You need to add a front handle sliding tube so that you can push it forward to load a dart and pull it back to seal the tube. That way your left hand never leave the weapon and it always in the same position for every shot. And YES, I want one!
@@TheClumsyFairy I too am here to write the same thing... My other though it having a "trigger" that opens a valve at the mouth piece, so one could build up pressure and mechanically release it.
Or you could attach some pre-tensioned rubber to the sliding tube so you just need to push the sliding tube forward and then let it go. This way you could keep your hand in the forward position to aim.
Thank you for being awesome. Ive watched you since i was a kid and your videos still keep my undivided attention when they are on. I used to watch your videos every single day for hours and then go build similar things in my garage. You deffinently made an impact in my life and its really cool to see you still doing it. Thank you very much for your videos.
After i saw your first blowgun video 3 weeks ago i went to a local store in Berlin and bought a cheap 10€ blowgun (1m long / 1 cm diameter), including 12 darts. I was really surprised how good this works. I can achieve a maximum distance of slightly below 5 meters in my room (measured from the exit of the blowgun) and when i shoot them all, usually i am hitting most of them within a circle of about 10 cm what is closer than it sounds considering that the cones alone have a diameter of one cm. Also the power is impressive, even a strong can is nothing. When i am hitting a plywood plate it sticks around 1cm deep and i have to use pliers to get them out. Its also nice for small spaces because unlike with an airgun the darts don't bounce off on surfaces like stronger wood, where a bb or diablo does bounce off.
Yeah blowguns are a ton of fun! However my understanding of having fun with blowguns involves popping baloons at 40+ yards in my garden shooting a ballistic trajectory, but they can equally be a ton of fun with a very small target in an 8 yard room.
Jeorg great vid, I started watching you when I was 8 around 13 years ago, I haven’t watched you for a while but it’s nostalgic I’m coming back to watch every upload thanks for the vid ❤
Two things I would recommend: 1. If you have trouble with your air volume you can reduce the diameter of the darts plastic endpiece thing. So you can reduce the inner diameter of your blowgun tube. This would reduce the volume you need to blow the dart out of the tube and it would gain more speed. 2. The loading mechanism should work like on a pump gun. First pull back and than push forward to load the dart. This would allow your left hand to stay on the same point without doing the extra movement to the front of the tube after reloading. Combined with a front grip should give excellent stability. (Or stay to your mechanism and simply extend the loading tube so your hand is at the front of the blowgun after reload) I really excited to see how the journey will go on :D Better tube, sealing , your own darts, front grip, maybe a stock, aiming device, and and and....thank you Jörg for your work :)
First of all I would definitely buy it. And once again you revolutionize a very traditional weapon. You should try to figure out a way for the hand to end up near the holding position. Off the top of my head, You could put bands on the pump tube. Or move the magazine farther forward and have the rear of the dart drop in first (if that's possible).
I notice that you sometimes put your hand further down the barrel prior to shooting. Maybe you can extend the slide somehow to allow you to keep your hand further down the barrel for better control.
Oddly enough with traditional blowguns both hands are held right near the mouthpiece. Seems counterintuitive, but I'm not messing with some Amazonian with a deadly frog poison dart.
Hallo Jörg, als aktueller Europameister im 3D Blasrohrsport ist das für mich natürlich eine interessante Geschichte! Wobei ein Magazin wohl eher auf der Scheibe sein macht finde ich deine Konstruktion doch sehr innovativ!👍😉
I wonder if you could add sort of an extender to the pump action element, so that after performing the pump action the other hand is already in the correct position to use the blowgun.
Es ist super einfach zu erlernen!, selbst ohne Laser und für Asthmatiker ein Mega gutes Training für die Lunge ( habe selbst Asthma und auch blowguns von coldsteel). Ich muss sagen mal wieder eine geiler Idee mit klasse Umsetzung. LG Lütt'nPiet
Hi Joerg, I’ll buy 3-4 of these immediately for myself, and probably many more for gifts, depending on how well they function and the price. If you can keep them under $100 US (and I think that’s reasonable), you’ll have one of the best innovations ever for the blowguns community. Just make sure that it’s as powerful as the current Cold Steel offerings, and you’ll have almost everyone that shoots blowguns buying them.
