Steel Structures and Connections in Revit Tutorial

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 207

  • @GierlangBhaktiPutra
    @GierlangBhaktiPutra 4 ปีที่แล้ว +4

    2 years but this video is still relevant. If you are using Revit 2021, Structure and Steel Tab is hidden if you set your discipline into "Architecture" when opening up your Revit for the first time. You can show these tabs by going into File > Options > User Interface. Under "Tools and Analyses" check the tabs you want to show. Then hit OK.

    • @Johan-ly3xz
      @Johan-ly3xz 8 หลายเดือนก่อน

      Thank U

  • @chilombe
    @chilombe 2 ปีที่แล้ว +10

    Might be helpful to say that you should turn on the structural connections options in VG, or else you will not see any connections in 3D views.

  • @ezabala
    @ezabala 6 ปีที่แล้ว +8

    Wow! Great video!! I'm a structural engineer and this is very exciting to me!

  • @JoshAlIen
    @JoshAlIen 3 ปีที่แล้ว +16

    Just FYI - The reason you had an error with the colum/beam connection on the portal frame structure was because the column needs to be rotated 90degrees (column parallel with the beam). The column should always be parallel to the beam so that it works within it's strongest axis.

    • @vodanh34
      @vodanh34 ปีที่แล้ว

      Oh you was right :D Only focus on flow of lession so I did not found that reason.

    • @sheik9956
      @sheik9956 3 หลายเดือนก่อน

      i was wondering what was his reasoning for using the col in weak axis

  • @thierryuwitonze6615
    @thierryuwitonze6615 6 ปีที่แล้ว +2

    Thank you Balkan you are making Revit easy and easier every day.... we owe you big!!!

  • @GrowStronger25
    @GrowStronger25 2 ปีที่แล้ว +4

    “We get these… lil two hooks. It looks, quite cool.” 😂😂

  • @bertveldhuizen8699
    @bertveldhuizen8699 2 ปีที่แล้ว +1

    Thank you Balkan Architect! I'm a General Contractor but I'm starting to dabble in Revit lately, looking to learn so I can slowly get away from the hard physical labor involved in my current job. I'm thinking of getting into Revit Structural and especially steel structures, this steel connections add on is great!

  • @kabijoshi5949
    @kabijoshi5949 10 หลายเดือนก่อน

    Nice video/s. Thanks for mentioning structural stuff. Connections are to be different at corner depending on what fixity level is desired. For and architect, its great.

  • @angadtiwari6257
    @angadtiwari6257 6 ปีที่แล้ว

    I really appreciate Balkan architect, everyone should be like him always learning and adapting to new ways of life. I am seeing that you have actually put in some effort to pronounce beam properly. We should never get stuck on things especially various architects around the world who don't even have an idea about the BIM culture. YOU SIMPLY ROCK BRO!!

  • @griffedediamantclandutonne8165
    @griffedediamantclandutonne8165 4 ปีที่แล้ว +6

    Hi! This tutorial helps a lot to understand how to create connections with steel structures so thank you for this tutorial !! However I have a question about connections: I am working on this subject and I would like to know if it's possible to create connections with wood frameworks. I tried with the same method than the video but it didn't work...

  • @JesusPerez-hx4ws
    @JesusPerez-hx4ws 6 ปีที่แล้ว +1

    REVIT 2019 ITS AMAZING BRO, YOU ARE THE BEST

  • @GuanitaLinda
    @GuanitaLinda 2 ปีที่แล้ว

    AWESOME ! IT IS CLEAR AND CONCRETE

  • @omoyemiokeyinka2959
    @omoyemiokeyinka2959 5 ปีที่แล้ว +2

    Hello Balkan Architect, well done , this video is very useful.just a quick question please, I use Revit 2017. I cannot find the tab - steel on the menu bar for Revit 2017 and I heard from your video saying something about plug -in, I cannot load all the the steel connections, please can throw more light on this please. I look forward to hearing from you.
    Thank you.

