Thanks alot dear engineer GOD pless actually I have learned alot from your lectures concerning power wizard controler wirings, and realy you have enlarged my mind in doing so, therefor I want to upgrade my knowledge in synchronization or parallel connection diagrams to multigensets . Your truthfully Genset Mechanic Shamesddin
Thanks alot dear engineer GOD pless actually I have learned alot from your lectures concerning power wizard controler wirings, and realy you have enlarged my mind in doing so, therefor I want to upgrade my knowledge in synchronization or parallel connection diagrams to multigensets .
Your truthfully
Genset Mechanic
Shamesddin
Thank you sir if you have some questions just ask i van guid you bless u
Welcome sir bless u
Boss pwedi bang manual configuration ang module na ito?
Good job idol.iba talaga ang talent mo hirap tularan
Bless you lodi
cod morning thanks for information i have two gen.500 kva in the seam pipe deasil is ok or no make problem ?
If same pipe what are the size of the pipe and how is your deasel thank its elivated? Or same ground level!
Dear main pip 1 ench and for each generate 1/2 ench
It should bhe 3/4 two pipe i take and return should be elivated the external fuel tank
If 1/2 make sure the fuel presure or gravity can push the fuel coz it make problem like ear catch
Fuel presure low
I need soft copy of this training can I get it?
Yku can download in the internet
Emcp 1.1 phase sequence incorrect alram coming in. Faults how to turn off this in settings please tell thanks
Use multi meter to check check the comnection RYB if in correct posation and equal voltage
Good day po Sir, may I ask what is the cause of the powerwizard controller with a model: EMCP 4.1 of our genset has no display?
Make sure all connextion is correct and the fuses
And also double check the configuration
Sir ask ko lang paano po makakuha ng programing software ng ganitong controller.
Thanks Godbless po
Need sofeware sir doon pwedi mo sya e save
@@benzblogsVlogs paano makakuha ng software sir.
Cat controller 4.2 need software ..don't have software nothing doing change enaything.if you need software must v prachge..I am right sir ..???
Yes for cat
Boss pano pag ayaw mag ilaw ng panel board pero okay na ang connections?
Bago ba ang module
Bagong installation ba
Fg Wilson 550 kva Problem off after start alarme BOC L2 under and BOC L3 under and BOC Gen v enbal
Avr check voltage its low adjust in correct level output alarm gone
@@benzblogsVlogs I installed a new AVR but the problem remains the same
@@benzblogsVlogs Maybe the problem in iG -AVRi or iG-AVRi TRANS/LV what you think
@@BilalElectromechanical-vf4os if your using comap there is avri make sure its connected correctly and make sure all fuses are in good vondation
@@benzblogsVlogs iG AVRi and iG AVRi transe/LV .What is their job explained to me