I would buy it when you make the frontpart a little bit longer so that it is easier to catch it with your mouth. And ofcourse these other suggestions that people already made about the loading mechanism combined with a handle where you end up holding it in the right place for aiming.
Just watched this over on airgun 101 and came here to add a comment/suggestion. Left hand fixed fore grip with right hand grip attached to loading mechanism. I think this would give a more natural feel and should make quick reloading/firing
maybe a spring or an elastic rubber to make the loader return by itself leaving you free to hold the front of the blowgun with your hand without having to make that much movements.
I would suggest Tim Wells probably should do the collab quickly as annoying bears with a blow dart gun is a seriously daft move which presumably pisses off bears somewhat and leads to lots of running. Not sure why he wants to kill bears in the first place anyway.
@@ianh452 If Tim Wells has Joerg with him while hunting bears, it would improve Tim's chances of survival while running away, LOL No offence to Joerg... Tim looks like an expert runner.
I'm not sure, but listening to your blowing technique, I think you are making it much harder on yourself than it needs to be. I grew up with blowpipes and there is a specific technique to getting a projectile firing hard and accurate. You DON'T just blow and empty your lungs into it. You'll only get a weak projection. What you need to do it take a very deep breath, put your tongue over the hole and you start to exhale rapidly, but before you can fill your cheeks up with air, you quickly release your tongue. That way you get the maximum amount of air hitting your projectile. It will go further, hit harder and be more accurate. It takes a little practice, but once you 'get it' you will notice the dramatic difference.
Increasing the fire rate seems like it would increase the likelihood of 'backfiring' between shots, maybe adding a valve would increase the safety and therefore comfort of firing the blowpipe, and make it a more fluid experience rather than assuring your safety through a sequence of actions. Also I'm not sure if anyone has pointed out if you did this in rapid succession it would look like you're the kind of guy plywood and steel would pay an extra 20 euros for, have you considered lever action?
From America - My Dad & I find your work to be both hilarious & Ingenious! LOL! You do this like a child plays with toys! how fun?! LOL! I mean this blowgun paired with your laser augmentation seems to have enabled you to have almost %100 accuracy at that range eh? very cool! Do you think that you will perhaps make more versions or variations to this blowgun such as maybe an automatic dart cartridge feeder? or dual or triple shot "Shotgun Blow back gun"? would love to see it! Cheers!
What about attaching some pre-tensioned rubber to the sliding tube so you just need to push the sliding tube forward and then let it go. This way you could keep your hand in the forward position to aim.
With a blow forward action where the entire barrel moves back and forth you would completely eliminate the front air seal. The piece that now moves would have to be fixed in place, and would not need to be seamless.
Great video and great blowgun! Is there any reason why you don't hold the blowgun by the middle with your left hand and operate the pump action with your right? I think you could remain aiming at your target and shoot continuously like with a pump action shotgun 💜
What about lawmaking in the future, since you can't see if these kind of weapons are loaded or not. Will they be the same as airguns with magazines as in law?
Hey Joerg, give it a vertical/angled grip on the slide, at least optionally maybe? You could even have the "use position" have the magazine sideways to the left and to reload it you would turn the blowgun sideways (the "pistol grip" currently in the horizontal position would then be vertical during the reload). This way you could have a red dot or iron sights (I suppose on a picatinny rail) and if you decide to give it any sights at all by default, I would make it possible to adjust it since not all faces are the same. If you gave it a stock you would have evolved it into a firearm looking thing (maybe that defeats the purpose of the blowgun aspect of it?)
