What an interesting boat build. A boat intended for use in harbor and coastal areas. It is relatively light weight, uses a smaller hp engine of about 7 to 40 hp, has a panga hull form designed specifically for the environment this boat is constructed for and operates in. This boat is not an expensive center console monster horsepower fast boat. It’s an affordable, inexpensive functional utility boat. It can give years of useful service to its owner for minimal cost. And since it has a large amount of foam used in its construction, it looks like it has a good amount of positive reserve buoyancy in case it gets damaged and flooded with water. And when damaged, it will be simple to repair. A very useful and minimal maintenance boat.
Mate.. these boat are professional fishing boats used even 50+ mile offshore, I live in West Africa and we have even more primitive looking timber 12 meter kayak style pirogues with huge timber in the base 12 inches wide and 8 inches deep... the boats are over a tonne and run routinely with 15hp Yamaha outboards... and going usually 20 to 60 mile offshore pulling in Marlin and 5 ft yellowtail tuna on hand lines..(in the right season)... no crazy laws like the western world... but we feed the western world with our fish exports.. 😊 good luck, be happy
Release wax is a 【tape】! Wow~ you are genius!!! World 1st very thin layer boat! Great job! God bless you ♥ From South Korea of far East 고기 많이 잡아서 부자되세요💰💰💰💰💰
I am realy happy to wach your vedio i get lost lessons from your vedio how to build the boat ,and I had stard to build and my boat is done.thankd fir good inspiration.
Para hacer laminados de mejor calidad es recomendable quitar las burbujas de aire que van quedando al impregnar con la resina con un rodillo metálico que vienen para eso al igual que el molde que cubren con cinta debería estar pulido , brillante, con varias capas de cera y separador como el alcohol polivinilo para que no se adhiera y poder sacar la pieza sin cortar las esquinas, esto es solo un aporte, gracias por el vídeo, buen trabajo!!! saludos desde Uruguay, Sudamérica.
No se dió cuenta que lo fabricaron con lo que tienen a mano? El método es precario y mejorable aún así no deja de ser útil. Usted está hablando de lo óptimo..le aseguro que esa barcaza no sé hundirá y le durará muchos años
@@IgnacioRamirez-m1g la pintura ideal es el gelcoat que contiene resina poliester, aerosil (sílice impalpable), pigmento, estireno parafinado, etc., se puede hacer casera o comprarla pronta para usar, no es muy nivelante y el ideal es pintar a pistola por fuera, en el interior a rodillo o pincel, en el exterior primero se pinta el molde y luego de secar se enfibra y la resina poliester debe de ser marina porque es más elástica, saludos
Fiber glass boat making complete video ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ th-cam.com/users/NewOneMedia2017 ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Fiber glass boat making complete video ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ th-cam.com/users/NewOneMedia2017 ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Very cool guys! I am thinking about making a recycled plastics boat with friends, totally different but if it comes out 1/2 as good as you guys' boat, we'll be elated. Thanks for sharing
Fiber glass boat making complete video ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ th-cam.com/users/NewOneMedia2017 ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
I is totally impressed with this build video. You did a very good job and I like everything you did to build it. With out power tools and with only simple materials. I wish i could do as well.
Fiber glass boat making complete video ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ th-cam.com/users/NewOneMedia2017 ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
@@mohamedsheikh6618 Hi - I think you have the beginning of a strong boat. I would put a second or third layer of fiber glass on it and it would be very much like a commercially made boat. My nephew was in the USN off the Horn and saw these types at sea 30-40 klicks out with 3 or 4 man crews. Yes they are primitive, but all the elements of a boat are there and glass enclosed. I don't think they will last 100 years but who knows. Suggest u look at the videos, especially the one with the 10-12 foot hammerhead shark. Just sayin.
@@mohamedsheikh6618 Fiberglass layered in resin is strong enough to stop a 9mm bullet with only 12mm of thickness. The hull of this boat has at least 50mm, it can hold the weight of about 7 people without breaking. It's cheap, lightweight and safe.