    • @drawmepleasemichael959
      @drawmepleasemichael959 5 ปีที่แล้ว

      Omoyemi Okeyinka find revit 2019 or 2020. Comes installed with the connections

  • @HammadKhan-df8uv
    @HammadKhan-df8uv 2 ปีที่แล้ว

    Great as usual 👌

  • @amitkale5631
    @amitkale5631 2 ปีที่แล้ว

    I am unable to split the horizontal beam like you showed at 13:49 . The split tool is not snapping that horizontal beam while if I tried to snap the other two vertical, it is working fine . Does any one have solution?

  • @snoopy70119
    @snoopy70119 5 ปีที่แล้ว

    Another great video! Thanks Balkan Architect!!!

  • @zawlinhtet6596
    @zawlinhtet6596 2 ปีที่แล้ว

    How change the steel plate material. I changed plate of structure material from properties, then export to IFC file and open in solibri. But color didn`t change in solibri. How can I do that?

  • @CaptainJackTaco
    @CaptainJackTaco 4 ปีที่แล้ว

    how do i make tapered steel beam?

  • @kurtcabahug9496
    @kurtcabahug9496 5 ปีที่แล้ว +3

    Hey Sir! can you teach us how to use steel connections with a steel channel cause as I observed, all steel connection were only done for I- Beams or H-Beams only... Thank in advance Sir !...

  • @prince-rc5pv
    @prince-rc5pv 4 ปีที่แล้ว

    i have difficulties with the property help, is not showing , am using the 2020 version can you help?

  • @marosgalaz3764
    @marosgalaz3764 4 ปีที่แล้ว +1

    Pls where can i find that specific column and beam ? I cannot find my rvt families in PC

  • @drawmepleasemichael959
    @drawmepleasemichael959 5 ปีที่แล้ว +1

    Thank you once again. Your tutorials are always good. I learnt something today.

  • @agastyabhat3449
    @agastyabhat3449 6 หลายเดือนก่อน

    The beam system doesn't give beams at boundaries.. Can you please show how are you getting the beams at the boundary?

  • @raphusnet1031
    @raphusnet1031 6 ปีที่แล้ว

    Thanks for this brand new steel tutorial!

  • @jasonbendijo5731
    @jasonbendijo5731 2 ปีที่แล้ว

    This was so helpful!! Thank you

  • @daniyaalmaneveld3779
    @daniyaalmaneveld3779 2 ปีที่แล้ว

    Thanks BA, much appreciated. I am having an issue with loading base plate connections but I found some in a RVT file and not RFA. It seems like I need to copy them in. EDIT: VISIBILITY SETTINGS LOL!

  • @razern420
    @razern420 ปีที่แล้ว

    Can i know the link for steel plugins? those apex haunch and everything

  • @ಮಂಜುನಾಥಹೊಸಳ್ಳಿ
    @ಮಂಜುನಾಥಹೊಸಳ್ಳಿ 2 ปีที่แล้ว

    Super... easy to understand

  • @MohammadAli-ld8qk
    @MohammadAli-ld8qk 3 ปีที่แล้ว

    Hi in ms structure columnn how to make family of structure column with perforations keeping same distance?

  • @chandrasajana2299
    @chandrasajana2299 3 ปีที่แล้ว

    Hi Balkan, do you know with this warning "Invalid type or number of input elements" ??, I've tried using another PC and there is no problem when creating a steel connection, but with my PC that warning always appears, so I can't create any connection. can you help me, please? Thanks

  • @a.61k.1ratnaayuaulia-bptj4
    @a.61k.1ratnaayuaulia-bptj4 2 ปีที่แล้ว

    Hallo, im trying to made conection between rafter steel castellated beam HC 600x200 to column steel WF, but eror. What should i do for fix it?
    Please help 🙏😭

  • @LagannYT
    @LagannYT ปีที่แล้ว

    How to apply connection on steel roof structure? Is it use the same method?

  • @kendelinverarity3478
    @kendelinverarity3478 4 ปีที่แล้ว +4

    When you did your beam system, it appeared to place a beam on the external sketch line. My beam system never places one on the edge. What do I need to have set for this to happen?

