Wow dami nman dugtong yan aksaya,ako non kinabit ko ung hose sa hose 1 dangkal lang at ininit ko sa gasera yung dulo ng pvc at sinuksok ksa hose at gnon din sa isa pa hose o dihumaba na ung hose ko nakakapag dilig nko ng halaman ,1986 pa yun ngayun ay 77 yrs.old na ako,
Wow! Really, this is a very nice & ever useful, best PVC pipes reducing connection technique in this best picturised Vlog video sharing by you for each & every, your this U tube channel viewers.
This is unnecessarily complicated. Too many joints. All you need is a short length of reducer pipe from the elbow, then heat gun the rubber hose over the reducer and put a zip tie to seal it.
Mas malaki pa ang gastos nyan,buti pa bumili ka na lang ng Connector,dami pa Nakunsumo at Nasayang na Oras jan at Materyales,Pinahirapan ang Sarili,Makatipid lang Kuno 🤣🤮🤣
Wow! Really, this is a very nice & ever useful, best PVC pipes reducing connection technique in this best picturised Vlog video sharing by you for each & every, your this U tube channel viewers.
Wow dami nman dugtong yan aksaya,ako non kinabit ko ung hose sa hose 1 dangkal lang at ininit ko sa gasera yung dulo ng pvc at sinuksok ksa hose at gnon din sa isa pa hose o dihumaba na ung hose ko nakakapag dilig nko ng halaman ,1986 pa yun ngayun ay 77 yrs.old na ako,
Wow! Really, this is a very nice & ever useful, best PVC pipes reducing connection technique in this best picturised Vlog video sharing by you for each & every, your this U tube channel viewers.
this is a very good example of making life harder and complicated, more money, more time, more material waste, more labor more of everything.
This is unnecessarily complicated. Too many joints. All you need is a short length of reducer pipe from the elbow, then heat gun the rubber hose over the reducer and put a zip tie to seal it.
Por supuesto. Of course
😂
You make people confuse....useless idea.
Too much job
Yes you're right
It will be easy to buy a connector :)))))
Right. I guess if you’re a million miles from a hardware store and/or short of cash this would be a reasonable fix, otherwise no.
Very long process. Just buy a connector.
DIY stores or SHOPEE! & whaaLa! you'LL have that hose & PVC connected..WORK SMARTER...ALWAYS!
Daming proseso nilagyan nlng sana ng hoseclip pgkatapos ma xpan yong hose
For this small jobs U need's 1/2 day ???
Just a reducer & 1/2 inches pipe with 3" long is enough within 10 minutes job & it's done $$$.
Dami sahog daig p ang chapchoy
😅
Too much complicated. One can buy a reducer and get away with all such hassles.
Ok Naman piro👍! Complicated po!
Man this would take me 1/2 a day and different size pvc pipes. Just get a garden tap and garden hose connectors.
Masyadong kumplikado to. I'm sure mas may simple na paraan.
anyone can do more easily than you struggling and making it a big job !!
Too complicated， not practical
You come to know various types of tools available in the market. Nice and home made decisions. Good.
This is insane connection.
Best way , just buy right fittings
Very young hands
Right
I don't know much about these things, but it is too complex, jarring on the mind.
I am reminded of a wise saying, ' Remedy is worse than the disease.'
Oh , nice🎉
Bro, napakadami naman ng procedures mo, di ko matamdaan lahat!
Kung ako yan lalagyan ko na lang ng faucet ang tubo galing sa source tapos ung garden hose lagyan ng fittings para makabit sa faucet.
Ganyan gagawin pag pahihirapin mo ang simpleng trabaho..
ginawa tayong tanga sa nag blog nito 😂😂😂
Not practical for DIYers. Just buy connectors.
Very good ustad shaver wali nikal kahan milty hay.
Not satisfied to much extension of pvc pipe🤣😁
very good
Thanks for support my channel
Hjfhfjdhhjyfhhhh
हा शुद्ध मुर्खपणा आहे. बाजारात अनेक स्वस्त कनेक्शन्स उपल्ब्ध आहेत.
I FELL ASLEEP
Just buy quick release and you're done. It's cheap
Sending for support ❤and God bless
vera level bro 👍
Please apply precautions law as u r using saw with out frame
Кулибин бы наверное из могилы поднялся посмотрев эту дурь.
thank you
Salamat ka da sana makabili ka na ng heatgun para hindi msdumi mga gawa mo.
