Adding a ROUNDOVER to Plywood Corners - Corner EDGEBANDING with splines
ฝัง
- เผยแพร่เมื่อ 26 มิ.ย. 2024
- I'm in the middle of a project where I am using walnut plywood... I changed the design and I wanted to add a big 5/8" roundover to all the corners, so I had to come up with a plan to hide the exposed ply! Let me know if you think I succeeded!
Huge thank you to WOODCRAFT for sponsoring me and my channel. I love all my Woodriver planes and chisels, you can find them here -
For more details, check out my website - www.3x3custom.com
____
WOODCRAFT LINKS
5/8" Roundover Bit:
bit.ly/HugeRoundoverBit
Chamfer Bit:
bit.ly/ChamferBit
Slot Cutting Bit (this is the perfect size for biscuits as well):
bit.ly/SlotCuttingBit
Low Angle Block Plane (AKA My New Favorite Toy):
bit.ly/LowAngleBlockPlane
Rabbeting Bit:
bit.ly/RabbetingBitSet
1/4" Roundover Bit
bit.ly/SmallRoundoverBit
AMAZON (affiliate) LINKS
Incra Push Block:
amzn.to/3luZA2V
____
My Amazon Store - amzn.to/2uRpplb
_____
My Recording Equipment
Camera:
amzn.to/2scO0mu
Shotgun Mic:
amzn.to/2rp1ETp
Lav Mic:
amzn.to/34r7Ico
Voiceover Mic:
amzn.to/2rs9TOx
___
FOLLOW
Website - www.3x3custom.com
Subscribe - / @3x3customtamar
Instagram - / 3x3custom
Facebook - / 3by3custom
_____
Links above are affiliate links, I make a small commission if you click on them at no extra cost to you. clicking on them really helps me continue to make more projects :) - แนวปฏิบัติและการใช้ชีวิต
I can't express how much I love your explanations and the measure twice, 'make a test one', then cut approach is just so great!
Glad to hear!
It's a really nice piece and I like that you address a common issue that comes up in many carpentry projects: namely that things change. If I could point out two small things: the issue of your one corner piece not being consistently proud along the full length of your top board is most-likely due to your spline being slightly too thin and allowing the corner piece to drift back in the gluing process. (I know you did that on purpose for more glue area but you could probably dial it back a bit.) The other thing I might suggest is that you should clean up all the excess glue with a damp rag right after you clamp! You'll have FAR less sanding before you go to finish and that means less chance of sanding through your veneer, which was one of your concerns going into your decisions before the glue up. Looks like the final piece came out very nice!
I agree on a wipe down before it dries. Naturally I like learning things the hard way but learn that one I have lol.
Great work Tamar, I totally agree you made the right choice with the darker timber for the corner infill, I love the way you explain in detail how you do certain techniques. 👍😀
Exactly the approach I was looking for to hide the plywood ends.
I’ve been keeping the concept of a pair of nightstands on the back burner for quite a while. I couldn’t come up with corner joinery I was happy with. 🤔
Thanks to you, I now have it! Great video! Love your clear and concise explanations and your ‘human’ candidness re mistakes! Thank you!
oooo yeah that would be such a beautiful application of rounded edges!
Love how you added that piece at end so you wouldn't get blowover at the end with the router. People should practice that . I learned the hard way. Man I need to make more videos . I shoot out about 2 to 3 projects a week but never video them or get paid. Usualy for family and friends and ofcourse I donate stuff for worthy causes and charities .
Glad you liked it! And if you started filming them you would drop production down to one every 3 weeks..... filming my projects triples the amount of time I work on them
@@3x3CustomTamar I honestly thought making videos would add more than 3x the amount of time. I would think it totally breaks your flow
Congratulations.
@@3x3CustomTamar i kind of stopped because of all the trolls. Hard enought to deal with stuff happening in my life than to read real bad negative stuff. I do have them made just need to finalize and ill post
@@FranksDIY I never let the trolls get to me. I know if someone is taking time out of their life to put negativity into the world there is something wrong with them….
You not only succeeded, you knocked it out of the park. Beautiful work, Beautiful Lady,and very smart the way you think things through. You are a pleasure to watch.
Thank you for sharing. As a fellow appreciator of the small details, I can tell you that while it seems small, the little details make all the difference.
I sincerely appreciate you letting us learn techniques like this alongside you. This was a really cool way to solve your problem that really adds to the look of the piece. Keep up the great work!
Glad you like it!
