What setting are you using for just white prints? Mine seem to want to come out nearly transparent.. so far the tech support hasn't been too helpful. Thanks..
Use a small funnel with tubing attached to it that will fit into the ink reservoir. But maybe their design is to make sure that solid particles aren't introduced by forcing you to use the syringe.
I saw a video that showed the container with the ink bottles placed on it's side to initially fill the bottles. I think this would work and allow the use of a funnel to fill the bottles.
I tried this..thinking the same thing. The ink all spilled into the container making a huge mess...it actually says not to turn the ink container on it's side for this reason.
How close does the air purifier need to be to the top of the curing oven? I put mine very close and it sucked my print to the top of the curing oven and ruined it. I'm having a hard time finding any information on it! My office is a small closed space so I want to make sure I'm doing it correctly. Also what settings does it need to be on? There are 3 options on the purifier.
I want this printer. But I’m so used to my MacBook now. What computer brand do you use with this printer? Thank you for the video. I’m glad I watched it so I know what to expect.
I would start with buying transfers and then probably wait until I could get either an STS 724 or Epson F2270 (BY20 hasn't been out long enough to say). They are high priced but this is one case where you get what you pay for
I am interested in this printer but i was wondering about the maintenance. If i print once a day for three days a week would that be fine? And how long can i leave it alone before it clogs? I am going to use it at the workplace which i dont have access to on the weekends
No, you really need to print every day - even if it's just a nozzle check. If you can't print daily you are likely going to run into a issues that will take hours to resolve. If you can't print every day, a White Toner printer is a better option. www.silhouetteschoolblog.com/p/uninet-icolor-560-printer-and-pro-rip.html
@@SilhouetteSchool thanks for thr quick reply. I was thinking about syoring this in my garage but i am worried about the temperature fluctuations. I think white toner might be the best option for my case even though i really want the dtf
You can not turn the ink container on its side. The ink will flow into the container itself and create a massive mess..it actually specifically warns in the master class video not to turn the container on its side.
I absolutely love you. Your videos are super informative. I always come to you before i buy any machines haha. Thanks to you i have the roland bn20a. 😊. Out of all the DTF printers i think im getting the roland. Ill stick with roland.
Ideally you need to print daily - even just a nozzle check. If you are routinely not going to print pretty much everyday I would reconsider if you a DTF printer is right for you. A better option may be to purchase the DTF transfers.
I saw a video that showed the container with the ink bottles placed on it's side to initially fill the bottles. I think this would work and allow the use of a funnel to fill the bottles.
Hi no - most rip softwares for DTF is not. However, the Epson F2100 is a DTF/DTG printer that is Mac and PC compatible. You can learn more here shrsl.com/46h96
I just received my Uninet 100 on Monday but I can’t add the ink until I take the 30 minute Q&A session. If I add it before, it will void my warranty. First available date is January 3, 2024 😡😡😡😡😡
Yes I just heard this was happening and I agree with you - waiting two months is completely unacceptable. I have expressed my concern to Uninet about this and am encouraging them to at least offer group sessions if they are going to require this until they can catch up.
@@SilhouetteSchool I called yesterday and the only thing they could tell me was “if we have any cancellations, we will reach out to you”. I’m so annoyed and once you take everything out of the original packaging, it cannot be returned.
They actually just emailed me yesterday and said they are making changes by offering small group sessions to great decrease the wait time. They should be reaching out early next week to reschedule with you
I just got approved for this printer,Ty
Congratulations! Wishing you great success in your DTF journey!
Filling the ink wasn't as bad as I thought it would be. My first DTF printer so I had nothing to compare.
I really want to see those wash test Melissa. I'm in the market to buy one of the 3 you have demonstrated.
How does it compare to the prestige A3+R
What setting are you using for just white prints? Mine seem to want to come out nearly transparent.. so far the tech support hasn't been too helpful. Thanks..
Use a small funnel with tubing attached to it that will fit into the ink reservoir. But maybe their design is to make sure that solid particles aren't introduced by forcing you to use the syringe.
I saw a video that showed the container with the ink bottles placed on it's side to initially fill the bottles. I think this would work and allow the use of a funnel to fill the bottles.
I tried this..thinking the same thing. The ink all spilled into the container making a huge mess...it actually says not to turn the ink container on it's side for this reason.
How close does the air purifier need to be to the top of the curing oven? I put mine very close and it sucked my print to the top of the curing oven and ruined it. I'm having a hard time finding any information on it! My office is a small closed space so I want to make sure I'm doing it correctly. Also what settings does it need to be on? There are 3 options on the purifier.
