1964 Galaxie Wheel Combos and Install

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 มี.ค. 2022
  • What wheel will fit in your classic Ford? There’s more to the answer than you might think!

ความคิดเห็น • 35

  • @samharper4289
    @samharper4289 ปีที่แล้ว +1

    I've had a few 64 Galaxies, and I put 15×8 Cragars with 295 50x15s on the rear. Tires were a bit too big for the wheel, but never had an issue with it, and I drove all over the west coast. There is alot of wheel well space on those Galaxies! 😉

  • @lancejenkins9908
    @lancejenkins9908 7 หลายเดือนก่อน +2

    Rocking 12.5 × 28 ×15 on the Rear w/ Mickie Thompson sportsman pro tires. I'm not doing a rear tire on the road. Either calling AAA or going and getting my trailer to get it home or a shop. Good video my brother keep em on he road.

  • @keithbryant4252
    @keithbryant4252 ปีที่แล้ว +2

    These cars were jacked with a bumper jack which allowed the rear axle to droop farther and if you flip your shackles it will drop even farther l personally have placed L60 15 on my 63.5 galaxie which are wider and they are on 9in rims

  • @jerryadams5994
    @jerryadams5994 2 ปีที่แล้ว +1

    Helped man thank you

  • @B1Springfield
    @B1Springfield 3 หลายเดือนก่อน +1

    15x8 with 4.5 backspace. 275/60. Factory Jack or a trail Jack, lifts the car from the rear bumper which lifts the car correctly to have the space to install/remove

  • @davidkeeton6716
    @davidkeeton6716 11 หลายเดือนก่อน +1

    I have to sneak in my 235/70/15 BFG on 8" 3.5" bs Cragar SS under my 64. Thinking about getting some shock extensions for the bottom of the air shocks and maybe that will let the shocks extend and let the rear end droop a bit further. I'm also thinking about flipping my shackles. Maybe. I like my car to sit with the bottom of the fender just above the rim. The front sits higher now, with aluminum heads, intake, headers, aluminum radiator, waterpump 3G alternator, race starter. It raised it about 1.5"-2".

  • @12x2richter
    @12x2richter 3 หลายเดือนก่อน

    The only way I got my 18" wheels on was to jack both sides and let the axle drop all the way down. That just means a second jack probably on the side of the road.

  • @andythebest4632
    @andythebest4632 ปีที่แล้ว

    I think your issue is your jacking point. Your jacking it from the spring perch. I have issues on my 62 with stock rims where i have to lift from the frame and let the axle drop all the way down before installing. I haven’t thought about the rolling technique i might give that a try next time.

  • @90lx86svo
    @90lx86svo 5 หลายเดือนก่อน +2

    Was the 3" backspace special order? Seems Vintiques website doesn't show it

    • @virginiagalaxie697
      @virginiagalaxie697  5 หลายเดือนก่อน

      I actually got them on market place. Guy wanted 15x10s and was selling the 15x8s

    • @90lx86svo
      @90lx86svo 5 หลายเดือนก่อน

      I called vintiques and they are not doing custom wheels now. Maybe later this year

  • @twinfin8867
    @twinfin8867 ปีที่แล้ว +2

    Hello. I too will need to be able to change tires on the road. Great info. Thank you;
    Where can i get wheels like you did (15x8 & 15x7) with your same backspacing ? ?

    • @virginiagalaxie697
      @virginiagalaxie697  ปีที่แล้ว +1

      They are wheel vintiques, available through summit.

  • @johnbarlow8208
    @johnbarlow8208 2 ปีที่แล้ว +3

    Been trying to get the best tire and rim size combo for my 64 also, so found this vid at the perfect time. What did you end up with on the front of your car? You did a great job explaining how to get that tire on and off for that rear. Thank you.

    • @virginiagalaxie697
      @virginiagalaxie697  2 ปีที่แล้ว

      15x7, 21570r15 on the front

    • @johnbarlow8208
      @johnbarlow8208 ปีที่แล้ว

      I went with a 225/60R15 in front and the 255/60R15 in the rear. So happy with the way they look, and no rubbing in the front. Thanks again. Your 64 looks awesome.

  • @brandonion5647
    @brandonion5647 ปีที่แล้ว

    I got a 61 Galaxie and was thinking about going 215/70 or 215/75 on the front and 235/70 or 235/75 or 255/70 for the rears. I got 15 inch Cragars with a 4.1 backspacing any thoughts?

  • @rjk629
    @rjk629 7 หลายเดือนก่อน

    Those look perfect for what i want. Are they 255/60r15 or 255/70r15?

  • @brandonray2644
    @brandonray2644 ปีที่แล้ว

    We’re did you get your back wheels from? Parts number?

    • @virginiagalaxie697
      @virginiagalaxie697  ปีที่แล้ว

      Wheel vintiques. Summit Carrie’s them. 15x8 3.5 bs

  • @sammyvices2547
    @sammyvices2547 10 หลายเดือนก่อน

    What’s size tire are you running in the rear 255/?/15

  • @erickquinones1095
    @erickquinones1095 4 หลายเดือนก่อน

    What wheels are those

    • @virginiagalaxie697
      @virginiagalaxie697  4 หลายเดือนก่อน

      Wheel Vintiques Series 62. Summit Racing Carrie’s them. They also have a seller on eBay.

  • @mojojojo2881
    @mojojojo2881 4 หลายเดือนก่อน

    I put 18x8s with 225/45/19 and so many people on the galaxie pages were chirpping they won't FIT......wheel and tire sizing is some kinda Voo doo that people don't understand

    • @virginiagalaxie697
      @virginiagalaxie697  4 หลายเดือนก่อน

      Yep… people just can’t put together overall size with wheel and tire size. The wheel
      And tire calculator is so easy to use.
      Your tire size with 19s is exactly the same size as
      Mine with 15s.

  • @frizzellracing
    @frizzellracing ปีที่แล้ว

    I’d buy those 10” wheels if you still have them

    • @virginiagalaxie697
      @virginiagalaxie697  ปีที่แล้ว

      They are 5 on 4 3/4… Chevy. They’re available but won’t fit in a ford.

    • @frizzellracing
      @frizzellracing ปีที่แล้ว

      @@virginiagalaxie697 ah ok. I miss understood I thought they where for your Galaxie

    • @virginiagalaxie697
      @virginiagalaxie697  ปีที่แล้ว

      Oh they were… one of my regrettably idiotic moves. Bought them without confirming the bolt pattern.

  • @randydixon4139
    @randydixon4139 ปีที่แล้ว

    you use the factory bumber jack.............

    • @virginiagalaxie697
      @virginiagalaxie697  ปีที่แล้ว +1

      Agreed… but who’s going to tear up their $1000 bumper with a bumper jack.

    • @davidkeeton6716
      @davidkeeton6716 11 หลายเดือนก่อน

      Get the lightest jack that you can get from Jegs or Summit maybe even Harbor Freight. Then drill the frame of it like they used to drill EVERYTHING on a gasser. Don't get stupid and weaken it too badly. Then you can haul it around. Put it on the right rear like a battery or in the center. Remember it's a spare. Get a light rim, front drag wheel and tire or a rare light spare from an, what was it? 80s or 90s Ford car.