T
Love watching you design and problem solve!🥰
Awesome to hear because I like doing it. Ha
I love how you breakdown all the steps and share your thinking. Best of all, there are no 'tricking edits (that I can see) to hide (tiny) mistakes. It motivates me to accept my (big) mistakes.
Glad you like it!
Incredible attention to detail and how you think ahead. Wonderful training and thank you so much for sharing your ideas and thoughts as you move through this - it is so valuable!
Beautiful work! I've never seen an inner & outer round over applied that way before. Very creative. 👍
Thanks! Glad you liked it!
Your work is great! Even your test pieces look amazing. I was thinking you might have turned them into something else but then you stomped on them 😲 Its always a good idea to test new ideas for strength so in future projects you get a sixth sense as to what will be the best type/style of joint you can use. Thanks for sharing your work. I always feel like I have learnt alot, even if I haven't done anything. Looking forward to your next project!
So awesome to hear. Haha yeah. I had to stomp on them 😂😂😂
I like your attention to details, and the fact that you're not afraid to show any mistakes either. Nice, down-to-earth video!
"But, we're here now" Just brilliant.
Maravilhoso, adoro seus trabalhos muito bom para nós leigos, cada dia aprendo mais, vc faz tudo parecer tão fácil e prático, um abraço Almir aqui de São Paulo Brasil.
Wow, that's a super nice looking edge! I might give that a try on one of my next projects.
Thanks! It was fun to figure out!
I just absolutely enjoy seeing your process. You show your process of deciding and problem solving and I like it. I'm learning!!
Yes, I have been woodworking (hobbyist) for 40 years and I love watching your videos. Not sure when I learn something new or if some of it I knew but forgot about. Point is I really love your videos.
So awesome to hear. Thanks!
Despite fractious, imperial units - yeah, went there - surprisingly easy to follow your process! Thanks so much!
Ha. Thanks
When I glue boards together I take a damp paper towel and wipe off the excess glue, makes clean up easier once the clamps come off
BTW love the channel.
I'm late to your channel and have been enjoying all the content you have been providing.
This video in particular is going to save me buckets of tears for an upcoming project I'm working on.
It's a great idea and it looks fantastic too.
Thank you!
You are a great teacher and I really cannot believe with very rudimentary equipment you do such a great job. Many in their videos assume that we have hundreds of thousands of dollars like them equipment. Thanks
I appreciate that you show the process and the mistakes too!
Glad to hear!
@@3x3CustomTamar ⁹
I have to jump in on this comment too, woodworking is all about learning and getting comfortable with new techniques and expanding your repertoire for design sake. You genuinely capture this spirit in every video with your skill and your journeys. I always learn something new.
Jeff Nakama really so awesome to hear. This whole journey has been so amazing to document and I’m so happy you guys are along for the ride
Agreed! That’s me at the end of your video, dropping things and getting glue everywhere! Thank you!😀
Sensacional! Parabéns pelo seu talento, gostaria de ser seu aluno! Kkk
I love how you try new things. And are always learning!
You are such a wonderful teacher! I'm also very glad to see more women bringing their talents to woodworking. Keep up the good work!
Thanks! ✌️
That little lip the round over bit left is called a fillet
“My kids aren’t going to be able to mess up this project.” -- oh how many times have I said that. I got a 5 and 7 year old. I made a beautiful cedar mud kitchen for them for this summer -- CNC engraved with their names -- I hope it can make it through another summer -- I no longer say that something is child proof. It's child resistant. That's best we can hope for. It's like cell phones with a waterproof rating, it's just a matter of time and pressure.
Hahaha! That is the truth....
Not meaning to rain on your parade or anything but your kids and their destructive abilities are known because you're raising them. Wait until your grandkids visit! With them, you've not had a hand in raising them nor could you possibly imagine their abilities to break the unbreakable. Still wouldn't have it any other way and love when they come to visit :)
Gene LeGate 😂😂
@@genelegate1308 at 5 and 7 I got a ways to go before grandkids. My kids love it when my mom comes to visit, and yes she is constantly impressed when I tell her why I had to fix something because my kids broke it, and always tells me, you and your sister never did that...
@@genelegate1308 You are correct, Gene. The difference for me is that I don't get as angry when my grandkids break something as I did when my kids broke things. That being said, I do prefer to go to my grandkids' house rather than have them come to mine. I wonder why?
