2015 Yamaha Grizzly 700 Review, how's it held up? over 4500 miles

แชร์
ฝัง

ความคิดเห็น • 137

  • @rodneyfarwell3396
    @rodneyfarwell3396 ปีที่แล้ว +11

    This is an excellent in depth review. To me the long term reviews are much better than new machine reviews as it actually gives some information on long term reliability. Overall it looks like your machines have held up very well but you also do a great job of maintaining them. It's amazing how well these machines hold up with the beating they take on the rough terrain. Can't wait for the next video!

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +2

      Hey Rod, Yup I agree with the abuse we put the machines through Going through deep water with the dust in the mud gets caked on everything I’m surprised there isn’t more stuff that worn out. Been pretty happy with the grizzly.
      Yes I agree the long term reviews are much more helpful showing what actually wears out on whatever you’re reviewing.
      Working on the next video right now.
      Thanks for checking out the video buddy!

  • @SaskXplorer
    @SaskXplorer ปีที่แล้ว +8

    Just purchased a 22 Grizzly last year, loving it so far. Can't beat that yamaha reliability. My buddies were giving me the gears why I didn't go with a outlander 850 or somthing similar. I rode my friends brand new 850 xmr and wasn't all that impressed. When they weigh 1000lbs dry, it's not that fun in my opinion. Thanks for the review, hopefully I put on the same amount of mileage as you guys, Cheers!!

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +1

      Hi SaskXplorer, Yup you’re exactly right the weight is a big factor! I love how nimble the grizzly feels went out busting up the trails.
      Thanks for checking out video!

  • @shawnantel8238
    @shawnantel8238 ปีที่แล้ว

    Old grizzly been put through her paces that’s for sure! Build quality is a little higher than some of the other brands. Can’t wait for the next one buddy! Thanks for sharing!

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +1

      Hi Shawn you bet they’re built pretty good!
      I’m happy it’s still holding up.
      The few repairs I’m going to do isn’t bad.
      Thanks for checking out the video!

  • @stevemiller4148
    @stevemiller4148 ปีที่แล้ว +1

    Still in good shape for the mileage, you definitely take of ur equipment. Can’t wait to see the seal and brake videos.💪🏻👍🏻👏🏻

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      Hi Steve, yeah she’s getting some miles on her. LOL
      will do some maintenance and keep it rolling!
      Thanks for checking out video!

  • @Solly937
    @Solly937 ปีที่แล้ว +1

    Looking forward to the next video.

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      Hi Kurt yeah buddy hopefully you enjoy the next few videos! Thanks for watching

  • @TheTacticalHouse
    @TheTacticalHouse 25 วันที่ผ่านมา +1

    I just bought the exact model/same color with 102 hours on it. My dash is down further and the key on right side by the outlet. Love the machine

    • @kcatv9556
      @kcatv9556  24 วันที่ผ่านมา +1

      Wow, that’s pretty low hours for that machine!
      Should be a good one. Have fun on your rides. Thanks for checking out the video!

    • @TheTacticalHouse
      @TheTacticalHouse 17 วันที่ผ่านมา

      @@kcatv9556Yep super low hours and miles. However noticed some peeling on the frame under the factory skids.. factory wheels peeling too. Maybe got a bad batch of coatings that day. 😂

  • @timalmich1964
    @timalmich1964 ปีที่แล้ว

    Good in depth video. after 4500 miles it is holding up pretty well. And ride that thing pretty hard. Yamahas are great machines.

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      Hey Tim, Yeah I agree it’s held up pretty well I’m happy with it. Thanks for checking out video bud.

  • @ManzanoManATVAdventures
    @ManzanoManATVAdventures ปีที่แล้ว +1

    Great video! Anyone watching this video to help them decide on buying an ATV should put an honest review first. I have been watching you guys for a while and have kept up with all your issue and modifications. To have 4500 miles on it and to have the few issues you talked about is in my opinion not bad at all.I look forward to watching your installment video on the repairs you talked about.