Good job buddy I enjoy looking at this video thanks for sharing it it helps me a lot from the Caribbean Trinidad i am going to build a fiberglass boat 22feet
Fiber glass boat making complete video ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ th-cam.com/users/NewOneMedia2017 ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Fiber glass boat making complete video ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ th-cam.com/users/NewOneMedia2017 ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Fiber glass boat making complete video ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ th-cam.com/users/NewOneMedia2017 ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
The workmanship by this man (men) to make a seaworthy boat from scratch. Doesn't seem to be stressed out rushed to get it done. That's how real quality is done. I'd buy one from this guy if I could get it back to the States without hassle. I'd even put "made by ____(name), from ___ (country). "
sea worthy it is not; for it does not have a deep vee astern,and will break your bones if slamming on waves; but it will be great for calm waters, it is long and narrow,it will be economical on fuel; i'd be a buyer too
You must not know anything about boat building? I can point out dozens of mistakes, any one of which will result in rendering that vessel un-seaworthy, but I'll just mention the most glaring. He cracked the hull in several places removing it from the mold!
Hola primero quiero saludar de manera amable y desearles lo mejor , les escribo desde buenaventura COLOMBIA soy fibrero de profesion desde hace muchos años y quiero decirles que en cuanto a la modalidad de trabajo de acá me quedo asombrado de como trabajan ustedes la fibra de vidrio . ahi muchas fallas pero respecto la forma de trabajar espero mis palabras no sean ofencibas para ustedes yo también son afrocolombiano y me gustaría compartir con ustedes
Fiber glass boat making complete video ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ th-cam.com/users/NewOneMedia2017 ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Hello Master Som, This is a very impressive video. Thank you! I first saw it in four segments. It's much better all in one. Can you please tell me the size of this boat: length and width? Thanks and keep up the good video and boat building work.
Fiber glass boat making complete video ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ th-cam.com/users/NewOneMedia2017 ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Bom dia. Belo trabalho. Parabéns, vocês são inspiradores. Peço permissão para fazer duas perguntas: 1. A espuma foi produzida por vocês, nesse formato parecido com pedaços de madeira, ou foi comprada já pronta nesse formato? 2. A forma original é de que material?
Fiber glass boat making complete video ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ th-cam.com/users/NewOneMedia2017 ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Fiber glass boat making complete video ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ th-cam.com/users/NewOneMedia2017 ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Fiber glass boat making complete video ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ th-cam.com/users/NewOneMedia2017 ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
achei muito massa, adoro ver o processo de produção. acho bonito que tem habilidade de fazer essas coisas. ficou muito massa, parabens. Qual o peso final dele voce pesou?
nao e tao dificil fazer algo assim nao cara, o que pesa mais e o preço dos materiais e o espaço pra fazer, de resto o processo e bem simples, a claro, tem que ter um pouco de conhecimento de como trabalhar com fibra de vidro, qual material usar no molde pra desmoldar
Sehr abenteuerliche Bootsbautechnik. Und vor allem hat das Boot dann auch genau dieselben Beulen, wie das Original! - A real adventure this kind of boat-construction! And one advantage is that the new boat has all the bubbles of the original one.
Обычная, из гавна и палок.. не заморачиваются гладкостью обводов. ну, еще навскидку- не усилен форштевнь.. имхо, на бережок носом не вылезешь. да и киль тож. Может и кривовата еще - стапеля не заметил. Зато легкая. Аж просвечивалась до покраски гелькоутом.
It was a beautiful job with little material available ... Please let us know who you are, where you are and what it is for this boat ... Thank you and congratulations! ...
i was carrying a boat like this on the back of my truck today for a friend but i understand they make these type of boats in the Dominican Republic you know the Bahamas is not far from their.
I believe it is PU Foam, but the hard type... You can research it more, as it comes in two part liquids that are mixed.It rises up and takes on any shape or mould you want.
Reading comments i see a lot of people with no talent or skills, these guys are making something with nothing to feed their familys! What have you done?
Well said! Take the average western clever dick out of their protected environment and they are like a fish out of water. Most of these critics would be helpless trying to make a living in places like this, but these lovely folks seem happy, relaxed and contented. I love them. There will always be pointless armchair TH-cam critics, full of their own cleverness and importance but utterly useless when it counts. THESE folk are the people I like and respect, those who make something wonderful from very little except their ingenuity and resourcefulness. And by the way, the organic nature of these boats is part of the beauty of areas like this. I don't want to see hugely expensive, flashy American factory fishing boats, taking all the fish from the sea and leaving nothing for the future, just to make the payments to loan company for the boat. These folk are far wiser than any critics. Bless their dear hearts.
