Thank you so much for taking the time to create this video. It was incredibly helpful for me as I'm experimenting and testing to find the right formula for my cement bowls. It was challenging at first to understand the need for adding sand to the cement, especially since we don't have a ready-made mix like Cementall here in Bulgaria. Your insights have been invaluable in guiding me through this process.
Thank you so much,for vidioès,your so good at explaining how to do things, you are a lovely person, hope you do not mind me asking,how do i make coasters for hot drinks, and do i nead to add àny thing else to the cement, and what paints i use for marble effect. Regards Bonny.
Thank you for watching and your kind words! I have made coasters before by pouring the cement mixture into a coaster mold from Amazon. Same measurements I do a 1 to 3 ratio (1 part water 3 parts concrete). You can either apply sealer to make the coaster water proof or I have also not sealed and the condensation soaked into the concrete. That part comes down to preference. I hope that helps!
I will try my first project. Thank you for your videos. They are very inspiring specially if you are just starting and afraid of fail or give up. Bless.👌🏽👌🏽👌🏽👌🏽💝😎
Thank you for sharing your videos Iv owned my business now for 8yrs Making & Selling The Safest Soy Candles + Soy Melts in the world plus various 100% Natural body Products & I can’t wait to give making my own Candle holders to my collection, it will obviously save me money due to not having to buy Candle Jars. I’m based in Australia 🇦🇺 Sending Hearts, Hugs, Health & Happiness from Australia 🇦🇺
@@mikelang4191 I'm only interested in black but I'm sure that'll come out gray. I've been experiencing with colored grout and maybe the black dye will make it darker.
@@ajminxy I've been able to get pretty dark grey with the RIT powder. You're not going to get black though. Close but not quite. With black I actually had better luck with the quickset 6000 PSI mortar mix. It's darker than the 9000 PSI cement all.
Thank you so much for making this video! I'm a beginner and have made 4 of the 5 mistakes! I'm getting better thanks to your videos and lots of practice!
Can u make video of cement mistakes i wanna ask why my white cement crack right after its curing ? Nd after demolding it break easily by pressure by hand
Hey, I am from India and having a small candle business. I am using soy wax and concrete jars. But everytime the wax is cold i see cracks on the top and after multiple heat gun application also sometimes it doesn’t become smooth. What mistake am I doing here.
Also you said to make sure to squeeze the container to make sure it does not break so if it breaks it mean that we need to add more cement and less water? Thank you
could you tell me why my diy project, a plant stand, cracked? it set in the mold for 24 hrs, then i removed it, and it needed to cure longer, so i left it another 24 hrs-out of the mold- and it was full of cracks. i used cement-all. i made sure it was pancake batter-like, but i wonder if it because of too much water?
It may be too much water. I usually charge de mold my containers within 2 hours if I need to use the mold for another project. I would say try less water :)
Cement All is actually a grout. It says so on the box. Cement+ water = Cement (basically a glue or binder). Cement + sand = grout (Cement All, stronger than just cement). Cement + sand + aggregates(gravel) = Cement (stronger than grout). It's easier to say cement or concrete when referring to these jars but Cement All is a grout. Knowing that means you can find alternative grouts or making your own.
Hi I’m from Brazil, tnks for your videos. I have a doubt, my candle vessels break when I light the candle. I use cemente Portland. What can I do about?
Portland cement doesn’t have any aggregates, you need to add sand to it. The proportions usually are 1 part Portland cement, 4 parts sand, 1 part water. Hope it helps!
Hi! You can purchase titanium dioxide and this will give you the white color :) I have a video on my channel covering this. The link is also in the description box for this. Hope that helps!
I have used 4:1 and 3:1. I usually eyeball it as I add water. You want a "Pancake like consistency " not too runny but not too thick. Hope that helps! If you are having cracks I would try less water
Thank you, so did you say you just used cement all and water? Is the water distilled water or we can use tap water? Again thanks for this video it has helped me for my future projects..
Oh no! I would recommend keeping your containers to dry in a cool place not humid at all or too hot. Also be sure not to use too much water as this can cause shrinkage as the container drys. :) Hope this helps!
@@fx6446 I use polycrylic. I tested it for heat resistance along with seeping into the candle and it has passed the tests for me. I always recommend doing your own testing though. :)
Hiiii thank you soo much for the video. I'm a beginner and haven't started anything in the candle business, planning to start. what suggestion u would give me as to what should I do the testing and should I start with jars or with the molds. I'm a little bit confused about what would be better. i hope u guide me with this
Hi! I personally started with jars and then moved onto make my own containers. However pouring the candle is going to be very similar in each container so it really depends it you want to have more labor making your containers or ordering them. Hope that helps!
