Thank you cole tool centre for this video I was searching how to setup my foot pedal for use as the marking button and you just blurted it out as soon as you started the software, it was exactly what I needed and now am using it to mark all my tools with my logo.
I have noticed that this type of machine has no covers on it. Is this dangerous? What if you slip and get your hand in the way? Also do you need to wear goggles when marking stainless or aluminium? Thanks for the video!
Goggles yes. You can look up videos of people putting their hands in front of the fiber laser and it not doing anything. This is even with those 1000w rust remover laser "guns". If you put your hand in front of a co2 laser you will get torched. lol
I ordered through an alibaba supplier when ordering ensure if purchasing a rotary attachment chec the software is suitable for doing graffic with solid fill and not miss Engraving where the attachment rotates.
I ordered through an alibaba supplier when ordering ensure if purchasing a rotary attachment check the software is suitable for doing graffic with solid fill and not miss Engraving where the attachment rotates.
Hello, we are a production factory.Are you interested in knowing? My contact information is attached below wechat/whatsapp/skype: +86 18563596493 or my Email rachelgao@qintanglaser.com
Is seem the frequency the fibre laser uses has little or no effect on skin there are video's on TH-cam with people putting there hand in the beam. I tried marking acrylic, the aluminium underneath was marked with no effect on the acrylic.
I have the same machine but it only shows 1 red dot laser where do i setup settings to show 2 red dots get them aligned and show the red border where font will engrave? Thank you
Can this engrave stainless steel? I want to engrave metal business cards. Also, do you know if this is a QS or QB model laser, and from your knowledge which do you recommend.
Yes this can deep engrave most metals. I am unsure on the model sorry. Make sure if you buy a machine they sell you software hardware suitable for Graphix not just text if you intend to do any ROTARY engraving.
I seems to be OK but I only purchased as a demo machine to see how it performs and decide if I wanted to import. So I do not use very often and have my demo machine for sale.
Cole Tool Centre thanks for the reply, I’m think I’m going to go ahead and make the purchase for one, hopefully everything turns out well. No one seems to have this machine in my area
If you are going to purchase and want to use the rotary chuck with "graffic" confirm with the supplier that it will do graffic on rotary correctly without leaving lines the software they surplied with my machine was supposed to be capable but after a long period of trying the said I had to upgrade the main board and software to do graffic on rotary table without leaving lines when it rotated to next position. Rotary text is OK.
Hello, we are a production factory. Are you interested in knowing? My contact information is attached below wechat/whatsapp/skype: +86 18563596493 or my Email rachelgao@qintanglaser.com
I purchased from alibaba and imported as a sample to check quality and performance if you are in Australia I would be interested in selling my demo machine.
Hello, we are a production factory. Are you interested in knowing? My contact information is attached below wechat/whatsapp/skype: +86 18563596493 or my Email rachelgao@qintanglaser.com
Most pet tags are anodized aluminium which you can do with a much cheaper co2 laser the fibre laser is for marking directly on metal like stainless steel
WTH? You completely skipped the part between unboxing and plugging it in! 🤦♀ I came here because no instructions on assembling the machine were given with mine.
Thank you cole tool centre for this video I was searching how to setup my foot pedal for use as the marking button and you just blurted it out as soon as you started the software, it was exactly what I needed and now am using it to mark all my tools with my logo.
Thanks for taking the time to prepare the video!
I have noticed that this type of machine has no covers on it. Is this dangerous? What if you slip and get your hand in the way? Also do you need to wear goggles when marking stainless or aluminium? Thanks for the video!
Goggles yes. You can look up videos of people putting their hands in front of the fiber laser and it not doing anything. This is even with those 1000w rust remover laser "guns". If you put your hand in front of a co2 laser you will get torched. lol
Sundor Laser factory can provide this machine,contact sales001@sunlaser.cn whatsapp:+86 18511761675
does the ground wire at the bottom of the machine need to be grounded?