Hello Master Som.. hope you will see my enquiry. Where did you bought those foam you use to be the backbone or beams and other parts of your boat framing system . Please indicate also the links. Thank you very much.
Who knows? I'm sure it was not easy to buy those materials and I would like to see them do it right. We poor people often say you can't afford to cut corners. Good luck to them. I hope they stay safe.
Can you please respond to my question? I am from the Philippines Mindanao area and I am a fisherman and also currently building a big boat. Can you tell me what paint or coat did you use with that boat of yours in this video?
I’ve ridden in many many boats that were built like this. They’re used for everything on the Isle of Cologne in Panama. They’re used like busses for the masses, but on the water. Rough as hell though. But this may be due to the fact that the guy operating the motor knows one setting, wide open balls out haul ass no matter what the sea conditions.
Fiber glass boat making complete video ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ th-cam.com/users/NewOneMedia2017 ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Fiber glass boat making complete video ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ th-cam.com/users/NewOneMedia2017 ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
What an interesting boat build. A boat intended for use in harbor and coastal areas. It is relatively light weight, uses a smaller hp engine of about 7 to 40 hp, has a panga hull form designed specifically for the environment this boat is constructed for and operates in. This boat is not an expensive center console monster horsepower fast boat. It’s an affordable, inexpensive functional utility boat. It can give years of useful service to its owner for minimal cost. And since it has a large amount of foam used in its construction, it looks like it has a good amount of positive reserve buoyancy in case it gets damaged and flooded with water. And when damaged, it will be simple to repair. A very useful and minimal maintenance boat.
Mate.. these boat are professional fishing boats used even 50+ mile offshore, I live in West Africa and we have even more primitive looking timber 12 meter kayak style pirogues with huge timber in the base 12 inches wide and 8 inches deep... the boats are over a tonne and run routinely with 15hp Yamaha outboards... and going usually 20 to 60 mile offshore pulling in Marlin and 5 ft yellowtail tuna on hand lines..(in the right season)... no crazy laws like the western world... but we feed the western world with our fish exports.. 😊 good luck, be happy
Thank you for your positive thoughts and details followed by.
👌👏👏👏 عاشت ايدك مستر som
Release wax is a 【tape】!
Wow~ you are genius!!!
World 1st very thin layer boat!
Great job!
God bless you ♥
From South Korea of far East
고기 많이 잡아서 부자되세요💰💰💰💰💰
Nama hatbawi
thank you very much
на ровные места можно полиэтилен с помойки приделать
I am realy happy to wach your vedio i get lost lessons from your vedio how to build the boat ,and I had stard to build and my boat is done.thankd fir good inspiration.
Вы очень хороший друг,спасибо что поделились с нами.
Fabulous... most people cry and make excuses on why they have nothing ... you made something from nothing and prospered... 👏
They certainly started with some money. Chop strand and polyester resin ain’t free.
нормальная технология. плоскодонное ,маленькое судно,очень легко можно делать. матрица простая
Excelente video gracias brotdr por compartir tus conocimientos y, de manera honesta. Saludos acá es Guerrero México. Dios te bendiga.
Excelente video, uno de los más lindos que he visto, felicitaciones gran trabajo
thank you very much
Me pongo de pie y me quito el sombrero son uds unos maestros
Very nice work 👍👍🇵🇰
Thank you very much
thats great job working wood project for son they are a blast
AWSOME.....👍👍👍👍👍
Para hacer laminados de mejor calidad es recomendable quitar las burbujas de aire que van quedando al impregnar con la resina con un rodillo metálico que vienen para eso al igual que el molde que cubren con cinta debería estar pulido , brillante, con varias capas de cera y separador como el alcohol polivinilo para que no se adhiera y poder sacar la pieza sin cortar las esquinas, esto es solo un aporte, gracias por el vídeo, buen trabajo!!! saludos desde Uruguay, Sudamérica.