Hi! Thanks for watching! Currently I don't have any recipe or other Concrete that I have personally used however I am looking at other options as far as mixing a concrete mix and if this goes well hopefully I will be able to post a video soon about it!
If it dropped from a significant distance then yes most will break. You can put a cork bottom on a schedule that may help! Anything but plastic if dropped may break. Thanks so much!
Thanks for watching! I'm not sure as I haven't really found anything else that works well for me. I would recommend making sure you have a cement and sand mixture . Maybe test out a few :)
@@prabhneetkaur8643 hi! I test by burning each different type of container I make all the way down to the bottom to ensure no leaking into the concrete and a good wick size. I have drop tested my containers and as most containers they will break if you drop them high enough and they land the perfect way. However I have dropped mine from waist height and they don't shatter. May get scratched but that's it. I would recommend getting your "recipe" together and then test each container :) I hope that helps!
Hi, your videos are nice and clear and helpful. i have just made my first concrete candle container with the plan to pour candle wax directly into it. I had planned to paint over it with acrylic paint but wondering if i can paint it on the inside also and maybe using a sealer over it. After watching these videos i perhaps should have added the acrylic to the concrete mixture instead.
Have a question cause I see another people doing it so I just want to know what you think do I have to cure in water for 24-48 hrs after getting out jar of the mold ?Love your video. Thank you
Oh no! Don't give up! It took me a long time and honestly sometimes I make some with bad air bubbles. I would check how much water you are using and how fast you are pouring. Use less water and pour slower and see if that helps :) Pour in layers and tap
after the container has set after 3 hours, do you apply the sealer automatically after or how long should someone wait before adding the sealer minimum?
Hi! I use Polycrylic for my sealant. I would say make sure you are also not adding too much water and to stir the concrete for a good two minutes or so before pouring :) hope that helps!
Thank you so much. I’m a new candle-maker and I’m fed up with the expense of nice , unique candle containers. I want to try making my own. Where do you buy the molds? I heard of a company called Modern Craft Labs. Does anyone have any suggestions on where to buy molds?
I have heard people buying from them yes. I personally buy from Amazon and haven't had any issues. All my links are in the description box of my videos :) hope that helps!
Hii, I already make like 5 terrazzo concrete coaster with white cement. It came out really smooth! but once I sand it, it appear a looooooot of tiny hole. I already tried to put less water and its just the same 😢 Can I have an advice please?
I am making an updated video this next week and should be up in the next two weeks. I would recommend watching videos and test! If there is something specific you need help with feel free to reply back and I can try to help :) Thanks for watching!
Thank you for the tips! Do you know where to get non toxic fragrance? I heart eos don't stay so it's better to use fragrance. I can't find any good websites. Thx
When I’m stirring my cement it’s like a dark grey. Do you use white powder or the grey? I can never tell how much paint is in it because it’s hard to see in the mix. I think I end up doing like you said, weakening the container with the amount I try to use to change the colour.
@@WizeOwlCandles hey, I use white portland cement< i tried doing a pot today and the whole thing shattered :0( i'm not sure if I'm meant to add sand to it or my mixture was thin ( though it didn't seem watery ) I used to use jesmonite before but then found it hard to get hold of x
Hi! I have tested out my containers with both acrylic paint and the sealer. Nothing comes off during the burning the candle :) also I use 100% soy wax so the wax doesn't get as hot as paraffin. That may help as well!
Hello :) Made some cement vessels for soywax candles and they cracked a bit when the candle was burning? Has that ever happened to your vessles? Thanks
Hi! It did at the start of my candle making. Usually it was because my consistency was too thin before pouring the concrete into the mold. Hope that helps!
