I love your vids bruh, so great and so informative, now you got me thinking of doing these also on my 2024 zx6r heh, wonder if you also noticed the horns on our bikes are too quiet.. thinking of changing it too.. if you have any plans changing it, please do make a vid as well. Thanks!
Good video. I’ve been looking to get a tail tidy but didn’t want to lose turn signals and get an integrated tail light. This is a good way to get rid of the bulkiness and still comply with the law that states the turn signals need to be 12 inches from each other.
Quick tip to those who want to use the factory lights inside of them, there is a plastic piece you can take out and put back in once you put that rubber piece onto the tail tidy
Question can you leave the servo for the exhaust in without getting a servo buddy and it not throwing a engine light when you get a exhaust upgrade like a M4 slip on
Just wanted to thank you for the simple explanation and tips on how to do this. I bought the same bracket and just installed it with the help of this video while also using your exhaust video to remove the servo cables. Thanks again
Hey Bud. I was watching your video about taking the servo cable only on the servo with your after market exhaust. Did you got any check engine light lately since you install the ebay exhaust?
Well Indian is announcing a new scout model on April 2, so I think we should wait and see what it looks like. Supposedly a new high hp engine, shorter wheelbase, different frame, it sounds like a totally new bike
www.kawasakipartswarehouse.com/oemparts/p/kawasaki/23037-0551/lamp-assy-signal-led-rr-rh www.kawasakipartswarehouse.com/oemparts/p/kawasaki/23037-0552/lamp-assy-signal-led-rr-lh They are $115 each if you want the exact OEM Kawasaki signals. I would go aftermarket if I were you
Heyy quick question! So i just got rid of the servo wires for new exhaust. In your video you said if the servo gets removed the check engine light will come on. Im also going to install fender eliminator. Will moving the servo turn the check engine light for me or should it be fine?
I have de-catted the factory header, put that no name link pipe and muffler on, and the ECU has a Moore Mafia tune on it. I have videos on everything, check out the channel, links are always in the description for all parts used 👍
I'm actually thinking on getting this fender eliminator for my zx6r .. but I don't know if I should get any after-market turn signals or leave the ones from factory ... do you know any good aftermarket turn signals?
You could get whatever signals look best to you and then just splice them to the wire and connectors of your factory signals, so it's plug and play then
@bikesandbangs wts up bro ... I tried to change mine, but I instead of the factory signals I got an after market signals, when I installed it I notice they were not working good.. so I put back the factory signals , but now they not flashing, not even on the dash .. do you think I messed up something??? 😅😅😅... heeeeelp !!!
Did the aftermarket ones have connectors that plugged straight into the bike or did u splice them onto the harness and connector of the factory signals?
Ah, my absolute must do mod, no questions asked, for anyone with a sportbike.
Yep, no doubt
Factoids!
Just put my fender eliminator on yesterday, looks great! I love my new ZX-6R, you were right this thing is amazing! Rides and handles like a dream....
Awesome man! Yeah this thing is a street slayer 👍
Bro, your channel is so underrated. Amazing job man. Wish you the absolute best!
Thanks man! 👍
just ordered it, can't wait to try it out !! Thanks for sharing this tutorial with us !!
Dude, love the your detailed walk through explanation(s)….. “How Too” thanks bro!👍🏻👍🏻
I love that bike too! And great videos, you're really good at explaining everything thoroughly and easily.
Thanks man!
Whats the music playing in the background at 12:10
I think you can use tape to hold those four bolts to temporarily and remove them one by one to fix them.
Bro you’re a G! You’re making all the work i did easy for me without having to think how im gonna do it! Appreciate you!
Good! Glad I could help 👍
Thanks for the help I just got a 2024 zx6r! Installing the kit tomorrow
Awesome man! Happy to help 👍
Just did mine. Thanks again for your video!
I love your vids bruh, so great and so informative, now you got me thinking of doing these also on my 2024 zx6r heh, wonder if you also noticed the horns on our bikes are too quiet.. thinking of changing it too.. if you have any plans changing it, please do make a vid as well. Thanks!
Honestly I have not pressed my horn yet now that I think about it lol I'm gna do that tmrw and see what it sounds like. I'm curious now! Thanks man!
Good video. I’ve been looking to get a tail tidy but didn’t want to lose turn signals and get an integrated tail light. This is a good way to get rid of the bulkiness and still comply with the law that states the turn signals need to be 12 inches from each other.