Great video! thanks! Question, what's the difference between Ezcad 2 and 3, and is it worth paying more for 3?
Sorry I don't know. Thanks
The depth of Engraving is dependant on the type of metal the power used and the number of repeats.
Is it just the lighting, or are the power buttons on your box NOT illuminating when you press them to engage power?
Sorry I can't help I sold the machine Years ago.
Very helpful video! Thank you!
Was the program that was included in the usb, only a demo??
From memory the full program
there were also many versions of the program able to be downloaded from the web
I ordered through an alibaba supplier when ordering ensure if purchasing a rotary attachment chec the software is suitable for doing graffic with solid fill and not miss Engraving where the attachment rotates.
alibaba is bad.
same as bank transfer.
@@jimaecalors7986 th-cam.com/video/0ca6605O3Yo/w-d-xo.html
Sundor Laser factory can provide this machine,contact sales001@sunlaser.cn whatsapp:+86 18511761675
From memory price was about $5000 usd in china
th-cam.com/video/7YKY2W2-1RI/w-d-xo.html If you need can contact me
ttps://th-cam.com/video/0ca6605O3Yo/w-d-xo.html hi, dear friend have my contact information in the video
Sundor Laser factory can provide this machine with cheaper price and same quality,contact sales001@sunlaser.cn whatsapp:+86 18511761675
So, if you grab the corner of the box in EZCAD and make it bigger or smaller the size of the laser box on the worktable will also resize accordingly?
I no longer have the machine. from memory I think you have to set the work area in the menu's
Yes, Aaron.
I want to buy a 100w fiber laser marking machine. please help me which brand is good work
Sorry I am no help with your decision
where did you bought it?
I ordered through an alibaba supplier when ordering ensure if purchasing a rotary attachment check the software is suitable for doing graffic with solid fill and not miss Engraving where the attachment rotates.
sales002@sunlaser.cn whatsapp + 86 18511761659
th-cam.com/video/0ca6605O3Yo/w-d-xo.html hi, dear friend have my contact information in the video
Sundor Laser factory can provide this machine,contact sales001@sunlaser.cn whatsapp:+86 18511761675
Hello, we are a production factory.Are you interested in knowing? My contact information is attached below wechat/whatsapp/skype: +86 18563596493 or my Email rachelgao@qintanglaser.com
Is seem the frequency the fibre laser uses has little or no effect on skin there are video's on TH-cam with people putting there hand in the beam. I tried marking acrylic, the aluminium underneath was marked with no effect on the acrylic.
acrylic need co2 laser, fiber laser not do it
I have the same machine but it only shows 1 red dot laser where do i setup settings to show 2 red dots get them aligned and show the red border where font will engrave? Thank you
I have sold my machine but the laser control I believe was in the setup menu. When you are getting ready to engrave.
Can you tell me where you ordered this from?
factory direct WhatsApp:+86-133-4627-2057. Email: justin@jnruijie.com
th-cam.com/video/0ca6605O3Yo/w-d-xo.html hi, dear friend have my contact information in the video
Sundor Laser factory can provide this machine,contact sales001@sunlaser.cn whatsapp:+86 18511761675
Can this engrave stainless steel? I want to engrave metal business cards. Also, do you know if this is a QS or QB model laser, and from your knowledge which do you recommend.
Yes this can deep engrave most metals. I am unsure on the model sorry. Make sure if you buy a machine they sell you software hardware suitable for Graphix not just text if you intend to do any ROTARY engraving.
th-cam.com/video/s9_dUKAsLeU/w-d-xo.html, marking on ss, If you need can contact me
No problem to engrave stainless steel,Sundor Laser factory can provide this machine,contact sales001@sunlaser.cn whatsapp:+86 18511761675
How is it holding up? ive been contemplating of buying one
I seems to be OK but I only purchased as a demo machine to see how it performs and decide if I wanted to import. So I do not use very often and have my demo machine for sale.
