You kick ass at explaining the work ur doing and what's deen done off screen. Do some paid work videos its filler for more views and it should boost your algorithm just my two cents 👍👍from this guy
Back halfing started out so you could fit huge wheels and tires under the car then all the suspension stuff was developed for racing. You have a great garage.
This content is SO MUCH BETTER than your Honda build! Diesel trucks is what you know and it really shows with your build! I also had know idea how good your fab skills are until the K10 build. Keep it up Wyatt this truck is going to be a beast and it will be very cool to see you beat up on some turbo Honda's.
Very nice to see a fellow Diesel Tech with a nice neat clean shop. Back in 2000 when i went to school every Friday was shop cleaning day. Although I was already a neat freak it drove me crazy but it's nice to see that you keep your shop clean.
I've seen Hondas totally destroy v8s there are Honda 4 bangers with over 1000 hp and half the weight who do you think would win that race yeah the honda
@@carlobrigante881 Carlo Brigante derrrp. Never said a Honda engine or a 4cyl, 6cy heck i5's? couldn't make power.... But no replacement for displacement... All I'm saying is, in some cases V8 setup would be cheaper & more power? It's simple.
@@TH-camforcedmetochangemyname why would I spend 5k on a Honda and gave to build the engine to make 700 wheel when I can buy an sc300, a 2jzge can hold 700wheel stock internals
I like your slow and steady approach to your project rushing things just puts undue stress and ultimately causes mistakes. Do it once and do it right or do it wrong and do it twice. Keep up the good work at your pace and get some food, I'm sure your hungry..👍
I’m not going to lie I hate everything about diesels but afteri have been watching your post since your channel started now your on this truck I’m growing on them good work man I’m out in Oregon coming to Colorado this summer with my Fiancé and were getting married out there somwere haven’t found a place yet but would love to see this beast in person
Dude I just found your channel today because I was looking how people do a tube rear and getting ideas. You gained a subscriber you have a nice channel going man! Keep it up!
I really enjoy watching you work on your race truck I'm building one too and I was looking for ideas and how to's and watching you cleared up a lot of my questions thanks for the content I really do enjoy it I hope everything goes great for you God bless you
Not sure why I wasn’t subscribed till now. Awesome little tutorial. I’m building a ‘54 Fargo short box stepside this year. Wasn’t sure which way to go with suspension.... but I think I’m going to go a similar route in the rear now. Leafs up front. Probably going gasser style. Looking forward to the next instalment in this series.
Really great chassis tutorial, and a ton of useful information. You and Hayden are doing some great fabrication videos. Glad to see someone who takes pride in their work. You have a subscriber
I have to say 2 things: your videos are super well explained and very interresting. And props for having a shop 1000 times cleaner than your friends 👌💪. Props! I hope you'll keep posting often! :)
Real nice work fella... I love watchin this stuff haven't watched tv in I don't know how many years, and due to the efforts like yours, Hayden, pfi, B-boys Cleetus etc. I don't fucken miss it one bit.
You know I like the fact that you don't hold your tongue when it comes to cursing lol I never realized how much it bugged me with all the different car channels that don't swear until watching all of yours. Long story short I kinda find your videos more entertaining and informative
CrAzy what you can do when you put your mind too it your videos are probably my favorite on TH-cam just because you do it yourself love it 👍 keep it up can’t wait to see the final product
awesome project. I laughed when you mentioned factory wheel base looking goofy. All the trucks are pretensioned thinking of when old leaf springs flatten. Hence if you ever find a truck that looks "long and lean".. it has flat springs and most likely on a manual trans (engine braking flattens them). that is old hot rodder observation...and the reason Hellwig stepped up in the 40s.