Hi Jörg, warum machst du keine deutsche Version mehr? Und was diese coole Erfindung angeht - ich finde der hintere Griff ist zu kurz und dünn, und vorne fehlt auch einer, um die Waffe besser halten und damit zielen zu können. Kimme und Korn fehlt auch... ;) Eine ultimative Weiterentwicklung wäre es vielleicht, um schneller zu sein, per Knopfdruck komprimierte Luft die Darts herauszuschießen zu lassen, und 'ne fixe Automatik holt das Rohr wieder zurück. Mir ist auch plötzlich in den Sinn gekommen, ob man das ganze nicht auch in einer Railgun Version herstellen könnte? Also mit elektromagnetischem Schlitten, aber Darts anstatt Kugeln.
I know you mentioned you can't add a canister to it because it would be considered an air gun But is there a possibility of threading the barrel which has a high chance of matching a canister and trigger that is on the market?
Sehr coole Idee. Aber wäre es nicht besser das Magazin seitlich oder auf der Unterseite zu positionieren (Pfeilzuführung dann per Federdruck), damit man besser zielen kann? Das Magazin oben blockiert sicherlich die Sicht. Also ich würde gerne eins erwerben.
Könnte man nicht bei der äußeren Tube (Stahlrohr) eine Feder einbauen, dass der "Verschluss" immer nach hinten gedrückt wird? Und einen Frontgriff für stabileres und bequemeres zielen in Kombination mit einer 45° angewinkelten picatinny Schiene die man durch 180 grad drehen für rechts- oder Linkshänder kompatibel montieren kann? Das mit dem Winkel sollte einfach mit einer montierten Schiene wo der laser sitzt und einem picatinny winkel den man darauf montiert möglich sein. Würde da jedoch auf Kunststoff setzen wegen Gewichtseinsparung ...
A little over sixty years ago, I found a broken car aerial in my dad's garage. And made a - small - blowpipe out of one of the sections. It worked, but it was only about 30cm, so not much range. Nevertheless, I got busted at school, for possession of a 'lethal weapon'?! Then I started smoking - and that was that. Oh well. Fortunately, we have our very own mad scientist!
I kind of think in the terms of potato gun but what about having a bicycle pump feeding into a bigger tank. Then you could release it with a trigger instead of having to use human power. He was like a larger 2liter soda bottle. Reusable and available I'm assuming
One functional thing i noticed is that you have to move your hand after cocking to farther down the barrel. If you could make the action go in REVERSE (ie. back then forward like a bolt action rifle) with a handle down at the firing position, I think that would be a better functioning weapon.
But then it would push the dart way to the front. That would be counter productive for performance. Jörg needs the acceleration distance inside the barrel. So every cm counts.
Als Tierarzt mit teilweise renitenten Patienten, welche Teleinjektion per Blasrohr erfordern bin ich sofort angefixt. Eine Version mit Injektionsprojektilen wäre mein Traum 😸✌
He needs to make a version for blowguns like cold steel big bore blowguns so if a person already has one they can buy it to put on theirs and have fun all day and hack yes I want one right now
Maybe if it had a pipe of high-strength carbon-fiber. Not really necessary with the big ammo-dump? Would se Joerge put his teeth into a revolving ammo-dump type of resolution with a 2 mm high strength carbon-fiber solution.
Joerg between every shot: ( ͡° ͜ʖ ͡°)
Lol
Joerg:*being confident
LMAO that smile when he turns to the camera every time he pumps the action... has me dieing. I love you brother never change.
me too!😁
You need to add a front handle sliding tube so that you can push it forward to load a dart and pull it back to seal the tube. That way your left hand never leave the weapon and it always in the same position for every shot. And YES, I want one!
I was about to write the exact same thing.
Yep, that would do it, besides a carbon-fiber tubing as well...?
Came to comment on adding a foregrip, but this idea is even better!
@@TheClumsyFairy I too am here to write the same thing...
My other though it having a "trigger" that opens a valve at the mouth piece, so one could build up pressure and mechanically release it.