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      Hey Ruben, yeah I agree a review on a machine after it has quite a few miles gives you a better idea of issues it might have?
      Also shows how long things last. I bet you’re getting quite a few miles on your machines?
      I’m pretty happy with the way it’s held up hopefully I’ll get a few more years. Thanks for checking out the video my friend!

  • @PurpleOnThree
    @PurpleOnThree ปีที่แล้ว

    I just learned in September about the Dyna Jet from a Spyder rider I met at Spyders in the Ozarks.... So cool!

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +1

      That’s interesting. Are you guys planning on doing the Ozark ride this year?
      We’re thinking about trying to make it to that ride with the Spyder this year.

  • @ranger6x660
    @ranger6x660 ปีที่แล้ว +2

    You guy's sure do make some great videos. My first machine was a 2002 Grizz 660. It was a great all-around machine. I plowed tons of snow with mine. I sold it in 2012 and went with a Can Am Commander 800 XT. It didn't do what I wanted and traded it in 2015 for a new Ranger 800 6x6. It's a beast and does everything well. My local Fire Dept. wants it so before it gets any older I decided to sell it to them. So now I'm back to looking for another machine. I missed having a quad so the two I'm looking at are the 23 Grizzly 700 or a 23 Polaris Sportsman 850 Ultimate Trail Edition. I'll be test riding both in the next week. Trail riding, hunting and plowing snow are what my main uses are for having one. I have a 2022 JD tractor to do most everything else. Again, great videos! Thanks for sharing!

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      Hi Ranger, I’ve been happy with this machine so far. Hopefully I can get another 4000 miles out of it.
      Good luck figuring out which quad you want to go with the Yamaha or the Polaris.
      Thanks for checking out the video appreciate the comment!

    • @ranger6x660
      @ranger6x660 ปีที่แล้ว

      @@kcatv9556 an update. I ended up going with the Sportsman 1000 XP Ultimate Trail Edition. Safe travels

  • @PatTheBaker855
    @PatTheBaker855 ปีที่แล้ว +1

    Thanks for another video man and thanks to you ive saved up enough and got a 2022 Grizzly SE. Im always impressed with your machine so I figured its time to get one lol

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      Hi Cody, back when I was trying to figure out what to buy took me a few months of research on all the Japanese machines and finally I settled on the grizzly.
      I have no regrets I think it’s a great machine. If you end up getting one hope you have good luck with it!
      Thanks for checking out the video.

  • @cooptroop5
    @cooptroop5 ปีที่แล้ว

    Good report!👍

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      Thanks buddy, had somebody from out of the country asking about your clutch. Not sure if he contacted you or not.
      Thanks for checking out the video!

  • @TVL2500ls
    @TVL2500ls 5 หลายเดือนก่อน +2

    Sehr gutes Video, und sehr gute Maschine 👍

    • @kcatv9556
      @kcatv9556  5 หลายเดือนก่อน

      Thanks, appreciate you checking out the video!

  • @bakervinci163
    @bakervinci163 5 หลายเดือนก่อน

    These are great units. I had guy pick mine up , because he wanted to buy it . He said he put 1/2 a mile on it and it quit running. I had just put a new starter and changed the oil a filter. After 3 months I asked to pay me and he said his mechanic said they were hard to work on. I picked it up and it was locked up and the engine oil was below the dip stick. He put at least 30 hours on it. He sent me a video of the odometer that he said he took( he does not know that the video he sent me is one I took and placed on fb sell site). I changed the oil at every 50 hours and the unit ran beautifully . I pulled your video to see how to read the odometer. My bike is currently at the Yamaha place . They are going to send me the new odometer readings.

    • @westernslopermax216
      @westernslopermax216 2 หลายเดือนก่อน

      Does it happen to be a 2016-2018 model with the 708 engine?

  • @randybrown9729
    @randybrown9729 3 หลายเดือนก่อน

    Enjoy your videos. Thinking about buying an ATV mainly for hunting and pulling out firewood, but considering some trail riding. Was only looking at honda but now also looking at the yamahas also.

    • @kcatv9556
      @kcatv9556  3 หลายเดือนก่อน

      Thanks for checking out the videos Randy!

