Briggs V-Twin Intek Popping and Backfiring?? Fix It! (Camshaft Replacement)
ฝัง
- เผยแพร่เมื่อ 21 เม.ย. 2018
- In "Uncle Andy Is A Genius", Taryl goes over how to fix a Briggs and Stratton V-Twin Intek engine that is running rough, backfiring, popping and sputterin'. Taryl covers that and more in this video but prior to and after the fix, local customer Uncle Andy suddenly becomes highly intelligent and helps Taryl around the shop until his brainpower wears out, see it all here in another funny and informative how-to video from yur pals at Grass Rats Garage!! Now There's Your Dinner!!
Pick up all your TARYL APPAREL here: www.tarylfixesall.bigcartel.com
(T-Shirts, Coffee Mugs, Shop Products and More!) Shippping worldwide and daily!
LIKE Taryl on FACEBOOK! / tarylfixesall
He's on INSTAGRAM too postin' daily @tarylfixesall
#briggsandstratton #vtwin #intek #intekengine #tarylfixesall #grassratsgarage #smallenginerepair #camshaft #camshaftreplacement #ridingmower #smallengine #vtwinengine #twincylinder #twincylinderengine #mower #lawnmower #lawnmowerrepair #mowerrepair #diy #howto #funnyhowtovideos #uncleandy #sodapopkid #sodapop - แนวปฏิบัติและการใช้ชีวิต
![ภาพนี้ก็ฮาเหมือนกันนะเนี้ย #1 SS8 [ พากย์นรก MEME.EXE ] | easy boy](http://i.ytimg.com/vi/Ytc50m91QK8/mqdefault.jpg)
Be sure to pick up YOUR Taryl Apparel Today! Shipping Worldwide Daily.
www.TARYLFIXESALL.BIGCARTEL.com
And There's Your Dinner!!
Taryl Fixes All i neeeed some help I have the same engine but I took the heads off because it bend a rod for some reason so I thought maybe something sirve the valves but now that I seen your video and it was having the same symptoms so not I know it’s the camshaft but I need help with where to find the part for model- 406777 and type 0128-E1
Is there any other reason that particular engine would have those symptoms besides a cam problem
I plan on getting some tee shirts in a few days... How about a shirt with that Deere Mower ya shot the arrows in?
Are the briggs professional series the Same engine?
Hey I enjoy your content I have a brigss 19 hp craftsman t2200 it runs great but when I cut it off it sounds like it has a knock... only when I cut it off. Any ideas?
...for those of you who might not appreciate the humor, don't just watch a couple minutes and write Taryl off as an oaf who isn't a first-class repairman...this guy REALLY knows his stuff...and is a very good, thorough, teacher..really goes through the details... :)
I enjoy a laugh while I work and just having fun make a great place to work and keep employees to
Taryl is awesome.
I find my self coming back as I enjoy watching the program..
'Terodactyl here!! HAHA..
He makes learning fun.
😊☺️😏😀😃😄😁😆😅😂🤣😅😂🤣
Taryl all I can say is YOU ARE A GENIUS!!!! You know more about small engines than anyone I have ever met. Your videos are excellent and entertaining. Love to meet you someday. Keep up the great work. Now there's your dinner. PS Tell Slippers to go get a real job before he gets killed loitering in your shop. LOL
Great camera work! It is nice to see a repair video by someone who KNOWS what they are doing. Thanks
I agree on the great camera work and I can see very good what he’s talking about
Another great video by Taryl!
I like the videos of replacing internal parts and how to line things up and settings etc. It makes for a proud moment when it starts and runs like it's supposed to.
I'm gonna look through more of your videos and see if you have anything about the older opposed twin Briggs engines. I have a 2001 model (that I got used last year). It's a 17hp I/C engine that I put on the back of our Snapper RER. Plenty of power when it runs right but I think it stopped pumping fuel a few days ago. I checked the fuel tank and it's not clogged up. I'm going to go through everything real good and give it a good checkover. Gonna check the valve clearance for one, it was popping before it stopped on me too...
Like someone else mentioned, I'm glad I didn't write you guys off at the beginning. That was a very in-depth 33 minutes worth watching including some nuances not mentioned in some other videos I've seen. I learned these engines are prone pushing valve guides out, bending push rods and worse if gotten too hot. You may have mentioned that in a previous video, not sure. But when you pulled the rods and they were straight I can see why you immediately when to the cam issue and you were correct. Experience! Well done.
*Taryl Fixes All* I look forward to all your videos. Your skits are funny, engine repair skills and tips are an excellent bonus.
How do you fix a engine that runs wide opening at idle on a 23hp briggs intex v twin
Great videos! I recently picked up a L120 with 80 hours on it that has been sitting for about 5-7 years. Carb was gummed up something awful. Watched a few of your videos. Very helpful and informative!! Going to tackle the drive belt and pulleys next.
Once again great job guys! I truly enjoy the comical skits and the knowledge that you provide. Keep up the great work!