I love this idea Tamara. I will totally use this round over and filler piece when I use 3/4” or 1/2” or whatever thickness of ply wood all thanks to your informative video!😊👍Thank you so much!👏👏👏👏😊👍
As ever, love your work. I think others have said something similar, but I really appreciate you sharing what you tried along the way that didn’t work. It enriches your content immeasurably.
So awesome to hear! There’s a lot that goes into all these builds that hard to fit into a 15 minute video. So I’m glad you guys appreciate the super focused videos
no no - use hardwood for your splines. and keep them to a press fit so all alignment is spot on - cut grooves slightly deeper than width of spline to allow for relief when gluing and clamping. when i was making tables i would use spline joints for the tops to increase the glued surface area, but nice and tight with relief in grooves. i also used an expanding urethane glue to fill the gaps. awesome work though. keep the projects rolling...
She explained your points in the video. That is why i look at the whole video.
@@beqwaam keep on watching there buddy. you are doing fine.
I wish I had hair.. I wouldn't keep on loosing my bloody pencil. Great work!
😂😂😂 and get sometimes I still can’t find it
It's great that you show your thought/test process. I think you made the right choice with the Walnut hardwood and the project is going to look awesome.
Glad you like it! Looking forward to finishing it up!
Thank you very much for doing extra parts, iterations, and testing! I especially like that you are human, and laugh at your mistakes. Yes, I do know you would have protected the plywood against tearout (sp?) on a non-test piece.
Thank you for including the testing as well!
Glad you like it! I have a lot of fun doing these experiments!
“My kids aren’t going to be able to mess up this project.”
::cracks fingers::
“Challenge accepted”
😂😂😂😂
Brian P ... obviously kids aren't teen-agers, then.
It's when said teen-agers decide "your" tools are "family" tools ... you can guess the rest ...
Grr saw this after i made my comment. You beat me by 30 minutes.
That's exactly what went through my head when she said that and I scrolled down here to type it up and wouldn't ya know it, this was the very top comment!
In UK, "Game on."
I am a big fan. What can and old guy ask for when watching woodworking video's. Your cute, funny, pleasant, and a good woodworker. Total package. Keep up the good work!
Great video, I really appreciate that you took some time to solve the mystery of curved corners on a plywood cabinet, thank you very much.
So glad you liked it!
Hi, first of all best greetings from Germany. I came to the woodworking thanks to my daughter (doll bed etc) and then I saw your videos. I love the way you show us how to troubleshoot and explain why this happened or what could be changed. Just that you always make new connections, it's just amazing. I have few machines and have to do a lot by hand. But you often show 2 or 3 ways how to do it when you don't have the machines. Please stay like this and keep doing it. And please stay healthy
So awesome to hear! I hope to keep doing it! Ha
Very clever. Which, is the hallmark of your work. I spent quite a while having fun thinking about the different woods that would make different statements in the corners. I agree with your thought of insuring that no one takes it as a failed attempt to create a seamless transition. Entertaining and informative.
Glad you liked it!
Thanks for the lesson. Love how you point out your slight oversights and find a solution. Take care
Glad you liked it! Thanks!
Thanks for this. I’m new to woodworking and trying to learn all I can to get the best results. Videos like this are exactly the type of thing I love! It will make me better when I get to the point of making this type of furniture. You are awesome!
Glad it was helpful! Awesome
Great video. I really like how clearly you explain your thought process and how you don't hide any mistakes. Really helpful, thanks.
Awesome to hear. Thanks!
I love your projects and your natural way of showing the things that happens in real life.
So awesome to hear!
Well this idea I can use, thank you! I have a stack of birch plywood and assorted hardwoods waiting to be made into furniture and I will definitely be looking closely at variations on this technique. I'll try test pieces with variations on the size of the round-over and using contrasting woods for the edge-joining pieces. Thank you again for the inspiration!
So awesome! Have fun!!
This is awesome! I appreciate the durability test as well. I learn so much more from seeing what goes as planned and what doesn’t. Always turns out amazing in the end!
Happy I tested them out as well!
I really like your "build" videos but I like these videos as well. Thanks for taking the time to show us your different methods and how they worked. Thanks for taking to time to doing this. Really appreciated it.
So glad to hear that it’s appreciated!
Great video. Great that you explain not only the woodworking processes but the way you’re thinking out the options.
So glad you liked it!
Another awesome video! I love how much detail you put in your videos in the actual process of your woodworking. I learn so many little tricks that help me fix major issues I have in my own projects that I never would have thought of!
