Preventing Tear-Out While Routing - Plywood & Solid Wood

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ก.ย. 2024

ความคิดเห็น • 90

  • @TrainingHandsAcademy
    @TrainingHandsAcademy  ปีที่แล้ว +1

    *Our beginners handheld routers course is now live! Check out the online course here ---> **bit.ly/3DcIeE3*

  • @eegg6954
    @eegg6954 ปีที่แล้ว

    A very valuable message for new and old woodworkers alike. Nice recap when you don't use plywood every day. Thanks for taking the time to share!

  • @EcksTheGuide
    @EcksTheGuide 2 ปีที่แล้ว

    Thanks for the tips. I was having bad tearing issues with routing a channel in cherry plywood. I was trying to do a deep channel in one pass and it was ruining my surface. So based on your suggestions, I did more shallow channel passes while doing a climb cut. It worked great!

  • @susyqscraftylife2422
    @susyqscraftylife2422 2 ปีที่แล้ว

    You are amazing!!! Ive learned more from you since last night than in the year I’ve been teaching myself how to do woodwork 😮

  • @keelan3894
    @keelan3894 3 ปีที่แล้ว +29

    I work with very expensive veneers. I use the techniques in this video but I like to also lightly dampen the wood and give it a little time to soften the wood. I then set up a straight edge and use a utility knife to lightly score the veneer before running my router bit on it. This has helped me many times with veneers that tend to have, "Micro" tear out as well as the larger damage as seen here.

    • @TrainingHandsAcademy
      @TrainingHandsAcademy  3 ปีที่แล้ว +5

      Fantastic advice Keelan!! Thank you so much for sharing that with us! 👍

    • @roysteiner1005
      @roysteiner1005 2 ปีที่แล้ว +2

      What a clever idea, I am trying to use a diy box joint jig to make plywood drawers and will apply all your ideas to minimise breakout. I particularly like the idea of scribing the wood

  • @GroundedFlyboy737
    @GroundedFlyboy737 ปีที่แล้ว

    This was great! Very well presented and explained, thank you.

  • @MOSTAFA131160
    @MOSTAFA131160 3 ปีที่แล้ว +1

    As usual, very nice informative video. Thank you.

  • @oghozlerona1987
    @oghozlerona1987 3 ปีที่แล้ว +1

    Very informative as always.. keep sharing bro.

  • @marlonhernandez6371
    @marlonhernandez6371 2 ปีที่แล้ว

    So glad I found your channel, God send , thanks for all your info, invaluable,

  • @Roy-l7c
    @Roy-l7c ปีที่แล้ว

    Thanks for the videos. I wonder if you can show how to make a rabbet cut on the inside to inset my stove without having the wide corners like a 1/2” to 1/4” corner

  • @rhranjithkumar34
    @rhranjithkumar34 2 หลายเดือนก่อน

    Great video

  • @e.t.preppin7084
    @e.t.preppin7084 2 ปีที่แล้ว

    I’d love a simple diagram of your shop layout. I’m trying to design a shop for myself to use for the company I work for. Thanks

  • @toastrecon
    @toastrecon 2 ปีที่แล้ว

    Genius! Thank you!

  • @kathrynnewton8721
    @kathrynnewton8721 2 ปีที่แล้ว

    Thank you, just learning
    Wow, just had the flush bit disappear completely from the router! Scary, found it in the garden but never saw a thing!? Obviously not tight enough even thou I used spanner’

  • @David.M.
    @David.M. 3 ปีที่แล้ว

    Thanks for the video.

  • @dranilsaxena
    @dranilsaxena 3 ปีที่แล้ว

    Fantastic explanation

  • @ahmedmosata3844
    @ahmedmosata3844 3 ปีที่แล้ว

    Good explanation, would yoi teach us how to make moldings. Thanks!

  • @stevedockery3534
    @stevedockery3534 ปีที่แล้ว

    Great video my friend. I'm cutting a rectangular hole in 1/2 birch ply. I was told to "score the rectangular hole to be routed" and also go in a clockwise direction. Do you agree? Thanks, Steve in FL

    • @TrainingHandsAcademy
      @TrainingHandsAcademy  ปีที่แล้ว

      Hey Steve! I never score... but it will help with tear-out. Yes, clockwise. If you want to learn more about routers, I do have an online course. You can check it out here. bit.ly/3ytpf4V

  • @pastichedecor3667
    @pastichedecor3667 5 หลายเดือนก่อน

    What kind of bit should I use for plywood? To flush trim

    • @TrainingHandsAcademy
      @TrainingHandsAcademy  5 หลายเดือนก่อน

      The one in this video works great. th-cam.com/video/FZ2Ia0EFYRk/w-d-xo.html

  • @dziwaraga5982
    @dziwaraga5982 2 ปีที่แล้ว

    Cool dude
    😎👍

  • @dougshaw9701
    @dougshaw9701 2 ปีที่แล้ว

    lay plywood flat rotate your router 90 degrees to where the base plate is on the plywood will stop almost all your blowout problems a short back toward you at the end before you complete the route will stop all of that

  • @heavenburnt9055
    @heavenburnt9055 3 ปีที่แล้ว

    I have a question, how do I avoid this by doing notch cuts?

