin disirkulasi ke dalam ruangan, letakkan semacam radiator/expansi didepan kipas angin. seperti ac besar di gedung2, cuma kalo pake peltier nggak yakin bisa ngejar suhu rendah untuk sirkulasi air 1m3 saja...
mantap bahan nya apa aja kurang jelas saya suka
Did you try to boil water? because I think you set it up wrong. Water cooling would require cold water, and I think you put the casing on the hot part of the peltier element.
yeah
And please that something's you use in covering the substance that you created
I wonder where he hide the hot water element? Maybe its table heat absorb able.
Why is the hot side close to the fan and the cold side of this design has no airflow forward?
kreatif banget
Skalian aja bro beli kulkas 2 pintu ente bisa laotopan didalam sana asli dinginnya no tipu2
Have you measured the air-on & air-off temperatures to see if there is an actual difference?
Can you just tell me
How can i management the all type of cable
Hope you can reply as soon as possible
CAN YOU CALL ME I WANT TO BUY THIS 5
PRODUCT
I want to buy this product
i want to buy this product
Looking nice
luar biasa
Dear, I'd like to know the specifications for the parts(component) in the video here.
Agree, is it possible to list the component?
@@suriyapun you know this is fake and doesnt work at all right?...
this video use a wrong method
I've seen it done with multiple methods. The ones that can act similar to a window ac use insulation pads with ice inside a insulated enclosure but it generate a ton of condensation so they can't be used with anything electrical for safety issues.
This seems similar and can probably work at lowering temperature a tiny amount at the cost of dimishing returns. It's also a humidifier which comes with health issues, mold, fire hazards
I have tried this years ago using my Dewalt blower and a extra NZXT closed loop water cooler. It worked well inside an enclosure and wouldn't do jack shit to an average room.
Stick with a ac if possible.
Now you can make hot water directly in your room. And BTW which AC are you using in your room? 13 C is really good.
Is it true
😂🤣
charan k.v ...mungkin itu suhu permulaan je...
Mantab gan
banyak yg nyinyir terkait sisi panas ya hehe. btw itu peltier prinsip gamblangnya emg memunculkan sisi panas dan sisi dingin. misal nih misal sisi panasnya 10 sisi dinginnya -10. nah berhubung sisi panas diberi heatsink yg mampu menyerap panas, sisi panas bisa aja jd 0 dan sisi dingin -20. maka suhu sekitar peltier menjadi lebih dingin. tp pada percobaan di video tsb menurut sy emg kurang efektif untuk mendinginkan udara. mungkin perlu lebih dari 1 peltier kit dan rangkaian (tembaga misal) untuk menghantarkan hawa dingin mengelilingi frame kipas. cmiiw..
Peltier module, satu sisi panas, dan sisi lainnya dingin itu adalah kenyataan. Masalahnya, panas dingin dalam satu ruangan yah sama saja haha.
sisi panas peltier "diturunkan temperatur-nya dengan waterblock (memakai sirkulasi air) dibantu fan sink.. justru itu lebih efisien, semakin rendah suhu pada sisi peltier panas-nya, maka semakin rendah sisi peltier dingin nya..
kalau pakai fan+sink tanpa waterblock, akan menghasilkan suhu ruang (efek panas vs efek dingin beradu)
Ok
Gak maksud aku bang...tp sipp lah.. maju terus bangun chanel nya...👍👍
Kalau, bunga es mencair, akan kena rangkaian kipas angin, konslet dong. Alangkah baiknya dibagian bawah kipas pemasangannya.
Tulisan nama alat alat terlalu kecil gk kelihatan mas, tolong tulis di deskripsi aja... Makasih
Pls someone explain me the working on how is the fan working as an ac because the side which showed formation of ice on heat sink is on the other side of the fan blade...so in that sense it will give out warm air and make the room warm instead of making the room cool...i cannot understand..someone pls clear my doubt as i am going to make it..
en.wikipedia.org/wiki/Thermoelectric_cooling
try to read this.
Quang Thiện Bùi Aaa.. actually i didnt get it whole😓😅so the main question is if i do the exact..it will work to cool a room ,right?i am making it in school as a project after watching your video...the purpose of it is to cool and lower the temperature of the whole class...can it do that??
This device transfers the heat from the air (on the fan) to the water in the bottle. So it can cool down the air blow from the fan, but can not bring the temperature of the whole room down, unless you bring the bottle outside of the room.
Quang Thiện Bùi Thanks a lot😀☺😊 that means if i just increase the length of the pipe and place the bottle outside..it will do the trick because of the temperature difference is always there,right?😀
yea, that's right!
Pasang AC pasti ruangan jadi dingin. Ada yg gampang jgn di bikin ribet.👌
Ga semua orang mampu beli ac da bayar listriknya Boss