Hello, I made a cement flower pot, but after I added dirt and planted the plant, within 24 hours the container cracked, what caused that? Note that I did not use sand with the mixture
Hi, Kala You said you leave the concrete for about 24 hours to cure and then apply the sealer. Then, after another few hours, you pour the wax. --My question is, doesn't the concrete have to be fully dry before sealing it? I, for one, wait 4 to 6 days for my concrete vessels to dry, and only then do I apply the sealer. It would be great to eliminate the drying stage and have my candles ready faster. Thanks a lot. BTW, I've read all the comments to see if someone has asked this question before. 🤣
Hi! Currently right now I wait 24 hours before applying sealer then another 24 hours to pout the wax. I personally haven't seen a difference in structure waiting more days. I hope that helps! :)
Concrete is a mixture of cement, water and aggregates, such as sand, coarse gravel or crushed rock. Grout is often used to fill the spaces between tiles after the adhesive mortar below them has dried.
www.amazon.co.uk/CTS-CEMENT-MANUFACTURING-120020010-Cement/dp/B000OV8NXQ?ref_=d6k_applink_bb_marketplace Try this link above- it has listed other cements that are similar to cement all on amazon.uk
Thank you so much for your video! Vessels can be very expensive and I want to try and make my own. If you want to make them white do I put white acrylic paint in the mix?
What are your tips for when putting the sealant on , the brush strokes doesn’t show? How do you get a nice and clean finish? I use the sponge brush and a regular soft bristle brush, however the strokes still show 😕
Great video and helpful information. Is it necessary to seal the container with polyurethane if using it for a candle? I’ve tested it without and haven’t noticed any wax leakage.
It isn't necessary if you are testing and there is no leaking. :) I don't use polyurethane, I use Polycrylic. But you don't need to if your containers aren't leaking :)
@@WizeOwlCandles Thanks for the reply. Sorry, I meant Polycrylic and not polyurethane (auto-correct got me). I'll continue to test without applying Polycrylic - trying to keep my brand and candles as organic as possible.
@@TonicMercantile I totally get it. I am testing out some new sealants so I will post about it if they work well :) trying to come up with some other options
@@WizeOwlCandles awesome - will look for that video! I"m going to test boiled linseed oil (you can get it at Lowes/Home Depot). It's safe and organic. I've used it to seal cedar planks I used to create elevated garden beds and it worked out great. It does take a while (1+ days) to dry though.
Your explanation was so clear and thank you for the tips and tricks. I'm from London, UK and will also be making my own candle jars, all the videos that I've come across are USA based and you all use Cement All. Do you know of another brand that I'd be able to get in the UK that would still work like Cement All. I'm very new to this and hope to make my first one soon. Thank you in advance xx
Hi! I'm not sure what a different brand as I only use cement all. However you can buy small.portions and test it out :) just stick with concrete not pure cement.
Hello! Love your channel! In uk they don't have cement all so I'm struggling to make my vessels - they keep seeping through :( I do all the steps and use white portland cement with sealant. Any idea what I may be doing wrong?
Hi! Pur cement you don't want to use. You want it mixed with sand that helps the sturdiness of the container. I would try a mix of the cement and some sand to see if that helps:)
hi! I bought the cement all brand today and tried it out for the firs time with my molds. I bought the green one (it says rapid set concrete), but it looks like you use the blue? There are some small rocks in it which make it harder to pour.. is yours like that?
@@WizeOwlCandles ah okay, they actually didn't turn out bad with the one I used.. couldn't tell there were rocks.. but I'll deff try the blue out when I buy next, thanks!
Thank you so much for taking the time to create this video. It was incredibly helpful for me as I'm experimenting and testing to find the right formula for my cement bowls. It was challenging at first to understand the need for adding sand to the cement, especially since we don't have a ready-made mix like Cementall here in Bulgaria. Your insights have been invaluable in guiding me through this process.
I'm so glad it was helpful! Thank you for watching!
Thank you so much,for vidioès,your so good at explaining how to do things, you are a lovely person, hope you do not mind me asking,how do i make coasters for hot drinks, and do i nead to add àny thing else to the cement, and what paints i use for marble effect. Regards Bonny.
Thank you for watching and your kind words! I have made coasters before by pouring the cement mixture into a coaster mold from Amazon. Same measurements I do a 1 to 3 ratio (1 part water 3 parts concrete). You can either apply sealer to make the coaster water proof or I have also not sealed and the condensation soaked into the concrete. That part comes down to preference. I hope that helps!
I will try my first project. Thank you for your videos. They are very inspiring specially if you are just starting and afraid of fail or give up. Bless.👌🏽👌🏽👌🏽👌🏽💝😎
Thank you so much!
I get holes in the cement when I take them out of the mold
Try tapping the sides of the container and getting all those air bubbles out when pouring :)
Try tapping on the sides of the mold during pouring to help release the air bubbles :)
Thank you for sharing your videos
Iv owned my business now for 8yrs Making & Selling The Safest Soy Candles + Soy Melts in the world plus various 100% Natural body Products & I can’t wait to give making my own Candle holders to my collection, it will obviously save me money due to not having to buy Candle Jars.