That’s so awesome to hear! There are so many details that get glossed over in the full build videos. So it’s nice to just focus on one aspect of the build and try to explain as much as I can. Glad you like it!
I love your tutorial videos, sis.
It's kinda easy to adapt all your ideas for new woodworking guys like me. Thanks a lot all your infos n guides. I really appreciate it.
This feels more about a really nice way of joining plywood at 90° than it does about the roundover. This is a really nice elegant way of joining and hiding the ply, and very strong to boot. Nice one!
Glad you like it!
Wow. What a beautiful and functional way to strengthen those mitered corners. Amazing. I love the experiment with the filler piece as well and will be trying both methods in my projects. Thank you for the video!!!
Awesome! Glad you liked it!
As a new person to woodworking I enjoy everything you put out for us to learn and grow!! Fabulous Job!!
Awesome to hear!
I’m so happy that I found you! I’ve been watching your videos for a while now and I’ve learned a lot. So, thanks. This video is perfect for me right now because I can’t seem to get a perfect 90 degree miter joint for my plywood. It doesn’t take much of a slip and the 45 degree cut is wasted. Especially if you’re trying to make something perfect. I’m making a couple of night stands for a customer. I’m an auto technician and trying to get the heck out of this business. My customer saw some other furniture pieces that I made for myself and asked if I could build the night stands for her. I told her that I would and now I’m committed. The only problem I was having was the miter cuts because I couldn’t get them perfect in order to sell them to her. I tried this type of joinery that you did in this video on some practice pieces and they turned out great. I’ll be redoing the carcasses this week with this type of joint. I think I’ll do another couple of practice pieces with different shades of wood because it’ll be obvious that there’s two pieces of wood and it won’t flow. So why not enhance it, eh?
Thank you very much for the guidance!
M
So awesome! Glad you were able to get something out of the video!
Love the way you show the different ways to approach a woodworking problem. Thank you.
So glad you like it!
Great technique. The end product looks like a cool joinery feature, and not at all like you are covering plywood ends! That is a real trick when using plywood, and very effective here. So well done!
You are a skilled technician and a good teacher . I am a luthier but like to almost make anything. I like your practical intelligent approach and honest presentation. I feel like I learn from you but WITH you too.
That’s so awesome to hear! Thanks!
Good job walking us through your thought process. Looking forward to seeing the project video.
Glad you liked it! I’m excited to finish it up. Ha
Good work and planning Tamar, not many professionals would even have thought that through as you did with the chamfer. Keep on smiling.
Thanks! Glad you liked it!
I don't even build stuff with wood, I just have bass guitars which are basically made of wood, but your videos are so entertaining and very explicative, as someone mentionned, it's cool that you show your mistakes too. The constent smile and positivity are added bonuses!
Glad you like them anyway! Ha!
I am following you some years by now, and see you growing better and better. I think you reached the pinacle. You're now officially a master woodworker. Greets from the Netherlands.
Thanks ☺️ but there is always more to learn ☺️
Tamar, great video, as always. And so nice that you show your design process and the alternatives you have considered before making the final choice on design. Can't wait to see the next video and the final result!
So glad you liked it! There’s def a lot more that goes on than what’s in the final build video. So it’s nice to make these detailed videos on one portion of the build
Every mans dream. Excellent job!
Love your idea! The roundover really adds to the overall look of the project. Makes it very unique. As always, great video and instructions. Looking forward to seeing the project when finished!
Thanks so much! I excited to actually finish it. Ha
love your thinking process, how you spotted the problem, found an elegant solution and executed it well
Glad to hear! I have a lot of fun figuring this all out ☺️
you're so smart and thoughtful about building. love the prototyping
It’s always fun to figure this stuff out
Excellent workmanship craftsmanship Thank your for your helpful lessons your a credit to the world of woodworking
great idea and wise to leave it proud for inconsistencies, Thanks for the idea!!!
Awesome process, and the finished result is terrific.
Your attention to detail is 👌
Thank a mil.
Glad you liked it. Thanks!
the project is super cool. Your enthusiasm is contagious!
Thanks! ☺️☺️
Wow! Perfect solution...!
I am now also experimenting with plywood, and have not thought about such a solution as you suggest.
Thank you very much for this video.
I always look at your projects with pleasure.
Take care of yourself and good luck.
So glad you liked it!
I just found your channel, and this is me finding my candy land. Love the channel, feeling inspired to at least attempting one easiest woodworking project seeing you solve this problem. Hopefully one day I am not limited by fear, poor knowledge or space constraints
Awesome to hear!