So glad I subscribed to your channel. This build is legit. Some serious fabrication going on her dude. Love to see how this build is coming together, and you're not messing around bro! Looks awesome! Great build!
your work ethic makes for longs wait time between uploads and up dates, but its admirable how you work. do it once and properly, yeah shit not going to be perfect as you iron out issues a build has. but your foundation is going to be solid. i was not keen on a diesel build after your civic, but this is your playground and it shows. kick ass build man, cant wait to see you run this old gurl out of peoples lives. the compound setup is something i really cant wait to see. good job dude
Mate thats awsome, between Haden doing a front tubular chassis and you doing a rear, dude thats the shit, its gonna rip bro, you got a fully built sick ass motor in that.
Damn I love the explanation of the Back Half. This is my new favorite build keep up the great work. Hey man get some shirts I wanna help this build I will buy !!!!
We’re basically doing the same thing, I’m working on a 77 f100 putting a 6.0 powerstroke in it doing a full chassis tho, a lot of good information and tips in your videos
![[ TEASER ] เงาะป่า - วงL.กฮ. | TMG RECORD](http://i.ytimg.com/vi/M4ObdFfcPww/mqdefault.jpg)
![โรงเรียนตอนตี 2 โคตรหลอน..!! [โรงเรียนไดเม่]](http://i.ytimg.com/vi/2MAEMwqVYh8/mqdefault.jpg)
You kick ass at explaining the work ur doing and what's deen done off screen. Do some paid work videos its filler for more views and it should boost your algorithm just my two cents
👍👍from this guy
i would watch :)
Between this and Hayden's trigonometry lesson and welding tutorial with the 25.2 cage...hot rod porn!
Keep the breakdown/explanations conning!!
I would watch too, only thing is, it's more work for him after his actual job so if we could convince him that would be 👌👌
If you set the camera up and do them as time laps with some voice over it might work out well just my two cents
👍👍from this guy
Seriously tho I would watch
“I’m not a professional welder” 😂 until when are you saying this? You look professional to me bro
stacking dimes like it's nothing
Might not be a welder by trade, but if you don't think he and Hayden are super competitive...lol
I'm not a professional welder, then shows us professional welds. Lol
Back halfing started out so you could fit huge wheels and tires under the car then all the suspension stuff was developed for racing.
You have a great garage.
I feel like I signed up for Skillshare: How to Build Your Own Drag Race Truck
This is exactly what I was wanting to see from someone on here.
Video your work you do for customers. It will definitely keep us from getting bored and im sure youll gain more subscribers! Great content as usual
This content is SO MUCH BETTER than your Honda build! Diesel trucks is what you know and it really shows with your build! I also had know idea how good your fab skills are until the K10 build. Keep it up Wyatt this truck is going to be a beast and it will be very cool to see you beat up on some turbo Honda's.
things i like about this video. 1. the most comfortable looking fully reclined welding position. 2. supportive friend hanging out and drinking beer.
looks awesome, this would look so much better as a short bed
I want to see some day to day diesel work! Race truck looks legit!
This is my favorite project on TH-cam at the moment
This blows my mind
Enjoyed the content , I appreciate a clean and organized shop where the floor isn’t being used as a work bench.
Very nice to see a fellow Diesel Tech with a nice neat clean shop. Back in 2000 when i went to school every Friday was shop cleaning day. Although I was already a neat freak it drove me crazy but it's nice to see that you keep your shop clean.
That truck is gonna b rad as fuck can't wait to see what kinda power that diesel puts down
All kinds of talents! Still jealous of your shop!
You have a very clean shop. Nice job!!
Young Honda boys turn into v8 men every time
Once you taste power you usually want more, if you're really addicted.
@@123vaw123 bcuz Hondas dont make power, right? 🙄🤦♂️
I've seen Hondas totally destroy v8s there are Honda 4 bangers with over 1000 hp and half the weight who do you think would win that race yeah the honda
@@carlobrigante881 Carlo Brigante derrrp. Never said a Honda engine or a 4cyl, 6cy heck i5's? couldn't make power.... But no replacement for displacement... All I'm saying is, in some cases V8 setup would be cheaper & more power? It's simple.
