ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
A tip for everyone watching. Loosen up the heater boxes and the tighten up the front. It "should" go pretty easy that way. Good video!
The flames are awesome. I would install this exhaust for that alone...
That’s not really do to the exhaust. It showed up after the exhaust, but the carb was rich and the timing was retarded.
Sounds great. I think I just ordered this same exhaust for my Ghia.
E - Fuel pump should be mounted in the front close to the gas tank. More efficient when pushing than pulling.
Hola muy buen video este escape funciona para un modelo 1961 de 1600cc
I am looking at the same exhaust for my 74 Super. Can you give me some feedback please?
We love this exhaust, It sounds prefect.
If we remove the cooling line do the engine get overheated?
Need some transmission mounts and a major tune up
What engine is that, 1600 stock?Sounds great, for dual carb you need to lose the vacuum advance dizzy and get a 009.
You shouldn't get any flame pop, probably a gasket not sealing fully between the exhaust and head. That can cause a hole to get blown and wreck your new exhaust!
Dose it come with all that's needed to install
Yes it does.
Can I eliminate the heat tube then weld up the exhaust
can the baffles be tooken out
How to make pop and bang?
A tad bit too lean- shooting flames is not good. Does sound good though!
Those engine mounts look messed up.
Man, your motor runs ROUGH. Are you using the correct heat range plugs for air cooled engines?
A burned valve I suspect.
Why are you running a 09 distributor from a stationary engine ?That makes no sense ?No wonder your engine runs like sh¡t ... Ha ha
A tip for everyone watching. Loosen up the heater boxes and the tighten up the front. It "should" go pretty easy that way.
Good video!
The flames are awesome. I would install this exhaust for that alone...
That’s not really do to the exhaust. It showed up after the exhaust, but the carb was rich and the timing was retarded.
Sounds great. I think I just ordered this same exhaust for my Ghia.
E - Fuel pump should be mounted in the front close to the gas tank. More efficient when pushing than pulling.
Hola muy buen video este escape funciona para un modelo 1961 de 1600cc
I am looking at the same exhaust for my 74 Super. Can you give me some feedback please?
We love this exhaust, It sounds prefect.
If we remove the cooling line do the engine get overheated?
Need some transmission mounts and a major tune up
What engine is that, 1600 stock?
Sounds great, for dual carb you need to lose the vacuum advance dizzy and get a 009.
You shouldn't get any flame pop, probably a gasket not sealing fully between the exhaust and head. That can cause a hole to get blown and wreck your new exhaust!
Dose it come with all that's needed to install
Yes it does.
Can I eliminate the heat tube then weld up the exhaust
can the baffles be tooken out
How to make pop and bang?
A tad bit too lean- shooting flames is not good. Does sound good though!
Those engine mounts look messed up.
Man, your motor runs ROUGH. Are you using the correct heat range plugs for air cooled engines?
A burned valve I suspect.
Why are you running a 09 distributor from a stationary engine ?
That makes no sense ?
No wonder your engine runs like sh¡t ... Ha ha