I been watching you for a while now. I learned a lot and laugh all the time at the beginning and end of your videos. I now have 3 snowblowers working and I am working on the 4th because of your videos. Thanks!!~
Man, you are a unique individual. But, your skill set and knowledge is amazing.
Thank you, good sir.
Great video. Loved every minute. Lots of us out here with those Briggs engines. Thank you sir.
Like your videos. Very entertaining and very informative. The blues background music was an added bonus. Thank you for taking the time!
The Dactyl saves the day again. I got one doing the exact same thing on an 04 Simplicity. I asked a few people, they had no clue, looked it up and sure enough it took me to my favorite lawn mower man, originally I thought it was a blown head gasket, now I know I need to start sourcing a cam. Thank you.
This video fits the bill. I've got one of these and just finished repainting everything...holy cow what a chore and still waiting on my deck parts to come in.
Really fascinating, but I was lost in space at minute 25 😂 The more I dive into the lawn mower engines I get confused. Sometimes I’m sure having understood but than again feel unable to reassemble the parts. I am happy to be able to clean the carburetor after having watched several of your videos. Thanks, greetings from Germany and I pay your dinner 🥘
Fantastic video, nice to see the guts of the V-Twin. For the seal I'd use my Simatool Fitting tool FT33. Makes for professional mounting of bearings and radial shaft seals.
Came across this today: Love the intro's to your videos Keep up the good viewing and teaching!!!
It would be really helpful to have a list of parts needed in the description, not necessarily part numbers or where you got them but a simplified list like which gaskets and stuff. Your videos are awesome. Thank you for your help.
"I like the way you talk" Good show Taryl, good information.
love your videos! super helpful also great to see people have a good since of humor while educating people. keep up the great work👍🤓
i do have an issue with a 15 hp kohler it won’t start and it has a popping sound coming through the carburetor.i think the camshaft is bad because i’ve changed the head and all other possibilities all is left is the cam.do you have a video on this problem or some advice? would greatly appreciate it thanks
Very well done guys!
Love the sound effects can t help but smile through the whole video.
Very Inspiring! We have a lotta small engines that need fixin around here. We watch closely for your great tips! New subscriber!
Taryl is a good actor, and an exceptional mechanic.
You did a great job man I am really impressed thank you for the information.
Great work Tarly thanks for sharing your great knowledge always very interesting
There's your dinner. Thank you. I actually have this problem with a JD mower, we been looking into getting a new engine but you probably just saved us that money. Also it has an electronic solenoid that is on the carb, which I just replaced on a Kohler courage Thank you again
"We're not going to the moon. We're not going to the international space station. We're just trying to cut the grass." Haha I love it! I can't wait to use that quote!
Great how to video. Funny too I don’t see how somebody could give you a thumbs down. Anyway good job fellas keep them coming.thumbs up 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Very informative , great refresher since I haven't worked on one in many many years . Thanks
That's awesome!! Great video!! I found a box last night and it had a pro parts direct catalog in it and my valve spring compressor that I've been looking for. They're a good company to do business with. I've had great service so far.
We had a V-Twin come in with the exact same issue, backfiring, sputtering at high speed only. The problem turned out to be a hairline crack in the fuel pump impulse tube. Keep on making those great videos! Keith's Bike & Mower Co., Mundelein, IL.
This is a really helpful video
It’s awesome how this channel is entertaining and informational
Thanks for the video, I’ve noticed this problem with a lot of the snowblowers I fix. Most of them have the OHV Powermore or LCT engines. I clean or replace the carburetors and always bore out the low speed jet to prevent surging, however some of the machines pop and backfire and it drives me crazy. Valve adjustments never seem to fix the problem either. I don’t like to sell them in that condition. I’ve scoured the internet for a solution and this video is the closest thing I can find. Might have to rip the engine off of the next one that does it and see if the lobes on the cam shaft are worn down.
That was both entertaining and instructive. Good job!
I love watching your videos - Thank you for the fun learning !
Once again you make it look easy, great video Guys
The seal sounds made me laugh every single time. Awesome video Taryl, thanks!
Hahaha great video guys. Nice camera work!!!
Love your vids, you are very talented. I enjoy learning from you. Keep it up!
Tayrl, I found your Channel looking for info on how to bypass the low oil shut down on a generator, i have watched a lot of your vids, very good info, and the little add on you do with humor is great, absolutely love your channel and now i am subscribed, keep those vids rolling on, or in, whatever the properest term is.
Always informative and entertaining Taryl, greetings from Australia.
Great success! I have a V-Twin Intek that hopefully won't need this repair, but if it does, I know what to do now. Thanks, Taryl!
How's it been reliable since?
@@JohnDoe_88 Just mowed almost an acre with it yesterday. Still works great!
@@engineer2001 well sounds good to me since someone just responded to me from Craigslist to line up the buying that mower engine. It's in a yardman by mtd 42" I just got a new almost an acre property so I could use it
I am proud you are on here you help a lot of people
If you put an end cap on the PVC pipe, it would be easier to tap in the seal. Great video !
Boy you have that engine puuuurrring Great video as always keep them coming.
Thanks for a high quality and informative video.