    • @luminkyaw7771
      @luminkyaw7771 4 ปีที่แล้ว +2

      Remove Beam System and add manually dragging new beams or use align command to move the beam...

  • @BELAJAR_SIPIL
    @BELAJAR_SIPIL ปีที่แล้ว

    I can't make an automatic connection for castellated beams, what is the best way to solve this problem?

  • @missa7lasamra
    @missa7lasamra 4 ปีที่แล้ว +2

    the steel tap is only in the 2019 version?

  • @nadernader6420
    @nadernader6420 3 ปีที่แล้ว

    dear sir i use Revit 2018. i installed the steel connections already from Autodesk but the connections are not shown, can you help me please how i can fix? thanks

  • @ilyassfrikech1450
    @ilyassfrikech1450 4 ปีที่แล้ว

    Hi Balkan, Great video, i have a little problem i do everything like you did in the video but i can't see the connectons in any view even when i set the detail level to fine.

    • @MalikMuzzammil
      @MalikMuzzammil 4 ปีที่แล้ว +1

      PRESS V AND GO THE STRUCTURAL CONNECTIONS OPTION AND MAKE THEM ALL TICK MARK THEN PRESS OKAY.

    • @roccodangerpowers
      @roccodangerpowers 2 ปีที่แล้ว +1

      @@MalikMuzzammil ty ty ty! couldn't see anything online as to why this was happening to me, your comment was v helpful :)

    • @MalikMuzzammil
      @MalikMuzzammil 2 ปีที่แล้ว

      @@roccodangerpowers welcome welcome

  • @Dgr8Basak
    @Dgr8Basak 2 ปีที่แล้ว

    How to put structural steel connections for non linear elements?

  • @highflyer6454
    @highflyer6454 3 ปีที่แล้ว

    It was so clear to understand. Thanks a lot & Good luck with your career !

  • @shahensha786
    @shahensha786 4 ปีที่แล้ว

    this made my life so easy, thank you so much bro

  • @danemorel9910
    @danemorel9910 3 ปีที่แล้ว

    Hi BA. Ive got a question. I see that once you add a connection of some sort, in realistic view, both beams & columns still are the original colour. for some reason, when i add any connection type to 2 steel members such as a miter to a column & beam, the column changes colour and i cant seem to figure out why. Please help me on this! regards

  • @gnaneswarreddy9551
    @gnaneswarreddy9551 5 ปีที่แล้ว

    great work. i am really happy with this

  • @ahteshamjagirdar
    @ahteshamjagirdar 4 หลายเดือนก่อน

    How to splice connection in top and bottom chords

  • @computeraiddesignstourshow5927
    @computeraiddesignstourshow5927 6 ปีที่แล้ว

    Hi Mr. Nice job. I have problem with revit, why they dont have connection of light gauge steel while its wide area for nowdays

  • @scotthouldieson6384
    @scotthouldieson6384 5 ปีที่แล้ว

    Thank you for the tutorial! Any idea how to attach channel (say C8) to beam (say W10) with a clip angle? Revit gives me a warning "The shapes for medium and fine detail levels of connected element are inconsistent". The beams are shown as connected, but no clip angles are produced.

  • @joedestefano3107
    @joedestefano3107 3 ปีที่แล้ว

    I think your tutorials are very helpful and cant thank you enough but I have a quick question. I am still a student and designed a building without a real structural plan is it possible to add a structure to an existing model

  • @chatylovag
    @chatylovag 4 ปีที่แล้ว

    I m stuctural engineer and I learnt a lot from this vid 😉

  • @5minuterest936
    @5minuterest936 3 ปีที่แล้ว

    Thank you for this tutorials. I learnt something today. i have model as per video. i have not found parameter. how to add parameters

  • @manuelnguindo8489
    @manuelnguindo8489 4 ปีที่แล้ว +1

    Thank you for this tutorial.

  • @markosthemba1599
    @markosthemba1599 5 ปีที่แล้ว

    I love your videos man, your explain nicely.

  • @ostate300
    @ostate300 4 ปีที่แล้ว

    Very good, wish you would do some over welds

  • @ATTRUONGNGOC
    @ATTRUONGNGOC ปีที่แล้ว

    Hi You. Can you make a video showing how to create a new connection between H steel and H beam?

