2012 Audi A7 BCM2 Not Working After Installation
ฝัง
- เผยแพร่เมื่อ 14 ม.ค. 2025
- In this video I show how I attempted to avoid programing with odis, but find out that the original bcm2 was damaged and corrupted. In the end the shop before me did not perform the bcm installation correctly and I was able to get it sorted out via odis
Great video, Thanks for sharing! I don't like blaming other mechanics, for all you know, it had nothing to do with the valve cover. Great job on getting it figured out!
Fantastic! Loving these cloning videos
Glad you like them!
@@DTEAuto sign me for a repair!! I bought an ecu from the junkyard instead of bcm2. Car now powers up but no start. I’m thinking your method is the way to go. Please direct me to help 😢
You are doing great sir .
Keep uploading videos
Thank you for watching
@@DTEAuto it's pleasure to watch your video sir.
@@DTEAuto question for ya, Replaced this exact module on my car due to water damage. Picked up a used one from the exact same car plugged it in and it has to be reprogrammed to the one original from my car. Took my car to the dealer; the dealer said they can’t do it because it’s locked to the original car it came off of? Is that possible? Or is the dealer trying to take advantage of a bigger sale? Thank you in advance
Sadel did it again. Great content always Take care.
thank you for watching as always!
Hi could you let us know if you do manage to sort it out.
I have a similar problem.
Haven't got ODIS.
Thanks
Yes, the issue was that the programing procedure wasn't' completed fully and left have done, hence why it wouldn't "see" the key and so on. Odis was able to go through the regular programing procedure and get it done fully and properly. As far as used ones, I believe there are 2 types of bcm2, depending on years... some are "locked" and can't use second hand ones. But clone work might be able to be done, would just have to try
@@DTEAuto Thanks for that.
Another great video. Thanks for sharing.
Thanks for watching!
Wow! Great information mation. Thank you.
Do you use gecko account with the Odis?
Do you use the "used BCM2"?
I used the new one that was purchased by the previous shop, and the diagnostics/programing was remote in
@@DTEAuto thank you sir
I really appreciate the respond
Perfect diag sadel 👍🏻👍🏻👍🏻.
Thanks for watching
My chip is locked will i have to unlock it through im608? Because it says it will erase all data
I enjoy your channel. Question. Where did you get diagram where to solder at BCM?
it is provided in the autel
What were the fault codes you were getting
yes thank you for sharing your experience !
thank you for watching
Thank you for making this video! I have the exact same issue. Ordered a new BCM and it will need ODIS programming as well. When you scanned the car for codes while it was in SAFE mode, did you get trouble codes from the BCM?
I believe I was able to at least communicate with it
Good job working through the process of elimination, but I have a few questions. Why wouldn’t a new virgin bcm2 crank the vehicle(did the dealer perform adaptation with odis?). Which bcm2 did you use to crank the vehicle?
I believe the dealer didn't get it done properly, and I used the new one that was purchased that the other shop had gotten and tried to get programmed.
@@DTEAuto Thank you
Do you have contact for who remote into your laptop to program the car?
I don't anymore
Hello, please tell me if replace bcm2 and key with other same parts pulled from same care is I will need to replace ECU also or no need, because I already replaced the cluster and gateway but it gives me safe on the cluster, so I don’t know if I still need bcm2 + key and ECU or just bcm2+key
I would assume you would also need the key and bcm2 of matching vehicle you got the other modules from
If I replace key and bcm2 is I need also to replace ECU ?? Because I don’t know if the engine will start with new bcm2 and pulled from different car
What was the noise ? Drive belt related? 👋
I believe so
These units are quite fragile but most of these issues (no ignition, 02181, 0003 dtcs) are software glitches that can be fixed without the ODIS. :)
is autel j2534 vci work with odis？
Yes it worked just fine
@@DTEAuto Interesting~~odis is genuine or clone？
Genuine
It’s too bad that the customer didn’t tell you the whole story behind the failed repair (or whatever fib was told by the Craigslist mechanic).
Спасибо
If a shade tree mechanic jumps into the deep end of the pool. And thinks all cars are the same it’s “just valve cover gaskets how hard could that be”. Think again.
Nice 🫡 did you reprogram the bcm2 from the junkyard w/ that was flashed?
No I did the original new one