Greetings from Devine, Texas!!!! 😎👋🏼👍🏼
I just wanted to wish you guys a merry Christmas and I hope everything is well Taryl
Très bon vidéo avec de très bonnes explications et beaucoup d'humour! Bravo!
Very good video with pretty good explanations and a lot of humor! Bravo!
Hey Tara always awesome awesome videos I learned so much from you but just food for thought when I take something apart everybody's got a camera on your phone take pictures along the way before you take it apart and dooring how things go maybe you can pass it on then always seems to work for me thank you keep it up the good work
Great work Taryl. I like your honesty reporting your facts about whatever it is you are working on. Keep up the good work. What's your impression of Honda as it related to small engine durability and repair. What is your favorite small engine (under 20 hp) and why?
Excellent video, thanks for the tips.
Bubba That’s a mighty lOud Happy Dance😁😊❣️ thanks for the how too, video Taryl❣️❣️
I love watching your goofy ass videos. I've learned so much over the last 6 months. Keep up the good work Brother Mutha!
Same here. Since i came across his vidoes i've been able to repair just about anything and before i would just pay to have it done
for real, taryl's pretty cool. i can watch the whole vid and not fall asleep while watching.
Hello. Maybe the people that are saying "top dead center" ar thinking about putting camshaft and crankshaft together if there are no visible signs of alignment, but like you say Mister Taryl there is no need of top dead center to adjust the valves. Take care. You are doing an amazing job. Thanks for all.
Good one. You did a super job on that one. 👍👍👍
Taryl .I love your videos & the knowledge you have. 😆😆👌
That was a hoot. Great info and humour. Keep up the good work
👍”....we’re not goin’ to the 🌙 moon!”
🤣🤣🤣
This guy has forgotten more than I’ve ever known about engines! 👀
👍Awesome video👍
and thanks to uncle Andy, I can NOW finish my time travel thesis 🤓
Thx Uncle Andy👍
A friend called me with the same problem today.this repair may be more than he would be would like.i would do it for him though,thanks mr dactal
Great job that was fun watching
Taryl your videos are the best..
Love your videos, thanks for them. Is there anything else that can cause that popping sound if the lifters seem fine. 22 hp
Good step by step ,for procedures on camshaft overhauled
good videos man , fun and imformative
Nice job with the diagnosis and repair!
Most people don't even know how to diagnose a machine! They guess with you money!💰💰💰💰💰 Some times it never works!😣
I've been successful a few times fixing stuff. Maybe i'm just lucky. ;-)
I know you!
Loving these vids and subbed, can’t believe you don’t have heaps more subscribers, all in time I’m sure!!
Hey Taryl, love your videos! If you read this, please consider doing another video of you riding your minibike!
I’m about to do this job! Awesome video 🤠
very nice work mr taryl
nice job taryl. i enjoyed the video and learned something in the bargain.......thanks
Good Job Taryl!
Great job very informative and entertaining 😂
Love the video editing!
Ha! Best skit ever, that was great! Love your channel, guys. The how-tos are excellent and the production quality is top notch!
My favorite part about your skits is how Taryl always exclaims "Slippers!" in that somewhat disgusted tone; it always gets me!
Thanks for the videos, Taryl and Co.!
love the videos! keep up the awesome work!
That was a good one! I like the Uncle Andy theme song!
AWESOMENESS!!! is all I can say Taryl!
Tary, please do a video on the proper use of wrenches and channel locks, as far as placement when loosening and tightening.
Bear Russell placement should be in your hand. Next.
Always use GM Engine Oil Supplement or similar when replacing a cam shaft or lifters. This helps with break in.
She got no bump Taryl! Seriously though you're a good technician thank you.
Like tbe videos you do things you u do is how it was tought to me old school I miss working on small engine and it's a profession with not a lot of work especially when people usually throw engines away a buy a new one I like refurbishing mostly Briggs and Stratton engines easy to work on but I like a challenges and problem solving
I just love your videos. You learn something while laughing. Lol
Great video learned a lot and got Briggs running angain, Thanks
You need to do a video on setting the governor on the space shuttle !!
u mean the government? that will be a screw job.
You are one of a Few that actually Know WTH they are Doing.
good thing the oil filter is working
Love your videos!
Keep them coming.
You the man Tarly!
Thanks, very helpful video. Love your videos! You guys are hilarious.
love it , you guys are awesome, keep it up!
Another great video from the Tarylmeister! Thanks, Guys!
Great one guys!!!!!!! Thanks!!!!
Great video...
Very informative...Thanks...
I like your video that sandpaper you're referring to as what was left of the camshaft and the reason it didn't hurt the lifter is because the lifters Harden and the camshaft is not Harden properly I've done a few of them I'm enjoying your videos and the critic but when I mentioned it to Briggs & Stratton they told me that I was the only one having that problem got so bad I was popping the lobes off of one cam put them on another. they spline i could be pressed on and off great video great info lack of Maintenance maybe pour oil Maybe poor cam lobe likely keep up the great work what did you all ever do with that Fairbanks Magneto you was playing with I believe you called her an old Wisconsin module