  • @MrSprintcat
    @MrSprintcat 3 หลายเดือนก่อน

    19 k views, u would think people would subscribe, this was a good video .thank you .looking forward to more.👍👍

    • @kcatv9556
      @kcatv9556  3 หลายเดือนก่อน

      Hi MrSprintcat glad you liked the video. Appreciate you checking it out.

  • @stacyreid5077
    @stacyreid5077 ปีที่แล้ว +1

    It’s great that you have got that many miles on it with very lil trouble and my 06 Rhino was tough it even held up after I put a 6” original first generation Gorilla lift with the brackets that drop the original A-arms down to 6” lower, I put over 2500 miles on it

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +1

      Woo wee you had that sucker modified didn’t you.
      Hopefully I’ll get another 4500 out of it. Thanks for checking out the video my friend.

    • @stacyreid5077
      @stacyreid5077 ปีที่แล้ว

      @@kcatv9556 I changed out the stock Rhino CDI unit for a Grizzly stock CDI which added about 5 hp to it because for some reason Yamaha thought they should downgrade the power of the Rhino. Shoot that big heavy thing needed all the power it could get even when it is totally stock

  • @GILLFAMILY
    @GILLFAMILY ปีที่แล้ว

    Great video. Thanks for sharing,

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      You’re welcome, thanks for checking out the video.

  • @gregdavis5339
    @gregdavis5339 ปีที่แล้ว

    As always I enjoy your videos and I especially have interest in your breakdown/how to videos. The only thing i dont enjoy is the urge your giving me to go find a similar Grizzly lol. You also seem to be the type of person i want to sit down with and just pick your brain because you seem to have alot of knowledge, take care and ill see you on your next video

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +1

      Hi Greg, thanks for the kind words. If you end up getting a grizzly I’m sure you’ll have fun! You should enjoy the next few videos.
      We’ll be doing the maintenance on the machine. Thanks for checking out the video.

  • @alexb1638
    @alexb1638 6 หลายเดือนก่อน

    Awesome sir thank you

  • @SCOTIAN_
    @SCOTIAN_ ปีที่แล้ว +1

    You sure got the miles on that unit ! I liked that you played with the engine lol
    If Q didn’t buy a new machine every 5 yrs he probably could get some elkas , instead of talking about it lol . I’m sending mine in for a rebuild in the following months .
    Good video I enjoy hearing about others units and the issues or no issues

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      Hey Scotian, Yup I agree you can really find out how a quarter motorcycle hold up after you get some miles on them. Haha yeah Q got the hankering for some Elka’s don’t know if he’s gonna get em or not?
      Hopefully I can get another five years or so out of the ol grizzly. Thanks for checking out video my friend!

  • @flyingbriando5521
    @flyingbriando5521 ปีที่แล้ว

    Keeping my fingers crossed that I’ll be having the same luck with my Grizz at 4500 miles!

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      Hey buddy!, Oh yeah I’m sure you will!
      I know you guys take care of your stuff.
      Thanks for checking out the video my friend.

  • @PurpleOnThree
    @PurpleOnThree ปีที่แล้ว

    Those are very clean and nice looking especially for the mileage!

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +1

      Hi Jody thanks a lot!
      it’s not easy keeping the machines nice when running the off-road trails.
      Thanks for watchin!

    • @PurpleOnThree
      @PurpleOnThree ปีที่แล้ว

      @@kcatv9556 I know...our 2004 Kodiak is always filthy... Your whole garage looks spotless! 😁💜👍

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +1

      @@PurpleOnThree Yup off-road machines sure do get dirty! LOL Thanks!

  • @tylerbehnke6307
    @tylerbehnke6307 ปีที่แล้ว +1

    My 2014 Griz has a better build quality then my 2022 Griz. Mine are all stock with no problems what so ever with most of my trails are rock and old mine tailings.. I enjoy all your videos so keep up the good work. Its time to come up North to WI for some riding. That state does a good job in providing miles of trails up by the big lake.

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      Hi Taylor, Yeah I think that build quality on the grizzly is pretty respectable.
      Glad you enjoy your videos. WI is one state we haven’t ridden in yet.
      May have to do some research and plan a trip up that way!
      Thanks for checking out the video my friend.