Thanks man! Yeah I'm beyond impressed with this kit, the price is right and it looks great
I went ahead and used the lower bolts , and re-used the side reflectors to place on top . The bike looks Sexy! thank you brother for showing how 🤙🏻💪🏻
Awesome man, no problem! 👍
Quick tip to those who want to use the factory lights inside of them, there is a plastic piece you can take out and put back in once you put that rubber piece onto the tail tidy
Nice job! Looks neat. They dont ship to sweden tho. Darn it. 😢
The same one I got. Still haven't gotten a chance to get out and try the wheelies.
Nice! This is a great little tidy. Gotta have those mastered by summer! 👍
Question can you leave the servo for the exhaust in without getting a servo buddy and it not throwing a engine light when you get a exhaust upgrade like a M4 slip on
It has so many steps 😵💫. I got it from China for my 2024 ZX6R for like USD 30. I would just go to my dealer and pay another 30 bucks to install it 😂
I'm confused about how to remove the servo.. it's unclear where to loosen the cable before removing it.
I have a video on zx6r exhaust questions, in that video I show you where and how to remove everything 👍
Just wanted to thank you for the simple explanation and tips on how to do this. I bought the same bracket and just installed it with the help of this video while also using your exhaust video to remove the servo cables. Thanks again
Awesome! 👍
Hey Bud. I was watching your video about taking the servo cable only on the servo with your after market exhaust. Did you got any check engine light lately since you install the ebay exhaust?
Nice video thank you!
I’m trying to decide between this and Indian Scout bobber I know total different bike
Any suggestion
Well Indian is announcing a new scout model on April 2, so I think we should wait and see what it looks like. Supposedly a new high hp engine, shorter wheelbase, different frame, it sounds like a totally new bike
Can you tell me what the servo is about? I’m new into this and was just wondering what the purpose of the servo is.
It's a butterfly valve in the exhaust that opens and closes relative to the throttle position. It's for emissions purposes 👍
@@lovelivegofast Thank you!
Great video, thanks!
👍
I bought my zx6r with the Eliminator without any turn sinals any idea where could i buy turn sinals to fit the bike?
www.kawasakipartswarehouse.com/oemparts/p/kawasaki/23037-0551/lamp-assy-signal-led-rr-rh
www.kawasakipartswarehouse.com/oemparts/p/kawasaki/23037-0552/lamp-assy-signal-led-rr-lh
They are $115 each if you want the exact OEM Kawasaki signals. I would go aftermarket if I were you
Heyy quick question! So i just got rid of the servo wires for new exhaust. In your video you said if the servo gets removed the check engine light will come on. Im also going to install fender eliminator. Will moving the servo turn the check engine light for me or should it be fine?
As long as the servo is still plugged in, the cables can be taken off and you won't get any check engine light
You know what would be cool?
A vid showing how to properly install a USB port!
I'll add it to the list! 👍
Thank you!
Hey bro, what exhaust is that or what mods have you done to your 636?
I have de-catted the factory header, put that no name link pipe and muffler on, and the ECU has a Moore Mafia tune on it. I have videos on everything, check out the channel, links are always in the description for all parts used 👍
The bolts were so hard and awkward but it was so worth the struggle!
Yeah it's a process lol but it works and all goes together and looks great 👍
Thanks 🙏
I'm actually thinking on getting this fender eliminator for my zx6r .. but I don't know if I should get any after-market turn signals or leave the ones from factory ... do you know any good aftermarket turn signals?
You could get whatever signals look best to you and then just splice them to the wire and connectors of your factory signals, so it's plug and play then
Thanks ... ride safe 🏍
U too man 👍
@bikesandbangs wts up bro ... I tried to change mine, but I instead of the factory signals I got an after market signals, when I installed it I notice they were not working good.. so I put back the factory signals , but now they not flashing, not even on the dash .. do you think I messed up something??? 😅😅😅... heeeeelp !!!
Did the aftermarket ones have connectors that plugged straight into the bike or did u splice them onto the harness and connector of the factory signals?
Your servo was supposed to go under the silver piece when you put it back I watched before you took it off
You are correct, I just saw that. Since I don't have the servo cables anymore it kinda just mounts anywhere under the seat. Good eye 👍
@1:54 wassup lil tree rat? :)
Haha I didn't even notice him zip across when I was editing this. Sure enough, little guy wanted some of the spotlight 🐿️
Indonesia hadie❤
Why do so many manufacturers do this? The new Harley Sportster is the worst offender.
Beats me man
You explained so well that I watched it once. 🫡
SQUIRREL 🐿️
Little buggers are out of control