My father was a master jeweler, hand engraver, and watchmaker for over 40 years. He had his own shop and also manufactured a good bit of his inventory himself. His specialty was initial monogram pieces. He would hand draw in pencil the design, then engrave, drill out the spaces, and then hand saw (wire blade) each and every piece himself. To entertain himself during this lengthy and time-consuming task, he would listen in headphones to old AM Radio broadcasts of New Orleans Saints games he recorded on casette years before. He must have done at least 10k pieces in his career, all of them one of a kind. Thank you for sharing this video. You are very talented as well.
Thank you. This was very informative. It can be difficult learning a new craft from youtube at times. It is nice to have found someone who didnt just learn them selves.
Thank you Julie. I use many different techniques when I design making my jewelry. I want each piece to be different, unique. But I’ve not as yet, attempted graving. However, watching just this brief tutorial I can already see that it would definitely be a useful technique for me to learn and put to use in my shop. I could use it in so many different pieces which would add so much more lovely texture and design. I subscribed to your TH-cam channel and will be searching for more educational content from you. Again, thank you.
Has the heel already been honed in prior to retouching the face? Is it the heel or the belly of the graver you are polishing? I understand polishing the heel is crucial to a smooth cut as it is what "rides" along the bottom of the cut. The belly is the bottom portion of the graver along its length ending at the heels. Graver geometry requires a heel as the graver would otherwise have nothing to control the depth of cut. Without it the graver will just continually stab down and into the workpiece like a chisel. Creating a 0.25mm to 0.5mm heel allows the graver to glide at a specific depth as once you are at the depth of cut you want you level out the heel which is now essentially parallel to the bottom of the cut allowing it to glide at that depth continually. If you want to cut deeper, tipping the graver handle upwards while easing up and out of the cut by tilting the graver handle down while you push.
Hi I am interested in learning how to push grave. I have no idea as to which gravers to get. I want to grave brass and copper. I want to buy a selection of the main types. Onglette, knife, round, square, etc... but the more I look into it the more confused I get. I have no idea as to what size and angle to buy. I want to engrave scrolls and such onto key rings and desert plate sized copper and small boxes etc... I've never done this before so I couldn't tell you what angle I like to grave at or depth of cuts I prefer to make. The few specialized sites I've gone to expect me to know such things already and I don't. I also can't find anything on here that covers such things in the level of detail I'm looking for. I want the size and angle and basic types best suited for a noob. I'd rather not buy a set only to find that I should have bought the opposite angle and three sizes bigger or smaller until I find the ones I actually wanted. I won't be using anything powered either. And I don't know which brand is best either. I'd also prefer not to buy from amazon but rather a specialized site for such things. I think HSS would be sufficient and most affordable for my needs. Also any links to where I can buy a hand held jig for sharpening them would also be a benefit. thanks
@@julieanctil1440 You don't mention the angle for the tool. Most sites of any repute and that aren't using Google translate Chinglish ask that you pick the angle for the tools you buy. They come in increments of one degree starting at 45° and decreasing until approximately 17° depending on the website you visit. I am assuming that there is a sweet spot range that is easier for the novice aka me to use rather than an angle outside of that range. I could trial and error the process until I find out what that range is, but I neither want to buy a bunch of the same #2 onglete or regrind one tool multiple times till I find the angle that suits me.
@@arikkraft5755 healthy new year, barev arik. honestly, i wasn't expecting a reply to the post. i'm glad you're its know how to this profession. let's talk, share ideas. do you have a chatboard you use ? thank.
@@arelgr9407 Hello, I don't have a chat board. As I don't have Facebook or Instagram. I am subscribed to Jewellers and other makers from around the world. On my channel I've made them viewable.
Вообще не знаю английского языка и просто прислушался к словам и все стало понятно. Английский язык это Детский лепет русского языка , как маленькие дети, что ещё не умеют разговаривать и проговаривать буквы👶. Улыбку вызывает то ,что Взрослые люди лапочат как маленькие дети до 3 лет🤗.
Она объясняет принципы ручной гравировки. Объясняя технику безопасного держания китштока и как правильно держать штихель. И уважай пожалуйста все языки.
@@АлександрАндрианов-н1о я понял что он лепетал ! А УВАЖЕНИЕМ это вещь ОБОЮДНОЕ! а когда русскоязычный подобное пишет, то кроме чувство ОТВРАЩЕНИЯ он не у русскоязычных не у Англоязычных не вызывает ! ..
My father was a master jeweler, hand engraver, and watchmaker for over 40 years. He had his own shop and also manufactured a good bit of his inventory himself. His specialty was initial monogram pieces. He would hand draw in pencil the design, then engrave, drill out the spaces, and then hand saw (wire blade) each and every piece himself. To entertain himself during this lengthy and time-consuming task, he would listen in headphones to old AM Radio broadcasts of New Orleans Saints games he recorded on casette years before. He must have done at least 10k pieces in his career, all of them one of a kind. Thank you for sharing this video. You are very talented as well.
I used to listen to books on tape! Now luckily we have podcasts. ❤
@@julieanctil1440what kind of tool is it mam? Does it works?
@@julieanctil1440hello mam which tool is this? Please reply me.
I also looked through your videos and couldn't find the previous video you mentioned where you talk about setting up your graver.
Thank you. This was very informative. It can be difficult learning a new craft from youtube at times. It is nice to have found someone who didnt just learn them selves.
Thank you Julie. I use many different techniques when I design making my jewelry. I want each piece to be different, unique. But I’ve not as yet, attempted graving. However, watching just this brief tutorial I can already see that it would definitely be a useful technique for me to learn and put to use in my shop. I could use it in so many different pieces which would add so much more lovely texture and design. I subscribed to your TH-cam channel and will be searching for more educational content from you. Again, thank you.