Kerja mudah dibikin ribet
Better than wasting so much money and time u can buy a plastic connector is best.
Maligoy diskarte mo bro.
việc này giống như bạn lấy một chiếc xe lu, máy lu để đi trên trường học.
Too much complicated 🙄
Waist of time copper pipe two jubilee clips god easier buy far lol
This JUNGLEE old methods don't U have any new stuff???
Masyadong madaming proseso layang mo lang ng reducer tapos na.
Punta k lamang sa hardware, buy ka joint's and Coupling kaysa ganyan trabahong matagal at aksaya ng oras😏👍
This is a waste of time and resources.
A waste of time of your viewers too.
Mais fácil comprar um engate rápido por R$ 15,00
Quá dư thừa,mất thời gian!
This is process is too long and complicated..
waste of time too many joints
72 connections in one joint
ഇതു് അല്പം ചിന്തിക്കാൻ കഴിയുന്ന ആർക്കും ചെയ്യാൻ സാധിക്കും
it's amazing
Thanks For Support
Aa simple work ki, entha time, malli aa plastic pieces thechukoni athiki time waste chesukontaa daa??…
This guy had to be geeked out on something because he was stuck on repeat.
#စေတနာအများကြီးပါတဲ့ပညာပေးဗီဒီယိုအတွက်ကျေးဇူးပါ
Ang daming koniksion napakasimpling idogtong🤣🤣🤣
You can't join pe hose pipe and pvc rigid pipe with thf solvent cement 😃
Muy interesante, gracias.
Oh! Very complicated.
Very long process.
And waist of time lol
Supposed I don't hv heater machine
Then what to do?
Than sadly you have to buy a screw on connector set and install it. No leakage and easy to disconnect.
then You will be lucky because you won't waste much money on that useless material 😉
Too complicated and expensive approach, fast and easy with correct connector available on markets.
JUST GET THE RUGHT FITTINGS AND DO IT RIGHT LOL
VERY USEFUL VIDEO!1 THANK YOU FOR SHARE!!
i use screw on connectors...
daming pa eklat
In one viewing I can not remember this lot of joint,I just make my own short idea.
What the hell. How many joints he made for that when you can do it in simple and easy way.
뭐가이리 복잡하지 70년대 수도배관
Which part is the "Host" ??
Méthode : j'avais envi de m'emmerder ... 😂
Too much joint..we make better than this...huuuu
Ok ha ❤
pwd naman ung pipe ang ipasok sa hose bakit ginamitan pa ng long nose na flies 😂😂😂
good idea but not a good solution
Ten times cut you cut pipe to many joints is that necessary???
Daming proseso😅
😵💫😵💫😵💫😵💫😵💫😵💫😵💫🤯🤯🤯🤯
Ngapain harus banyak sekali sambinganx
E eu igual a um Otávio perdendo tempo para ver isso aí vai enganar o ca....
Com certeza vcs tbm estão perdendo seu tempo
Your work is so complicated plenty of joints why not go directly to the point it needs only a reducer.
lol... I use only bicycle inner tube
Just buy a hose adaptor and presto ....you just complicate simple procedure....
Very Best Knowledge , Thanks A Lot
3/4 fta and 3/4 hose nipple it's easy simple install😅😅😅
No good system,
Usless. Can buy a reducer connector from the store.
Before knowing this you are very clever after knowing this you become fool
What was the purpose of this? Just to show people to do something the wrong way? Or is this examples of tweaker plumbing projects?
Wht economy u suggest through this time consuming effort!!!
Just buy a new hose
浪費時間
Mas malaki pa ang gastos nyan,buti pa bumili ka na lang ng Connector,dami pa Nakunsumo at Nasayang na Oras jan at Materyales,Pinahirapan ang Sarili,Makatipid lang Kuno 🤣🤮🤣
This is a waist of time !
Bawkufi Wale kaam itne joint ki kya jarurat hai
Pagal ho gaya vehla banda
Very silly !!!
Time waste so many in out in our not so easy method
this guy has too much times.
Waste and complicated idea. This same item could have been completed with less number of joints. This is complicated and wasting of time.
3rd world style
This is bakwaaaaaaaaaas trick I ever seen ;
I think this fellow never eat food with mouth he everytime eat food firstly with ears or nose or eyes.
Wow! Really, this is a very nice & ever useful, best PVC pipes reducing connection technique in this best picturised Vlog video sharing by you for each & every, your this U tube channel viewers.
He victimized us for views. He should be banned by youtube