Or you could attach some pre-tensioned rubber to the sliding tube so you just need to push the sliding tube forward and then let it go. This way you could keep your hand in the forward position to aim.
Thank you for being awesome. Ive watched you since i was a kid and your videos still keep my undivided attention when they are on. I used to watch your videos every single day for hours and then go build similar things in my garage. You deffinently made an impact in my life and its really cool to see you still doing it. Thank you very much for your videos.
The humility of missing 1 dart just because the mag has 6 shots anyways. Was ein Goldstück, der Jörg
Jorg side-eyeing us like a true dad
I need one already !!! :D
Ah, one of those tactical assault blowguns that are banned in Canada. :)
Smart idea, and well made!
Yup even the target shooting single shot ones are like owning a full auto rifle here
The way he smirks into the camera after every shot like a proud little child 😄
A silicone or rubber washer around the inner pipe near the mouth might make a better air tight seal where the sliding pipe hits the end stop.
He knows
That's a good suggestion.
After i saw your first blowgun video 3 weeks ago i went to a local store in Berlin and bought a cheap 10€ blowgun (1m long / 1 cm diameter), including 12 darts.
I was really surprised how good this works. I can achieve a maximum distance of slightly below 5 meters in my room (measured from the exit of the blowgun) and when i shoot them all, usually i am hitting most of them within a circle of about 10 cm what is closer than it sounds considering that the cones alone have a diameter of one cm.
Also the power is impressive, even a strong can is nothing. When i am hitting a plywood plate it sticks around 1cm deep and i have to use pliers to get them out. Its also nice for small spaces because unlike with an airgun the darts don't bounce off on surfaces like stronger wood, where a bb or diablo does bounce off.
Yeah blowguns are a ton of fun! However my understanding of having fun with blowguns involves popping baloons at 40+ yards in my garden shooting a ballistic trajectory, but they can equally be a ton of fun with a very small target in an 8 yard room.
@@georgewashington1621Yeah, i would love that too, but i have no possibility in Berlin without a garden atm.
Jeorg great vid, I started watching you when I was 8 around 13 years ago, I haven’t watched you for a while but it’s nostalgic I’m coming back to watch every upload thanks for the vid ❤
When you think craziness can't build up any more... there comes another video.
Two things I would recommend:
1. If you have trouble with your air volume you can reduce the diameter of the darts plastic endpiece thing.
So you can reduce the inner diameter of your blowgun tube. This would reduce the volume you need to blow the dart out of the tube and it would gain more speed.
2. The loading mechanism should work like on a pump gun. First pull back and than push forward to load the dart.
This would allow your left hand to stay on the same point without doing the extra movement to the front of the tube after reloading.
Combined with a front grip should give excellent stability.
(Or stay to your mechanism and simply extend the loading tube so your hand is at the front of the blowgun after reload)
I really excited to see how the journey will go on :D
Better tube, sealing , your own darts, front grip, maybe a stock, aiming device, and and and....thank you Jörg for your work :)
I've been subscribed to you since 08. I'm glad I did. Keep it going
First of all I would definitely buy it. And once again you revolutionize a very traditional weapon.
You should try to figure out a way for the hand to end up near the holding position.
Off the top of my head, You could put bands on the pump tube.
Or move the magazine farther forward and have the rear of the dart drop in first (if that's possible).
What a brilliant and fun channel.
I notice that you sometimes put your hand further down the barrel prior to shooting. Maybe you can extend the slide somehow to allow you to keep your hand further down the barrel for better control.
...or add an extension that links the slide for the loading mechanism to a sliding grip that ends up in a good place for aiming
@@The_Dirt_Guruyou read my mind.
Oddly enough with traditional blowguns both hands are held right near the mouthpiece. Seems counterintuitive, but I'm not messing with some Amazonian with a deadly frog poison dart.
Or a foregrip attached to the slide
Hallo Jörg, als aktueller Europameister im 3D Blasrohrsport ist das für mich natürlich eine interessante Geschichte!