  • @stephanegodito8856
    @stephanegodito8856 6 ปีที่แล้ว

    how did you add the steel tab on panel????

  • @raekell
    @raekell ปีที่แล้ว

    the connection i loaded is grayed out. any idea why??

  • @zefacademy5771
    @zefacademy5771 4 ปีที่แล้ว

    Very helpful. Thanks.

  • @marty3194
    @marty3194 6 ปีที่แล้ว +1

    very nice video's! im starting to learn revit, any good suggestions which of your video's are good to start with?

    • @balkanarchitect
      @balkanarchitect  6 ปีที่แล้ว

      th-cam.com/play/PL1n-0H6b0FkWiumwbogDXiOGwy2_621gx.html
      This might be a good place to start!

    • @marty3194
      @marty3194 6 ปีที่แล้ว

      cool, thx for the quick reply!

  • @kernstorge
    @kernstorge 5 ปีที่แล้ว

    Man, thank you so much! You always help me a lot a looot! Хвала вам!

    • @kernstorge
      @kernstorge 5 ปีที่แล้ว

      @Muh Hajir مهجر I don't know exactly what kinds is good for that, what is most important... But my laptop is an Inspiron 14 5000 of Dell. And the configuration:
      Processor Intel® Core™ i7
      Windows 10, 64 bits
      NVIDIA® MX150 2GB GDDR5 Dedicated Graphics Card
      16GB RAM Memory (1x16GB), DDR4, 2666MHz

    • @kernstorge
      @kernstorge 5 ปีที่แล้ว

      @Muh Hajir مهجر Mine has worked well. But nowadays there are many good computers and laptops on the market. If you can buy those for gamers, I think they are better, they usually have good hardware and good graphics performance. Don't worry about your English, and you don't have to say sorry. When necessary just say that you are learning, that your English is in progress. 😉 No one is born knowing anything, everything is learned. I wish you good luck and have a great day! 😊🤗

  • @travisnguyen1475
    @travisnguyen1475 5 ปีที่แล้ว +1

    Hi Balkan Architect
    , what kind of software did you use to calculate structure load? I mean before you design structure in revit structure and analyze.

  • @erickmutale8039
    @erickmutale8039 ปีที่แล้ว

    Thanks brother! this really helped alot.

  • @marianmudrik2309
    @marianmudrik2309 6 ปีที่แล้ว

    This is what i wanted, thank you very much

  • @aligohar7141
    @aligohar7141 5 ปีที่แล้ว

    Great.. Simple And Deep...

  • @jeeva5211
    @jeeva5211 3 ปีที่แล้ว

    Thanks for sharing knowledge 👌👍

  • @matthewclarke7079
    @matthewclarke7079 6 ปีที่แล้ว

    For when you loaded in the foundation how do you get that whole list of stuff, I don't have that

  • @carlos20111989
    @carlos20111989 4 ปีที่แล้ว

    hi guys, where is possible i download some families of steel structure?
    In my revit i've only 1 bem and 1 column type.

  • @KlavierSynth
    @KlavierSynth 4 ปีที่แล้ว

    Just amazing!! Thank you so much!

  • @juanangeleri8320
    @juanangeleri8320 4 ปีที่แล้ว

    Hello Balkan, how are you? I speak to you from Argentina and I would need you to answer a question for me! What plugging is needed to make structural connections?

  • @beautiful-ic9ji
    @beautiful-ic9ji 3 ปีที่แล้ว

    Sir what is the name of this softwer

  • @Crazy1793
    @Crazy1793 6 ปีที่แล้ว +3

    Hey firstly great tutorial on show how Revit connection works, thank you for showing how it works before I head out and purchase it for myself.
    Secondly, as a structural engineer, it was really funny seeing you place unless connections beams and columns. I could have made drinking game from the amount of times you said "structural engineer"
    Lastly, I really like your little demonstration/showing of Revit 2019 and yes I got existed seeing that I can add joint connections in my models.
    Keep up the good work, cheers

  • @adnanmasood2258
    @adnanmasood2258 6 ปีที่แล้ว

    Hello Sir,
    i want to know that how we will connect tube bar first one position in the Arch and second one position leaner, how can we connect both with plate and nut bolt.
    I have try many time but unfortunate fail every time

  • @LorenzoVecchi
    @LorenzoVecchi 5 ปีที่แล้ว

    Is it possibile to have this add-ins with the education version of Revit?