  • @bigbarnabas4799
    @bigbarnabas4799 7 หลายเดือนก่อน

    Good content

    • @kcatv9556
      @kcatv9556  7 หลายเดือนก่อน

      Thanks, appreciate you checking out the video!

  • @TwistyMcbudz
    @TwistyMcbudz ปีที่แล้ว

    I have the same year model as you except in camo , most reliable there is out there I have 9000km of pulling fish hut, mudding,hunting, pit riding,probably 2000km of wheelies in that 9000km lol. Only had to change 2 rear axels a drive shaft seal ,2 4x4 switches,brake pads and I just bought a new battery today so in my opinion toughest bike out there considering what I've put it through. Oh yeah I've even sunk it twice and it's still going strong compared to any of my buddies Polaris, can am ,brute force quads that haven't been through half of what my grizzly has and their bikes are broken all the time with crazy repair costs

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +1

      I hear you bud. The guys I ride with have gone through three Polaris sportsman‘s, and I’m still on the same Yamaha grizzly. These machines were built to last. Thanks for checking out the video!

  • @leesquiller1901
    @leesquiller1901 7 หลายเดือนก่อน

    I have a 2018 grizzly 700, like it so far , probably going to switch to those tires for winter plowing

    • @kcatv9556
      @kcatv9556  7 หลายเดือนก่อน +1

      Hi Lee, good to hear you like your grizzly so far. Thanks for checking out the video.

  • @kcatv9556
    @kcatv9556  5 หลายเดือนก่อน

    Hi Baker, something sounds a little off with that deal. Maybe somebody’s trying to get away with something not sure?. Thanks for checking out the video!

  • @quaddingsous
    @quaddingsous ปีที่แล้ว +1

    You've kept that thing in good shape. I'm thinking if you put the Yamaha gear oil back in your rear end, your leak will disappear. But then again, you're a mechanic and I'm not, so what the hell do I know - LOL
    I'd love to try those Elka shocks, but I can't justify the price. I could probably buy a new engine for the cost of those things - LOL
    Thanx for the walk-around buddy! Very interesting!

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +2

      Hey Buddy, What the hell do you know? Hahahahaha OMG you crack me up!
      If I done that then I wouldn’t be able to do a seal replacement video. Where’s the fun in that eh?
      Had to throw that eh in there for ya buddy LOL
      Yeah the Elka’s are expensive hard to say if they would be worth it for you or not. Thanks for checking out the video buddy.

    • @quaddingsous
      @quaddingsous ปีที่แล้ว

      @@kcatv9556 🤣🤣🤣

  • @nortonashburn6119
    @nortonashburn6119 ปีที่แล้ว

    I just sold my 16' had 9300+km and 595 hours. No issues at all. Picked up a 23' grizz.

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      Yep they will run for a long time. Good luck with your new 23!. Thanks for checking out the video!

    • @josephlapointe3715
      @josephlapointe3715 2 หลายเดือนก่อน

      How much did you sell it for?

  • @m8sandman
    @m8sandman หลายเดือนก่อน

    I have over 6,000 miles on my 22 and haven't done a thing except change the oil and filter. Still runs and rides like new. Love the Grizzly most reliable quad made.

    • @kcatv9556
      @kcatv9556  หลายเดือนก่อน

      Wow!, That’s a lot of miles. Glad to hear you’ve had no issues.
      They built them to last. Thanks for checking out the video!

    • @wesleygarrett2423
      @wesleygarrett2423 7 ชั่วโมงที่ผ่านมา

      Have you adjusted the valves on yours yet or just let it be since it’s running good? I have 1400 on mine and I haven’t checked mine yet

    • @m8sandman
      @m8sandman 7 ชั่วโมงที่ผ่านมา

      I've never seen the valves out of adjustment on the 686 motor. Owned a 07 Raptor for 14 years and put tons of hours on it. Checked them just before I sold it and they were still in spec. If they come out of adjustment it will get harder and harder to start, until that happens I wouldn't sweat it.