Wobei ein Magazin wohl eher auf der Scheibe sein macht finde ich deine Konstruktion doch sehr innovativ!👍😉
You pump out the most innovative stuff. I hope patents protect against copycats.
Joerg, ich bin immer wieder begeistert was du alles erfindet😀👍👍
I love the cool gadgets you come up with!
I wonder if you could add sort of an extender to the pump action element, so that after performing the pump action the other hand is already in the correct position to use the blowgun.
Es ist super einfach zu erlernen!, selbst ohne Laser und für Asthmatiker ein Mega gutes Training für die Lunge ( habe selbst Asthma und auch blowguns von coldsteel). Ich muss sagen mal wieder eine geiler Idee mit klasse Umsetzung.
LG Lütt'nPiet
Hi Joerg,
I’ll buy 3-4 of these immediately for myself, and probably many more for gifts, depending on how well they function and the price. If you can keep them under $100 US (and I think that’s reasonable), you’ll have one of the best innovations ever for the blowguns community.
Just make sure that it’s as powerful as the current Cold Steel offerings, and you’ll have almost everyone that shoots blowguns buying them.
Slide the other tube to seal the main barrel and fix the dart position with a little suction, BRILLIANT. Simple yet effective solution.
I would buy it when you make the frontpart a little bit longer so that it is easier to catch it with your mouth. And ofcourse these other suggestions that people already made about the loading mechanism combined with a handle where you end up holding it in the right place for aiming.
This is awesome. Please keep us posted. It would make rat problems in our coffee farm much easier to address
Just watched this over on airgun 101 and came here to add a comment/suggestion.
Left hand fixed fore grip with right hand grip attached to loading mechanism. I think this would give a more natural feel and should make quick reloading/firing
maybe a spring or an elastic rubber to make the loader return by itself leaving you free to hold the front of the blowgun with your hand without having to make that much movements.
I think the guy that takes out bears with blow guns your referring to is Tim Wells Bow Hunter! A collab between you two would be really interesting!
I would suggest Tim Wells probably should do the collab quickly as annoying bears with a blow dart gun is a seriously daft move which presumably pisses off bears somewhat and leads to lots of running. Not sure why he wants to kill bears in the first place anyway.
Smaller Black Bears is good food. Finest kind.@@ianh452
@@ianh452 If Tim Wells has Joerg with him while hunting bears, it would improve Tim's chances of survival while running away, LOL
No offence to Joerg... Tim looks like an expert runner.
I'm not sure, but listening to your blowing technique, I think you are making it much harder on yourself than it needs to be.
I grew up with blowpipes and there is a specific technique to getting a projectile firing hard and accurate.
You DON'T just blow and empty your lungs into it. You'll only get a weak projection.
What you need to do it take a very deep breath, put your tongue over the hole and you start to exhale rapidly, but before you can fill your cheeks up with air, you quickly release your tongue. That way you get the maximum amount of air hitting your projectile.
It will go further, hit harder and be more accurate.
It takes a little practice, but once you 'get it' you will notice the dramatic difference.
Increasing the fire rate seems like it would increase the likelihood of 'backfiring' between shots, maybe adding a valve would increase the safety and therefore comfort of firing the blowpipe, and make it a more fluid experience rather than assuring your safety through a sequence of actions.
Also I'm not sure if anyone has pointed out if you did this in rapid succession it would look like you're the kind of guy plywood and steel would pay an extra 20 euros for, have you considered lever action?
This man has far too much time and endless creativity on his hands. I absolutely love this mad genius😂
7:11 do you mean Tim Wells ? That guy is a blowgun menace 😂
Yes please commercialise this. Beta2 is even better than the first! Looking forward to buying one! Thanks again!
From America - My Dad & I find your work to be both hilarious & Ingenious! LOL! You do this like a child plays with toys! how fun?! LOL! I mean this blowgun paired with your laser augmentation seems to have enabled you to have almost %100 accuracy at that range eh? very cool! Do you think that you will perhaps make more versions or variations to this blowgun such as maybe an automatic dart cartridge feeder? or dual or triple shot "Shotgun Blow back gun"? would love to see it! Cheers!