    • @TrainingHandsAcademy
      @TrainingHandsAcademy  3 ปีที่แล้ว

      Hey Jesse! Can you give more details of what you are looking to do? Find me on Instagram if you'd like to send me photos or a video.

    • @heavenburnt9055
      @heavenburnt9055 3 ปีที่แล้ว

      @@TrainingHandsAcademy I am not a very good wood worker, but i am trying to make a couple notch cuts. I think it is called finger notches, but when I put them onto the router. They tend to tear out and look awful. I'm not sure if I'm doing something wrong. I will try to send pictures on IG

  • @mirghulam2764
    @mirghulam2764 2 ปีที่แล้ว

    Where to start router on square piece of wood?

    • @TrainingHandsAcademy
      @TrainingHandsAcademy  2 ปีที่แล้ว

      Fantastic question! I recommend starting on the ends (end grain) first, and then move to the sides (long grain). Always remember to rout in a counterclockwise direction around the outside edges of a piece of wood. If your interested, I do have a beginners hand-held routers course coming out soon. If you want to be notified when it launches check out this link --> bit.ly/2I8vT9k

  • @B.Natesan
    @B.Natesan 3 ปีที่แล้ว

    Hi where you are located I am from INDIA

  • @dwpalme2670
    @dwpalme2670 2 หลายเดือนก่อน

    The only way to avoid tear out on a uv coated plywood sheet is to do a climb cut. Set the feather board as tight as you can get it without damaging it and move the board evenly through the router

  • @bonganigwexe4433
    @bonganigwexe4433 3 ปีที่แล้ว

    How to reduce router noise? That thing can scream.

  • @twokool4skool129
    @twokool4skool129 ปีที่แล้ว +1

    Also, don't use dull cheap bits. There's a massive difference in sharpness, and therefore amount of tearout, between a $4 bit and a $40 bit. I've also found covering the wood surface with painter's tape helps reduce tearout a little.

  • @michaelscott2269
    @michaelscott2269 หลายเดือนก่อน

    I’m an old newbie to woodworking, I’ve used a router before with good results. But yesterday I bought a 2”x2” x 1/4” piece of plywood to make a door. I just wanted to round the edges on all the sides. I started up the router and was pulling it to me and it cut over an inch into the plywood…I could not understand what I did wrong. I was so stinking angry..i used the dame bit that I’ve used before for rounding an edge on many things I’ve made, but thi…I just can figure it out and I don’t want to ruin another $20-25 piece of wood. Thanks…

  • @amodnikam2914
    @amodnikam2914 3 ปีที่แล้ว +2

    Thank you for the very genuine information and guidance. Appreciate your all videos. Only an expert and down to earth person like you can share such a insightful information. God bless you 🎊💐👏👏

  • @KodyKimani
    @KodyKimani 2 ปีที่แล้ว

    I'm thinking I should do the push cuts for now... to be safe. Gill (Just signing off with Gill cause that channel I'm signed into is called something else lol)

  • @luvpostrock69
    @luvpostrock69 11 หลายเดือนก่อน

    I would like to use a router to plunge cut a mortise into veneer plywood. What would be the proper method and can I still use the climb technique to minimize tear out?

    • @TrainingHandsAcademy
      @TrainingHandsAcademy  11 หลายเดือนก่อน

      Check this video out. th-cam.com/video/Im-Gv_bQ4AM/w-d-xo.html

  • @tgnwoodworking9599
    @tgnwoodworking9599 3 ปีที่แล้ว +1

    Thank you for the tip.

  • @brianfoley4328
    @brianfoley4328 ปีที่แล้ว

    Thanks, good information....I'm relatively new to wood working...this is very helpful.

  • @benoitinthewild
    @benoitinthewild ปีที่แล้ว

    Ano way to prevent tears in plywood - especially exp ones - is to use a utility knife and a straight edge to "mark" (shallow cut) the cut line first.

  • @EscobarStyle
    @EscobarStyle 3 ปีที่แล้ว

    Great video as always and awesome tips. 🤜🏼🤛🏼

  • @hoss2200
    @hoss2200 3 ปีที่แล้ว

    Great video. Thanks for all you do

  • @buddylove3540
    @buddylove3540 ปีที่แล้ว

    what about how to avoid tear out making box joints?

  • @KLNYC
    @KLNYC ปีที่แล้ว

    i just started, yah i trouble tearing out on the corner lol

    • @TrainingHandsAcademy
      @TrainingHandsAcademy  ปีที่แล้ว

      If you like my style of teaching you might also really like my new beginner online router course. Check it out here if you want. bit.ly/3DcIeE3

  • @essentialhandyman
    @essentialhandyman 3 ปีที่แล้ว

    Great video. Thanks for posting.