I’m based in Australia 🇦🇺
Sending Hearts, Hugs, Health & Happiness from Australia 🇦🇺
How cool! Soy candles are the way to go 🌿🙌 thanks for watching!
Hey Aaron I’m from Australia but what sealant do you use? I want to do a few things for my house 😂
Thanks so much for you tips☺️
Of course!
Try powdered RIT dye for coloring your concrete. It's cheap and works well.
Thank you! I've been using direct colors pigments and they are amazing:)
I'll try this
@@ajminxy red is really hard though. Usually comes out pink.
@@mikelang4191 I'm only interested in black but I'm sure that'll come out gray. I've been experiencing with colored grout and maybe the black dye will make it darker.
@@ajminxy I've been able to get pretty dark grey with the RIT powder. You're not going to get black though. Close but not quite. With black I actually had better luck with the quickset 6000 PSI mortar mix. It's darker than the 9000 PSI cement all.
Thank you for sharing. I have just subscribed to your channel. Love and greetings from Pretoria,.South Africa 🇿🇦💝🌻
Hi! Thanks for watching!! 🙏
Thank you thank you
You're welcome!
Thank you so much. Really easy to listen & follow 😎
Thanks for watching!
Hello how do you clean your mixture container easily?
I use my sink but I don't have any residue on the containers. I try to get all the concrete chunks off before rinsing :) soap and water
Thanks!!! very helpful!!!
You are very welcome!
I can pour the wax without sealing the container?
No you need to seal it before pouring tye wax
Thanks for the tips! I'm a beginner, your videos are super helpful!
I'm glad they are helpful :)
Thank you so much for making this video! I'm a beginner and have made 4 of the 5 mistakes! I'm getting better thanks to your videos and lots of practice!
I'm so glad they are helping :) it takes practice, you got this!
Thank you! I am also a beginner and love the tips.
I am glad they help!
Can u make video of cement mistakes i wanna ask why my white cement crack right after its curing ? Nd after demolding it break easily by pressure by hand
I use concrete not cement, the concrete has additives to help with strength. It may help with some additives :) like sand
I’m having trouble making the bottom smooth…and suggestions? Please help
Sandpaper. Or don't fill the mold all the way to the top just shy of it and then you shouldn't have a rough bottom
Thank you for the advice
Can i make a container of plaster with out using cement for candles
I have seen people do this :) I just don't have any tips as I have never done it.
These tips are so helpful! Thank you 😊
Absolutely! I am glad they were helpful :)
Thank you ❤🌷
watching this before i start, thank you for the tips ! love how well you explain things, thanks for sharing
Absolutely! Thank you!
Almost 1000 subscribers!!! Keep up the good work Kayla!!
Thanks!! ☺️
Thanks ❤️ you're TH-cam channel is soooo helpful for me 🥰
I'm so glad :) thank you for watching!
Hey, I am from India and having a small candle business. I am using soy wax and concrete jars. But everytime the wax is cold i see cracks on the top and after multiple heat gun application also sometimes it doesn’t become smooth. What mistake am I doing here.
Also you said to make sure to squeeze the container to make sure it does not break so if it breaks it mean that we need to add more cement and less water? Thank you
I just test it out after i make my batch to make sure it is good. If it does break yea less water more concrete . :)
Thxxx💓
You are very welcome !
could you tell me why my diy project, a plant stand, cracked? it set in the mold for 24 hrs, then i removed it, and it needed to cure longer, so i left it another 24 hrs-out of the mold- and it was full of cracks. i used cement-all. i made sure it was pancake batter-like, but i wonder if it because of too much water?
It may be too much water. I usually charge de mold my containers within 2 hours if I need to use the mold for another project. I would say try less water :)
Hi, can the sealant inside the container affect the hot throw of the candle? thank you
Do you water cure your pots?
No I have tested it out and I personally didn't see a difference in strength.
These are great tips! Thank you so much!
Absolutely! Thank you got watching
Soo helpful thank you 🙏
Thank you for watching!
Do you have any suggestions for making terrazzo concrete?
I don't! Something to look into though :)
@@WizeOwlCandles I heard the product they use is called jesmonite resin.
@@edgargarciahernandez2476 interesting! Thank you for sharing. I will have to try this out.
@@WizeOwlCandles yes indeed. It's on my to do list.
Cement All is actually a grout. It says so on the box. Cement+ water = Cement (basically a glue or binder). Cement + sand = grout (Cement All, stronger than just cement). Cement + sand + aggregates(gravel) = Cement (stronger than grout).