    • @m8sandman
      @m8sandman 6 ชั่วโมงที่ผ่านมา

      I've owned Raptors since 07 and never had the valves come out of spec on any of them. It will start to start harder and harder if they do. Unless that happens I'm not going to worry about them. I just bought a 24 Grizzly to use for my summer ride at the end of May. Have almost 800 miles on it already. I ride every weekend, only miss a few a year.

  • @viperxbr
    @viperxbr ปีที่แล้ว +1

    Nice looking machines KC! I was considering trading in my 22' Outlander 650 for a new Grizzly but I've already done a few big updates(Elka S3 shocks, MBRP Exhaust, RJWC Nutrino headlights, cargo box, Tessaract gas tanks, skid plates, etc...) to it so I'll stick it out for a couple more years and see how it goes. I'm the same way with tinkering and maintaining all my vehicles/power machines. I've been burned having others work on them. It would be last resort or warranty work. I have a double car garage but not a nice big shop with a lift like yours...very jealous btw! I am now using full synthetic (Amsoil severe gear oil) in both diffs and the trans. For the engine I've gone with the Penzoil Platinum 5w40 full synthetic. I use the same oil in all my vehicles (different weights of course) and it's great. Way cheaper than the ATV oils ($8/L vs $18-$25/946ml(Quart)) and I change it every 30 hrs(gear/trans oils will be every 60hrs). I don't have any wet clutch in the Can Am so I don't need the premuim ATV specific oil. I'll be starting a channel soon so I'll introduce my ride as the first video. Take care! Cheers!

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +1

      Hey Todd, Yeah sounds like you’ve done quite a lot to the Outlander lot of accessories too. Yeah for sure working on your own stuff you always take more care in it.
      I like Amsoil as well, it’s good stuff!
      I run Amsoil in the rear diff of my truck.
      Thanks for checking out the video and appreciate the comment my friend!

  • @reddfoxx2861
    @reddfoxx2861 ปีที่แล้ว +1

    If you had to buy another one tomorrow would you go to a twin cylinder or another grizzly. Excellent video.

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      Hey Redd Foxx, that’s a great question I sure would like to have the twin but, with the type of riding we do not very often I would get to open it up. So I will probably just go with the grizzly.
      it’s lighter more nimble through the tight trails and has plenty of power for trail riding. Thanks for checking out the video.

  • @normsatv
    @normsatv ปีที่แล้ว +1

    Wow kc getting good wear & tear out those bikes . I also need do one rear seal lol better look close at my front to i guess 😳👍

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      Hey Norm, yeah buddy we put our quads through A beating. A little maintenance keeps them going though eh
      Cheers my friend!

  • @Coolkitty639
    @Coolkitty639 ปีที่แล้ว +1

    I believe ITP Holeshot ATR's are lighter. Claimed weight: fronts are 16.5 lbs the backs are 23 lbs. I just weighed my new ones mounted on oem spun alum. wheels, similar to yours. Mounted fresh: fronts 22 lbs 9 oz, rears 30 lbs 14 oz.

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      Hey Coolkitty639, Thanks for the tip on the tires.
      I’ll have to look into those when it’s time to get some new ones. If I’m not mistaken I believe the daughter’s Renegade has those on it as a factory tire.
      Thanks for checking out the video.

    • @Coolkitty639
      @Coolkitty639 ปีที่แล้ว

      @@kcatv9556 Yes they are the Renegade tires. The Bighord 2.0's, Maxxis Zilla's, and Quadboss 672's are among the lightest. I get a little obsessed with tire weights. I'm eager to try the atr's in the spring.

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      @@Coolkitty639 haha good to know I’m not the only one obsessed with the weight of a tire. LOL
      The factory always seems to put a really light tire on them and then when you change and put aftermarket tires on the machine never feels the same.

    • @Beaudoinam
      @Beaudoinam ปีที่แล้ว

      How about itp Terra cross those are radials and can am puts those on stock, my guess is those are pretty light as well.

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +1

      @@Beaudoinam Yeah I did look at those as well but didn’t like their profile. Wanted more of a flat profile.
      Appreciate you checking out the video!