No se dió cuenta que lo fabricaron con lo que tienen a mano? El método es precario y mejorable aún así no deja de ser útil. Usted está hablando de lo óptimo..le aseguro que esa barcaza no sé hundirá y le durará muchos años
Amigo que pintura es recomendable pintar por la parte de adentro y por la parte de afuera gracias
@@IgnacioRamirez-m1g la pintura ideal es el gelcoat que contiene resina poliester, aerosil (sílice impalpable), pigmento, estireno parafinado, etc., se puede hacer casera o comprarla pronta para usar, no es muy nivelante y el ideal es pintar a pistola por fuera, en el interior a rodillo o pincel, en el exterior primero se pinta el molde y luego de secar se enfibra y la resina poliester debe de ser marina porque es más elástica, saludos
Building a simple but sturdy low tech working-vessel with family and food in your mind is a wonderful thing to watch
تسلم الأيادي ، بارك الله في هذا الشيء القليل
total respect guys , you made a thing with almost nothing welldone
7m8jujm8muj8jujjuj7mujujjuujjuuj7nmuuj7njuuj7nujujujuuumjjjuu8ujuujuujuj7jijuujjuuj7mmuujjujujum7n7njuujujuuj7nujujujuujuujju7mjuuuju7mm7m7n7mm7uj7mujujjujujum77mmum7mujujujujjujum7uuujn7ujm77n7n7mujujujjuiujmuj7mk8i7jmmm7m
@@salimhaji9040 wtf does that mean??
Amazing work with nothing but skill and a few simple basic tools.
Yes, thanks
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
th-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Saludos desde cancun mexico buen video amigo gracias si sirven de mucho
Bravissimi. Con pochi mezzi a disposizione avete fatto un bel lavoro.
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
th-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Not bad for the conditions your working in, with a little extra work with some bondo I think the overall look would be much better!
Отличная работа!!!!! 👋👋👋💪💪💪Сколько слоев стеклоткани?
не толще миллиметра.
Very cool guys! I am thinking about making a recycled plastics boat with friends, totally different but if it comes out 1/2 as good as you guys' boat, we'll be elated. Thanks for sharing
Good job... to bad they don’t even clean the area where they work.
👏👏👏Excelente trabajo ,me ha gustado mucho ,felicidades por lo bien que ha salido el barco,🚣🏼♂️
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
th-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
salutations morrocco welcom
well done , and can help africa fishing industry
Thank you very much
NICE WORK MASTER SOM
I is totally impressed with this build video. You did a very good job and I like everything you did to build it. With out power tools and with only simple materials. I wish i could do as well.
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
th-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
And how strong is it?
@@mohamedsheikh6618 Hi - I think you have the beginning of a strong boat. I would put a second or third layer of fiber glass on it and it would be very much like a commercially made boat. My nephew was in the USN off the Horn and saw these types at sea 30-40 klicks out with 3 or 4 man crews. Yes they are primitive, but all the elements of a boat are there and glass enclosed. I don't think they will last 100 years but who knows. Suggest u look at the videos, especially the one with the 10-12 foot hammerhead shark. Just sayin.
@@mohamedsheikh6618 Fiberglass layered in resin is strong enough to stop a 9mm bullet with only 12mm of thickness. The hull of this boat has at least 50mm, it can hold the weight of about 7 people without breaking. It's cheap, lightweight and safe.
Mantap prosesnya.
Meu imenso respeito e felicidade ao ver isso... Parabéns!!
nice work!!
bagus sekali cara buat cetakan perahunya
Good job buddy I enjoy looking at this video thanks for sharing it it helps me a lot from the Caribbean Trinidad i am going to build a fiberglass boat 22feet
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
th-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
What a beautiful job it is to raise people!
Nice idol amizzing boat
Nice boat mga bai
Masha allah siidoow miyaa
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
th-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
th-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
nice boat
Thanks
Gd morning po idol😊😊😊😊😊
Very nice and good job
The workmanship by this man (men) to make a seaworthy boat from scratch. Doesn't seem to be stressed out rushed to get it done. That's how real quality is done. I'd buy one from this guy if I could get it back to the States without hassle. I'd even put "made by ____(name), from ___ (country). "
sea worthy it is not; for it does not have a deep vee astern,and will break your bones if slamming on waves; but it will be great for calm waters, it is long and narrow,it will be economical on fuel; i'd be a buyer too
You must not know anything about boat building? I can point out dozens of mistakes, any one of which will result in rendering that vessel un-seaworthy, but I'll just mention the most glaring. He cracked the hull in several places removing it from the mold!