I keep it almost directly connected...but I also keep that little vent on top of the oven partially closed
Hey!! Can you help if printer is printing purple instead of blue
Thank you for the detailed information.
I want this printer. But I’m so used to my MacBook now. What computer brand do you use with this printer? Thank you for the video. I’m glad I watched it so I know what to expect.
I use this Dell to run all my printers that are PC only. amzn.to/45yRY5T #afil
@@SilhouetteSchool thank you 😊
How is the maintenance on the UNINET? I'm looking into buying the UNINET 1000!
DTF definitely requires maintenance, but the 1000 has a white ink circulation system which helps!
What dft would you bye if it was your first one
I would start with buying transfers and then probably wait until I could get either an STS 724 or Epson F2270 (BY20 hasn't been out long enough to say). They are high priced but this is one case where you get what you pay for
Can you print from a roll or does it have to be the separate sheets
The Uninet 100 is sheet fed only. The Uninet 1000 is the roll option shrsl.com/4degd
Why don't you use a tilted funnel?
I am interested in this printer but i was wondering about the maintenance. If i print once a day for three days a week would that be fine? And how long can i leave it alone before it clogs? I am going to use it at the workplace which i dont have access to on the weekends
No, you really need to print every day - even if it's just a nozzle check. If you can't print daily you are likely going to run into a issues that will take hours to resolve. If you can't print every day, a White Toner printer is a better option. www.silhouetteschoolblog.com/p/uninet-icolor-560-printer-and-pro-rip.html
@@SilhouetteSchool thanks for thr quick reply. I was thinking about syoring this in my garage but i am worried about the temperature fluctuations. I think white toner might be the best option for my case even though i really want the dtf
flip the ink container on it's back with opening facing up. And just funnel that way
You can not turn the ink container on its side. The ink will flow into the container itself and create a massive mess..it actually specifically warns in the master class video not to turn the container on its side.
Any videos on the 1000 version?
Unfortunately I do not have the 1000 so I don't have any videos on it
Hi I have a Uninet 100 and I had to replace the ink station and now my print comes out white only no other color. What I need to do to fix this issue?
I would recommend reaching out to Uninet for this issue.
I absolutely love you. Your videos are super informative. I always come to you before i buy any machines haha. Thanks to you i have the roland bn20a. 😊. Out of all the DTF printers i think im getting the roland. Ill stick with roland.
How is the maintenance on this printer? If I don't actually print for a week, is the ink circulation enough?
Ideally you need to print daily - even just a nozzle check. If you are routinely not going to print pretty much everyday I would reconsider if you a DTF printer is right for you. A better option may be to purchase the DTF transfers.
Maybe a flexible funnel - if they make one….otherwise I would love this printer.
If you can find a flexible funnel with a VERY small tubing it could work
@@SilhouetteSchool this may sound silly but could you use like a bendy straw? seems like a lot of work and making me second guess this printer..ughh
I saw a video that showed the container with the ink bottles placed on it's side to initially fill the bottles. I think this would work and allow the use of a funnel to fill the bottles.
Is the software MAC compatible?
Very sad that your site doesn’t ship to Canada 😢
I am not a reseller or retailer so I don't ship anything anywhere ;) I just provide information and it's available anywhere.
Dose it have any warranty
Yes, it comes with a 12 month warranty.
Why didn’t they add a way to fill directly from the bottle like the Epson eco tank printers? The syringe filling makes it a no for me.
is the software for this printer compatible with IOS?
Hi no - most rip softwares for DTF is not. However, the Epson F2100 is a DTF/DTG printer that is Mac and PC compatible. You can learn more here shrsl.com/46h96
I just received my Uninet 100 on Monday but I can’t add the ink until I take the 30 minute Q&A session. If I add it before, it will void my warranty. First available date is January 3, 2024 😡😡😡😡😡
Yes I just heard this was happening and I agree with you - waiting two months is completely unacceptable. I have expressed my concern to Uninet about this and am encouraging them to at least offer group sessions if they are going to require this until they can catch up.
@@SilhouetteSchool I called yesterday and the only thing they could tell me was “if we have any cancellations, we will reach out to you”. I’m so annoyed and once you take everything out of the original packaging, it cannot be returned.
They actually just emailed me yesterday and said they are making changes by offering small group sessions to great decrease the wait time. They should be reaching out early next week to reschedule with you
@@SilhouetteSchool This would be awesome! I hate that I have my machine here and setup but can’t use it. Thank you so much.
Dont buy it, UNINET technical service is very poor
Would never recommend! Only have owned 6 months and support is awful mostly. Everything has broke .