Welcome back and that looks beautiful Now. Good job on everything you guys are amazing. The 3-D printer thing. I probably couldn’t even even hook up the printer love your channel. I’m glad you guys are getting there cause it looks really good. The boat looks beautiful.
Sailing Dauntless family hi from Alberta, Canada ( directly north of Glacier National Park Montana).. The ceiling panels look absolutely amazing, but I've come to expect that quality of wok from you. That kitchen and salon area are outstanding. It's always such a pleasure to watch you work. The correct materials, tools and knowledge to take on a project of this size and complexity. The new ceiling panels are proof of that. Bonus you are a great family to watch the humor and kidding around are awesome. Cant wait for next week. Thanks for including us in your journey.
15:30 As someone who is prone to making these kinds of mistakes. I have found that a good practice especially in things that you LITERALLY get one shot at is to fully install this onto a piece of scrap plywood or card board or just anything that you can find that matches the surface somewhat to figure out if you have it right before committing to a permanent installation like this. 😅😁 17:40 Another tip for 3d printing is to print stuff like this on an angle even if it means more ugly supports and difficulty printing it'll make the part much more durable making the layer lines on an angle. That way when you are drilling and side loading those teeth the loading force won't be perfectly in line with a layer line and letting it snap off like that. 👍😁
Everything is starting to look FAB... This boat is going to mean more to you than any production line could because a part of you is in it, especially Todd's blood.
We have a saying here at our home: "It's not a home improvement project unless somebody's bleeding." And we are always doing home improvement projects. Starting to buy bandages by the gross! Haha! Good job Dauntless crew. It's coming together nicely.
I have a Bambu X1 Carbon. I use PLA for most interior and ASA for exterior. Keeping them dry is the key. I may do an episode in the future on it, it is very easy to use the printer, the steep learning curve is 3d modeling software. For that I use Fusion 360, they have a free personal use version.
Great video, as always! We have a Leopard 45 with just Velcro on the ceiling panels… can you share the link for the vendor of the clips? Also, I assume you used Southco locking latches? Was there a specific vendor there you’d recommend? Love your videos!
Thank you! The clips are from fastmount and yes the latches are from southco but we purchased them from another owner so unfortunately I don’t have a vendor recommendation.
I absolutely would not use 3m rattle can adhesive. You should have purchased a gallon of glue from an upholstery supply along with a $18 harbor freight paint gun. With the real upholstery adhesive you can let the adhesive completely set before applying the vinyl to the substrate and they you use a steamer to reactive the adhesive as you work everything into place. The easy way to make replacement ceiling panels would have been to get the cad drawings of the roof panels from Leopard/Robertson & Cane and cut out new panels in minutes using a cnc router.and a gerber textile cutter to precut the vinyl.
Like to ask. What exactly does an American flag with a red stripe mean? Is that being disrespectful? Just like to know because I support democracy. You have it visible, so I would think you have a reason. Thanks
Your boat will be better bilt than most that come from the factory
Very clean job, well done🎉
Looks Amazing
Very nice job, well done.
You guys can fabricate my anything anytime so good to watch you guys as a ream
Just saw this new release! You are baaaack!!😊
Turned out perfect ! Very professional great you redid the first panel, you would have kicked yourself
Love the content! PS thank you again for frying up the Mahi Mahi I caught when we got back to dock with Acali!
Thanks! And you’re welcome, it was delicious!
It looks wonderful! You all are a joy to watch.
Haven't seen a new video for some time now. I hope that all is well.
Glad to see you guys back online doing some great projects.
It looks awesome 👌
Welcome back and that looks beautiful Now. Good job on everything you guys are amazing. The 3-D printer thing. I probably couldn’t even even hook up the printer love your channel. I’m glad you guys are getting there cause it looks really good. The boat looks beautiful.
Looks spectacular, great job family. Ticking the boxes off the list🤟🏼🤟🏼🤟🏼
That ceiling looks perfect! Congratulations!
Good to see you guys back on the tube!!
Sailing Dauntless family hi from Alberta, Canada ( directly north of Glacier National Park Montana)..
The ceiling panels look absolutely amazing, but I've come to expect that quality of wok from you. That kitchen and salon area are outstanding. It's always such a pleasure to watch you work. The correct materials, tools and knowledge to take on a project of this size and complexity. The new ceiling panels are proof of that. Bonus you are a great family to watch the humor and kidding around are awesome. Cant wait for next week.
Thanks for including us in your journey.
Thank you for watching and the support!
You have been missed
Looks great! Welcome back to the channel.