It's easier to say cement or concrete when referring to these jars but Cement All is a grout. Knowing that means you can find alternative grouts or making your own.
Thanks for the comment! 🙌
@@WizeOwlCandles your vessels are amazing btw!
Hi I’m from Brazil, tnks for your videos. I have a doubt, my candle vessels break when I light the candle. I use cemente Portland. What can I do about?
I haven't personally tried that type of cement. I use Cement All. I would recommend a concrete mix :)
Portland cement doesn’t have any aggregates, you need to add sand to it. The proportions usually are 1 part Portland cement, 4 parts sand, 1 part water. Hope it helps!
hi.. can you please tell about sealers
I personally use Polycrylic. A lot of people have their own personal preference :)
May I know the dimension of the cylinder mold
Hi! 3x3.5
how do you make grey concrete become white? in Cyprus we only have grey concrete
Hi! You can purchase titanium dioxide and this will give you the white color :) I have a video on my channel covering this. The link is also in the description box for this. Hope that helps!
Hi
I have started making my concrete vessels,and have experience cracking with some of them.
What it the ratio?
I have used 4:1 and 3:1. I usually eyeball it as I add water. You want a "Pancake like consistency " not too runny but not too thick. Hope that helps! If you are having cracks I would try less water
Hi love your video. Would you mind sharing what you use as a sealant please
Hi! Thanks for watching! I use a water based sealer
Thank you, so did you say you just used cement all and water? Is the water distilled water or we can use tap water? Again thanks for this video it has helped me for my future projects..
Hi! Thanks for watching! I have used both tap and distilled. I have noticed distilled water performs better, less bubbles:)
What sealant are you using ??
Hi! I am using polycrylic a water based sealant. I have seen other good ones like earth safe and Rutlands used as well
Thanku😌
You are very welcome!
God Thanks. I want to try just fun. What kind of coat do u use?
Hi! It definitely is fun :) I use Polycrylic on mine
Great video Kayla!
Thank you!
Thanks so much for this! My question is...how do you get a nice white vessel? Do you colour your cement-all or buy white cement?
Hi! I use titanium dioxide to color the cement :)
Hi, my vessel was great, but after 4 or 5 days it cracked by it self, I have no idea why?
Oh no! I would recommend keeping your containers to dry in a cool place not humid at all or too hot. Also be sure not to use too much water as this can cause shrinkage as the container drys. :) Hope this helps!
Do we need to seal the cement so the wax won't get sucked?
I seal so that the candle wax doesn't seep though the concrete. It also helps prevent cracks
@@WizeOwlCandles what seal do you use? Is it transparent and does it exhume chemicals? Thanks so much
@@fx6446 I use polycrylic. I tested it for heat resistance along with seeping into the candle and it has passed the tests for me. I always recommend doing your own testing though. :)
Hiiii thank you soo much for the video. I'm a beginner and haven't started anything in the candle business, planning to start. what suggestion u would give me as to what should I do the testing and should I start with jars or with the molds. I'm a little bit confused about what would be better. i hope u guide me with this
Hi! I personally started with jars and then moved onto make my own containers. However pouring the candle is going to be very similar in each container so it really depends it you want to have more labor making your containers or ordering them. Hope that helps!
Hey,what if we make it with black cement.Will it lead to the cement container to crack with the heat of the wax?
I've never tried black cement but you xan try! I recommend concrete though not just cement. So mix sand in if it is just black cement :)
@@WizeOwlCandles what should be the ratio of sand and cement
Grazie 😊
You are welcome!
Which sealing do you use ( it has to be fire resistant or water base) thank you
th-cam.com/video/91bsZAgU8yo/w-d-xo.html I made a video about a sealer:)
Thank you so much. Have you ever made terazzo chips to add to your cement vessels?
I haven't yet!! This is definitely on the list :)
Thank you ! How does you jar doesnt crack when you take it out the mold?
I haven't really had that issue it has to do with the consistency when you pour. You don't want it too thin :) thanks for watching!
How do I wipe the containers to give them a clean finished look (after pouring the wax)
You can wipe the containers with a wet washcloth. :) Thanks for watching!