    • @73p3ro
      @73p3ro 5 ปีที่แล้ว

      Lorenzo si non ti rendi conto che sta lavorando con Revit alla versione studentesca, amico, sei nel posto giusto, ma nel momento sbagliato.

  • @sabdoll9773
    @sabdoll9773 6 ปีที่แล้ว

    Thank you so much balkan . But please can you make us railing for curved custom stairs ? Railing to be solid and fancy . Please please do that .. i din’t know how to make a curved good sweep .. like how can i pick 3D path from a stair ?

  • @lingeshwarans452
    @lingeshwarans452 4 ปีที่แล้ว

    This is very useful tutorial video. Thank you so much and I can't to edit modify parameter. It's hide. Can u please explain

  • @camilaibacache1606
    @camilaibacache1606 5 ปีที่แล้ว

    Nice tutorial , thanks for sharing

  • @عامريسن-ق8د
    @عامريسن-ق8د ปีที่แล้ว

    I'm having a problem with connections as I didn't find them in the first place. Can you help me with the way to download it or find it🤔🤔😭

  • @MykytaLytvynenko
    @MykytaLytvynenko 6 ปีที่แล้ว

    Hey! First of all thanks for all of your tutorials, they've saved a lot of my time! But I have a problem - when I make a connection between steel beams/columns I can't make this connection visible! Revit just write that "The shapes for medium and fine detail levels of connected element are inconsistent". I've already tried to change visibility settings and detail level, but it didn't help! What should I do? Revit 2019.

  • @favaspalat1
    @favaspalat1 4 ปีที่แล้ว

    thank you sir its help me lot of

  • @tbone12211975
    @tbone12211975 4 ปีที่แล้ว

    Dude, thank you so much! I couldn’t figure out how to load the connections. It’s kind of dumb to have a tiny obscure arrow to load important stuff, but maybe that’s just me.

  • @haifaletaif8535
    @haifaletaif8535 6 ปีที่แล้ว

    hello , i don't have the option steel in my revit ! what can i do please ?

    • @jafar5112
      @jafar5112 5 ปีที่แล้ว

      You have to install the add-on / extension. I think (almost sure) that you can get it from Autodesk for free if you are a student =)

  • @idasmith8644
    @idasmith8644 6 ปีที่แล้ว

    Hi Balkan Architect, dobre dan. I have the same problem like Sameer sam, I cannot find the "Steel" tab. I have the Revit 2018 as student version installed and need "Steel". How works this? Thanks,

    • @moegyi2077
      @moegyi2077 6 ปีที่แล้ว

      Find it in addons.

  • @sameersam5814
    @sameersam5814 6 ปีที่แล้ว +1

    I cant find that steel tab !!??.. how can i get that!?

    • @maxgayurov5257
      @maxgayurov5257 6 ปีที่แล้ว

      sameer sam I guess it’s only in revit 2019, in my 2018 there’s no “Steel” tab too😕

    • @sameersam5814
      @sameersam5814 6 ปีที่แล้ว

      @@maxgayurov5257 yea need to update

    • @moegyi2077
      @moegyi2077 6 ปีที่แล้ว

      you need to download that plugin for 2018.

    • @rubenromero6031
      @rubenromero6031 6 ปีที่แล้ว +1

      @@moegyi2077 How can i do that?

    • @moegyi2077
      @moegyi2077 6 ปีที่แล้ว

      @@rubenromero6031 give me your email, i'll send to you.