Oh wow , your video could not have been shown at a better time , been working on a project and thinking of a different type of miter corner and your spline idea with contrasting wood is exactly the great idea I have been looking for . I will send you a photo of the finished project if you like . Thanks again Tamar .
Awesome. Love it when that happens
Agree! Looks very cool. Yet another way to finish plywood edges/corners
So glad you like it!
Couple of extra steps really adds to the longevity makimg the extra effort worth it!!
For sure!
Tamar you are a straight up bad ass. So inspirational without any bs. I learn something useful from every video you publish.
So awesome to hear! Thanks! 🤘🤘
I used this method to save a display cabinet build couple of days ago - great technique! 👍🏿👍🏿
Absolutely brilliant. Good work. 👍
I really do like/prefer that look very much. Thanks for showing the how to and a number of variations to have bouncing around in my head... As always, well done! Thanks for sharing...
So glad you liked it. Thanks!
Great job! Thanks for showing and explaining how and why you did it.
Thanks! Glad you liked it!
You just changed my life! I've been internally wrestling with how to make an enclosure for a power supply for a turntable I'm building. Now I know. Thank you.
Awesome. Glad you liked it!
Tamor, I have seen your project addition of roundover to plywood looking very fabulous very decent, you are really very genius and very skilled.
Thanks!
Just what I needed to see before embarking on a cabinet project. Thank you
Awesome
That's a nice way to create a strong, modernist flavoured joint. I have a sweet sounding pair of bookshelf speakers that have the most awful cabinets. (80's walnut-ish contact vinyl over chipboard.) I've been going to rebuild them for about a decade and I think that you've just shown me the genesis of what they will become.
Thanks again Tamar!
Awesome!!
I absolutely love the result. Really enjoy watching your experiments... I get so excited when it works out brilliantly 😁👍🏻
Haha! Thanks so much! Me too 😂😂
Great video - very helpful. I have looked at that walnut plywood and it is really expensive so I appreciate that you didn’t want to just start over. I think you have a great solution and can’t wait to see the finished project video. Thank you!
Yeah... sticker shock on this stuff was not fun. Ha. Excited to finish it up!
Not sure how I landed here but happy I did. I have a boat project that requires round edges in teak stain grade furniture. I have been wondering how to do this and this is the idea I imagined (hardwood corners with plywood panels). I hadn't yet worked out the details. Now I know how to actually DO it. Thanks for the tutorial!
So awesome to hear! Glad you found it useful!
One of things I like about her channel is the fact that she works much like woodworking hobbyists, that is she set up her machines by trial and error on scrap.😀😃😁
marvelous work as ALWAYS
I really like your videos. I think you are really natural on camera and a joy to watch! Love the rounded corners swell. :)
I am utterly loving your skill progression. and learning at the same time by watching your videos!
This is a really nifty technique that I am going to use in the near future.
Bravo.
Awesome to hear! Thanks!
I learn something every time I watch and i have been at this lifestyle 45 years hands on !;-)
So awesome to hear
An excellent demonstration of this technique. Thanks for sharing, Tamar!
Felix
So glad you liked it! Thanks!
Oh my.... I can't wait to see the project video for this build. You are an amazing wood worker.
Thanks! I can’t wait to finish it. Ha!
@@3x3CustomTamar Im about to start building furniture for the living room in our new house. The living room set will be an industrial type with an I have no idea what I'm doing look. Going to be steel frame and wood top tables basically. Thinking about making some videos.
It that sort of detail that turns a good piece into a brilliant piece. The result looks fantastic.
Thanks!
Great ideas here! The sacrificial piece you temporarily attached when rounding over your corner was another great idea.
Thanks so much! Glad you liked it!
Thanks. Some wood workers are pure artist, like Matt Este. Others are pure business, like Peter Mallard. Matt buys wood, that I could never afford to even look at. Peter uses MDF, but that guy pays his rent in London. I'm not either of those guys. I love using plywood. I can afford it, and if it doesn't get wet, it last forever. Besides, if I used it right, it looks great.
👍👍
Very creative, Tamar. I love the finished look. I look forward to seeing the finished project.
Thanks so much! Excited to actually finish it. Ha!
Looks amazing 👍 I feel better knowing that I'm not the only one who changes things mid project. Love your videos and thanks for the great ideas.
Thanks! That’s how all projects go. Ha