I miss your instant legolas lass videos
What about attaching some pre-tensioned rubber to the sliding tube so you just need to push the sliding tube forward and then let it go. This way you could keep your hand in the forward position to aim.
With a blow forward action where the entire barrel moves back and forth you would completely eliminate the front air seal. The piece that now moves would have to be fixed in place, and would not need to be seamless.
Ich liebe diesen Humor 😂😂😂❤❤❤
Awesome 👏 great accuracy 👍
Thank you for keep making videos man !!!!
I think NINJAS will love it,as far as I know it´s one of their secret weapons...!!! 😂
Great video and great blowgun! Is there any reason why you don't hold the blowgun by the middle with your left hand and operate the pump action with your right? I think you could remain aiming at your target and shoot continuously like with a pump action shotgun 💜
What about lawmaking in the future, since you can't see if these kind of weapons are loaded or not. Will they be the same as airguns with magazines as in law?
This guy’s happiness is something to behold
I definitely would buy one.
Sehr gut . Can you run around in the Schwartzwalt with that pipe? Nice show mate!
Hey Joerg, give it a vertical/angled grip on the slide, at least optionally maybe?
You could even have the "use position" have the magazine sideways to the left and to reload it you would turn the blowgun sideways (the "pistol grip" currently in the horizontal position would then be vertical during the reload). This way you could have a red dot or iron sights (I suppose on a picatinny rail) and if you decide to give it any sights at all by default, I would make it possible to adjust it since not all faces are the same.
If you gave it a stock you would have evolved it into a firearm looking thing (maybe that defeats the purpose of the blowgun aspect of it?)
Joerg Silent Assassin ! :D
The drop of those darts in flight reminds me of 50mm Aerial cannon :D
I made one out of a pen, a nail, and 2 ft peace of pvc tube. Worked good
Great job
AWESOME!!! Please let us know if you go hunting with that blowgun!!!
Hi Jörg, warum machst du keine deutsche Version mehr?
Und was diese coole Erfindung angeht - ich finde der hintere Griff ist zu kurz und dünn, und vorne fehlt auch einer, um die Waffe besser halten und damit zielen zu können. Kimme und Korn fehlt auch... ;)
Eine ultimative Weiterentwicklung wäre es vielleicht, um schneller zu sein, per Knopfdruck komprimierte Luft die Darts herauszuschießen zu lassen, und 'ne fixe Automatik holt das Rohr wieder zurück.
Mir ist auch plötzlich in den Sinn gekommen, ob man das ganze nicht auch in einer Railgun Version herstellen könnte? Also mit elektromagnetischem Schlitten, aber Darts anstatt Kugeln.
I know you mentioned you can't add a canister to it because it would be considered an air gun
But is there a possibility of threading the barrel which has a high chance of matching a canister and trigger that is on the market?
You've done a great job on that blowgun Joerg!
Cool! Das würde ich mir kaufen, tolles Bauchmuskel Training und Lungentraining 😂❤
Joerg never disappoints.
Your laugh has been one of the most addictive things on youtube for years and your inventions never fail to impress me. Love the channel l!
This is beautiful!
Sehr coole Idee. Aber wäre es nicht besser das Magazin seitlich oder auf der Unterseite zu positionieren (Pfeilzuführung dann per Federdruck), damit man besser zielen kann? Das Magazin oben blockiert sicherlich die Sicht.
Also ich würde gerne eins erwerben.
Innovation! Keep it going 😁
In-fricken-genius bro...dang!!!
me and my friends came up with a similar designee except it was singular, bolt fed, so you cock the bolt and replace your dart.
Only the poison dart frogs from the Amazon are missing! (Strawberry frog) I like it very much 👍! When is it available to buy?
Könnte man nicht bei der äußeren Tube (Stahlrohr) eine Feder einbauen, dass der "Verschluss" immer nach hinten gedrückt wird?