Best beginner tutorial for hand engraving
As a amateur silver ring hobbyist, i find this tutorial outstanding, thank you.
Great video
THANK YOU, FOR THIS VERY SOLID BEGINNING ADVICE, ON HAND "PUSH-GRAVING"! AWESOME!!!
Has the heel already been honed in prior to retouching the face? Is it the heel or the belly of the graver you are polishing? I understand polishing the heel is crucial to a smooth cut as it is what "rides" along the bottom of the cut. The belly is the bottom portion of the graver along its length ending at the heels. Graver geometry requires a heel as the graver would otherwise have nothing to control the depth of cut. Without it the graver will just continually stab down and into the workpiece like a chisel. Creating a 0.25mm to 0.5mm heel allows the graver to glide at a specific depth as once you are at the depth of cut you want you level out the heel which is now essentially parallel to the bottom of the cut allowing it to glide at that depth continually. If you want to cut deeper, tipping the graver handle upwards while easing up and out of the cut by tilting the graver handle down while you push.
Yes, the belly and slight heel are polished.
Thank you! I really appreciate this!!
Thank u very much i am begginer jeweler and this video help me !!!
Excellent
Hello, thank you for the video. I cannot find the video for how to sharpen the graver/ prepare it.
I couldn't find this video either I would have liked to have seen it as well
thank u so much, so usefull. hope you do more engraving content, pls :3
Thank you for the video!
Thanks, very useful. I will check out more of your videos.
thank you. Could I ask how you remove the setter's cement from the back of the metal when finished? Thank you
Warm up the piece until you can remove as much as you can with your nails. Then soak in isopropyl alcohol.
Super
This is great! Just subscribed
Very Great, thanks
Can you tell us what's the name and size of graver
It is an onglette graver no 2
Hi I am interested in learning how to push grave. I have no idea as to which gravers to get. I want to grave brass and copper. I want to buy a selection of the main types. Onglette, knife, round, square, etc... but the more I look into it the more confused I get. I have no idea as to what size and angle to buy. I want to engrave scrolls and such onto key rings and desert plate sized copper and small boxes etc... I've never done this before so I couldn't tell you what angle I like to grave at or depth of cuts I prefer to make. The few specialized sites I've gone to expect me to know such things already and I don't. I also can't find anything on here that covers such things in the level of detail I'm looking for. I want the size and angle and basic types best suited for a noob. I'd rather not buy a set only to find that I should have bought the opposite angle and three sizes bigger or smaller until I find the ones I actually wanted. I won't be using anything powered either. And I don't know which brand is best either. I'd also prefer not to buy from amazon but rather a specialized site for such things. I think HSS would be sufficient and most affordable for my needs. Also any links to where I can buy a hand held jig for sharpening them would also be a benefit. thanks
We start our students on onglette #2. It’s a good start but you will want to purchase a few more afterwards.
@@julieanctil1440 I have checked sites and there are tons of different angles for them which should I get? Ty
@@julieanctil1440 You don't mention the angle for the tool. Most sites of any repute and that aren't using Google translate Chinglish ask that you pick the angle for the tools you buy. They come in increments of one degree starting at 45° and decreasing until approximately 17° depending on the website you visit. I am assuming that there is a sweet spot range that is easier for the novice aka me to use rather than an angle outside of that range. I could trial and error the process until I find out what that range is, but I neither want to buy a bunch of the same #2 onglete or regrind one tool multiple times till I find the angle that suits me.
Definitely start with 45 degree angle.
Thank you! Great information! I’m a jeweller who wants to learn this new to me skill. ❤
Where is the best place to find used equipment to start?
Try to find local jeweler groups on social media. Or ask at your local jewelry suppliers.
Namaste
What do you used to stuck the plate, name of material used
why did ask, you will apply it ?
You can use pitch it's a type of pine resin and plaster mixed, there are others. Some made with petroleum.
@@arikkraft5755 healthy new year, barev arik.
honestly, i wasn't expecting a reply to the post.
i'm glad you're its know how to this profession.
let's talk, share ideas. do you have a chatboard you use ?
thank.
@@arelgr9407 where can I get it, and what thermoloc used for and how can I get it in india
@@arelgr9407 Hello, I don't have a chat board. As I don't have Facebook or Instagram. I am subscribed to Jewellers and other makers from around the world. On my channel I've made them viewable.
👍👍👍👍👍
What kind of graver would you suggest for cleaning up the bezel after stone is set?
Onglette #2 graver
Thank you.
Please provide the shapes of hart burs
Hart burs are shapes similar to a faceted stone.
What name this tools thnaks ?
It’s an onglette graver
says to never cut towards a body part then jump to @4:27 lol
Dont put a body part in the way of the graver--- so what about at 4.26, looks dodgy to me !
Nice
Вообще не знаю английского языка и просто прислушался к словам и все стало понятно. Английский язык это Детский лепет русского языка , как маленькие дети, что ещё не умеют разговаривать и проговаривать буквы👶.
Улыбку вызывает то ,что Взрослые люди лапочат как маленькие дети до 3 лет🤗.
Она объясняет принципы ручной гравировки. Объясняя технику безопасного держания китштока и как правильно держать штихель. И уважай пожалуйста все языки.
@@АлександрАндрианов-н1о я понял что он лепетал !
А УВАЖЕНИЕМ это вещь ОБОЮДНОЕ!
а когда русскоязычный подобное пишет, то кроме чувство ОТВРАЩЕНИЯ он не у русскоязычных не у Англоязычных не вызывает ! ..
Why don't you sharpen to a mirror state shtikhel?
Beware stab your hand.
talks too much rather than showing
She literally showed all of what she was saying smh