STAAD Pro Tutorials - Analysis & Design of a G+4 Commercial Building Part-2 ( Day 46)
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- STAAD Pro Tutorials - Analysis & Design of a G+4 Commercial Building Part-2 ( Day 46)
If you have any problem on STAAD Pro or need any help comment on the video or contact with me via "sandi5793@gmail.com"
Excellent job thanks for sharing
Keep learning ! :)
Dear sir, I have doubts when we will consider seismic load in building & stair case design
How can i help you ?
nice.... great work!!
Keep learning ! :)
Sir how it is showing 6 no. Of bar of 10 mm dia in the beam
It is possible to take 10 mm dia bar
Thank you so much, Sir. Your videos have been really helpful. Sir, I have a confusion actually, why did we not make groups and briefs in this design? When should we design by making groups and briefs?
They will give same result !
ALSO PLEASE SHOW IF YOU WILL APPLY WIND AND SEISMIC LOAD ON THIS STRUCTURES
max longitudinal percentage of beam nd column 2.5 nd 1.5 respt.. that you have given in this structure .. is taken for all structure or it is limitation???
2 & 1.5 !
Its depend on your structure ( load on the structure ) !
for columns at lower floor shows different steel design than columns at higher floors... wat to do
In that case you have to design the structure manually !
HTD, how did you deal with the wind load???
This will help you !
STAAD Pro Tutorials - Wind Load Analysis on RCC Building ( Day 24)
th-cam.com/video/wsCIzEqU0vs/w-d-xo.html
Great Video! Please can I have a file???
absolutely !
AutoCAD and Staad Pro file plese!
at mging09@gmail.com
HOW DO WE KNOW THAT THE BEAMS AND COLUMNS ARE SAFE AND WHY YOU'RE NOT USING THE INTERACTIVE RC DESIGN
You have to check the report !
SIR,CAN YOU SHOW SLAB DESIGN OF YOUR G+4 COMMERCIAL BUILDING
Okay !
Great explanation sir, please do how to design lift for 4 story building and load details.
thanks in advance
This will help you !
STAAD Pro Tutorials - Analysis & Design of RCC Shear Wall ( Day 22)
th-cam.com/video/YKNfjEmN5O4/w-d-xo.html
Sir when we design any R.C.C beam or column or any thing. How to show design steel in STAAD Pro V8i and open this file in Auto cad
when you complete the design double click on any member and you can see the reinforcement !