  • @trailblazeratv6306
    @trailblazeratv6306 10 หลายเดือนก่อน

    Mobil 1 synthetic suppose to have additive in it to treat the seals., I don't know if that helps with leaks though

    • @kcatv9556
      @kcatv9556  10 หลายเดือนก่อน

      Hey trailblazer, I have not heard of that.
      Thanks for the tip and appreciate you checking out the video!

  • @kevinlazar8537
    @kevinlazar8537 ปีที่แล้ว +1

    Hard to beat a Yamaha!

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      Hi Kevin, it’s held up really well I’m happy with it. Thanks for checking out the video.

  • @jebm95
    @jebm95 ปีที่แล้ว +1

    I have a 2020 grizzly love it I have an ehs tuner thinking of doing more mods to it would you say the cam was worth it and the valve springs?

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      Hi Justin, I believe it was worth it seem to pick it up pretty good. I think EHS has a nice cam set up you can purchase from them. Thanks for checking out the video.!

  • @WildUrbanAdventures
    @WildUrbanAdventures 7 หลายเดือนก่อน

    Where did you get that bar for your tach gauge? What is the bar called?

    • @kcatv9556
      @kcatv9556  7 หลายเดือนก่อน

      I fabricated that bracket myself. You can use old hand guards for the clamp bracket to fit on the handlebars and then you can fabricate onto that for different mounts.
      Hope that helps you out. Thanks for checking out the video.

  • @Comeoffitman
    @Comeoffitman 5 หลายเดือนก่อน

    When the front end started getting spongy did you try to tone it down with new parts versus fixing them?

    • @kcatv9556
      @kcatv9556  5 หลายเดือนก่อน

      Not sure what you’re talking about front end getting spongy?. Thanks for checking out the video!

  • @factionfx
    @factionfx ปีที่แล้ว +1

    Great video! I have a 14 and a 19. Both purchased in the last year with only 30 hours on them. If you replace those rear axle seals I would probably go ahead and replace rear wheel bearings and those bushings. And use one of those special tools to grease the wheel bearings. How often did you grease those rear bushings? I want to pull those knuckles and add the 45 degree zerks and grease the wheel bearings in at least my 19.

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +1

      Hey factionfx, Haha how did you know. LOL
      yup be sure and check out the next couple of videos where I do the rear axle seals, wheelbearings, front brake pad replacement.
      I greased those rear arms after every ride. The kind of conditions we ride in though the water still got in there.
      Yes I did buy one of the wheel Bearing Packers and will be packing the new.
      Thanks for watching and appreciate the comment!

    • @factionfx
      @factionfx ปีที่แล้ว

      @@kcatv9556 I appreciate you sharing the knowledge with us!

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      @@factionfx you’re welcome we appreciate you checking out the videos!

  • @RHWMUSIC-1
    @RHWMUSIC-1 หลายเดือนก่อน +1

    I have a 2015 grizzly 700 efi and have had to replace nothing but the battery and brakes once still runs like new and has 5,600 miles

    • @RHWMUSIC-1
      @RHWMUSIC-1 หลายเดือนก่อน +1

      Going to be replacing the front and rear axles soon just because the boots are torn in the rear and letting mud and water in them and starting to make noise when turning sharp..

    • @kcatv9556
      @kcatv9556  หลายเดือนก่อน +1

      Yep, I hear ya. They will run a long time! Thanks for checking out the video much appreciated!.

    • @kcatv9556
      @kcatv9556  หลายเดือนก่อน +1

      @@RHWMUSIC-1 I tore a boot last year on the rear axle myself. I installed a new boot with grease, but it is starting to make noise when turning sharp as well. Yep, I will probably be putting axle in at some point too.
      Thanks for checking out the video, my friend!

    • @RHWMUSIC-1
      @RHWMUSIC-1 หลายเดือนก่อน

      @kcatv9556 absolutely! I enjoy it and have been a subscriber for a few months now! Keep up the good work friend!