Exelente trabajo los felicito
Hola primero quiero saludar de manera amable y desearles lo mejor , les escribo desde buenaventura COLOMBIA
soy fibrero de profesion desde hace muchos años y quiero decirles que en cuanto a la modalidad de trabajo de acá me quedo asombrado de como trabajan ustedes la fibra de vidrio .
ahi muchas fallas pero respecto la forma de trabajar espero mis palabras no sean ofencibas para ustedes yo también son afrocolombiano y me gustaría compartir con ustedes
Nice job👍
merci beaucoup, j'ai beaucoup apprit .
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
th-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Hello Master Som, This is a very impressive video. Thank you! I first saw it in four segments. It's much better all in one. Can you please tell me the size of this boat: length and width?
Thanks and keep up the good video and boat building work.
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
th-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
th-cam.com/video/_-gSbdqRL_c/w-d-xo.html
Tudo bem contigo
Nice job bro watching from philippines 6 12 2020 its amazing good job bro
Thanks for watching!
Good👍
whether it's from wood salam dari indonesia
Kapok tree, I think. we call it in Mindanao as Duldol.
New subscriber sir.... Thanks the idea...
Muito bom! que tipo de fita você usa?
used for cartoons tape
@@master_som thank you. Are you from Mozambique or Angola. I grew up in Luanda 1952-1976.
Ruler naaa... Free hand... Salute to the skill.
مع الامكانيات البسيطة الا انك رائع فى كل عملك ..............تحياتى لك
Bom dia. Belo trabalho. Parabéns, vocês são inspiradores. Peço permissão para fazer duas perguntas: 1. A espuma foi produzida por vocês, nesse formato parecido com pedaços de madeira, ou foi comprada já pronta nesse formato? 2. A forma original é de que material?
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
th-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
оригинал похож на бетон.
Yg buat gaiding2 itu sejenis apa sreroform atau apa
Mighty Fine Boat!
nice work m8, think i might try an build a boat like a catamaran using your method! keep up the good work!
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
th-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Nice boat building.
So glad to see that somebody in Africa? is running one day classes on boat building, this is the best how not to do it video I have seen.
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
th-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Tuyệt vời 👏👍💯.
achei muito massa, adoro ver o processo de produção. acho bonito que tem habilidade de fazer essas coisas. ficou muito massa, parabens. Qual o peso final dele voce pesou?
nao e tao dificil fazer algo assim nao cara, o que pesa mais e o preço dos materiais e o espaço pra fazer, de resto o processo e bem simples, a claro, tem que ter um pouco de conhecimento de como trabalhar com fibra de vidro, qual material usar no molde pra desmoldar
Qual o tamanho dessa embarcação? As medidas do barco. Estou fazendo um também. Parabéns pelo trabalho!
CARA O VÍDEO É BOM MAIS ESSA MÚSICA ME FEZ DESISTIR DELE🤣🤣😂😂😂😂
bagus idenya
Good job!! Looks very tight :)
Shaqo fican. Gasho gloves, kabo adag oo boots ah iyo muraayad
Bonjour vraiment des génies. Dites moi vous travaillez qu' avec du polystyrène ?👍👍👍👍👍👍👍
Yeah
❤ like it but I would like to know whn building my boat can I use only woods for instead of Iso boards to avoid the cost,
C'est super comme boulot ! Félicitations les amis. Je voudrais savoir combien de couches de fibres de verre placer pour avoir ce beau résultat ?
Have to admire the ingenuity
Sehr abenteuerliche Bootsbautechnik. Und vor allem hat das Boot dann auch genau dieselben Beulen, wie das Original! - A real adventure this kind of boat-construction! And one advantage is that the new boat has all the bubbles of the original one.
Интересная технология постройки!
Обычная, из гавна и палок.. не заморачиваются гладкостью обводов. ну, еще навскидку- не усилен форштевнь.. имхо, на бережок носом не вылезешь. да и киль тож. Может и кривовата еще - стапеля не заметил. Зато легкая. Аж просвечивалась до покраски гелькоутом.
It was a beautiful job with little material available ...
Please let us know who you are, where you are and what it is for this boat ... Thank you and congratulations! ...