@@TH-camforcedmetochangemyname why would I spend 5k on a Honda and gave to build the engine to make 700 wheel when I can buy an sc300, a 2jzge can hold 700wheel stock internals
Hell yeah! Wyatt upload on my day off. Can't wait to see this truck finished.
It's perfect and the welds were bad ass to dont sell your self short you are good at what you do bud
Looks awesome can't wait to she it rip I'm not a diesel guy but always enjoy learning something new
I like your slow and steady approach to your project rushing things just puts undue stress and ultimately causes mistakes. Do it once and do it right or do it wrong and do it twice. Keep up the good work at your pace and get some food, I'm sure your hungry..👍
Very underated channel my favorite real work. Good stuff 👍
You and Hayden should start a Fabrication and Mechanical workshop. You both do well. Truck is looking awesome.👍👍
I’m not going to lie I hate everything about diesels but afteri have been watching your post since your channel started now your on this truck I’m growing on them good work man I’m out in Oregon coming to Colorado this summer with my Fiancé and were getting married out there somwere haven’t found a place yet but would love to see this beast in person
Dude I just found your channel today because I was looking how people do a tube rear and getting ideas. You gained a subscriber you have a nice channel going man! Keep it up!
Sweet! Nice build can't wait for it to be running on all four!!!!
Looking good! Love how you don't sensor yourself either. It's a shop words and tools fly!!! Keep it up and ready to see more!
Censor*
Either way he doesn't censor or have a sensor... lol
Looking good love the wheelbase and stance
Now THIS is a Wyatt build! Good job buddy! Can't wait to see you run it!
True craftsmanship on this build.. I'm excited to see this completed ! Thanks for sharing !
I do a lot of Blender work. Good to see someone using it to figure out their fab work!
It's gonna be sweet when it's finished. Can't wait to see her rip the strip. Great info
I am a professional welder and a welding inspector...those welds look outstanding. rock on🤘
I really enjoy watching you work on your race truck I'm building one too and I was looking for ideas and how to's and watching you cleared up a lot of my questions thanks for the content I really do enjoy it I hope everything goes great for you God bless you
Hell yea keep up the good shit bro we need more fab work that others can find useful an this is definitely something to watch .
Your fab work looks great! Welds are mint
You know i never seen this build coming from you. This is nuts i cant wait to see it finished
thanks for the breakdown, keep up the awesome work
That truck is going to be so sick! I can't wait to see it finished and running in June!
Congratulations on all the work booked hopefully it keeps up
Welds looked good man. That truck is gunna be killa!!! Sucks you have to put it on the back burner but gotta keep the business going
1/2 of 10 is for sure 6, lol. Thanks for the content. Truck should be a screamer.
Not sure why I wasn’t subscribed till now. Awesome little tutorial. I’m building a ‘54 Fargo short box stepside this year. Wasn’t sure which way to go with suspension.... but I think I’m going to go a similar route in the rear now. Leafs up front. Probably going gasser style. Looking forward to the next instalment in this series.
Really great chassis tutorial, and a ton of useful information. You and Hayden are doing some great fabrication videos. Glad to see someone who takes pride in their work. You have a subscriber
Looks good Wyatt!
The truck looks great. This is one of my favorite builds on TH-cam.
I hope you get this finished before the season closes.
lol and kek
I love watching your build sweet looking truck can't wait to see it running.
That truck is looking great. Looking forward to seeing it rocket down the dragstrip
People are sleepin a wyatt channel. His content and video style are always solid. Keep it up brother
Can't wait to see it. Thanks for the videos
Loved this video. Explained everything very well. I would love to one day build a tube chassis/cage for my wrangler after it gets a powertrain swap.
I have to say 2 things: your videos are super well explained and very interresting. And props for having a shop 1000 times cleaner than your friends 👌💪. Props! I hope you'll keep posting often! :)
That's gonna be a fun truck man that's awesome and got me thinking about my f100. Good shit man.