  • @miillersoffroad
    @miillersoffroad ปีที่แล้ว

    Man that's impressive. The synthetic oil leaking thing I have always heard myself. I run full synthetic in everything on my machine though. Any particular reason why you prefer a radial tire? I've always used standard non-radial tires so I have no experience with radials. When I was shopping for tires I was after the same thing you were, the least amount of weight but still a decent tread pattern for trails NOT MUD RIDING! After a ton of research I settled on CST Ancla's. I'm very happy with my decision. They have a nice stiff sidewall and get great traction in all terrains. Plus there's no vibration even on pavement, nice and smooth.

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +1

      Hey Buddy, I prefer radial tires for the ride quality. They soak up the bumps much better than a bias ply tire.
      The older you get the more you need something that rides smooth. LOL
      Thanks for checking out the video!

    • @miillersoffroad
      @miillersoffroad ปีที่แล้ว

      @@kcatv9556 think I'm gonna have to make the switch then 🤣

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +1

      @@miillersoffroad Oh heck buddy you can wait a few years! Haha your Young! 😁😁

    • @miillersoffroad
      @miillersoffroad ปีที่แล้ว

      @@kcatv9556 yeah but I'm all about a smoother ride 🤣🤣🤣

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      @@miillersoffroad I see.. 👌

  • @michaelstewart9241
    @michaelstewart9241 4 หลายเดือนก่อน

    What make of battery did u replace the original with?

    • @kcatv9556
      @kcatv9556  4 หลายเดือนก่อน

      Extreme, from batteries plus.
      Thanks for checking out the video!

  • @MidwestAtvGroup
    @MidwestAtvGroup 9 หลายเดือนก่อน

    Weak point in those diff seals on grizzlies, I changed bunch of them and using yamalube.

    • @kcatv9556
      @kcatv9556  9 หลายเดือนก่อน

      Yeah, I imagine I’ll have to replace them again at some point.
      I’ve been lucky with the Kodiak, they haven’t started leaking yet.
      Thanks for checking out the video and dropping a comment.

  • @jayone7437
    @jayone7437 ปีที่แล้ว

    Have you had any problems with your LED bulbs. I had a yamaha dealer tell me they don’t sell LED bulbs because vibration breaks them. What bulb are you using.

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      They are actually HID bulbs with a starter ballast. I’ve had no issues with them work perfectly. I done a video on the install of them a few years back. You can look back through my channel and find that video if you would like.
      Thanks for checking out the video and commenting much appreciated!

    • @jayone7437
      @jayone7437 ปีที่แล้ว

      You bet. I’ll locate it. Thanks

  • @W1NDOWS7myIDEA
    @W1NDOWS7myIDEA 3 หลายเดือนก่อน

    Man I have no idea how you’ve kept your footwells from blowing apart. My footwells are toast after 1,500mi. I guess I just take some unlucky hits.

    • @kcatv9556
      @kcatv9556  3 หลายเดือนก่อน

      Yup I hear ya mine do have a couple of cracks in them. I repaired them with a piece of sheet metal on the backside and some rivets. Wish they would have made them out of some flexible plastic and not something that would crack.
      Thanks for checking out the video. Much appreciated!

  • @amurgatroyd
    @amurgatroyd 9 หลายเดือนก่อน

    We're the Elka shocks worth the money ?

    • @kcatv9556
      @kcatv9556  9 หลายเดือนก่อน +1

      Hi Anthony, yes, the shocks were worth the money in my opinion. They do require more maintenance than a stock shock though.
      but the ride improvement is worth it.
      Thanks for checking out the video !

  • @atvrider1805
    @atvrider1805 ปีที่แล้ว

    I have a 15 year old belt in my old 700

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +1

      That’s pretty good! Those belts will last a long time. Thanks for checking out the video.

  • @alexb1638
    @alexb1638 3 หลายเดือนก่อน

    Do you do break ins on your machines? A buddy of mine says you should break it in like you ride it. Any truth to that?? Don’t want to destroy my brand new machine

    • @kcatv9556
      @kcatv9556  3 หลายเดือนก่อน

      Yes, when our machines were new, I rode them a little bit easier than I normally would during the break in. Period.
      Oft and on the gas a little bit to get all the gears worn in also did not do high RPM right off the bat. Hope that helps you out. Thanks for checking out the video.