@@WizeOwlCandles Thank You 🙏🏽
@@WizeOwlCandles and your videos are amazing by the way youre really inspiring ❣️
@@NylaaMadeEm thank you so much! I will be adding some new videos the first week of January with new updated tips too! 🙌♥️
What can we use other than CementAll? Any recipe? I need some things that quick dry please, if u know how to do it please make a video 🙏
Hi! Thanks for watching! Currently I don't have any recipe or other Concrete that I have personally used however I am looking at other options as far as mixing a concrete mix and if this goes well hopefully I will be able to post a video soon about it!
is it okay for a concrete tray/coaster to break if it falls on the floor ?
btw thank you great tips !
If it dropped from a significant distance then yes most will break. You can put a cork bottom on a schedule that may help! Anything but plastic if dropped may break.
Thanks so much!
@@WizeOwlCandles thank you so much ❤️
Kala is there any chemical which can enhance cement strength?
I'm sure there is. I just never had to use it with my products
Thank you for sharing.
You're welcome! Thanks for watching!
Hello, What do you for concrete? Because my concrete need 6-7 days to hard. Where is it problem? Im so sad :(
I use cement all :)
What is the best sealant that you recommend?
Hi! I actually posted a video about this today! -
th-cam.com/video/91bsZAgU8yo/w-d-xo.html
Everything u have explained is so clear. Thanks for sharing. Just a question what can I use if I don’t get Cement All? Thanks
Thanks for watching! I'm not sure as I haven't really found anything else that works well for me. I would recommend making sure you have a cement and sand mixture . Maybe test out a few :)
@@WizeOwlCandles Thanks a lot for ur reply. Appreciate it.
@@WizeOwlCandles could u please let me know how or what are the ways that u check for the quality or like how do u test ur products? Thanks
@@prabhneetkaur8643 hi! I test by burning each different type of container I make all the way down to the bottom to ensure no leaking into the concrete and a good wick size. I have drop tested my containers and as most containers they will break if you drop them high enough and they land the perfect way. However I have dropped mine from waist height and they don't shatter. May get scratched but that's it.
I would recommend getting your "recipe" together and then test each container :)
I hope that helps!
@@WizeOwlCandles Thank you so very much I really appreciate. This is so helpful can’t thank you enough. 👍🏻😊
Hi, your videos are nice and clear and helpful.
i have just made my first concrete candle container with the plan to pour candle wax directly into it. I had planned to paint over it with acrylic paint but wondering if i can paint it on the inside also and maybe using a sealer over it. After watching these videos i perhaps should have added the acrylic to the concrete mixture instead.
Hi! I would say if you do paint the inside to seal it twice at least :)
I am experiencing cracking of my vessels,what am i doing wrong?
I would try to make your mix with less water and see if that helps :)
How many candles do you think can be made with a 25lb cement all box?
Depends on the mold. I would say I've been able to get 50 -60 of the cylinder molds out of the 50 pound bag
Thank you!
Where are you finding your molds? And do you know anywhere that makes or sells larger ones?
I find them on Amazon :)
Is a water-based acrylic sealer good?
Yes that is what I use :)
I have a concrete vessel that the candle won't stick to the sides what do I do?
That's strange. What do you mean it isn't sticking to the sides? Are you using a sealant on the inside?
@@WizeOwlCandles yes ma'am I'm using everything you said to use from concrete to sealer.but it only does that with only kind of my vessel.
@@WizeOwlCandles its not adhering to the sides once candles is ready and firm
It may be the temp you are pouring at or the sealer you are using. I know this comment was a bit ago so I hope you were able to figure it out! :)
Have a question cause I see another people doing it so I just want to know what you think do I have to cure in water for 24-48 hrs after getting out jar of the mold ?Love your video. Thank you
Hi! I personally do not do water baths some people like to do them however I have not found them required with mine. :)
Thank you!! So much for fast response!
Hello, do you lubricate silicone molds with oil before pouring concrete?
I personally don't have to lubricate them. I have heard of people using vegetable oil :)
I’m getting frustrated. I’m getting bad air bubbles on the rim. I bounce my mold tap it and even use my vibrating machine. I’m ready to give up. 😩
Oh no! Don't give up! It took me a long time and honestly sometimes I make some with bad air bubbles. I would check how much water you are using and how fast you are pouring. Use less water and pour slower and see if that helps :) Pour in layers and tap
@@WizeOwlCandles thank you! I appreciate your response! 🙏
Thank you for this video very helpful 🤍
You are very welcome!
Also, what sealer do you recommend?
I use a water based sealant called Polycrylic
Love your videos. I just started making concrete vessels for my candles. What sealant do you use? I accidentally bought a wood sealer!