Cole Tool Centre thanks for the reply, I’m think I’m going to go ahead and make the purchase for one, hopefully everything turns out well. No one seems to have this machine in my area
If you are going to purchase and want to use the rotary chuck with "graffic" confirm with the supplier that it will do graffic on rotary correctly without leaving lines the software they surplied with my machine was supposed to be capable but after a long period of trying the said I had to upgrade the main board and software to do graffic on rotary table without leaving lines when it rotated to next position. Rotary text is OK.
@@Graemecns thank you for that tip I
guess thats my only worry to find a good supplier lol
@@cudd14 th-cam.com/video/0ca6605O3Yo/w-d-xo.html hi, dear friend have my contact information in the video
كم سعر المكنة ٢٠واط ٣٠واط ٥٠واط مع المواصفات الفنية للمكنة
how much you this machine?
th-cam.com/video/7YKY2W2-1RI/w-d-xo.html If you need can contact me
th-cam.com/video/0ca6605O3Yo/w-d-xo.html hi, dear friend have my contact information in the video
Sundor Laser factory can provide this machine,contact sales001@sunlaser.cn whatsapp:+86 18511761675
Hello, we are a production factory. Are you interested in knowing? My contact information is attached below wechat/whatsapp/skype: +86 18563596493 or my Email rachelgao@qintanglaser.com
Can u share the link where u purchased this from please...
I purchased from alibaba and imported as a sample to check quality and performance if you are in Australia I would be interested in selling my demo machine.
@@Graemecns what's ur email address???
@@princeodinson3239 sales@coletoolcentre.com.au
@@Graemecns Are you still try to sell this one?
@@princeodinson3239 th-cam.com/video/0ca6605O3Yo/w-d-xo.html hi, dear friend have my contact information in the video
At wht price did you got
ttps://th-cam.com/video/0ca6605O3Yo/w-d-xo.html hi, dear friend have my contact information in the video
Hello, we are a production factory. Are you interested in knowing? My contact information is attached below wechat/whatsapp/skype: +86 18563596493 or my Email rachelgao@qintanglaser.com
What is the brand of this fiber laser?
Purchased from Shandong Shuangjing CNC Laser Equipment Co Ltd
th-cam.com/video/0ca6605O3Yo/w-d-xo.html hi, dear friend have my contact information in the video
Sundor Laser factory can provide this machine,contact sales001@sunlaser.cn whatsapp:+86 18511761675
Link ?
🙏
can you do one where you laser pet id tags?
Most pet tags are anodized aluminium which you can do with a much cheaper co2 laser the fibre laser is for marking directly on metal like stainless steel
Does this machine also cut ?
I would say no in practical terms with many many passes it will get through very thin material say "aluminium can"
50w 60w 100w can cutting 0-1mm metal sheet.
@@Graemecns it does. takes multi passes.. looks like crap. if you want cutting buy a cnc plasma cutter
You need at least 200-250 watts to cut aluminum, so you are in the CO2 laser range.
WTH? You completely skipped the part between unboxing and plugging it in! 🤦♀ I came here because no instructions on assembling the machine were given with mine.
me puedes enviar el manual de operacionrs
ttps://th-cam.com/video/0ca6605O3Yo/w-d-xo.html hi, dear friend have my contact information in the video
Price
factory direct WhatsApp:+86-133-4627-2057. Email: justin@jnruijie.com
th-cam.com/video/7YKY2W2-1RI/w-d-xo.html If you need can contact me
th-cam.com/video/0ca6605O3Yo/w-d-xo.html hi, dear friend have my contact information in the video
Sundor Laser factory can provide this machine,contact sales001@sunlaser.cn whatsapp:+86 18511761675
What's the price plz
th-cam.com/video/7YKY2W2-1RI/w-d-xo.html If you need can contact me
th-cam.com/video/0ca6605O3Yo/w-d-xo.html hi, dear friend have my contact information in the video
Sundor Laser factory can provide this machine,want price?contact sales001@sunlaser.cn whatsapp:+86 18511761675