  • @zackvasiljevic2260
    @zackvasiljevic2260 6 ปีที่แล้ว

    Hey bro, how to all those things in Revit 2018 because i do not have STEEL on my bar? Thanks

    • @bhardwajtablet8197
      @bhardwajtablet8197 6 ปีที่แล้ว +1

      Login to your autodesk account - you will get profile and management tabs on top. Go to management. - click all products and services on left - select Revit (it will show your details. e.g. mine is a student version) - Go to updates and add ons (below left) - you can find 'Revit 2018 Steel connections' (many other add ons available) - click download.....
      If you don't have a licence, find this add on crack online.
      Hope it helps.

    • @bhardwajtablet8197
      @bhardwajtablet8197 6 ปีที่แล้ว +1

      After downloading, restart revit - go to structure tab - connection arrow down - select all 'available connections' and add them to 'loaded connections'

    • @vahsiii
      @vahsiii 4 ปีที่แล้ว

      @@bhardwajtablet8197 I can naot find it on my account. Have you got a setup or give link. Please help. endel83@gmail.com if you want to mail a setup.How you want but i need it.

  • @beautifulrecitationsofquran
    @beautifulrecitationsofquran หลายเดือนก่อน

    Sir kindly make a vidoe on creating cleat of steel connection
    plzzz

  • @shayom94
    @shayom94 6 ปีที่แล้ว

    How can we make a video to assemble the building
    using Revit?

  • @arkplato2186
    @arkplato2186 3 ปีที่แล้ว

    preview showed connection with ttwo plates not be seen here

  • @Re6471
    @Re6471 3 ปีที่แล้ว

    mine says connection failed, Invalid type or number of input elements. tried everything but not work

  • @muhammadturi4387
    @muhammadturi4387 5 ปีที่แล้ว

    sir i have downloaded my revit from autodesk student version but when i look for different types of doors and windows (LOAD FAMILY) it show me empty folder ,, i did reinstall revit again but same problem

  • @sameersam5814
    @sameersam5814 6 ปีที่แล้ว

    I wish to see how can you connect tapered column and beam in steel structure. Can you do it?

  • @stephanchristinefitness3706
    @stephanchristinefitness3706 6 ปีที่แล้ว

    Hi. Can you do a tutorial on how to present the Schedule Openings in a A3 Paper?
    Note , i.e. we have not provide (or model) the exact openings dimension in the layout We want it "freestyle" for presentation.
    Many thanks.

  • @dulguunbatgerel4258
    @dulguunbatgerel4258 6 ปีที่แล้ว +14

    You are the best.. What about Vray 3.6 for revit.. REALLLYY NEEEED THIS TUTORIAL ONLY FROM YOU BALKAN PLEASE!

  • @ashgodrej4113
    @ashgodrej4113 2 ปีที่แล้ว

    I am unable to split beam. Please help

  • @adnanmasood2258
    @adnanmasood2258 6 ปีที่แล้ว

    Sir,
    When i connect the clip angle its showing only one side bolts

  • @GenaEnSamIAm
    @GenaEnSamIAm ปีที่แล้ว

    Great video. Thanks 😊

  • @tito_tito_gorgorito
    @tito_tito_gorgorito 6 ปีที่แล้ว

    Hi, cool videos ;) Can I import the structure from robot with the calculated connections?

  • @whitestarliew
    @whitestarliew 5 ปีที่แล้ว

    Sir I cannot create on grid beam

  • @nhanvohoang8935
    @nhanvohoang8935 6 ปีที่แล้ว

    awesome mate, tks for sharing

  • @axwell1992
    @axwell1992 6 ปีที่แล้ว

    You are amazing, thanks a lot !!

  • @---li7xb
    @---li7xb 5 ปีที่แล้ว +2

    Always great job: It would be usefull a tutorial on cost estimation (BOM) for steel structures pleaseeeee!

  • @beautiful-ic9ji
    @beautiful-ic9ji 3 ปีที่แล้ว

    Any one plz tell me what is the name of this software

  • @skminhajul2
    @skminhajul2 3 ปีที่แล้ว

    Thanks you so much

  • @antebulovic5386
    @antebulovic5386 6 ปีที่แล้ว

    Hey, can you make somekind of material specification of steel elements, and with dimensions?