Good job on the Boat fellas but I wish the Lad using the 9" Grinder/Sander was wearing a dust mask
guys nice boat.. what solution glue are you using?
thanks for the reply
Fiberglass matt with polyester resin
This boat would be great for the islanders of Australia im from there this style would be great for fishing:)
Hello. Master Som's Friend Perished. You are Make the Boat is Amazing. What is the white material called? and oil is Resin or what name?
Pretty clean site.
Sangat membantu
Sukses trus
Very nice! They should start upscaling them.
Excellent job guys. I always admire fibreglass work by manual labor and utilizing your resources available.
Which country?
In somalia🇸🇴
i was carrying a boat like this on the back of my truck today for a friend but i understand they make these type of boats in the Dominican Republic you know the Bahamas is not far from their.
hola buenas noches antes de poner las cintas hay que aplicar algo???
Iyo eelaay bukuroow
How much better it would be to work to clean things up.
thank you
Thansk for this video. So detail, honest finish with greath.
thank you
Good job bro...I have a question, is the yellow material you use sponge?
I believe it is PU Foam, but the hard type... You can research it more, as it comes in two part liquids that are mixed.It rises up and takes on any shape or mould you want.
@@karaitaukarai7208 thank you so much bro...
Y no tienen a la venta algún catalogo para hacer uno pequeño
If you make the tear-off edge sharp you save lot of fuel.
You can just use some filler and sandpaper. It's worth the effort! Cheers
Reading comments i see a lot of people with no talent or skills, these guys are making something with nothing to feed their familys! What have you done?
Thanks for your encouragement, and we try to help people from here
Well said! Take the average western clever dick out of their protected environment and they are like a fish out of water. Most of these critics would be helpless trying to make a living in places like this, but these lovely folks seem happy, relaxed and contented. I love them.
There will always be pointless armchair TH-cam critics, full of their own cleverness and importance but utterly useless when it counts. THESE folk are the people I like and respect, those who make something wonderful from very little except their ingenuity and resourcefulness. And by the way, the organic nature of these boats is part of the beauty of areas like this. I don't want to see hugely expensive, flashy American factory fishing boats, taking all the fish from the sea and leaving nothing for the future, just to make the payments to loan company for the boat. These folk are far wiser than any critics. Bless their dear hearts.
With just minimal aid from technology they can build a quality products. Kudos to all this man.
@@Tampo-tiger I agree. I love the ruggedness of these boats and the ruggedness of the builders! awesome to see
I think they sell these high quality boats to Somalia pirates.
при мощном двигателе она развалится
where are these boats made
🇸🇴 Somalia
Nice haul shape. What is the type of wood you used for framing?
That's foam.
Thanks master som
Good job, Weldon
Hand laid fiberglass way stronger!! Awesome!!
Exelente pero pero creo pueden mejorarla por ejemplo en la parte de atrás donde va el motor una cubierta para darle más resistencia a esa zona
Que tipo de madera es?
Hello Master Som.. hope you will see my enquiry. Where did you bought those foam you use to be the backbone or beams and other parts of your boat framing system . Please indicate also the links. Thank you very much.
brapa kilo resin yang di butuh kan untuk 1 boat?
@@rustami5992 Sorry... can't understand.
Why do they work in such a messy environment haven’t they got a simple broom and raise it of the ground for ease of working
Who knows? I'm sure it was not easy to buy those materials and I would like to see them do it right. We poor people often say you can't afford to cut corners. Good luck to them. I hope they stay safe.
I'd say it's sheer ignorance.
Can you please respond to my question? I am from the Philippines Mindanao area and I am a fisherman and also currently building a big boat. Can you tell me what paint or coat did you use with that boat of yours in this video?
Polyester topcoat
Meu deus fabriquei lanchas de fibra por 7 anos infelizmente estão na idade da pedra ainda mas mesmo pelo fato de serem pauperrimos são muito criativos
It cost $6000 to build this is Somalia
Which kind of wood do you use?
panel faom
I’ve ridden in many many boats that were built like this.
They’re used for everything on the Isle of Cologne in Panama. They’re used like busses for the masses, but on the water.
Rough as hell though. But this may be due to the fact that the guy operating the motor knows one setting, wide open balls out haul ass no matter what the sea conditions.
th-cam.com/video/7CFO0fHx1Fo/w-d-xo.html
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
th-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ
സബ്സ്ക്രൈബ് ചെയ്യണം.
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
th-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.