Und einen Frontgriff für stabileres und bequemeres zielen in Kombination mit einer 45° angewinkelten picatinny Schiene die man durch 180 grad drehen für rechts- oder Linkshänder kompatibel montieren kann?
Das mit dem Winkel sollte einfach mit einer montierten Schiene wo der laser sitzt und einem picatinny winkel den man darauf montiert möglich sein. Würde da jedoch auf Kunststoff setzen wegen Gewichtseinsparung ...
A little over sixty years ago, I found a broken car aerial in my dad's garage.
And made a - small - blowpipe out of one of the sections.
It worked, but it was only about 30cm, so not much range.
Nevertheless, I got busted at school, for possession of a 'lethal weapon'?!
Then I started smoking - and that was that.
Oh well.
Fortunately, we have our very own mad scientist!
Teemo has a more interesting origin story than I thought.
This is literally one of the coolest things i've ever seen, I almost alittle envious that you came up with this 😂
Wie sieht es eigendlich mit dem legalen OTF Messer aus mit manueller Verriegelung?
I kind of think in the terms of potato gun but what about having a bicycle pump feeding into a bigger tank. Then you could release it with a trigger instead of having to use human power. He was like a larger 2liter soda bottle. Reusable and available I'm assuming
You're a married man Joerg, don't look at me like that between every shot ;)
The best sliding tube🇧🇷
a hand grip on the slide would help a lot.
It's this legal in UK (considering Cold Steel blow pipes are illegal)?
Hi Jörg
Wann kommt deine neue Armbrust auf dem Markt
Wow wish I had that one instead of my old blowgun when I was a kid
which blowgun (with revolver style magazine) is he talking about???
Aber gerne mehr davon 👍👍👍
i could see myself using a blowgun for survival hunting purposes if it were compact enough to fit into a bugout/bushcraft bag
Can you use compressed air to make that blowgun more powerful?
Pretty cool design!
That's sweet 😊
what if we use 300psi of air pressure (powerful lungs) to accelerate these very interesting projectiles? wonde rwhat would happen.
Wie kannst denn auch anders sein - Jörg macht's!👍
You Are Just Amazing ! 😂
Can you add a mouth cone and have a longer barrel?
That shit eating grin! LOL Awesome as usual Joerg
“Barrel length way too short to be powerful”
That hits too close to home! 😢😢
Haahaahaa
saya suka karyamu tuan
One functional thing i noticed is that you have to move your hand after cocking to farther down the barrel. If you could make the action go in REVERSE (ie. back then forward like a bolt action rifle) with a handle down at the firing position, I think that would be a better functioning weapon.
But then it would push the dart way to the front. That would be counter productive for performance. Jörg needs the acceleration distance inside the barrel. So every cm counts.
What stops the idea of adding a trigger and a co2 cartridge pretty much a dart gun or even using blanks
Als Tierarzt mit teilweise renitenten Patienten, welche Teleinjektion per Blasrohr erfordern bin ich sofort angefixt. Eine Version mit Injektionsprojektilen wäre mein Traum 😸✌
Dann such mal Jörgs Video mit der HDS68 und den Betäubungspfeilen... 😉
He needs to make a version for blowguns like cold steel big bore blowguns so if a person already has one they can buy it to put on theirs and have fun all day and hack yes I want one right now
0:36 Mich würde interessieren ob eine 7,5 Joule Airgun Pistole die mit nur Pfefferkugeln geladen nicht mit dem kleinen Waffenschein frei fürbar ist
Nein, darfst Du nur mit dem großen Waffenschein führen.
You can add a pcp air gun tank.
Maybe if it had a pipe of high-strength carbon-fiber.
Not really necessary with the big ammo-dump?
Would se Joerge put his teeth into a revolving ammo-dump type of resolution with
a 2 mm high strength carbon-fiber solution.
Einfach genial :)
Very cool. Sign me up for one!