15:30 As someone who is prone to making these kinds of mistakes. I have found that a good practice especially in things that you LITERALLY get one shot at is to fully install this onto a piece of scrap plywood or card board or just anything that you can find that matches the surface somewhat to figure out if you have it right before committing to a permanent installation like this. 😅😁
17:40 Another tip for 3d printing is to print stuff like this on an angle even if it means more ugly supports and difficulty printing it'll make the part much more durable making the layer lines on an angle. That way when you are drilling and side loading those teeth the loading force won't be perfectly in line with a layer line and letting it snap off like that. 👍😁
good tip
what filament are you using with your 3D print?
Happy to see you back. Missed your video's
Salon Looking Great almost ready for a Party 🤩🤩🤩🤩🤩🤩🤩🤩
Bloody hell, I get notified a day after you have been out and I checked your page🤣🤣🤣 get back into it guys🤙🏼🤙🏼🤙🏼🇦🇺🇦🇺
Thank you!
Everything is starting to look FAB... This boat is going to mean more to you than any production line could because a part of you is in it, especially Todd's blood.
That salon has really come together nicely. It’s starting to look like it was built that way.
What material did you print the parts with
looking good team keep up the great work !!!
loooking gooood
So happy y’all are back! Have missed y’all
Ty knocking it out of the park as per usually…
Glad to see you back!! I loved the witty banter and I look forward to next week's offering.!!
Love seeing it come together. ❤love seeing your videos more though
Thank you
Missed you guys
Well done guys ,YOU DID IT....she looks amazing.
We have a saying here at our home: "It's not a home improvement project unless somebody's bleeding." And we are always doing home improvement projects. Starting to buy bandages by the gross! Haha! Good job Dauntless crew. It's coming together nicely.
👍🏼
The panels look great! You have been missed!
👍✅🏝Looking great!👏
Thanks 👍
Thumbs up on the ceiling panels.
Yay a new video! What vinyl did you guys use for the ceiling panels?
its the same that the factory uses, it has a felt backing on it. I can't find the invoice for it but I did purchase it locally in Florida.
A paper towel and electrical tape my go to for band aid too!
I missed you guys! How is the energy consumption of the Air conditioning units?
Pretty good so far. We will be putting energy meters on and reporting back.
Thanks! I'm sure you both are happy with your daughter's help.
Curious what 3d printer you use and if you have written a blog or post about it and the materials you have found best to use in a marine environment?
I have a Bambu X1 Carbon. I use PLA for most interior and ASA for exterior. Keeping them dry is the key. I may do an episode in the future on it, it is very easy to use the printer, the steep learning curve is 3d modeling software. For that I use Fusion 360, they have a free personal use version.
@@SailingDauntless thank you for your reply
Ceiling absolutely looks amazing.
Time to give your video editor a rai$e per episode
When does the sailing happen?
When the fixing is done happening 😉
Great video, as always!
We have a Leopard 45 with just Velcro on the ceiling panels… can you share the link for the vendor of the clips? Also, I assume you used Southco locking latches? Was there a specific vendor there you’d recommend?
Love your videos!
Thank you! The clips are from fastmount and yes the latches are from southco but we purchased them from another owner so unfortunately I don’t have a vendor recommendation.
check McMaster Carr part # 4921N11
That looks amazing guys! Hey, are you planning on attending Annapolis again this year? If so, i would love to meet up and chat about your refit.
Possibly!
I absolutely would not use 3m rattle can adhesive. You should have purchased a gallon of glue from an upholstery supply along with a $18 harbor freight paint gun. With the real upholstery adhesive you can let the adhesive completely set before applying the vinyl to the substrate and they you use a steamer to reactive the adhesive as you work everything into place.
The easy way to make replacement ceiling panels would have been to get the cad drawings of the roof panels from Leopard/Robertson & Cane and cut out new panels in minutes using a cnc router.and a gerber textile cutter to precut the vinyl.
4:09 ... Someone's got a lil bit of an attitude.
Where did you get the clips you used?
various online retailers. Fastmount is the brand
Where did you buy the ceiling panel clips / studs? What is the company called that makes them?
Fastmount
What no led lighting?
It’s daytime, we put the lights in in a previous episode
I know this boat WAS wrecked, but that was years ago now. Are you ever going to sail it?
absolutely, when its ready
No more holes in Kim's boat.....OK?
So does sid have a significant other just asking I know a guy !
Almost as beautiful as you pretty lady.
Like to ask. What exactly does an American flag with a red stripe mean? Is that being disrespectful? Just like to know because I support democracy. You have it visible, so I would think you have a reason. Thanks
It represents patriotism and support for firefighters.
The USA is not a democracy it is a Republic