“What some f’in cheese burgers” gets me every time... love it love what you do 🤛
Sick build love C10's keep it up
always love the content and really love this project
Real nice work fella... I love watchin this stuff
haven't watched tv in I don't know how many years, and due to the efforts like yours, Hayden, pfi, B-boys Cleetus etc.
I don't fucken miss it one bit.
You know I like the fact that you don't hold your tongue when it comes to cursing lol I never realized how much it bugged me with all the different car channels that don't swear until watching all of yours. Long story short I kinda find your videos more entertaining and informative
This trucks gonna be a monster.
CrAzy what you can do when you put your mind too it your videos are probably my favorite on TH-cam just because you do it yourself love it 👍 keep it up can’t wait to see the final product
awesome project. I laughed when you mentioned factory wheel base looking goofy. All the trucks are pretensioned thinking of when old leaf springs flatten. Hence if you ever find a truck that looks "long and lean".. it has flat springs and most likely on a manual trans (engine braking flattens them). that is old hot rodder observation...and the reason Hellwig stepped up in the 40s.
So glad I subscribed to your channel. This build is legit. Some serious fabrication going on her dude. Love to see how this build is coming together, and you're not messing around bro! Looks awesome! Great build!
Very sweet, looking bad ass, life happens lookong forward to next content
And you have computer skills. Professor Sketchy DA
Lol. Ad was for food. Of course the ad for you is about food. Boston Market. Watched it for you.
as a 3D guy, Those triangled polys!!!!
Every time you upload a video, you get more and more talented lol.. Keep up the hard work my man
love your content! So clean and organized. Makes me want to get my garage super organized.
“That being said” I liked the video
That thing is gonna be bad ass.
Hell yeah, Wyatt. Can't wait to see this!
It's looking good man
Nice work 👌👍
this truck is gonna be buck naastey
your work ethic makes for longs wait time between uploads and up dates, but its admirable how you work. do it once and properly, yeah shit not going to be perfect as you iron out issues a build has. but your foundation is going to be solid. i was not keen on a diesel build after your civic, but this is your playground and it shows. kick ass build man, cant wait to see you run this old gurl out of peoples lives. the compound setup is something i really cant wait to see. good job dude
Excellent job. Love it. Just found yr channel.
Was stoked to see this short bed 💔
Love your work and how well you explained things keep up the good work
Damn I wish that I lived closer to you, I would love to help you out with this build and that's even if I'm only the beer runner
Bad ass truck boss, I figured you were going to go with a Duramax motor for the Heart Beat of that beast.
This build is badass best on youtube by far. You know ur shit my dude!!!
Mate thats awsome, between Haden doing a front tubular chassis and you doing a rear, dude thats the shit, its gonna rip bro, you got a fully built sick ass motor in that.
Love the build
Should definitely upload more even film jobs at the shop always enjoy your content.
Damn I love the explanation of the Back Half. This is my new favorite build keep up the great work. Hey man get some shirts I wanna help this build I will buy !!!!
Dude you killed it with this one. I always look forward to your videos but this one was bad ass.
Excellent video and tutorial, just subscribed...
We’re basically doing the same thing, I’m working on a 77 f100 putting a 6.0 powerstroke in it doing a full chassis tho, a lot of good information and tips in your videos
Awesome video bro! The race truck is coming together quick! Love the frame work keep it up!
Sweet man keep up the good work and quality videos, you're only gonna get out what you put into it!
Great fab work!!!
Man I enjoy seeing you work on the c10, motivates me to work on mine lol
awesome, giving me ideas for my next build!
That is some nice ass fab work Wyat!!!
Great job!
Love the truck!!
If I lived near him and had a truck, I would be a regular customer!
Hell yeah brother good work 👍🏼
Not a huge truck guy what that thing makes me want to build one for sure good work brother keep it up