  • @JM-qy5yd
    @JM-qy5yd 3 ปีที่แล้ว

    Excellent video!

  • @anthonypaynter828
    @anthonypaynter828 2 ปีที่แล้ว

    Thanks for the tips. I have been struggling with tearout on some plywood & tried everything from painter's tape to swearing & cursing! Neither worked, but now I can try the Climb Cut after watching your video. Who knew you couldcut that way? Only your video has shown me how to do it, so thank you. It was very timely for my project.

  • @jstpsgthru
    @jstpsgthru 3 ปีที่แล้ว

    Happy Easter. Thanks for the video. I just read your reply that you are in Nvl. I'm in M'boro. Wood shop seemed like too much work in HS, but I would like to learn now. Do you happen to give classes, or know any adult classes in Mid-TN?

    • @TrainingHandsAcademy
      @TrainingHandsAcademy  3 ปีที่แล้ว +1

      Happy Easter!! Yes, I'll have online classes coming soon. The only local place I know of to take physical classes is at the Woodcraft store in Franklin.

  • @muzikman2008
    @muzikman2008 7 หลายเดือนก่อน

    Great advice.. Thanks 😎👍

  • @PapaJoeWalsh
    @PapaJoeWalsh ปีที่แล้ว

    Hi. Great video as always - I'v elearnt a lot! One thing I am struggling with is getting around corners when, say making a rabbit on a lid or a base for a box. My bit invariably takes off the corner rather than cutting straight. I'm thinking I may need to use a sacrificial piece to prevent this; or is my technique rubbish? I know it's been a while since this vid was posted, but I would appreciate any assistance.

    • @TrainingHandsAcademy
      @TrainingHandsAcademy  ปีที่แล้ว

      Could be technique... but using a sacrificial piece is a great idea. I do have a routers course that walks through so much about router technique... there might be something in there that helps. Practice on some scrap wood and adjust a few things... maybe direction of feed, maybe the amount you take off, maybe router bit speed? Try and few things and let me know what works. Here is the course if you want to check it out. bit.ly/3DcIeE3

  • @keithkuckler2551
    @keithkuckler2551 2 ปีที่แล้ว

    Using the router on the flat surface is not the way to go with plywood, or any veneer. You want to rout from the edge instead. And, with solid wood, you can sometimes use the grain of the wood to your advantage, if you lay out the work in the right way, you can rout going with the grain, rather than against it, this will eliminate most tearout. But, of course we all do the climb cuts in the way that is shown.

  • @Supra_Na96
    @Supra_Na96 3 ปีที่แล้ว

    Is there a router type that you recommend for someone who is a beginner to get comfortable with routing? ie plunge vs fixed? Is one easier to learn maneuvering around the stock with?

    • @TrainingHandsAcademy
      @TrainingHandsAcademy  3 ปีที่แล้ว

      Hey there! I started with a smaller fixed based router like this one. amzn.to/3geJaw0 Smaller routers (fixed or plunge) in my opinion are easier to start with... less weight is less intimidating. Hope that helps.

  • @IPASAustralia
    @IPASAustralia 2 ปีที่แล้ว

    Well explained! Your tip will help me immensely. Thanks for posting.

    • @TrainingHandsAcademy
      @TrainingHandsAcademy  2 ปีที่แล้ว

      Thank you for watching and commenting. :)

    • @IPASAustralia
      @IPASAustralia 2 ปีที่แล้ว

      @@TrainingHandsAcademy You're very welcome.

  • @jiananli9507
    @jiananli9507 3 ปีที่แล้ว

    finally, I find this solution for trimming plywood edge after so many search. going to try tomorrow.

  • @JustinPaul1st
    @JustinPaul1st 3 ปีที่แล้ว

    Got myself a pencil router...gonna practice these techniques before I go to a full size router...thanks for tutorial 👍👍👍

  • @eddiel1538
    @eddiel1538 2 ปีที่แล้ว

    Great video, very helpful, thanks so much 🇦🇺

  • @charleskrause6358
    @charleskrause6358 3 ปีที่แล้ว

    How do you prevent tear out on a the end of a curved piece of black walnut?

  • @hemligagosta6554
    @hemligagosta6554 3 ปีที่แล้ว

    climb cut is what is used in the cnc milling, so why wouldn't it be possible in wood working?

    • @kauerpc
      @kauerpc 3 ปีที่แล้ว

      It is possible, just not recommended in most cases. Metal is metal and wood is wood, this is the reason.

    • @JustinPaul1st
      @JustinPaul1st 3 ปีที่แล้ว

      Metal and wood have difference reaction to cutting forces that is why in my 2c opinion 😁😁😁

    • @paschalhammond
      @paschalhammond 2 ปีที่แล้ว +1

      With CNC milling everything is locked down. Using a router the concern is having the router pull away from you.

  • @First.Last.99
    @First.Last.99 ปีที่แล้ว

    30 second video made in 6.20 seconds