    • @alexb1638
      @alexb1638 3 หลายเดือนก่อน

      @@kcatv9556 thank you sir!

  • @PurpleOnThree
    @PurpleOnThree ปีที่แล้ว

    Dang...battery should have lasted longer...knock on wood...my 2018 F3 still has original battery

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +1

      That’s good you haven’t had to replace the battery.
      Same way with the wife’s machine still has the original battery. Thanks for watching!

  • @SmarOneNine
    @SmarOneNine ปีที่แล้ว

    Where do you live? I want you as my mechanic , Don’t know what I would do with someone who knows what there doing actually talking about.

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +1

      Hi SmarOneNine, Thanks for checking out the video. Yup I am a mechanic work on cars for a living.

    • @SmarOneNine
      @SmarOneNine ปีที่แล้ว

      @@kcatv9556 I just bought a brand new 2023 yamaha grizzly 700 eps se, any tips on breaking them in properly? it's my first brand-new atv.

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +1

      @@SmarOneNine congrats on getting a new quad. When we bought our machines, It was our first brand new ATVs as well.
      I would recommend changing the engine oil at 30 hours for the first couple of times. Also, I just ran the standard non-synthetic basic engine oil from Yamaha or Honda. Then after that, I went to a more expensive synthetic. Other than that just take it easy on it for the first little while, you should have good luck with it.
      Thanks again for checking out the vid.

    • @SmarOneNine
      @SmarOneNine ปีที่แล้ว

      @@kcatv9556 Thank You! 🙏

  • @joeellis2692
    @joeellis2692 ปีที่แล้ว

    I had the 2016 Grizzly 708. Machine gave me nothing but problems. Most unreliable machine I've bought new. Actually the most unreliable machine I've ever had. You name it I had those problems. I should have bought a king Quad or at least the base model Kodiak for 6,400.
    I'm currently riding a 21 CFMOTO cforce 800 XC so far that Chinese tank has been more reliable and faithful.

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว +1

      Hi Joe, man that sucks you had a bunch of issues with your 16 grizzly.
      I’ve been pretty happy with this machine hopefully I can keep it around many more years. Thanks for checking out video!

    • @joeellis2692
      @joeellis2692 ปีที่แล้ว

      @@kcatv9556 The 708 motor will eventually give out on you. There's a lot of problems with that motor. If that 4x4 switch engages at a high speed you'll blow your differential. I did. Canada force Yamaha to stop producing that motor. Rather than recall it. Yamaha just canceled the contract with Subaru for making it and went back to the Yamaha 686. Way cheaper than build what most customers are asking for.
      I've wanted a Grizzly since Yamaha started making them. Finally got financially stable to pull the trigger and I got stuck with a lemon. It is what it is.
      The only way I'm buying another Yamaha new from a dealer is if Yamaha put the 850 in the Viking. Hell I'll settle for a 700 v-twin or anything bigger. The 686 in the Viking isn't big enough for me.
      At this point in my life. My wife and I would like a side-by-side but I want a 2" lift with 28" or 29" tires and have plenty of power to pull that machine under a load as well as play. I love what Yamaha has to offer other than the Grizzly and Viking being left behind in the power house lineup.
      Sorry I ranted on you. You currently have had better luck with the 708 than I. I hope it continues for you Sir.

  • @willc3586
    @willc3586 ปีที่แล้ว

    My friend had elkas on his Kawasaki brute Force 750 and my grizzly still rode better than his

    • @kcatv9556
      @kcatv9556  ปีที่แล้ว

      Hi Will, yeah, I can imagine that Kawasaki brute force seem to have a stiff ride.
      Thanks for checking out the video!

  • @birindab
    @birindab 5 หลายเดือนก่อน

    Seven years for 4500m that
    😂😂😂😂😂That's how much we go through every year

    • @kcatv9556
      @kcatv9556  5 หลายเดือนก่อน

      Thanks for checking out the video!