Hi! I use polycrylic. Technically it is a wood sealer however all my testing has shown it works great on concrete too :)
Could these be used for planters? Have you tried eco waterproofer? I have polycrylic hopefully I can make some for my aloe
Hi! Yes I use these for planters. My sealer is water based, I have heard of earth safe sealer too that is popular :)
after the container has set after 3 hours, do you apply the sealer automatically after or how long should someone wait before adding the sealer minimum?
I usually wait at least 24 hours :)
Hi I’m a little late on this video , but I was wondering how can I avoid cracking when lighting my candles with the vessels ? What sealant is best
Hi! I use Polycrylic for my sealant. I would say make sure you are also not adding too much water and to stir the concrete for a good two minutes or so before pouring :) hope that helps!
Awesome tips !
Thanks! I'm glad it helped:)
I want do my small business but I’m scared 🥺
It can be scary but you got this! Chase your dreams :)
Thank you so much. I’m a new candle-maker and I’m fed up with the expense of nice , unique candle containers. I want to try making my own. Where do you buy the molds? I heard of a company called Modern Craft Labs. Does anyone have any suggestions on where to buy molds?
I have heard people buying from them yes. I personally buy from Amazon and haven't had any issues. All my links are in the description box of my videos :) hope that helps!
Hii, I already make like 5 terrazzo concrete coaster with white cement. It came out really smooth! but once I sand it, it appear a looooooot of tiny hole. I already tried to put less water and its just the same 😢 Can I have an advice please?
Hi! I haven't personally made terrazzo yet but I eiuld say try stirring the concrete more before pouring to release bubbles and see if that helps :)
@@WizeOwlCandles Alright, thank you ! Will try it tonight 💖
Help me!!!!! Ive triedddd to do like thousand times. But it doesnt go well. 😭😭 . Help me
I am making an updated video this next week and should be up in the next two weeks. I would recommend watching videos and test! If there is something specific you need help with feel free to reply back and I can try to help :) Thanks for watching!
Does the cement all come already mixed or you mix it with sand?
Cement all is already premixed :)
@@WizeOwlCandles thank you very much
Thank you for the tips! Do you know where to get non toxic fragrance? I heart eos don't stay so it's better to use fragrance. I can't find any good websites. Thx
I use candlescience for my candles :) thanks for watching!
When I’m stirring my cement it’s like a dark grey. Do you use white powder or the grey? I can never tell how much paint is in it because it’s hard to see in the mix. I think I end up doing like you said, weakening the container with the amount I try to use to change the colour.
I don't currently use anything to lighten it. Just cement all. I know some people use white concrete.
@@WizeOwlCandles hey, I use white portland cement< i tried doing a pot today and the whole thing shattered :0( i'm not sure if I'm meant to add sand to it or my mixture was thin ( though it didn't seem watery ) I used to use jesmonite before but then found it hard to get hold of x
Una pregunta, le pones a tus moldes algún tipo de aceite o desmoldante antes de verter tu mezcla ? Saludos desde 🇲🇽
Sorry I am not able to translate.
@@WizeOwlCandles he is asking if you coat your moulds with some oil or something else before you pour the cement.
@@oldbexleysoapco.8500 Thank you! I don't coat the mold prior to pouring the cement
Are there any toxic fume concerns with the cement sealer or the acrylic paint when heated by a candle?
Hi! I have tested out my containers with both acrylic paint and the sealer. Nothing comes off during the burning the candle :) also I use 100% soy wax so the wax doesn't get as hot as paraffin. That may help as well!
Hello :) Made some cement vessels for soywax candles and they cracked a bit when the candle was burning? Has that ever happened to your vessles? Thanks
Hi! It did at the start of my candle making. Usually it was because my consistency was too thin before pouring the concrete into the mold. Hope that helps!
Hello, I made a cement flower pot, but after I added dirt and planted the plant, within 24 hours the container cracked, what caused that? Note that I did not use sand with the mixture
Iam sorry, I could not understand your words because my listening language is weak
It could be just the cement used. I used cement only and it didn't work out. Cracked and was weak. You want concrete or a sand mix with cement
@@WizeOwlCandles i use the construction cement only with water
@@WizeOwlCandles thank you
For flower pots, you need to leave it to ‘cure’ for at least a week, otherwise it will crack easily due to the moisture.
Hi, Kala
You said you leave the concrete for about 24 hours to cure and then apply the sealer. Then, after another few hours, you pour the wax.
--My question is, doesn't the concrete have to be fully dry before sealing it?
