I’ve purchased 2 remotes and I do the set up exactly like you. But at the end when I release the button on the remote, the garage opener beeps twice. Neither remote will work.
Unfortunately, the only way is to completely clear the memory of each of the motors, as the motors learn the remote. You could then reprogram each remote to each motor you wish to operate.
Hi, I accidentally reset my coding and I had to reset my open and close so when I set my remote the door only opens about 500 mil and stops, but when I use the buttons on the unit, it opens fully and closes fully, but only when I use the remote it’s only opening a little bit and stops and then closes. What do I need to do?
I would recommend resetting the limits on the opener - Sounds like the opener has a few issues going on there! You can find the steps on how to do so by googling the manual of your opener, or by visiting our manual database on our website :) garagedooropenerremotes.com.au/manuals-and-downloads/automatic-technology-australia-manuals
No, it will not. These two remote controls operate on different frequencies and encryptions. If you have a PTX4, you would need to stick with the PTX4.
![Easy Reset! Fix Your ATA GDO8 Roller Door Opener in Minutes that’s not working [118]](http://i.ytimg.com/vi/7rUrD5rj5Is/mqdefault.jpg)
Thank you, that demonstration is so much better than the QR coding.
Glad it was helpful!
I was struggling to work it out but this video was very helpful!
Thanks that worked with the wall mounted remote as well. Much appreciated!
Thanks, that was much simpler than the universal remote.
You're welcome!
I’ve purchased 2 remotes and I do the set up exactly like you. But at the end when I release the button on the remote, the garage opener beeps twice. Neither remote will work.
Thank you.😀
Works great thanks team
how can I remove a remote from one of my doors. I.e it is programed to open 4 different doors. I only want it to open one of them.
Unfortunately, the only way is to completely clear the memory of each of the motors, as the motors learn the remote. You could then reprogram each remote to each motor you wish to operate.
Hi, I accidentally reset my coding and I had to reset my open and close so when I set my remote the door only opens about 500 mil and stops, but when I use the buttons on the unit, it opens fully and closes fully, but only when I use the remote it’s only opening a little bit and stops and then closes. What do I need to do?
I would recommend resetting the limits on the opener - Sounds like the opener has a few issues going on there! You can find the steps on how to do so by googling the manual of your opener, or by visiting our manual database on our website :)
garagedooropenerremotes.com.au/manuals-and-downloads/automatic-technology-australia-manuals
Thank You.
I am trying to program a new remote but it won't accept it
What model motor and what remote control are you trying to program?
Will ptx v4 remote work on ptxv5 v2
No, it will not. These two remote controls operate on different frequencies and encryptions. If you have a PTX4, you would need to stick with the PTX4.
My dro not operation ss