A vw specialist advised that we needed a new abs pump costing from £800-£1200. When we followed your video and sure enough a fuse was all we needed. Great video thank you.
Got my partners Polo analysed by Bosch certified technicians, diagnosis: scrap the car because it would cost £600 to fix and probably not worth it. Followed your instructions (with disconnecting the battery), car is good as new. Thank you so much for this video!
damn you might be saving me thousands of dollar. those mechanic just tell me to replace the whole abs unit. but they never diagnose as per what you did. i found defect on my fuse too, will change it tomorrow and see whether can fix it or not. thanks for your video bro!
@@MrTwo9 i try to reset the codes but no luck. my car has hid light install. i read through some complaint that the hid ballast will effect the abs module.
Thanks for sharing It worked on my MK3 Seat Ibiza same 1.2 3 cylinder, was just the fuse all along luckily I didn't have to get anything replaced and pay ££ for free seeing as there was a spare 40 amp in the middle connector
Mi VW POLO BAH 2008, frenos ok. No funciona km, velocímetro y cierre centralizado. Hay un sonido de motor eléctrico pequeño en el ABS q nunca se apaga, lo desconecte xq ese sonido es todo el día. Aquí en LIMA, nadie los vende ni repara. Alguna recomendación ?
I'd be interested to know if there are any physical symptoms that would indicate a fautlly ABS unit. I ask because I have a polo with weird braking issues. The particular issues being an odd 'knocking' felt through the pedal with coupled pedal sinking and loss of brake effectivity when braking over rough/loose ground. The problem appears to be worse in wet weather. There are no noticable issues when braking on smooth road surfaces in wet or dry. Also there are no warning lights to indicate a fault at any time. I know pedal sink is often an indication of worn master cylinder seals and I've replaced the master cylinder to no avail. Any help with this would be well appreciated because it's doing my head in!
Hi, I have a Polo 2006 Model, I have the Handbrake & DSP light staying on + 3 time beeping. Can anyone explain what the problem is, i connect with meter but no any error showing and the breaks oil full and breaks and handbrake fully work. pleases advise.....
Hi. Thanks for sharing this video. I also have a problem with my ABS pump - everything is fine till I drive over 100 km per hour. The speedometer goes completely dead and the ABS and handbrake light comes on. What could be the problem?
Mate you are a genius Thank You So simple and so tricky Please continue making videos I was fighting with that since I bought this car ~1y It goes better without abs but with abs lamp on dashboard it's hard to go through mot
www.ebay.de/itm/263356717776?mkcid=16&mkevt=1&mkrid=707-127634-2357-0&ssspo=EoIMJo3STUe&sssrc=4429486&ssuid=owhtpua_sye&var=&widget_ver=artemis&media=COPY This is a German link. Metal fuse (40A/50A/....)
Subscribed, shared, liked and all the rest. This man helped me out big time…. Thanks for the video and keep em coming This sorted my Audi TT 2.0 TFSi stage 2. 2008/9 58’plate 🎉🎉🎉❤
A vw specialist advised that we needed a new abs pump costing from £800-£1200. When we followed your video and sure enough a fuse was all we needed. Great video thank you.
Got my partners Polo analysed by Bosch certified technicians, diagnosis: scrap the car because it would cost £600 to fix and probably not worth it. Followed your instructions (with disconnecting the battery), car is good as new. Thank you so much for this video!
To say thank you is not enough, my Friend!!! Amazing! You saved me about 150 euros with this video! Thank you!!!
Thanks for video. I already look fuses but didnt see that it was broken. After this video toke Fluke and there it was. Thanks...
followed this and worked first time!! Brilliant
Top man , very good demonstrating and solving problem out 👍🏻👍🏻
damn you might be saving me thousands of dollar. those mechanic just tell me to replace the whole abs unit. but they never diagnose as per what you did. i found defect on my fuse too, will change it tomorrow and see whether can fix it or not. thanks for your video bro!
Let me know if this worked for you aswell 🍻
Did it work James May?
@@MrTwo9 i try to reset the codes but no luck. my car has hid light install. i read through some complaint that the hid ballast will effect the abs module.
Thanks I have the same problem and I believe will be sorted now, please tell me name of that software to diagnose polo Vivo 1.4
I have a 2011 Golf 6 gti and my Abs light is also on but goes off sometimes, what could it be? Please help or give me tips to on what to check
Thanks for sharing It worked on my MK3 Seat Ibiza same 1.2 3 cylinder, was just the fuse all along luckily I didn't have to get anything replaced and pay ££ for free seeing as there was a spare 40 amp in the middle connector
I had a similar problem with the power steering fuse and the service wanted to replace the pump.