I, for one, wait 4 to 6 days for my concrete vessels to dry, and only then do I apply the sealer. It would be great to eliminate the drying stage and have my candles ready faster. Thanks a lot.
BTW,
I've read all the comments to see if someone has asked this question before. 🤣
Hi! Currently right now I wait 24 hours before applying sealer then another 24 hours to pout the wax. I personally haven't seen a difference in structure waiting more days.
I hope that helps! :)
@@WizeOwlCandles Thank you! 🤗
What is concrete? Is it the same as grout?
Concrete is a mixture of cement, water and aggregates, such as sand, coarse gravel or crushed rock. Grout is often used to fill the spaces between tiles after the adhesive mortar below them has dried.
I would recommend concrete
Thank you. Its just confusing as we don't get Cement All here in South Africa
Can someone tell me what cement I can use in the UK that matches the cement all?
www.amazon.co.uk/CTS-CEMENT-MANUFACTURING-120020010-Cement/dp/B000OV8NXQ?ref_=d6k_applink_bb_marketplace
Try this link above- it has listed other cements that are similar to cement all on amazon.uk
At the top of the link see the section "consider these items" - these look similar to cement all. Testing is going to be your best friend though :)
Thank you so much for your video! Vessels can be very expensive and I want to try and make my own. If you want to make them white do I put white acrylic paint in the mix?
I did white acrylic paint for a while. I'm going to be trying something new and posting about it. But I am trying titanium dioxide
@@WizeOwlCandles thank you
What are your tips for when putting the sealant on , the brush strokes doesn’t show? How do you get a nice and clean finish? I use the sponge brush and a regular soft bristle brush, however the strokes still show 😕
I use a foam brush. I usually have to go over the sealant multiple times to smooth it out. I use Polycrylic. What sealant do you use?
Great video and helpful information. Is it necessary to seal the container with polyurethane if using it for a candle? I’ve tested it without and haven’t noticed any wax leakage.
It isn't necessary if you are testing and there is no leaking. :) I don't use polyurethane, I use Polycrylic. But you don't need to if your containers aren't leaking :)
@@WizeOwlCandles Thanks for the reply. Sorry, I meant Polycrylic and not polyurethane (auto-correct got me). I'll continue to test without applying Polycrylic - trying to keep my brand and candles as organic as possible.
@@TonicMercantile I totally get it. I am testing out some new sealants so I will post about it if they work well :) trying to come up with some other options
@@WizeOwlCandles awesome - will look for that video! I"m going to test boiled linseed oil (you can get it at Lowes/Home Depot). It's safe and organic. I've used it to seal cedar planks I used to create elevated garden beds and it worked out great. It does take a while (1+ days) to dry though.
Your explanation was so clear and thank you for the tips and tricks. I'm from London, UK and will also be making my own candle jars, all the videos that I've come across are USA based and you all use Cement All. Do you know of another brand that I'd be able to get in the UK that would still work like Cement All. I'm very new to this and hope to make my first one soon. Thank you in advance xx
Hi! I'm not sure what a different brand as I only use cement all. However you can buy small.portions and test it out :) just stick with concrete not pure cement.
Hey, did you ever find a good brand of cement in the UK?
Hello! Love your channel! In uk they don't have cement all so I'm struggling to make my vessels - they keep seeping through :( I do all the steps and use white portland cement with sealant. Any idea what I may be doing wrong?
Hi! Pur cement you don't want to use. You want it mixed with sand that helps the sturdiness of the container. I would try a mix of the cement and some sand to see if that helps:)
@@WizeOwlCandles indeed thank you! I do add sand but will try to change the ratio maybe :)xxx you're the best
Do you weight the 4:1 ratio or just eyeball it?
The 4:1 ratio is recommended by the manufacturer. I've measured it so many times I personally eyeball the consistency at this time
When to squeeze it? Right after you unmold it or after its totally set?
When you squeeze test it I would say let it sit for a few days after applying the sealant. Just to test the strength
@@WizeOwlCandles thanks a lot
Absolutely!
hi! I bought the cement all brand today and tried it out for the firs time with my molds. I bought the green one (it says rapid set concrete), but it looks like you use the blue? There are some small rocks in it which make it harder to pour.. is yours like that?
I use the blue because it doesn't have the rocks :)
@@WizeOwlCandles ah okay, they actually didn't turn out bad with the one I used.. couldn't tell there were rocks.. but I'll deff try the blue out when I buy next, thanks!
@@patrickconnelly1158 that's awesome!