Thank you! Great video and thanks for posting. This has worked on our mk3 Seat Ibiza. Fuse replaced and the abs light has gone out.
Mi VW POLO BAH 2008, frenos ok. No funciona km, velocímetro y cierre centralizado. Hay un sonido de motor eléctrico pequeño en el ABS q nunca se apaga, lo desconecte xq ese sonido es todo el día.
Aquí en LIMA, nadie los vende ni repara.
Alguna recomendación ?
Nice job, doesn't look like the fuse failed due to high current, just fracturing from work hardening/vibration
This video saved me £1k! Thank you so much
Thanks for sharing, very helpful!
Great video. Just checked my polo and my fuse is highly likely blown. Gonna switch it soon and see.
hello friend, i have the same problem, what is the fuse code? thanks
Great video! Would this be similar to a 2008 Audi TT? I have the same fault code and my cluster looks like a Christmas tree😅
I'd be interested to know if there are any physical symptoms that would indicate a fautlly ABS unit. I ask because I have a polo with weird braking issues. The particular issues being an odd 'knocking' felt through the pedal with coupled pedal sinking and loss of brake effectivity when braking over rough/loose ground. The problem appears to be worse in wet weather. There are no noticable issues when braking on smooth road surfaces in wet or dry. Also there are no warning lights to indicate a fault at any time.
I know pedal sink is often an indication of worn master cylinder seals and I've replaced the master cylinder to no avail.
Any help with this would be well appreciated because it's doing my head in!
Thanks for uploading this video. It has saved me a few pounds. Happy days,
Hi, I have a Polo 2006 Model, I have the Handbrake & DSP light staying on + 3 time beeping. Can anyone explain what the problem is, i connect with meter but no any error showing and the breaks oil full and breaks and handbrake fully work. pleases advise.....
Same problem too on polo vivo 😭 2013
did u fixed it ?
Hi. Thanks for sharing this video. I also have a problem with my ABS pump - everything is fine till I drive over 100 km per hour. The speedometer goes completely dead and the ABS and handbrake light comes on. What could be the problem?
If you have different size tires(bigger in the back as in the front or other way around) this might be your problem. If not your speed sensor
Check the speed sensors on each wheel (They're independent from the one on the gearbox) You can check their readings on VCDS
Mate you are a genius
Thank You
So simple and so tricky
Please continue making videos
I was fighting with that since I bought this car ~1y
It goes better without abs but with abs lamp on dashboard it's hard to go through mot
Hello friend, where can I buy these parts? What is the name?
www.ebay.de/itm/263356717776?mkcid=16&mkevt=1&mkrid=707-127634-2357-0&ssspo=EoIMJo3STUe&sssrc=4429486&ssuid=owhtpua_sye&var=&widget_ver=artemis&media=COPY
This is a German link. Metal fuse (40A/50A/....)
@@WarpDriveM ty my friend
Thanks bro, was totally helpfull!
I have same problem i change fuse but still have error
My fuse is not burned. I think I am not so lucky as you are. I think my ABS pump is defect :/
learnt something new today thanks man
Very nice, thanks for sharing, I have similar fault with my Polo 1.6, let me check.
Your a champion 🏆
Thank you sooooo much man. This is brilliant
Mate thanks for the info.helpful
good job 👌
Good indeed I will try and fix mine
Solved my problem thank you
thanks it was great help
Danke für die Ideen. Die Sicherungen sind es leider bei mir nicht. Aber nach den Kabeln kann ich noch gucken. Vielleicht finde ich dort den Fehler.
Thank Thank thank you very much it works, and he help me to not lose 600 $💯💯👍👍🙏
Glad that I could help! 😌
Ooo działa 😮😊
Thanks you bro.
Subscribed, shared, liked and all the rest. This man helped me out big time…. Thanks for the video and keep em coming
This sorted my Audi TT 2.0 TFSi stage 2. 2008/9 58’plate 🎉🎉🎉❤
Nice❤
✌✌✌thnks bro
bro, i have no luck over this method...
Not sure to believe that or not but you have to scan the car check if the new fuse blows aswell or is it ok and maybe you just have to reset the code
Super 4euro solved !
You are CRACK! 😁😁😁🤝🤝🤝👏👏👏
No, ballet dancer.
🎉🎉🎉🎉